Konica Minolta DI1611 - TWAIN DRIVER, DI2011 - TWAIN DRIVER, Di1611, Di2011 User Manual

$I$I
___________________________________________________________________________
5SER-ANUAL4WAIN$RIVER
Contents
Contents
1 Setting Up PC Scanning
2 Connecting to the USB Port
3 Installing the TWAIN Driver
3.1 Installing the TWAIN Driver Using Plug and Play......................3-1
Installing the TWAIN Driver Using Plug and
Play Under Windows XP ............................................................3-1
Installing the TWAIN Driver Using Plug and
Play Under Windows 2000 .........................................................3-3
Installing the TWAIN Driver Using Plug and
Play Under Windows Me/98 .......................................................3-4
4 How to Scan Document
4.1 Using the Automatic Document Feeder......................................4-1
4.2 Using the Original Glass ..............................................................4-2
5 Common Settings
5.1 Auto Options .................................................................................5-1
6 Error Message
6.1 Original Document Jam................................................................6-1
To clear a misfeed in the Automatic Document Feeder .............6-2
Communication Error..................................................................6-3
Scanner Busy .............................................................................6-3
Read Data Error .........................................................................6-4
Automatic Document Feeder No Paper......................................6-5
Other Machine Error...................................................................6-6
Contents
ii Di1611/Di2011 Twain Driver
Setting Up PC Scanning
1
1 Setting Up PC Scanning
If the enclosed TWAIN Driver is installed on the computer, this copier can be used for to scan documents to a PC.
The following software and hardware system environment is required for PC scanning.
G OS: Windows 98, Windows Me, Windows 2000, or Windows XP G TWAIN-compatible image-processing software (such as, Adobe Pho-
toshop)
G USB V.1.1 (or later version)
1
Setting Up PC Scanning
1-2 Di1611/Di2011 Twain Driver
Connecting to the USB Port
2
2 Connecting to the USB Port
Important!
Be sure to use a shielded USB cable. Use of an unshielded cable may result in radio interference.
1 Make sure that the copier and the computer to be connected to the
copier are turned OFF.
2 Connect one end of the USB cable to the USB port of the copier.
This completes the connection.
Note
USB1.1 is only supported on Windows 98, Windows Me, Windows 2000, and Windows XP.
Connect
Copier
PC
Loading...
+ 15 hidden pages