Konica Minolta 7040, KN-302 User Manual
KN-302
Network Interface Card
User's Guide
for the Network Administrator
Konica KN-302
© 1999 by Konica Business Technologies, Inc.
Manual V ersion
OP-KN302-01
Correspondence
KONICA BUSINESS TECHNOLOGIES, INC.
Marketing/DSSG
500 Day Hill Road
Windsor, CT 06095
Acknowledgments
All brands and product names are trademarks or registered trademarks of their respective companies.
Web Site Address on the Internet
http://www.konicabt.com
Disclaimer Notice
Konica Business Technologies, Inc. has made every effort to ensure that information in this manual is complete and
accurate. However, constant efforts are also being made to improve and update the product. Therefore, Konica
Business Technologies, Inc. shall not be liable for errors in this manual or for any consequential damages resulting
from the use of this manual. Information contained herein is subject to change without notice.
Konica KN-302
Welcome to the User's Guide for the KN-302 Network Interface Card.
The User's Guide provides instructions on installing network software Utilities on network systems such as Novell
NetWare; TCP/IP for the UNIX operating system; Ethertalk; AppleTalk for Macintosh system; or a network system that
combines any of these protocols.
Included are configuration procedures and instructions for setting up the KN-302 as a print server on a network.
Konica is committed to serving you in the best way possible. We welcome your comments on this manual. Please use
our correspondence address displayed on the inside front cover.
Should you need assistance on technical matters not covered in this manual, please phone Konica's Technical Support
Center at 1(800)825-5664.
NON-EXCLUSIVE LICENSE AGREEMENT
READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY.
BY USING THE PRODUCTS DESCRIBED IN THIS USER MANUAL OR DOWNLOADING SOFTWARE OR PRINTER DRIVERS TO YOUR COMPUTER YOU AGREE TO BE BOUND BY THE
TERMS OF THIS LICENSE.
The computer programs embedded in the equipment, the accompanying printer drivers (the “Software”) and user documentation are
copyrighted and licensed (not sold) to you by Konica Business Technologies, Inc. (“KONICA or LICENSOR”), 500 Day Hill Road,
Windsor, Connecticut. This license agreement represents the entire agreement concerning the Software between you and KONICA and
it supersedes any prior proposal, representation, or understanding between the parties. KONICA reserves any rights not expressly
granted to you.
1. LICENSE GRANT. You do not receive title to the Software or User Documentation. Licensor grants to you, and you accept, a
nonexclusive license to use the Software embedded in the Equipment in machine-readable, object code form only (referred to as the
“Computer Program”), the accompanying User Documentation, and Printer Drivers furnished to you, (collectively the “Licensed Articles”) only as authorized in this License Agreement. The Computer Program may be used only on the Equipment in which it is
embedded and may not be shared with or transferred to any other equipment. The Printer Drivers shall be used only with printer products
designed to work with the equipment containing the embedded Computer Program. You may make a single archive copy of the Printer
Drivers, provided that it includes all copyright notices, markings and proprietary legends on the original, including the markings of any
other company contained therein. This archive copy may not be in use at any time and must remain in your possession and control. You
may not copy the drivers to a bulletin board or other similar system.
2. RESTRICTIONS. YOU MAY NOT ASSIGN, SUBLICENSE, MODIFY , ADAPT , TRANSFER, PLEDGE, LEASE, RENT OR SHARE
YOUR RIGHTS UNDER THIS LICENSE AGREEMENT. YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE,
OR OTHERWISE TRANSLATE THE SOFTWARE OR PRINTER DRIVERS, OR USE ANY OTHER METHOD TO DISCOVER THE PRINTER DRIVER’S OR SOFTW ARE’S SOURCE CODE. YOU MAY NOT CREATE DERIVATIVE WORKS
BASED UPON THE SOFTWARE OR ANY PART THEREOF. YOU MAY NOT COPY THE LICENSED ARTICLES EXCEPT AS SPECIFICALLY PROVIDED IN THIS LICENSE AGREEMENT.
3. LICENSOR’S RIGHTS. You acknowledge and agree that the Licensed Articles are proprietary products of Licensor or its suppliers and
are protected under U.S. copyright law. You further acknowledge and agree that all right, title and interest in and to the Licensed
Articles, including associated intellectual property rights, are and shall remain with Licensor or its supplier. Licensor’s suppliers may
protect their rights in the Licensed Articles in the event of a violation of this License Agreement. This License Agreement does not
convey to you an interest in or to the Licensed Articles, but only a limited right of use revocable in accordance with the terms of this
License Agreement.
4. LICENSE FEES. The license fees of $250.00 (included in the purchase price of the Equipment) paid by you are paid in consideration
of the licenses granted under this License Agreement.
5. TERMINATION. This License Agreement is effective upon the purchase and acceptance of the Equipment by you or the downloading
of any Software or Printer Driver from KONICA’s Website or other authorized electronic medium and shall continue until terminated.
This License Agreement will terminate upon your sale, transfer or disposal of the Equipment having the Software embedded therein.
Licensor may terminate this License Agreement upon the breach by you of any term hereof. Upon such termination by Licensor, you
agree to delete the Software and Printer Drivers from the hard drive of the Equipment and destroy all copies of the Software and Printer
Drivers and User Documentation.
6. LIMITED WARRANTY. Licensor warrants, for your benefit alone, for a period of 90 days from the date of commencement of this
License Agreement (referred to as the “Warranty Period”) that the Software and Printer Drivers shall operate substantially in accordance
with the functional specifications in the User Documentation. KONICA specifically does not warrant that the Software or Printer
Drivers will operate uninterrupted or error-free. If during the Warranty Period, a defect in the Software or Printer Drivers appears, you
may contact the Licensor for either a replacement or, if so elected by Licensor, refund of amounts paid by you under this License
Agreement. You agree that the foregoing constitutes your sole and exclusive remedy for breach by Licensor of any warranties made
under this Agreement. EXCEPT FOR THE WARRANTIES SET FORTH ABOVE, THE LICENSED ARTICLES, AND THE SOFTWARE CONTAINED THEREIN, ARE LICENSED “AS IS,” AND LICENSOR DISCLAIMS ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A P A R TICULAR PURPOSE.
(continued)
NON-EXCLUSIVE LICENSE AGREEMENT (continued)
7. LIMITATION OF LIABILITY. Licensor’ s cumulative liability to you or any other party for any loss or damages resulting from any claims,
demands, or actions arising out of or relating to this Agreement shall not exceed $250.00. In no event shall Licensor be liable for any
indirect, incidental, consequential, special, or exemplary damages or lost profits, even if Licensor has been advised of the possibility of
such damages. SOME STATES DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
8. GOVERNING LAW. This License Agreement shall be construed and governed in accordance with the laws of the State of Connecticut.
Should any term of this License Agreement be declared void or unenforceable by any court of competent jurisdiction, such declaration
shall have no effect on the remaining terms hereof.
9. COSTS OF LITIGATION. If any action is brought by either party to this License Agreement against the other party regarding the subject
matter hereof, the prevailing party shall be entitled to recover, in addition to any other relief granted, reasonable attorney fees and
expenses of litigation.
10. NO WAIVER. The failure of any party to enforce any rights granted hereunder or to take action against the another party in the event
of any breach hereunder shall not be deemed a waiver by that party as to subsequent enforcement of rights or subsequent actions in the
event of future breaches.
11. U.S. GOVERNMENT RESTRICTED RIGHTS. The Licensed Articles are provided with restricted rights. Use, duplication, or disclosure by
the government is subject to restrictions set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.277-7013, and paragraph (c)(1) and (2) of the Commercial Computer Software - Restricted Rights clause at FAR
52.277-19. The manufacturer is: Konica Business Technologies, Inc., 500 Day Hill Road, Windsor, Connecticut 06095.
Konica KN-302
FCC Regulations
The Konica KN-302 generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instruction manual, interference with radio communications may result.
This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to
Subpart J, Part 15, of FCC rules, which are designed to provide reasonable protection against interference from such
equipment when it is operating in a commercial environment.
Users operating this equipment in a residential area are likely to cause interference, in which case they may be required
to correct the interference at their own expense.
EN 55 022 Declaration of Conformance
This is to certify that the Konica KN-302 is shielded against the generation of radio interference in accordance with the
application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 022 Class
B (CISPR 22).
Compliance is dependent upon the use of shielded data cables.
Canadian Department of Communications Regulations
Le présent appareil n'émet pas de bruits radioélectriques dépassant les limites applicables aux de Class A prescrites
dans le règlement sur la brouillage radioélectrique édicté par Le Ministère des Communications du Canada.
This equipment does not exceed the Class A limits for radio noise emissions as set out in the radio interference
regulations of the Canadian Department of Communications.
Contents
Section 1: Introduction
Features Of KN-302 ........................................................................................................................... 1-2
Benefits With Each Protocol ...............................................................................................................1-3
Configuration .......................................................................................................................................1-3
About Installation ................................................................................................................................1-4
Troubleshooting Software For Workstations ....................................................................................... 1-4
What's In Your Package .......................................................................................................................1-4
Installation Requirements ....................................................................................................................1-5
Basic Specifications ............................................................................................................................ 1-6
Section 2: Installation
Network Protocols .............................................................................................................................. 2-2
About The KN-302 Board .................................................................................................................. 2-3
Connectors .......................................................................................................................................... 2-3
Hardware Installation .......................................................................................................................... 2-4
Configuring the Network Protocol ..................................................................................................... 2-5
About Passwords ................................................................................................................................ 2-5
Installing Konica Network Management Utility ................................................................................. 2-6
Section 3: NetWare Configuration
NetWare Utilities Overview ................................................................................................................ 3-2
How To Access The HTTP Server With An IP Browser .................................................................... 3-5
Using Konica Network Management Utility ...................................................................................... 3-6
Overview .............................................................................................................................. 3-6
Using MAP (Management Access Program) ....................................................................... 3-6
MAP Setup Program ............................................................................................................ 3-6
MAP Program ...................................................................................................................... 3-8
Using The MAP Utility ........................................................................................................ 3-9
Configure KN-302 For Use With Novell NetWare ............................................................................ 3-21
Overview .............................................................................................................................. 3-21
Configure Using NetWare 2.15 and 3.1x ............................................................................................ 3-22
Setting Up Print Queues ...................................................................................................... 3-22
Using PCONSOLE ............................................................................................................... 3-23
Configure Using NetW ar e 4.x NetWare Directory Services ................................................................ 3-33
Overview ...............................................................................................................................3-33
Using The Konica Network Management Utility ................................................................. 3-35
NetWare Configuration Menu .............................................................................................. 3-37
Using the NWADMIN Utility ............................................................................................... 3-40
Configure Using NetWare 4.x Bindery Emulation .............................................................................. 3-47
Overview ...............................................................................................................................3-47
Using PCONSOLE ............................................................................................................... 3-48
Primary File Server ............................................................................................................................. 3-54
When To Define A Primary File Server ............................................................................... 3-54
How To Define A Primary File Server ................................................................................. 3-55
Contents
Section 4: AppleTalk Configuration and Administration
Overview ............................................................................................................................................ 4-2
Enabling The AppleTalk Protocol ...................................................................................................... 4-2
Configuration For AppleTalk ............................................................................................................. 4-2
Choosing The Printer .......................................................................................................................... 4-3
How To Access The AppleTalk Administration Program .................................................................. 4-4
Configuring The KN-302 Print Server ............................................................................................... 4-5
Error Log .............................................................................................................................. 4-6
Printer Setup ....................................................................................................................................... 4-7
Protocol Setup For TCP/IP Users ........................................................................................ 4-8
How To Access The HTTP Server With An IP Browser ................................................................... 4-9
Control Options .................................................................................................................................. 4-9
Section 5: Unix Printing Through TCP/IP
Overview ............................................................................................................................................. 5-2
Installation in a Windows Environment ................................................................................5-2
Windows for Workgroups ................................................................................................................... 5-3
Installing TCP/IP .................................................................................................................. 5-4
Loading The lpr Spooler .......................................................................................................5-4
Setting Up The Konica Print Server ..................................................................................... 5-4
Assigning IP Address With BOOTP Lite ............................................................................. 5-5
Assigning IP Address With ARP .......................................................................................... 5-6
Creating An lpr Queue On The Workstation ........................................................................ 5-7
Microsoft Windows 95 ....................................................................................................................... 5-8
Loading The lpr Spooler ...................................................................................................... 5-8
Setting Up The Konica Print Server ..................................................................................... 5-8
Assigning IP Address With ntBOOTP ................................................................................. 5-9
Assigning IP Address With ARP ......................................................................................... 5-10
Setting Up lpr on the Workstation ........................................................................................ 5-10
Windows NT Instructions ................................................................................................................... 5-11
Setting Up The Konica Print Server ..................................................................................... 5-11
Assigning IP Address With ntBOOTP ................................................................................. 5-12
Assigning IP Address With ARP ......................................................................................... 5-13
Setting Up lpr On The Workstation ..................................................................................... 5-14
Dynamic Host Configuration Protocol ............................................................................................... 5-15
FTP UNIX Printing ...............................................................................................................5-15
FTP Client .............................................................................................................................5-16
Printing Overview ............................................................................................................................... 5-17
Configuring the IP Address On the KN-302 Print Server .................................................................. 5-19
lpd UNIX Printing .............................................................................................................................. 5-25
Installing TCP/IP If Not Running lpd ................................................................................................ 5-34
Contents
Section 6: Troubleshooting
Diagnosing Problems ......................................................................................................................... 6-2
LED Conditions (Green & Amber Indicator Lights) ......................................................................... 6-3
Status Page ......................................................................................................................................... 6-4
Error Page ........................................................................................................................................... 6-6
How To Determine The Cause Of A Problem .................................................................................... 6-7
Printer Basic Checklist ........................................................................................................................6-8
Network Connections ..........................................................................................................................6-8
KN-301 Troubleshooting .................................................................................................................... 6-9
Novell Protocol ................................................................................................................................... 6-10
Novell File Server Checklist ............................................................................................................... 6-11
If KN-302 Loses Its Novell File Server Connection ...........................................................................6-11
KN-302 Workstation Checklist ........................................................................................................... 6-11
Print Server/File Server/Printer Connection Check List ..................................................................... 6-11
KN-302 Configuration Checklist .........................................................................................................6-12
Workstation To KN-302 Connection Checklist .................................................................................. 6-13
AppleTalk Protocol .............................................................................................................................6-14
Macintosh>AppleTalk Connectors>Ethertalk Driver ...........................................................6-14
Macintosh>KN-302>KN-302 .............................................................................................. 6-14
Printer Checklist ................................................................................................................... 6-14
Multiple Zones ..................................................................................................................... 6-14
UNIX (TCP/IP) .................................................................................................................................. 6-15
Appendix
APPENDIX A:
Web Utilities - HTTP Server .............................................................................................................. A-2
Main Page ........................................................................................................................................... A-3
Printer Status ...................................................................................................................................... A-4
Advanced Features .............................................................................................................................. A-7
Network Setup .................................................................................................................................... A-8
Printer Setup ....................................................................................................................................... A-9
Language Select ................................................................................................................................. A-10
APPENDIX B:
Cable Specifications ............................................................................................................................B-2
Assigning Multiple File Servers ......................................................................................................... B-3
Jumper Settings ................................................................................................................................... B-5
Windows 95 PeerToPeer Printing ...................................................................................................... B-8
Index
Section 1: KN-302 Introduction
KN-302 Introduction
Features of KN-302
q
Network operating systems (NOS) & Protocol support for Novell NetWare versions 2.15, 3.10,
4.0 and above (Bindery and Network Directory Services)
AppleTalk
TCP/IP-UNIX for SUN (Solaris 1.x, 2.x), BSD System V Rel. 4, DEC ULTRIX 4.3 RISC,
OSF1/ALPHA, HP/UX, SCO UNIX and Windows NT systems
q Flash read-only memory (ROM) for easily upgrading the KN-302 with new protocols and future
product enhancements
q Ethernet interface connection - 10BaseT/100BaseT
q Unshielded Twisted Pair (UTP) and Shielded Twisted Pair (STP).
q Windows 95 PeerToPeer Printing allows Windows 95 workstations to print to KN-302 printers.
Refer to Appendix, Windows 95 PeerToPeer Printing, for details.
q The KN-302 is both flexible and easy to install.
Flexibility of the KN-302 is provided with automatic network switching between network proto
cols. Print jobs can be sent from each NOS that is KN-302 configured.
q The KN-302 has an integral HTTP Server to allow you to monitor and manage the KN-302 and its
associated printer from a standard IP Web Browser program.
q IP and IPX SNMP support MIB-2. SNMP supports standard MIB.
The KN-302 supports multiple active protocols. You can activate the protocols and troubleshoot
printing problems using the Konica Network Management Utility or Apple Administration
Program utilities.
Installation is easy because each network protocol requires a simple network or Konica utility in
order to configure the KN-302 printers for the NOS.
1-2 KN-302 Introduction
KN-302 Introduction
Benefits With Each Protocol
q
High performance - Send data as fast as your printer can receive it.
q Easy installation
q Full Print Server Support - Supports all print server features defined for Novell NetWare and
TCP/IP-UNIX.
q Put printers anywhere. Directly connect a printer anywhere on the network.
The KN-302 connects one printer.
Configuration
q
For Novell NetWare
Use NetWare’s PCONSOLE utility for NetWare versions 2.15,3.10 and 4.x (Bindery Services);
Konica Network Management Utility or NWADMIN for NetWare 4.x (Directory Services).
q For TCP/IP
Use lpd to print directly from KN-302 without using KONICAsoftware on your host.
If you require host-side printing with broader filtering and banner options, then use KONICA’s
install script.
q For AppleTalk
The KN-302 is pre-configured. If you have different requirements or wish to assign a different
name to the printer, you can use Konica’s AppleTalk Administration program to configure the
KN-302.
KN-302 Introduction
KN-302 Introduction 1-3
About Installation
q
For detailed hardware instructions, see Section 2.
For detailed configuration instructions, see Sections 3 and 4.
Troubleshooting Software for Workstations
q
Novell NetWare: The KN-302 Network Management Utility for Windows lets you troubleshoot
problems by sending test prints or viewing status reports or error logs on the KN-302 print server;
check or modify any configuration option not directly tied to the print server; and change the print
server name and the password it uses to login.
q TCP/IP: KONICA’s software provides error messages and a status page to alert you to incorrectly
entered data.
q AppleTalk: AppleTalk Administration Program provides functions that let you reset the KN-302,
view the KN-302 configuration or an error log, and change the printer setup.
KN-302 Network Management Utility for Macintosh lets you troubleshoot problems
What’s In Your Package
q
KN-302 Network Interface Card (board)
q Ethernet 10BaseT/100BaseT connector and Ribbon Cable
q One CD-ROM containing the Konica Network Management Utility for Windows program;
the Apple Administration program; the TCP/IP installation script; and the User's Guide (this
manual) in electronic PDF format.
KN-302 Introduction
Installation Requirements
1-4 KN-302 Introduction
Version of Protocol or NOS
q
Novell NetWare Version 2.15, 3.1x, or 4.x
q UNIX/Windows/LAN Server systems supporting lpr over TCP/IP.
q Macintosh System 7.x
q DEC ULTRIX 4.3 or 4.4, DEC OSF/1 2.0 or 3.0, Solaris 1.1.3 or 2.3, (SUNOS 4.1.3 or 5.3),
System V Release 4, HP-UX 9.01, IBM AIX 3.2.5, or SCO UNIX 2 for KONICA TCP/IP
Software
q
Novell NetWare printing requires NetWare Capture, NPRINT or PCONSOLE (later than 1.0)
utilities.
q The KN-302 Network Management Utility for Windows utilityrequires Windows 3.1 or later;
Windows for Workgroups 3.11; Windows 95; or Windows NT 3.5 or later.
q The Apple Administration program utility.
q TCP/IP setup and maintenance requires the Konica Network Management Utility.
Hardware
q
Support for 10 & 100 megabit Ethernet networks: 10BaseT/100BaseT cables and hardware.
q CD-ROM drive on the workstation to accept Windows, Macintosh or UNIX utilities.
KN-302 Introduction 1-5
KN-302 Introduction
Basic Specifications
Ethernet Network Interface Controller/Internal Print Server
(NIC/IEEE 1284)
Firmware
Novell, TCP/IP, Apple, HTTP/HTML
Protocols
Novell: NetWare 2.15, 3.x, 4.x (NDS and Bindery based); (IPX/SPX supports Windows
compatible browser utility) TCP/IP: ARP, RARP, BootP, ICMP, SNMP Ethertalk: Transparent
implementation Ver.1
Administration & Management
HTTP server providing access to HTML pages over IP & IPX Konica Network Management
Utility for Windows via the MAP (Management Access Program) Browser
Konica Network Management Utility for Macintosh BootP Lite for Windows and NT
Printer Interface
IEEE 1284 via 26 pin Connector
Instruction Store Download:
Entire program can be updated from Windows program operating through Novell network.
Compatible w/FTP transmission of properly formatted core image operating through TCP/IP
network supporting FTP.
Hardware
10BaseT and 100BaseT
4 MB of RAM
1 MB Flash Memory
Support Software
Management Access Program For Windows (MAP)
Konica Network Management Utility for Windows
(NetWare specific)
BootP (Lite) and NTBootP (for Windows & NT)
Unix Host Based Software
1-6 KN-302 Introduction
Section 2: Installation
Installation
The KN-302 Ethernet Network Interface Card is a 4"x7" board that inserts into a designated slot of your
Konica print controller device.
Network Protocols
q Novell NetWare 2.15, 3.10, and later, or 4.x (Bindery and Network Directory Services - NDS).
q TCP/IP-UNIX networks with lpd capabilities or systems compatible with SUN (Solaris 1.x, 2.x),
BSD System V Release 4, OSF1/Alpha, DEC ULTRIX 4.3 RISC, HP/UX, and SCO UNIX.
Status Light Indicators
q Status light indicators display as green and amber LEDs on the print controller to enable you to
monitor the power-on status and to diagnose problems.
q You can easily troubleshoot the conditions indicated by the lights.
See Section 6, Troubleshooting.
2-2 Installation
Installation
About the KN-302 Board
The two labels shown below are attached to the KN-302 board to identify the model name, manufacture
date code, serial number MAC address number and initial firmware version.
PN:6097000
FO:024205
REV:A/2-PROTO
P/N: ROM: Code:
P C U A 9 5 0 - 7 7 2 0. 0 0 0 1 7
S/N: LAN Address:
9 9 0 4 6 1 0 0 - 4 0 - A F - 7 8 - E 7 - E 8
Made in the USA
Connectors
The Ethernet connectors are illustrated below.
q Ethernet 10BaseT/100BaseT uses a RJ45 cable to connect the
KN-302 to the network.
10BaseT/100BaseT
Installation 2-3
Installation
Hardware Installation
DO NOT apply power to the KN-302 until all hardware installation and software configuration steps are
completed. Use the following steps to connect the Konica printer controller to the KN-302 print server.
Connecting the Ethernet Network to the KN-302
Connect your Ethernet network by using the 10BaseT or 100BaseT Ethernet interface.
Using the 10BaseT/100BaseT Ethernet Interface
This network connection uses a 4-wire RJ cable to plug into the RJ45 network connector located on the
back panel of the print controller. Once you make the connection, you are ready to configure the network
protocol (see instructions on the next page).
2-4 Installation
Installation
Configuring the Network Protocol
After installation is completed, configure and activate your network protocol to work with the KN-302.
• For NetWare configuration, refer to Section 3, NetWare Configuration, which shows you how to
use the Konica Printer Management System with MAP (Management Access Program).
(See next page for Utility Installation instructions.)
• For AppleTalk configuration, refer to Section 4, which shows you how to use the AppleTalk
Configuration and Administration Program.
• For TCP/IP configuration information, refer to Section 5, Unix Printing Through TCP/IP.
About Passwords
The default password is sysadm. It is case-sensitive and must be entered in lowercase.
Installation 2-5
Installation
Konica Network Management Utility
Installation Procedure
This Windows based utility can be installed on any workstation hard drive or network drive. It is recommended that you install the utility program onto an area of the file server restricted to users with Supervisor/
Administrator rights; however this is not a requirement.
When you install the Konica Network Management Utility CD-ROM, the MAP (Management Access
Program) browser installs automatically.
1. Start Windows on your PC or workstation.
2. Insert the Konica Network Management Utility CD in the CD drive.
3. In the Windows Program Manager, select File.
The CD should run automatically while installing ACROBAT READER or while accessing the table of
contents for ACROBAT READER.
4. Select RUN from the menu.
Should the CD not run automatically, execute the file OSICOM16.EXE for the Windows 3.11 system;
or execute the file OSICOM32.EXE for the Windows 95/NT/98 system.
5. Read the information screen and click on Continue.
6. Identify a path for the program.
The path default is C:\MAP
You can change the path or use the default. The installation begins.
7. When installation is completed, remove the CD from the CD drive.
To use the Konica Network Management Utility, see information starting on p. 3-6.
2-6 Installation
Section 3: NetWare Configuration
NetW are Configuration
NetW are Utilities Overview
This section provides information on the various NetWare utility programs that are available to you, with
emphasis on the Novell PCONSOLE utility that is used to perform all KN-302 print server functions.
As an alternative to using PCONSOLE, the procedure using the NW ADMIN utility is provided for configuring NetW are 4.0x (NDS).
PCONSOLE is an integral part of the Konica Network Management Utility. Separate procedures are provided
to show how to configure the KN-302 for the NetWare version you are using.
Before users of the Novell NetW are Network Operating System can print, the KN-302 print server must be
configured according to the instructions included in this section.
Highlights of this section are outlined below.
q How to Access the HTTP Server with an IP browser other than the MAP Utility.
q Konica Management Access Program (MAP) is a Windows based browser utility. The MAP utility
allows you to access the KN-302 and can be used to activate network protocols, configure the print server
and printer port, reset KN-302 from a remote location, and troubleshoot problems. Help screen information is
included to show you how to use the MAP Utility.
q Configure Using NetWare 2.15 and 3.1x describes how to use PCONSOLE to configure and set up KN-
302 printers for printing and to set up the Notify option.
q Configure Using NetWare 4.0x Directory Services (NDS) describes how to use the Konica Network
Management Utility as well as the NW ADMIN utility to configure and set up the KN-302 print Server for
use with version 4.0x Directory Services.
q Configure Using NetWare 4.0x Bindery Emulation describes how to use PCONSOLE to configure and
set up the KN-302 Print Server for use with Version 4.0x Bindery Services.
q Primary File Server explains how to define a Primary File Server and gives you guidelines beforehand
about the effect it has on your network system.
3-2 NetWare Configuration
NetW are Configuration
NetW are Utilities Overview
The following is a list of Novell NetW are utilities.
PCONSOLE
• Use PCONSOLE to set up the KN-302 print server and set the print queues. This utility helps you
control network printing and allows you to view information about network printing.
PRINTDEF
• Use to set up a database of printer definitions. Define device drivers for network printers, plotters,
and other devices. The information defined with the utility is then used by CAPTURE, NPRINT,
PCONSOLE, and PRINTCON.
PRINTCON
• Use to define the preferred print options and set the options up as standard configurations.
PRINTCON serves as a database for printing with CAPTURE, NPRINT , and PCONSOLE.
• The tasks include edit print job configurations, select default print job configurations, and copy
print job configurations from one user to another.
CAPTURE
• Use to print screen displays, save data to a network file, and print to a network printer from a nonnetwork software application.
NPRINT
• Use to print files from outside an application to a network printer. The files must be DOS text files,
or files that are formatted by the application for a specific printer type (for example, HP Laser).
NetWare Configuration 3-3
NetW are Configuration
NetW are Utilities Overview
Basic Steps for Making Changes T o KN-302
CHANGE REQUIRED ACTION STEP REQUIRED
To move the Konica printing
system to another location
on the same network . . .
Relocate the printing system to the new
location and make hardware connections
explained in Section 2. Y ou do not need
to configure with PCONSOLE.
To move the Konica printing
system from its current
network to a new network . . .
To attach new file servers to
KN-302 unit . . .
T o r emove a file server
attached to the KN-302. . .
To add new queues to the
KN-302 unit . . .
To remove queues from the
KN-302 unit . . .
T o change the KN-302 print
server name . . .
Perform hardware installation and
software configuration procedures in
Sections 2, 3, 4, 5, and 6.
Use the PCONSOLE utility.
Use the PCONSOLE utility.
Use the PCONSOLE utility . See Print
Queue Functions in this Section.
Use the PCONSOLE utility . See Print
Queue Functions in this Section.
Use the Konica MAP utility that is on
your Konica Network Management
Utility CD-ROM.
3-4 NetWare Configuration
NetW are Configuration
How T o Access The HTTP Server W ith An IP Browser
Use the following procedure to access the HTTP (HyperText T ransfer Protocol) with your favorite IP
Browser, such as Netscape. This access allows you to perform all print server functions.
Option: If you have the MAP (Konica Management Access Program) Utility, use instructions on p. 3-7.
MAP gives you access to the Konica Network Management Utility, which allows you to perform all print
server functions.
If you do not have the MAP Utility, perform the following steps:
1. Assign an IP address to the KN-302.
See instructions for Assigning IP Address, starting on p. 5-5.
2. Start the IP Browser you normally use.
3. When the browser is up and running, type http:// followed by the IP address of the unit in the
Location field at the top of the browser screen, or by going to File at the menu bar and choosing
Open Location.
Example: For a unit with an IP address of 199.9.200.200, type:
http://199.9.200.200
At this point, the IP Browser works the same as the Konica MAP Utility
(see Network Setup screen on p. 3-8).
NetWare Configuration 3-5
NetW are Configuration
Using Konica Network Management Utility
Overview
The Konica Network Management Utility is a Windows based HyperT ext Transfer Protocol (HTTP) utility
that enables you to configure network protocols for the KN-302 print server; remotely reset the KN-302 print
server to clear an error or to return the print server to factory settings; troubleshoot problems; enable/
disable the status sheet printout; and access context-sensitive Help.
While the Konica Network Management Utility can be accessed with any browser, such as Netscape, you
can also use the MAP (Konica Management Access Program) Utility to access and configure the KN-302.
The MAP Utility automatically installs when you install the Konica Network Management Utility CD-ROM.
If you have not already done so, install the Konica Network Management Utility program using the installation procedure on p. 2-6.
NOTE: The Konica Network Management Utility CANNOT be installed from DOS.
Using MAP (Management Access Program)
The MAP utility consists of the MAP Setup program and the MAP program. (See sample screens on next
page.)
MAP Setup Program
The MAP Setup program allows you to configure the MAP program to search for IP or IPX based printers.
You may also configure the maximum number of hops for the IP searches. The hop count number determines
how many sub-networks the program will search to find the print server units. An entry of zero [0] on the
screen searches only the current subnet. An entry of [2] searches a wire that is directly connected to the
workstation and all networks accessible through two routers. An entry of 15 or higher automatically
searches every connected network; but such a high number is not recommended due to the amount of traffic
it would generate.
MAP Program
The MAP program lets you utilize the default browser for viewing and changing the Print Server configuration settings. To do so, click on any active KN-302 Print Server unit (see next page).
3-6 NetWare Configuration
NetW are Configuration
Using Konica Network Management Utility
Using MAP (Management Access Program)
MAP Setup Screen
MAP Program Screen
SN-49667 Konica KN-201 Running Novell NetWare (NDS), AppleTalk and TCP/IP
SN-992380 Konica KN-302 Running Novell NetWare (NDS), AppleTalk and TCP/IP
SN-992384 Konica KN-302 Running Novell NetWare (NDS), AppleTalk and TCP/IP
KN3 992380 Konica Ethernet Option Supporting Novell (NDS), TCP/IP and AppleTalk
KN3 992384 Konica Ethernet Option Supporting Novell (NDS), TCP/IP and AppleTalk
After clicking on any one of the active KN-302 Print Server units listed in the MAP Program, the Network
Setup screen displays (see next page) to allow you to select any function related to the printer system. (See
APPENDIX A for a full description of the resident HTTP Server).
NOTE: Menus and function items are explained in Using The MAP Utility (see p. 3-9).
NetWare Configuration 3-7
NetW are Configuration
Using Konica Network Management Utility
Using MAP (Management Access Program)
Select the Network Setup button on the left of the Main Screen to display the Network Setup screen, which
allows the selection of functions related to the KN-302 Print Server.
The MAP Network Setup allows you to access the Konica program and use the functions relating to the
System, Protocols and Printer. Simply click on the menu item you require, and the easy-to-use screens will
guide you through each procedure.
The bottom of your screen displays Home and Unit Info. Clicking on Home gets you back to the basic menu.
Clicking on Unit Info displays the current Ethernet option associated with this Printer Server .
To learn more about using the MAP Utility, see Using the MAP Utility which begins on the next page.
To configure the KN-302 Print Server for use with NetWare, see Configure KN-302 for Use With Novell
NetWar e p. 3-21.
NOTE: You will be required to enter a password to perform most of the functions.
The default password is sysadm. It is case-sensitive and must be entered in lowercase.
3-8 NetWare Configuration
NetW are Configuration
Using Konica Network Management Utility
Using The MAP Utility
System Functions
Reset
Factory Defaults
Unit Status
Novell NetW are
TCP/IP
AppleTalk
Network Address
Change Password
Protocols
Ports
Setup NetWare
Setup TCP/IP
Setup AppleT alk
T est Printer
Configure Status Page
Status Information
NetWare Configuration 3-9
Loading...