Konica Minolta 750 User Manual
User’s Guide [Copy Operations]
Introduction
Introduction
Thank you for choosing this machine.
This manual contains details on the operation of the various functions of the
machine, precautions on its use, and basic troubleshooting procedures. In
order to ensure that this machine is used correctly and efficiently, carefully
read this manual before using the machine. After reading the manual, store
it in the designated holder so that it can easily be referred to when questions
or problems arise during operation.
The illustrations used in this manual may appear slightly different from views
of the actual equipment.
Energy Star
®
As an ENERGY STAR® Partner, we have determined that this machine meets
the ENERGY STAR
What is an ENERGY STAR
An ENERGY STAR
ically switch to a “low-power mode” after a period of inactivity. An ENERGY
®
product uses energy more efficiently, saves you money on utility bills
STAR
and helps protect the environment.
bizhub 750/600 x-1
®
Guidelines for energy efficiency.
®
Product?
®
product has a special feature that allows it to automat-
Trademarks and Registered Trademarks
KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging
are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS,
INC.
PageScope and bizhub are registered trademarks or trademarks of KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC.
Netscape Communications, the Netscape Communications logo, Netscape
Navigator, Netscape Communicator, and Netscape are trademarks of Netscape Communications Corporation.
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public
Licence.]
All other product names mentioned are trademarks or registered trademarks
of their respective companies
Introduction
x-2 bizhub 750/600
Introduction
Contents
Introduction
Energy Star® ..................................................................................... x-1
What is an ENERGY STAR
Trademarks and Registered Trademarks ...................................... x-2
Contents ............................................................................................ x-3
Available Features .......................................................................... x-15
Automatically selecting the paper .................................................x-15
Adjusting copies to the size of the paper .....................................x-15
Scanning the document in separate batches ...............................x-15
Copying an original containing various page sizes .......................x-15
Specifying separate horizontal and vertical zoom ratios ..............x-16
Adjusting copies according to the image quality of the original ...x-16
Copying multiple Original pages onto a single page ....................x-16
Sorting copies ...............................................................................x-17
Stapling copies .............................................................................x-17
Punching holes in copies ..............................................................x-17
Center folding/binding ..................................................................x-18
Zigzag folding and folding in three ................................................x-18
Inserting paper between copies of overhead projector
transparencies ...............................................................................x-18
Inserting copies of a different original at a specified location .......x-19
Adding a cover page/insertion ......................................................x-19
Copying with chapter title pages on the front side .......................x-19
Copying with reversed colors .......................................................x-20
Separately copying a page spread ...............................................x-20
Repeating copy images ................................................................x-20
Splitting an original page into two copies .....................................x-21
Making copies for filing .................................................................x-21
Adjusting the image to fit the paper size ......................................x-21
Copying with a layout for center binding ......................................x-22
Erasing sections of copies ............................................................x-22
Printing distribution text on copies ...............................................x-22
Managing jobs ...............................................................................x-22
Programming copy settings ..........................................................x-23
Checking the copy settings ..........................................................x-23
Enlarging the size of text in touch panel screens .........................x-23
Displaying explanations of functions and settings ........................x-23
Interrupting a copy job ..................................................................x-23
Printing a sample copy .................................................................x-23
Explanation of Manual Conventions ............................................. x-24
®
Product? ............................................x-1
bizhub 750/600 x-3
Descriptions and Symbols for Original and Paper .......................x-25
“Width” and “Length” ...................................................................x-25
Paper Orientation ..........................................................................x-25
User’s Guides ...................................................................................x-27
User’s Guide [Copy Operations] <this manual> ...........................x-27
User’s Guide [Network Scanner Operations] ................................x-27
User’s Guide [Box Operations] .....................................................x-27
User’s Guide [Enlarge Display Operations] ...................................x-27
Legal Restrictions on Copying .......................................................x-28
1 Installation and Operation Precautions
1.1 Safety Information .............................................................................1-2
Warning and Precaution Symbols ..................................................1-2
Meaning of Symbols .......................................................................1-2
1.2 Regulation Notices ............................................................................1-9
CE Marking (Declaration of Conformity) for Users of the European
Union (EU) .......................................................................................1-9
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY
DEVICES (For U.S.A. Users) ...........................................................1-9
INTERFERENCE-CAUSING EQUIPMENT STANDARD
(ICES-003 ISSUE 4) (For Canada Users) ........................................1-9
For Users in countries not subject to Class B regulations ............1-10
Laser Safety ..................................................................................1-10
Ozone Release ..............................................................................1-12
Acoustic noise (For European Users Only) ...................................1-12
1.3 Caution Notations and Labels ........................................................1-13
1.4 Space Requirements .......................................................................1-14
1.5 Operation Precautions ....................................................................1-16
Power Source ...............................................................................1-16
Operating Environment .................................................................1-16
Storage of Copies .........................................................................1-16
Introduction
2 Before Making Copies
2.1 Part Names and Their Functions .....................................................2-2
Outside of Machine .........................................................................2-2
Inside of Machine ............................................................................2-5
Options ...........................................................................................2-6
Large Capacity Tray LU-401/LU-402 .............................................2-8
Finisher FS-504/FS-602 (+ Punch Kit PK-505) ...............................2-9
Cover Sheet Feeder PI-501 ..........................................................2-11
Z-Folding unit ZU-602 ..................................................................2-12
Shift Tray SF-601 ..........................................................................2-13
x-4 bizhub 750/600
Introduction
Control Panel ............................................................................... 2-14
Basic Settings Screen (Basic Screen) .......................................... 2-17
Icons That Appear in the Touch Panel ......................................... 2-18
2.2 Adjusting the Angle of the Control Panel ..................................... 2-20
To adjust the angle of the control panel ...................................... 2-20
2.3 Turning on the Main Power and the Sub Power .......................... 2-22
To turn on the machine ................................................................ 2-22
To scan during warm-up .............................................................. 2-24
To turn off the machine ................................................................ 2-26
Automatically Canceling the Settings (Automatic Panel Reset) ... 2-27
Automatically Canceling the Mode Screen
(Automatic System Reset) ............................................................ 2-27
Automatically Conserving Energy (Low Power Mode) ................. 2-28
Automatically Conserving Energy (Sleep Mode) .......................... 2-29
Manually Conserving Energy ....................................................... 2-30
Limiting Machine Usage According to a Schedule
(Weekly Timer) .............................................................................. 2-31
Controlling the Use of This Machine With User Authentication ... 2-33
Using the Machine With Account Track ....................................... 2-36
2.4 Loading Paper Into the Tray 1 or 2 ................................................ 2-39
To load paper (tray 1 or 2) ............................................................ 2-39
2.5 Loading Paper Into the Tray 3 or 4 ............................................... 2-41
To load paper (tray 3 or 4) ............................................................ 2-41
2.6 Loading Paper Into the Bypass Tray ............................................. 2-44
To load paper (bypass tray) ......................................................... 2-44
2.7 Loading Paper Into the LCT (LU-401/LU-402) .............................. 2-48
To load paper (LCT) ..................................................................... 2-48
2.8 Loading Paper of a Different Size Into Paper Trays .................... 2-51
Changing the Size of Paper That Is Loaded ................................ 2-51
When Thick Paper Is Loaded Into a Paper Tray .......................... 2-53
To set the conveyance lever ........................................................ 2-53
3 Basic Copy Operations
3.1 General Copy Operation .................................................................. 3-2
To make a copy ............................................................................. 3-2
3.2 Operations That Cannot Be Combined .......................................... 3-5
Operations where the setting specified last is given priority ......... 3-5
Operations where the setting specified first is given priority ......... 3-6
3.3 Positioning the Original .................................................................... 3-7
To position the original into the ADF .............................................. 3-7
To position the original on the original glass ................................. 3-9
bizhub 750/600 x-5
Introduction
Scanning the Original in Separate Batches
(“Separate Scan” Setting) .............................................................3-11
Scanning a Multi-Page Original from the Original Glass ..............3-13
3.4 Specifying Original Settings ...........................................................3-15
Copying Original of Mixed Sizes (“Mixed Original” Setting) .........3-15
Positioning Folded (Z-Folded) Original .........................................3-17
Positioning Tabbed Original ..........................................................3-18
Selecting the Original Orientation (Original Direction Settings) ....3-20
To specify an Original Direction setting ........................................3-21
Selecting the Position of the Binding Margin (Margin Settings) ...3-22
To specify a Margin setting ...........................................................3-24
3.5 Selecting a Paper Setting ...............................................................3-26
Automatically Selecting the Paper Size
(“Auto Paper Select” Setting) ........................................................3-26
Manually Selecting the Desired Paper Size ..................................3-28
3.6 Specifying a Zoom Setting .............................................................3-29
Automatically Selecting the Zoom Ratio (“Auto Zoom” Setting) ..3-29
Specifying the Same Zoom Ratio as the Original
(“×1.0” Setting) ..............................................................................3-30
Slightly Reducing the Copy (“Minimal” Setting) ............................3-31
Selecting a Preset Zoom Ratio (Enlarge and Reduce Settings) ...3-32
Typing In the Zoom Ratio
(Zoom with Constant X and Y Ratio Setting) ................................3-33
Typing In Separate X and Y Zoom Ratios
(Independent Zoom Settings) .......................................................3-35
Selecting a Stored Zoom Ratio .....................................................3-37
Storing the Desired Zoom Ratio ...................................................3-38
3.7 Selecting a Simplex/Duplex Setting (1-Side/2-Sides Settings) ...3-40
To select single-sided copies .......................................................3-42
To select double-sided copies .....................................................3-43
3.8 Selecting the Quality of the Original ..............................................3-45
Positioning Original With Small Print or Photos
(Orig. Image Type Settings) ..........................................................3-45
To specify an Orig. Image Type setting ........................................3-46
3.9 Specifying the Density Settings .....................................................3-47
Adjusting the Print Density (Density Settings) ..............................3-48
Adjusting the Background Density
(Adjust Background Settings) .......................................................3-49
3.10 Selecting a Combine Originals Setting ..........................................3-50
Copying Multiple Original Pages Onto a Single Page
(Combine Originals) ......................................................................3-52
x-6 bizhub 750/600
Introduction
3.11 Selecting Finishing Settings .......................................................... 3-53
Separating Copies by Sets (“Sort” Setting) ................................. 3-56
Separating Copies by Pages (“Group” Setting) ........................... 3-57
Feeding Out Copies Face Up (“Face Up” Setting) ....................... 3-58
Stapling Copies (Staple Settings) ................................................ 3-59
To bind copies with staples ......................................................... 3-61
Punching Holes in Copies (Punch Settings) ................................ 3-63
To punch holes in copies ............................................................. 3-64
3.12 Specifying Folding Settings ........................................................... 3-66
To fold copies at the center (“Half Fold”) ..................................... 3-67
To bind copies at the center (“Fold & Staple”) ............................. 3-68
To fold copies fanned (“Z-Fold”) .................................................. 3-69
To fold copies in three (“Tri-Fold”) ............................................... 3-70
3.13 Scanning the Next Original To Be Copied While a Copy Job Is
Being Printed (Next Job Reservation) ........................................... 3-72
To reserve a copy job .................................................................. 3-72
3.14 Stopping Scanning/Printing ........................................................... 3-74
To stop scanning/printing ............................................................ 3-74
3.15 Deleting a Stopped Job .................................................................. 3-75
To delete a stopped job ............................................................... 3-75
4 Additional Copy Operations
4.1 Checking the Copy Settings (Mode Check) ................................... 4-2
To check the settings ..................................................................... 4-2
To change the settings ................................................................... 4-4
4.2 Printing a Proof Copy To Be Checked (Proof Copy) ..................... 4-5
To make test prints ........................................................................ 4-5
4.3 Interrupting a Copy Job (Interrupt Mode) ...................................... 4-8
To interrupt a copy job ................................................................... 4-8
4.4 Registering Copy Programs (Mode Memory) .............................. 4-10
To store/change a copy program ................................................ 4-10
To delete a copy program ............................................................ 4-13
4.5 Copying With Programmed Copy Settings (Mode Memory) ...... 4-14
To recall a stored job ................................................................... 4-14
4.6 Displaying Function Descriptions (Help) ...................................... 4-17
Overview of Help Screens ............................................................ 4-17
To display the Main Help Menu screen ....................................... 4-20
To display the Help screen while specifying a setting ................. 4-22
bizhub 750/600 x-7
4.7 Specifying Control Panel Settings (Accessibility Mode) ..............4-23
Displaying the Accessibility Setting Screen ..................................4-23
To set the “Key Repeat Start/Interval Time” function ...................4-23
To set the “Enlarge Display Timer Setting” function .....................4-26
To set the “Message Display Time” function ................................4-28
To set the “Accept Sound Setting” function .................................4-30
To set the “Touch Panel Volume Adjust” function ........................4-33
To set the “Touch Panel Adj.” function .........................................4-35
5 Troubleshooting
5.1 When the Message “Malfunction detected.” Appears
(Call Technical Representative) .......................................................5-2
Display in Enlarge Display Mode ....................................................5-2
To call the technical representative ................................................5-3
5.2 When the Message “Misfeed detected.” Appears .........................5-5
To clear a paper misfeed ................................................................5-6
5.3 When the Message “Replenish paper.” Appears ...........................5-8
To replenish paper ..........................................................................5-8
5.4 When the Message “... Not enough remaining memory.”
Appears ..............................................................................................5-9
Memory Becomes Full While Scanning ..........................................5-9
Memory Becomes Full While Queuing a Job ................................5-10
5.5 Simple Troubleshooting ..................................................................5-11
Main body .....................................................................................5-11
ADF ...............................................................................................5-13
Finisher .........................................................................................5-14
5.6 Main Messages and Their Remedies .............................................5-15
Introduction
6 Specifications
6.1 Specifications ....................................................................................6-2
bizhub 750/600 ...............................................................................6-2
ADF .................................................................................................6-3
Option Specifications ......................................................................6-5
Large Capacity Tray LU-401 ...........................................................6-5
Large Capacity Tray LU-402 ...........................................................6-5
Finisher FS-504 ...............................................................................6-6
Finisher FS-602 ...............................................................................6-6
Punch Kit PK-505 ...........................................................................6-7
Z-Folding Unit ZU-602 ....................................................................6-8
Cover Sheet Feeder PI-501 ............................................................6-8
Shift Tray SF-601 ............................................................................6-8
Accessories .....................................................................................6-9
x-8 bizhub 750/600
Introduction
7 Copy Paper/Original
7.1 Copy Paper ........................................................................................ 7-2
Possible Paper Sizes ..................................................................... 7-2
Paper Types and Paper Capacities ............................................... 7-3
Special Paper ................................................................................. 7-4
Precautions for Paper .................................................................... 7-6
Paper Storage ................................................................................ 7-6
Automatic Tray Switching Feature ................................................. 7-7
Order for Selecting the Paper Trays .............................................. 7-7
7.2 Specifying the Paper Setting for the Bypass Tray ......................... 7-8
To automatically detect the paper size
(“Auto Paper Select” setting) ......................................................... 7-8
To specify a paper size (Standard Size settings) ......................... 7-10
To specify a non-standard paper size (Custom Size settings) .... 7-12
To store a non-standard paper size
(Custom Size settings Store) ........................................................ 7-14
To select a setting for oversized paper
(Oversized Paper settings) ........................................................... 7-17
To specify a setting for special paper .......................................... 7-20
7.3 Specifying Paper Settings for Paper Trays .................................. 7-22
To display the Paper Tray Setting screen .................................... 7-22
To specify a standard paper size (Standard Size 1 settings) ....... 7-24
To specify a setting for standard special-sized paper
(Standard Size 2 settings) ............................................................ 7-25
To specify a non-standard paper size (Custom Size settings) .... 7-27
To select a setting for oversized paper
(Oversized Paper settings) ........................................................... 7-29
To specify a paper type ............................................................... 7-31
7.4 Originals .......................................................................................... 7-33
Original That Can Be Positioned into the ADF ............................. 7-33
Precautions for Positioning Original into the ADF ........................ 7-35
Original That Can Be Placed on the Original Glass ..................... 7-35
Precautions for Positioning Original on the Original Glass .......... 7-36
8 Application Functions
8.1 Inserting Paper Between Overhead Projector Transparencies
(“OHP Interleave” Function) ............................................................. 8-2
To copy using the “OHP Interleave” function ................................ 8-3
8.2 Inserting Copies of a Different Original at a Specified Location
(“Insert Image” Function) ................................................................. 8-6
To copy using the “Insert Image” function .................................... 8-8
bizhub 750/600 x-9
Introduction
8.3 Adding Cover Pages (“Cover Mode” Function) ............................8-12
To copy using the “Cover Mode” function ...................................8-13
8.4 Inserting Cover Pages (“Insert Sheet” Function) .........................8-16
To copy using the “Insert Sheet” function ....................................8-18
8.5 Specifying Pages To Be Printed on the Front Side
(“Chapters” Function) .....................................................................8-22
To copy using the “Chapters” function ........................................8-24
8.6 Copying With Image Colors Inversed
(“Neg-/Pos. Reverse” Function) .....................................................8-28
To copy using the “Neg-/Pos. Reverse” function .........................8-28
8.7 Producing Separate Copies of Each Page in a Page Spread
(“Book Copy” Function) ..................................................................8-30
To copy using the “Book Copy” function .....................................8-32
8.8 Repeating the Copy Image on a Sheet of Paper
(“Image Repeat” Function) .............................................................8-38
To automatically detect the scanning area
(“Auto Original Size Detect”) .........................................................8-40
To repeat the specified area (“Set Range”) ..................................8-43
To repeat the image the specified number of times (“Repeat”) ....8-47
8.9 Copying an Original on Two Pages
(“Booklet Pagination” Function) .....................................................8-51
To copy using the “Booklet Pagination” function .........................8-52
8.10 Adding Filing Margins to Copies (“Page Margin” Function) ........8-54
To copy using the “Page Margin” function ...................................8-55
To adjust the position of the binding margin
(“Edit Margin” setting) ...................................................................8-57
8.11 Adjusting the Image To Fit the Paper
(Image Adjustment Settings) ..........................................................8-61
To copy using the Image Adjustment settings .............................8-63
8.12 Copying Booklet Original (“Booklet” Function) ............................8-66
To copy using the “Booklet” function ...........................................8-67
8.13 Erasing Specified Areas of Copies (“Erase” Functions) ..............8-69
To erase specified areas of copies (“Erase” function) ..................8-70
To erase the center of copies (“Center Erase” function) ..............8-73
To erase specified areas of copies
(“Non-Image Area Erase” function) ...............................................8-75
8.14 Printing the Date/Time, Page Number or Distribution Number on
Copies (Stamp/Overlay Functions) ................................................8-77
To display the Stamp/Overlay screen ...........................................8-79
Printing the Date/Time (“Date/Time” function) ..............................8-81
To copy using the “Date/Time” function .......................................8-81
x-10 bizhub 750/600
Introduction
Printing the Page Number (“Page #” function) ............................ 8-83
To copy using the “Page #” function ........................................... 8-83
Printing the Distribution Number (“Set Numbering” function) ..... 8-88
To copy using the “Set Numbering” function .............................. 8-88
Printing the built-in stamp (“Built-In Stamp” function) ................. 8-90
To copy using the “Built-in stamp” function ................................ 8-90
Printing the preset text at the center of the copy image
(“Watermark” function) ................................................................. 8-92
To copy using the “Watermark” function ..................................... 8-92
9 Replacing Toner Cartridges and Staples and Emptying
Dust Boxes
9.1 Replacing the Toner Cartridge ........................................................ 9-2
Display in Enlarge Display Mode ................................................... 9-3
To replace the toner cartridge ........................................................ 9-4
9.2 Replacing the Staples ...................................................................... 9-7
Display in Enlarge Display Mode ................................................... 9-7
To replace the staple cartridge for finisher FS-504 ....................... 9-8
To replace the staple cartridge for finisher FS-602 ..................... 9-11
9.3 Emptying the Dust Boxes .............................................................. 9-15
To empty the dust box of the punch kit ....................................... 9-15
To empty the dust box of the Z-folding unit ................................ 9-17
10 Care of the Machine
10.1 Cleaning ........................................................................................... 10-2
Main body .................................................................................... 10-2
Original Glass ............................................................................... 10-3
Left Partition Glass ....................................................................... 10-3
Control Panel ............................................................................... 10-4
ADF platen guide cover ................................................................ 10-4
Paper Take-Up Roller ................................................................... 10-5
10.2 Viewing Counters (Meter Count) ................................................... 10-6
To view the counters .................................................................... 10-6
10.3 When the Message “Preventive maintenance time.” Appears ... 10-7
bizhub 750/600 x-11
11 Managing Jobs (Job List)
11.1 Overview of the Job List Screen ....................................................11-2
Jobs ..............................................................................................11-2
Multi-Job Feature ..........................................................................11-2
Job List Screens ...........................................................................11-2
11.2 Performing Operations on Jobs .....................................................11-6
To delete a job ..............................................................................11-6
To check the job settings ..............................................................11-8
Displayed Information ...................................................................11-9
To check the job details ..............................................................11-10
To display Current Jobs (Held Jobs and Active Jobs lists) ........11-11
To display Job History ................................................................11-12
To print a sample copy of a stored job .......................................11-13
To print a stored job ...................................................................11-15
To increase priority for printing ...................................................11-18
12 Utility
12.1 Overview of Utility Mode .................................................................12-2
List of Registration Information .....................................................12-2
12.2 Selecting a Destination Register ..................................................12-11
One-Touch Registration ..............................................................12-11
User Box .....................................................................................12-11
Displaying the Destination Register Screen ................................12-12
12.3 Specifying User Settings ...............................................................12-14
System Setting ............................................................................12-14
Display Setting ............................................................................12-19
Initial Setting ...............................................................................12-20
Copier Setting .............................................................................12-21
Scanner Setting ..........................................................................12-23
Printer Setting .............................................................................12-23
Displaying the User Setting Screen ............................................12-24
12.4 Specifying Administrator Settings ...............................................12-26
System Setting ............................................................................12-26
Administrator/Machine Setting ...................................................12-32
One-Touch Registration ..............................................................12-32
User Authentication/Account Track ............................................12-33
Network Setting ..........................................................................12-35
Copier Setting .............................................................................12-35
Printer Setting .............................................................................12-36
System Connection ....................................................................12-37
Security Setting ...........................................................................12-37
Displaying the Administrator Setting Screen ..............................12-39
Introduction
x-12 bizhub 750/600
Introduction
12.5 Adjusting the Printer .................................................................... 12-41
Adjusting the Starting Print Position at the Leading Edge
Position ...................................................................................... 12-41
Adjusting the Starting Print Position at the Left Edge ............... 12-43
12.6 Adjusting the Finisher .................................................................. 12-45
Adjusting the Center Stapling Position ...................................... 12-45
Adjusting the Half-Fold Position ................................................ 12-47
Adjusting the Hole-Punching Positions
(Punch Vertical Position) ............................................................ 12-49
Adjusting the Hole-Punching Positions
(Punch Horizontal Position) ........................................................ 12-52
Adjusting the Hole-Punching Positions
(Punch Unit Vert. Position) ......................................................... 12-55
Adjusting the Hole-Punching Positions
(Punch Unit Hor. Position) .......................................................... 12-58
Adjusting the Hole-Punching Positions
(Punch Resist Loop Size) ........................................................... 12-61
Adjusting the Z-Fold Positions ................................................... 12-63
Adjusting the Tri-Fold Positions ................................................. 12-66
Adjusting the Pitch of the Two Staples ...................................... 12-68
Cover Sheet Tray Size ................................................................ 12-70
12.7 Authentication Method ................................................................. 12-71
User authentication and account track ...................................... 12-71
When User Authentication and Account Track Are
Synchronized ............................................................................. 12-72
When User Authentication and Account Track Are Used
Separately .................................................................................. 12-73
To select an authentication method ........................................... 12-74
12.8 User Authentication Setting ........................................................ 12-78
Administrative Setting ................................................................ 12-78
User Name List .......................................................................... 12-78
Default Function Permission ...................................................... 12-78
To specify the Administrative Setting ........................................ 12-78
User Registration ....................................................................... 12-80
User Counter .............................................................................. 12-84
To check the counter ................................................................. 12-84
12.9 Account Track Setting ................................................................. 12-86
Account Track Registration ........................................................ 12-86
Account Track Counter .............................................................. 12-90
To check the counter ................................................................. 12-91
12.10 Password Rules ............................................................................ 12-92
Conditions of the password rules .............................................. 12-92
bizhub 750/600 x-13
13 Appendix
13.1 Entering Text ....................................................................................13-2
To type text ...................................................................................13-4
List of Available Characters ..........................................................13-4
13.2 Function Combination Table ..........................................................13-5
Function Combination Table .........................................................13-5
14 Index
14.1 Index .................................................................................................14-2
Introduction
x-14 bizhub 750/600
Introduction
Available Features
Automatically selecting the paper
The most appropriate paper size can automatically be selected based on the
size of the loaded original and the specified zoom ratio.
For details, refer to “Automatically Selecting the Paper Size (“Auto Paper Select” Setting)” on page 3-26.
Adjusting copies to the size of the paper
The most appropriate zoom ratio can automatically be selected based on the
size of the loaded original and the specified paper size.
For details, refer to “Automatically Selecting the Zoom Ratio (“Auto Zoom”
Setting)” on page 3-29.
Scanning the document in separate batches
A document with a large number of pages can be divided and scanned in
separate batches. Double-sided copies can be produced by using the original glass or the original pages can be alternately loaded onto the original
glass or into the automatic document feeder, and then all pages can be printed together as a single job.
For details, refer to “Scanning a Multi-Page Original from the Original Glass”
on page 3-13 and “Scanning the Original in Separate Batches (“Separate
Scan” Setting)” on page 3-11.
Copying an original containing various page sizes
An original with various page sizes can be scanned and copied together.
For details, refer to “Copying Original of Mixed Sizes (“Mixed Original” Setting)” on page 3-15.
ABC ABC
bizhub 750/600 x-15
Introduction
Specifying separate horizontal and vertical zoom ratios
By specifying separate horizontal and vertical zoom ratios, copies of the original can be resized as desired.
For details, refer to “Typing In Separate X and Y Zoom Ratios (Independent
Zoom Settings)” on page 3-35.
ABC
Adjusting copies according to the image quality of the original
The copies can be adjusted according to the image quality of the original.
For details, refer to “Positioning Original With Small Print or Photos (Orig. Image Type Settings)” on page 3-45 or “Adjusting the Print Density (Density
Settings)” on page 3-48.
Copying multiple Original pages onto a single page
Multiple pages of the original can be printed together on a single page.
For details, refer to “Copying Multiple Original Pages Onto a Single Page
(Combine Originals)” on page 3-52.
ABC
ABC DEF
ABC
ABC DEF
x-16 bizhub 750/600
Introduction
Sorting copies
The sorting method for outputting copies can be selected.
For details, refer to “Separating Copies by Sets (“Sort” Setting)” on
page 3-56, “Separating Copies by Pages (“Group” Setting)” on page 3-57.
ABC
1
ABC
2
1
ABC
3
2
ABC
4
1
1
1
1
ABC
ABC
ABC
ABC
1
1
1
4
3
1
ABC
1
ABC
2
1
ABC
3
2
ABC
4
4
3
ABC
2
ABC
2
3
1
1
ABC
ABC
3
ABC
4
1
ABC
1
4
1
1
Stapling copies
Copies can be stapled together before they are fed out.
For details, refer to “Stapling Copies (Staple Settings)” on page 3-59.
ABC ABC
Punching holes in copies
Holes for filing can be punched in the copies.
For details, refer to “Punching Holes in Copies (Punch Settings)” on
page 3-63.
ABC
bizhub 750/600 x-17
Introduction
DEF
ABC
Center folding/binding
Copies can be folded in half or bound with staples, then folded in half. For
details, refer to “To fold copies at the center (“Half Fold”)” on page 3-67 and
“To bind copies at the center (“Fold & Staple”)” on page 3-68.
Zigzag folding and folding in three
Copies can be folded fanned or in three. For details, refer to “To fold copies
fanned (“Z-Fold”)” on page 3-69 and “To fold copies in three (“Tri-Fold”)” on
page 3-70.
Inserting paper between copies of overhead projector transparencies
After each overhead projector transparency copy is printed, a page can be
added to the stack as an interleaf.
For details, refer to “Inserting Paper Between Overhead Projector Transparencies (“OHP Interleave” Function)” on page 8-2.
DEF
ABC
ABC
DEF
x-18 bizhub 750/600
Introduction
COVER
Inserting copies of a different original at a specified location
An original page scanned from the original glass can be inserted between
original pages scanned with the automatic document feeder, and all copies
can be fed out together.
For details, refer to “Inserting Copies of a Different Original at a Specified Location (“Insert Image” Function)” on page 8-6.
ABC
Adding a cover page/insertion
Cover pages or insertions can be added to copies.Copies can be produced
using different paper (for example, colored paper) for the cover pages and
insertions.
For details, refer to “Adding Cover Pages (“Cover Mode” Function)” on
page 8-12 and “Inserting Cover Pages (“Insert Sheet” Function)” on
page 8-16.
DEF
ABC
Copying with chapter title pages on the front side
Double-sided copies can be made so that the chapter title pages are printed
on the front sides of pages.
For details, refer to “Specifying Pages To Be Printed on the Front Side
(“Chapters” Function)” on page 8-22.
ABC
ABC
DEF
bizhub 750/600 x-19
Introduction
Copying with reversed colors
original can be copied with the light- and dark-colored areas of images in-
An
versed.
For details, refer to “Copying With Image Colors Inversed (“Neg-/Pos. Reverse” Function)” on page 8-28.
ABCABC
Separately copying a page spread
A page spread, such as in an open book or catalog, can be copied onto separate pages.
For details, refer to “Producing Separate Copies of Each Page in a Page
Spread (“Book Copy” Function)” on page 8-30.
ABC DEF
Repeating copy images
An
original image can be repeatedly printed on a single sheet of paper.
For details, refer to “Repeating the Copy Image on a Sheet of Paper (“Image
Repeat” Function)” on page 8-38.
x-20 bizhub 750/600
Introduction
Splitting an original page into two copies
A single original page can be divided in two and each half can be printed on
separate copies. For details, refer to “Copying an Original on Two Pages
(“Booklet Pagination” Function)” on page 8-51.
ABC DEF
Making copies for filing
Copies can be printed with a filing margin so they can easily be stored in filing
binders.
For details, refer to “Adding Filing Margins to Copies (“Page Margin” Function)” on page 8-54.
DEF
ABC
Adjusting the image to fit the paper size
Copies can be produced after specifying the position of the original image
on the paper. For details, refer to “Adjusting the Image To Fit the Paper (Image Adjustment Settings)” on page 8-61.
ABC
ABC DEF
GHIGHI
DEF
ABC
ABC
bizhub 750/600 x-21
Introduction
Copying with a layout for center binding
Copies can be made with the pages arranged in the layout of a magazine.
For details, refer to “Copying Booklet Original (“Booklet” Function)” on
page 8-66.
12
11
2
1
Erasing sections of copies
The transmission information in received faxes and the shadows from
punched holes and from the bindings and edges of books can be erased in
copies.
For details, refer to “Erasing Specified Areas of Copies (“Erase” Functions)”
on page 8-69.
Printing distribution text on copies
Each copy set can be printed with distributions numbers, page numbers, or
the date.
For details, refer to “Printing the Date/Time, Page Number or Distribution
Number on Copies (Stamp/Overlay Functions)” on page 8-77.
11
12 1
ABC DEF
2
ABCABC
0001
GHI
DEF
ABC
Managing jobs
The print status of copy jobs can be checked and the jobs can be managed.
For details, refer to “Managing Jobs (Job List)” on page 11-2.
x-22 bizhub 750/600
DEF
0001
ABC
0001
GHI
0001
0001
0001
ABC
0002
DEF
0002
0002
0002
0002
GHI
0002
Introduction
Programming copy settings
Frequently used copy settings can be programmed and recalled to be used
with other copy jobs.
For details, refer to “Registering Copy Programs (Mode Memory)” on
page 4-10.
Checking the copy settings
Screens showing the current copy settings can be displayed. From these
screens, the copy settings can also be changed.
For details, refer to “Checking the Copy Settings (Mode Check)” on
page 4-2.
Enlarging the size of text in touch panel screens
The text and buttons in the touch panel can be displayed in a larger size that
is easier to read, allowing basic copy operations to be easily performed.
For details, refer to the Enlarge Display Operations of the bizhub750/600
User’s Guide.
Displaying explanations of functions and settings
The name and function of parts and details of functions and settings appears
in the Help screens.
For details, refer to “Displaying Function Descriptions (Help)” on page 4-17.
Interrupting a copy job
The copy job being printed can be interrupted in order for a different copy
job to be printed.
For details, refer to “Interrupting a Copy Job (Interrupt Mode)” on page 4-8.
Printing a sample copy
Before printing a large number of copies, a single proof copy can be printed
so that it can be checked.
For details, refer to “Printing a Proof Copy To Be Checked (Proof Copy)” on
page 4-5.
bizhub 750/600 x-23
Explanation of Manual Conventions
Titles indicate the contents of the section.
Touch panel screens are shown to
check the actual display.
Introduction
Text highlighted in this manner indicates precautions to ensure safe use of this machine.
"Warning" indicates instructions that, when not observed, may result in fatal or critical injuries.
"Caution" indicates instructions that, when not observed, may result in serious injuries or
property damage.
(The page shown above is an example only.)
x-24 bizhub 750/600
Introduction
Descriptions and Symbols for Original and Paper
The use of words and symbols in this manual are explained below.
“Width” and “Length”
Whenever paper dimensions
are mentioned in this manual,
the first value always refers to
the width of the paper (shown
as “Y” in the illustration) and
the second to the length
(shown as “X”).
Paper Orientation
Lengthwise (w)
If the width (Y) of the paper is
shorter than the length (X), the
paper has a vertical or portrait
orientation, indicated by w.
bizhub 750/600 x-25
Crosswise (v)
If the width (Y) of the paper is
longer than the length (X), the
paper has a horizontal or landscape orientation, indicated
by v.
Introduction
x-26 bizhub 750/600
Introduction
User’s Guides
The following User’s Guides have been prepared for this machine.
User’s Guide [Copy Operations] <this manual>
This manual contains details on basic operations and the operating procedures for the various copy functions.
- Refer to this User’s Guide for details on operating procedures for copy
functions, including precautions on installation/use, turning the machine
on/off, loading paper, and troubleshooting operations such as clearing
paper misfeeds.
User’s Guide [Network Scanner Operations]
This manual contains details on specifying network settings for standard
equipment and on operations for scanning functions.
- Refer to this User’s Guide for details on operating procedures for network
functions and for using Scan to E-Mail, Scan to FTP and Scan to PC
(SMB).
User’s Guide [Box Operations]
This manual contains details on operating procedures for using the boxes.
- Refer to this User’s Guide for details on operating procedures for using
the boxes on the hard disk.
User’s Guide [Enlarge Display Operations]
This manual contains details on operating procedures for using copy functions in Enlarge Display mode.
- Refer to this User’s Guide for details on operating procedures in Enlarge
Display mode.
bizhub 750/600 x-27
Legal Restrictions on Copying
Certain types of original must never be copied with the purpose or intent to
pass copies of such documents off as the originals.
The following is not a complete list, but is meant to be used as a guide to
responsible copying.
<Financial Instruments>
- Personal checks
- Traveler’s checks
- Money orders
- Certificates of deposit
- Bonds or other certificates of indebtedness
- Stock certificates
<Legal Documents>
- Food stamps
- Postage stamps (canceled or uncanceled)
- Checks or drafts drawn by government agencies
- Internal revenue stamps (canceled or uncanceled)
- Passports
- Immigration papers
- Motor vehicle licenses and titles
- House and property titles and deeds
<General>
- Identification cards, badges, or insignias
- Copyrighted works without permission of the copyright owner
In addition, it is prohibited under any circumstances
eign currencies, or works of art without permission of the copyright owner.
When in doubt about the nature of a document, consult with legal counsel.
Introduction
to copy domestic or for-
x-28 bizhub 750/600
1
Installation and
Operation Precautions
Installation and Operation Precautions Chapter 1
Loading...