Konica Minolta Fiery PRO80 65-55C-KM, Fiery PRO 80, 65-55C-KM User Manual

Fiery PRO

Chapter 1: Introduction Chapter 2: Overview of the Scanning Features Chapter 3: Registration of the destination Chapter 4: Transmission to the registered destination Chapter 5: Utility Menu Chapter 6: Using Web Connection Chapter 7: Troubleshooting Chapter 8: Appendix

65-55C-KM

Network Scanner/Web Connection

Table of Contents

1 Introduction

1.1 Introduction ....................................................................................... 1-1

1.1.1 ACKNOWLEDGEMENTS: .............................................................. 1-1

1.1.2 EXEMPTION ................................................................................... 1-1

1.1.3 OpenSSL Statement ...................................................................... 1-2

1.2 About this Manual ............................................................................. 1-5

1.3 Manual Composition ........................................................................ 1-6

1.4 Conventions Used in this Manual ................................................... 1-7

1.5 How to read this Manual .................................................................. 1-8

2 Overview of the Scanning Features

2.1 Flow of the operations ..................................................................... 2-3

2.2 About the Control Panel ................................................................. 2-19

2.3 How to operate the Touch Panel .................................................. 2-21

2.4 How to Input Characters ................................................................ 2-22

2.5 About the Scanner Setting Screen ................................................ 2-24

2.6 Setting the Original Document ...................................................... 2-33

3 Registration of the destination

3.1 Registering an E-Mail Address ........................................................ 3-1

3.2 Registering the Hard Disk ................................................................ 3-5

3.3 Registering the FTP server .............................................................. 3-9

3.4 Registering the SMB server ........................................................... 3-13

3.5 Registering a Group ....................................................................... 3-17

3.6 Change/deletion of the details of the registration ....................... 3-20

3.7 How to Search ................................................................................ 3-21

4 Transmission to the registered destination

4.1 To use the function to register a job ............................................. 4-12

5 Utility Menu

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection i

Table of Contents

5.1 Address Edit ...................................................................................... 5-3

5.2 E-Mail Title Setting ........................................................................... 5-5

5.3 E-Mail Text Setting ........................................................................... 5-7

5.4 To set the Title, Text, Reply Address of the E-Mail ....................... 5-9

5.5 To set the initial value of the setting for scanning ...................... 5-12

6 Using Web Connection

6.1 User Mode ......................................................................................... 6-5

6.1.1 Method for access/Method for exit ................................................ 6-5

6.1.2 System tab ..................................................................................... 6-5

6.1.3 Box Tab ........................................................................................ 6-15

6.1.4 Print Tab ....................................................................................... 6-16

6.1.5 Scan Tab ...................................................................................... 6-17

6.1.6 Network Tab ................................................................................. 6-39

6.2 Administrator Mode ........................................................................ 6-42

6.2.1 Method for access/Method for exit .............................................. 6-42

6.2.2 System tab ................................................................................... 6-42

6.2.3 Box Tab ........................................................................................ 6-50

6.2.4 Scan Tab ...................................................................................... 6-58

6.2.5 Network Tab ................................................................................. 6-58

7 Troubleshooting

7.1 Cannot connect to the scanner ....................................................... 7-1

7.2 When an Error Message Appears ................................................... 7-2

8 Appendix

8.1 Glossary ............................................................................................. 8-1

8.2 Index .................................................................................................. 8-4

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection ii

Introduction

1 Introduction

1.1 Introduction

Thank you very much for purchasing the Fiery PRO80 65-55C-KM.

This User’s Guide describes the operating procedures and safety precautions of the Fiery PRO80 65-55C-KM so that you can handle it safely and make the best of its capabilities. Usually keep this manual close at hand for the convenience of reference later.

And also, be sure to read “User’s Guide (Copy) ‘Safety Information’” before operation.

1.1.1 ACKNOWLEDGEMENTS:

- KONICA MINOLTA, KONICA MINOLTA logo, and the essentials of imag-

ing are registered trademarks of KONICA MINOLTA HOLDINGS, INC..

- bizhub, bizhub PRO, and PageScope are trademarks of KONICA MI-

NOLTA BUSINESS TECHNOLOGIES, INC..

- Microsoft, MS, Windows and MS-DOS are registered trademarks or

trademarks of Microsoft Corporation in the United States and / or other countries.

- IBM is a registered trademarks of the IBM Corporation.

- Macintosh and PowerMac are registered trademarks or trademarks of

Apple Computer, Inc. in the United States and / or other countries.

- Adobe, Adobe Logo, Acrobat, Acrobat Logo, PostScript and PostScript

Logo are registered trademarks or trademarks of Adobe Systems, Inc..

- RC4® is a registered trademark or trademark of RSA Security Inc. in the

United States and/or other countries.

- Other company names and product names used in this manual are the

registered trademarks or trademarks of their respective companies.

1.1.2 EXEMPTION

- No part of this manual may be used or duplicated without permission.

- Manufacturer and Sales Company will have no liability for any influences

caused by using the printing system and this User’s Guide.

- The information written in this Network Scanner User’s Guide is subject

to change without prior notice.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 1-1

Introduction

1.1.3 OpenSSL Statement

OpenSSL License

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment:

– “This product includes software developed by the OpenSSL Project for

use in the OpenSSL Toolkit. (http://www.openssl.org/)”

4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact opensslcore@openssl.org.

5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment:

– “This product includes software developed by the OpenSSL Project for

use in the OpenSSL Toolkit (http://www.openssl.org/)”

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).

This product includes software written by Tim Hudson (tjh@cryptsoft.com).

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 1-2

Introduction

Original SSLeay License

This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code.

The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list

2. Redistributions in binary form must reproduce the above copyright no-

3. All advertising materials mentioning features or use of this software must

– “This product includes cryptographic software written by Eric Young

4. If you include any Windows specific code (or a derivative thereof) from

– “This product includes software written by Tim Hudson (tjh@crypt-

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

of conditions and the following disclaimer.

tice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

display the following acknowledgement:

(eay@cryptsoft.com)”The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related :-).

the apps directory (application code) you must include an acknowledgement:

soft.com)”

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 1-3

Introduction

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence].

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 1-4

Introduction

1.2 About this Manual

This is a user's guide for the network scanner function that employs Fiery

PRO

65-55C-KM.

The explanation here is given of the operation of the [SCAN] tab on the control panel and given of the operation of the scanner function using Web Connection. (Web Connection is a management utility supported by the HTTP server built into the print controller.)

The explanation is also given of the various setting methods of the Network Scanner displayed when pressing [Utility/Counter] on the control panel.

Reminder

Refer to the User’s Guide (Copy) or the User’s Guide (POD Administrator Reference) on how to use other button.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 1-5

Introduction

1.3 Manual Composition

This manual is composed of the following 8 chapters:

Chapter 1 Introduction

This chapter describes this User's Guide.

Chapter 2 Overview of the Scanning Features

This chapter describes the outline of the Network Scanner function and the flow of the operations.

Chapter 3 Registration of the destination

This chapter describes destination/storage location for the Network Scanner features.

Chapter 4 Transmission to the registered destination

This chapter describes the method for sending a message to the registered destination.

Chapter 5 Utility Menu

This chapter describes the Utility Menu of the Network Scanner function.

Chapter 6 Using Web Connection

This chapter describes the operation of the Network Scanner function using Web Connection.

Chapter 7 Troubleshooting

This chapter describes the major troubleshooting methods of the Network Scanner function.

Chapter 8 Appendix

The glossary and index regarding the scanning features.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 1-6

Introduction

1.4 Conventions Used in this Manual

Notation of each product

The following abbreviations are used in this manual:

1Fiery PRO80 65-55C-KM: print controller

2 Copier corresponding to Fiery

3 A system that combines the above

4 Microsoft Windows 98: Windows 98

5 Microsoft Windows Me: Windows Me

6 Microsoft Windows NT4.0: Windows NT4.0 or Windows NT

7 Microsoft Windows 2000: Windows 2000

8 Microsoft Windows XP: Windows XP

9 Microsoft Windows Vista Windows Vista

10 Microsoft Windows Server 2003: Server 2003

11 Macintosh OS X 10.2x - 10.5x Mac OS X

12 Above OSs: Windows 98/Me

65-55C-KM:

PRO

(1) and (2) products:

copier (or main body printer)

this system

Windows NT4.0/2000 Windows NT/2000/XP/Server 2003 Windows 98/Me/NT/2000/XP/Server 2003

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 1-7

Introduction

1.5 How to read this Manual

Show an object and feature of a procedure.

Describes operating procedures.

[ ] are used for the terms displayed on the screens.

Note

Explanations to supplement the body. Memos may be included in the body.

Detail

Hints and Advices on operating procedures.

Reminder!

Explains important notices on operating procedures.

Registration of the destination

3.7 How to Search

The Network Scanner features enables you to search the registered destination.

To make a search in the Search Character

Make a search by specifying the Search Character set while in the registration of the destination.

1 Select [SCAN] tab.

2 Press [E-Mail], [HDD], [FTP] and [SMB] in this order to display the Se-

lect Destinations screen in which there is a destination you want to search.

3 Press the corresponding Search Character.

The corresponding destination is displayed.

Detail

There are [A] to [Z], [Others] and [Common] available for the Search Character.

Destinations frequently used can be set to [Common]. For details of the method for setting the destination to [Common], contact your administrator.

Fiery PRO80 65-55C-KM Network Scanner/Web Connection 3-17

This page does not exist in the document.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 1-8

Overview of the Scanning Features

2 Overview of the Scanning Features

Data scanned by using the Network Scanner function can be sent to the EMail address, hard disk, FTP server or SMB server.

Scanned data saved in the hard disk can be imported by the utility tool to the computer connected to the network.

Scanned data can be saved in the PDF format as a print job (print queue) of the print controller.

Scanned data is transmitted in the following file format.

- Multi Page TIFF

- Single Page TIFF

- Multi Page PDF

- JPEG

Original

Mail server

E-Mail

FTP server

FTP

SMB server

QUEUE

(Print Job)

Hard Disk

SMB

InternetPrint Controller

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-1

Overview of the Scanning Features

Detail

When using [Scan to HDD], it is necessary to access in advance the Web page of the print controller to create a Box in HDD. For the method to create a Box on the Web page, see “User's Guide (Printer)”.

When using this function, the network for this machine must be set in advance. For details of the network setting, contact your administrator.

Scanned data may be destroyed. So, be absolutely sure to maintain the backup of the original.

TIFF and JPEG are saved in the form of being rotated 90 degrees counterclockwise after scanning.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-2

Overview of the Scanning Features

2.1 Flow of the operations

The explanation here is given of the flow of the operations in which the scanned data is input manually to be sent to the destination.

Detail

The destinations can be registered in advance. For destinations registered in advance, they can be set by just selecting them from the list. For details of the registration method of the destination, see “Registration of the destination” on page 3-1.

Flow of the operations Refer to:

Operation to attach the scanned data to the E-Mail for transmission

Operation to save the scanned data in the hard disk p. 2-7

Operation to send the scanned data to the FTP server p. 2-11

Operation to send the scanned data to the SMB server p. 2-14

Operation to save the scanned data as a print queue p. 2-17

To make a transmission in E-Mail

0 In order to use the Scan to E-mail function, the network setting of the

print controller is required in advance.

p. 2-3

1 Select [SCAN] tab.

2 Press [E-Mail].

3 Press [Address Input].

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-3

Overview of the Scanning Features

4 Press [Address].

– With [Register Name] and [Search Character] set, pressing [Regis-

ter] allows the destination to be registered. For details of the registration of the destination, see p. 3-1.

5 Enter the E-mail address of destination and then press [OK].

– For more information on how to input character, see p. 2-22.

6 Press [OK].

7 Press [Option Setting] as required to set [Title], [Text] and [Reply Ad-

dress] of the E-Mail.

– If you want to erase the history of [Option Setting], press [Reset] on

Control Panel.

– For detail of Option Setting, see p. 5-9.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-4

Overview of the Scanning Features

8 Press [Scan Settings].

9 Make a setting for scanning.

– When an address has been set in other items such as [HDD], two or

more addresses are displayed. Be sure to check the address before

starting the scanning of an original. – Press [Address] to return to the Select Destinations screen. – Pressing [Clear All] releases all of the information of the addresses

set. – For details of the Scanner Setting screen, see p. 2-24.

10 Set the original document.

– For the setting of originals, see p. 2-33.

11 Press [Start].

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-5

Overview of the Scanning Features

The original is read and the scanned data is transmitted.

Detail

After completion of the operation, press [Reset] on Control Panel in the Scanner Setting screen and the Select Destinations screen to release the settings. (Press [Address] to get back to the Select Destinations screen.) When no resetting is made, the settings are left as they are until copier is restarted.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-6

Overview of the Scanning Features

To save it in the hard disk

0 In order to use the Scan to HDD function, the network setting of the print

controller is required in advance.

0 It is necessary to access the [Box] tab (page 6-50) in the Administrator

Mode of the Web Connection or the Web page of the print controller to create in advance a box on the HDD.

1 Select [SCAN] tab.

2 Press [HDD].

3 Press [Address Input].

4 Press [Box Name].

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-7

Overview of the Scanning Features

– With [Register Name] and [Search Character] set, pressing [Regis-

ter] allows the destination to be registered. For details of the regis-

tration of the destination, see p. 3-5.

5 Enter the Box Name and then press [OK].

– For more information on how to input character, see p. 2-22. – For Box Name, enter the Box name that has been registered in ad-

vance in the [Box] tab (page 6-50) in the Administrator Mode of the

Web Connection or the Web page of the print controller.

6 Press [OK].

7 Press [Scan Settings].

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-8

Overview of the Scanning Features

8 Make a setting for scanning.

– When an address has been set in other items such as [E-Mail], two

or more addresses are displayed. Be sure to check the address be-

fore starting the scanning of an original. – Press [Address] to return to the Select Destinations screen. – Pressing [Clear All] releases all of the information of the addresses

set. – For details of the Scanner Setting screen, see p. 2-24.

9 Set the original document.

– For the setting of originals, see p. 2-33.

10 Press [Start].

The original is read and the scanned data is saved in the hard disk.

Detail

For the method for importing the scanned data saved in the hard disk into the computer, see “User's Guide (Printer)”.

For this machine, the maximum allowable attached file size (default: 1000 KB) can be set while in the scan setting. Depending on this setting, the scan data may not be attached to E-Mail, but saved in HDD. In cases like

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-9

Overview of the Scanning Features

this, download the scan data from the specified location within a fixed period of time.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-10

Overview of the Scanning Features

To make a transmission to the FTP server

0 In order to use the Scan to FTP function, the network setting of the print

controller is required in advance.

1 Select [SCAN] tab.

2 Press [FTP].

3 Press [Address Input].

4 Set [Host Address], [Login Name] and/or [Password] as required.

– If you want to erase the inputs, press [Reset] on Control Panel.

However, please note that all of the inputs (except for Proxy set-

tings) are erased. – For more information on how to input character, see p. 2-22.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-11

Overview of the Scanning Features

– For details of the setting of the FTP server, see p. 3-9. – With [Register Name] and [Search Character] set, pressing [Regis-

ter] allows the destination to be registered. For details of the regis-

tration of the destination, see p. 3-9.

5 Press [OK].

6 Press [Scan Settings].

7 Make a setting for scanning.

– When an address has been set in other items such as [E-Mail], two

or more addresses are displayed. Be sure to check the address be-

fore starting the scanning of an original. – Press [Address] to return to the Select Destinations screen. – Pressing [Clear All] releases all of the information of the addresses

set.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-12

Overview of the Scanning Features

– For details of the Scanner Setting screen, see p. 2-24.

8 Set the original document.

– For the setting of originals, see p. 2-22.

9 Press [Start].

The original is read and the scanned data is transmitted.

Detail

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-13

Overview of the Scanning Features

To make a transmission to the SMB server

0 In order to use the Scan to SMB function, the network setting of the print

controller is required in advance.

1 Select [SCAN] tab.

2 Press [SMB].

3 Press [Address Input].

4 Set [Host Address], [Login Name] and/or [Password] as required.

– If you want to erase the inputs, press [Reset] on Control Panel.

However, please note that all of the inputs are erased. – For more information on how to input character, see p. 2-22. – For details of the setting of the SMB server, see p. 3-13.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-14

Overview of the Scanning Features

– With [Register Name] and [Search Character] set, pressing [Regis-

ter] allows the destination to be registered. For details of the regis-

tration of the destination, see p. 3-13.

5 Press [OK].

6 Press [Scan Settings].

7 Make a setting for scanning.

– When an address has been set in other items such as [E-Mail], two

or more addresses are displayed. Be sure to check the address be-

fore starting the scanning of an original. – Press [Address] to return to the Select Destinations screen. – Pressing [Clear All] releases all of the information of the addresses

set. – For details of the Scanner Setting screen, see p. 2-24.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-15

Overview of the Scanning Features

8 Set the original document.

– For the setting of originals, see p. 2-33.

9 Press [Start].

The original is read and the scanned data is transmitted.

Detail

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-16

Overview of the Scanning Features

To save it as a Print Queue

1 Select [SCAN] tab.

2 Press [QUEUE].

3 Press [Scan Settings].

4 Make a setting for scanning.

– When an address has been set in other items such as [E-Mail], two

or more addresses are displayed. Be sure to check the address be-

fore starting the scanning of an original. – Press [Address] to return to the Select Destinations screen. – Pressing [Clear All] releases all of the information of the addresses

set. – For details of the Scanner Setting screen, see p. 2-24.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-17

Overview of the Scanning Features

5 Set the original document.

– For the setting of originals, see p. 2-33.

6 Press [Start].

The original is read and the scanned data is transmitted.

Detail

For details of the printing method of the scanned data saved as a Print Queue, see “User's Guide (Printer)”.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-18

Overview of the Scanning Features

2.2 About the Control Panel

For detailed information on names and functions of various parts of the Control Panel, refer to the User's Guide (Copy).

No. Name Description

1 Keypad Enters values for various settings, including the print

2 [Reset] key Restores machine to the initial settings.

3 [Interrupt] key Stops copying/printing/scanning in progress to allow a

4 [Stop] key Ceases the copying sequence; deletes the stored memo-

5 [Proof Copy] key Prints a single set of sample copy to check whether the

6 [Start] key Activates various machine operations.

7 [Start] LED Lights in green when machine operation is available, and

8 [C] (Clear) key Allows resetting of print quantity.

quantity and password.

simple copying job.

ry.

current settings are specified properly.

turns red if any operation cannot be started.

Fiery PRO80 65-55C-KM Network Scanner/ Web Connection 2-19

+ 143 hidden pages

Konica Minolta Fiery PRO80 65-55C-KM, Fiery PRO 80, 65-55C-KM User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1 Introduction

1.1 Introduction

1.1.1 ACKNOWLEDGEMENTS:

1.1.2 EXEMPTION

1.1.3 OpenSSL Statement

1.2 About this Manual

1.3 Manual Composition

1.4 Conventions Used in this Manual

1.5 How to read this Manual

2 Overview of the Scanning Features

2.1 Flow of the operations

2.2 About the Control Panel