Konica Minolta 160f User Manual
1
0
2
3
4
5
6
7
8
9
User Manual
160f
x
Contents
Contents
1Introduction
1.1 Safety information ............................................................................ 1-3
Warning and precaution symbols .................................................. 1-4
Meaning of symbols ....................................................................... 1-4
Disassemble and modification ....................................................... 1-5
Power cord ..................................................................................... 1-6
Power source ................................................................................. 1-7
Power plug ..................................................................................... 1-8
Grounding ...................................................................................... 1-9
Installation .................................................................................... 1-10
Ventilation .................................................................................... 1-11
Actions in response to troubles ................................................... 1-12
Consumables ............................................................................... 1-13
When moving the machine .......................................................... 1-14
Before successive holidays .......................................................... 1-14
1.2 Regulation notices .......................................................................... 1-15
CE Marking (Declaration of conformity) ....................................... 1-15
For U.S.A. Users
FCC Part 15-Radio frequency devices ........................................ 1-15
For Canada Users
Interference-Causing Equipment Standard (ICES-003 Issue 3) ... 1-17
For users in countries subject to class B regulations .................. 1-17
For users in countries not subject to class B regulations ............ 1-17
Laser safety .................................................................................. 1-17
Internal laser radiation .................................................................. 1-18
CDRH regulation .......................................................................... 1-19
For European users ...................................................................... 1-19
For Denmark users ....................................................................... 1-20
For Finland, Sweden users .......................................................... 1-20
For Norway users ......................................................................... 1-21
Laser safety label ......................................................................... 1-22
Ozone release .............................................................................. 1-23
Acoustic noise .............................................................................. 1-23
1.3 Energy Star® ................................................................................... 1-24
Energy Star® partner ................................................................... 1-24
What is an Energy Star® product? .............................................. 1-24
1.4 Trademarks and registered trademarks ....................................... 1-24
bizhub 160f x-3
1.5 Explanation of manual conventions ...............................................1-25
Safety advices ...............................................................................1-25
Sequence of action .......................................................................1-25
Tips ...............................................................................................1-26
Special text markings ...................................................................1-26
1.6 Explanation of basic concepts and symbols ................................1-27
Paper feeding ................................................................................1-27
Width and length ...........................................................................1-28
2Precaution
2.1 Installation precautions ....................................................................2-3
Installation site ................................................................................2-3
Power source ..................................................................................2-3
Space requirements ........................................................................2-4
2.2 Operation precautions ......................................................................2-5
Operating environment ...................................................................2-5
Proper use ......................................................................................2-5
Transporting the machine ...............................................................2-6
Care of machine supplies ...............................................................2-6
2.3 Legal restrictions on copying ...........................................................2-7
3 Before making copies or faxing
3.1 Available features ..............................................................................3-3
3.2 Components and their functions .....................................................3-4
3.3 Parts names and their functions ......................................................3-5
Main unit .........................................................................................3-5
Automatic document feeder ...........................................................3-7
Inside the machine ..........................................................................3-8
Adjusting the angle of the copy tray ...............................................3-9
Options .........................................................................................3-10
3.4 Control panel ...................................................................................3-12
Names of control panel parts and their functions .........................3-12
Display indications – in copy mode ..............................................3-15
Display indications – in fax mode .................................................3-16
Symbol list ....................................................................................3-17
3.5 Turning the machine on/off ............................................................3-18
Turning the machine on ................................................................3-18
Turning the machine off ................................................................3-19
3.6 Initial mode .......................................................................................3-20
x-4 bizhub 160f
3.7 Useful functions .............................................................................. 3-21
Panel resetting ............................................................................. 3-21
Auto panel reset ........................................................................... 3-21
Energy save mode ....................................................................... 3-22
Auto print start ............................................................................. 3-22
Auto tray switching ...................................................................... 3-22
3.8 Entering Text ................................................................................... 3-23
Key operation ............................................................................... 3-23
List of characters ......................................................................... 3-23
Charging Input Mode ................................................................... 3-23
Inputting Example ........................................................................ 3-24
3.9 Copy paper ...................................................................................... 3-26
Paper specifications ..................................................................... 3-26
Precautions for loading paper ...................................................... 3-27
Unsuitable paper .......................................................................... 3-27
Loading paper .............................................................................. 3-28
Loading paper into tray 1 ............................................................. 3-30
Loading paper into the bypass tray ............................................. 3-31
Loading paper into tray 2 (option) ................................................ 3-32
3.10 Loading originals ............................................................................ 3-33
Two ways of loading the original ................................................. 3-33
Specific types of originals ............................................................ 3-33
Loading originals in the automatic document feeder .................. 3-33
Precautions for loading paper into the
automatic document feeder ......................................................... 3-33
Loading originals into the automatic document feeder ............... 3-34
Placing the original on the original glass ..................................... 3-35
Positioning a sheet original .......................................................... 3-36
Positioning highly transparent originals ....................................... 3-37
Positioning books ........................................................................ 3-38
3.11 Checking the machine status ........................................................ 3-40
3.11.1 TOTAL PAGE ............................................................................... 3-41
Checking a TOTAL PAGE count .................................................. 3-41
3.11.2 TX/RX RESULT ............................................................................ 3-42
Checking the TX/RX RESULT ...................................................... 3-42
3.11.3 PRINT REPORT ............................................................................ 3-43
Printing a PRINT REPORT ........................................................... 3-43
TX Result report ........................................................................... 3-44
RX Result report ........................................................................... 3-44
Activity report ............................................................................... 3-45
Memory data list .......................................................................... 3-45
Memory image print ..................................................................... 3-45
One-touch list ............................................................................... 3-46
bizhub 160f x-5
Speed dial list ...............................................................................3-46
Key setting list ...............................................................................3-46
Machine status ..............................................................................3-46
Configuration page .......................................................................3-46
3.12 Print area ..........................................................................................3-47
4 Making copies
4.1 Basic copies .......................................................................................4-3
Making a basic copy .......................................................................4-3
4.2 Paper selection ..................................................................................4-5
Selecting the paper tray manually ..................................................4-5
Specifying the size and type of manually fed paper .......................4-6
4.3 Zoom ratio ........................................................................................4-10
Zoom ratio settings .......................................................................4-10
Specifying the zoom ratio .............................................................4-11
4.4 Image Density ..................................................................................4-12
Image density setting ....................................................................4-12
Specifiying the image density .......................................................4-13
4.5 2in1 copies .......................................................................................4-14
2in1 copy function ........................................................................4-14
Specifying settings for 2in1 copies ...............................................4-14
4.6 Finishing copies ...............................................................................4-15
Finishing modes ............................................................................4-15
Specifying sorting .........................................................................4-16
5Faxing
5.1 Dialing .................................................................................................5-3
Using direct dialing to communicate with overseas destinations ..5-3
To fax by entering the fax number directly using the 10-key pad ..5-3
To fax using one-touch dialing .......................................................5-5
To fax using speed dialing ..............................................................5-6
To fax using group dialing ..............................................................5-7
To fax using chain dialing ...............................................................5-8
To fax using program dialing ..........................................................5-9
To fax using the phone book ........................................................5-10
To search the phone book ............................................................5-11
To redial the last recipient called ..................................................5-13
5.2 Transmission settings .....................................................................5-14
Adjusting the fax resolution ..........................................................5-14
To specify the resolution ...............................................................5-14
x-6 bizhub 160f
5.3 Basic Faxing .................................................................................... 5-15
To fax using the automatic document feeder .............................. 5-15
To fax documents positioned on the original glass ..................... 5-17
If the memory becomes full while scanning fax documents ........ 5-18
5.4 Checking transmission results ...................................................... 5-19
To check the transmission result ................................................. 5-19
6 Fax transmission/Reception methods
6.1 Transmission methods ..................................................................... 6-3
6.1.1 Memory transmission ..................................................................... 6-3
To specify memory TX ................................................................... 6-3
6.1.2 Direct transmission ........................................................................ 6-5
6.1.3 Manual transmission ...................................................................... 6-6
To send a fax manually .................................................................. 6-6
6.1.4 Batch transmission ........................................................................ 6-8
To fax using batch transmission .................................................... 6-8
6.1.5 Broadcast transmission ................................................................. 6-9
To fax using broadcast transmission ............................................. 6-9
6.1.6 Timer transmission ....................................................................... 6-12
To fax using timer transmission ................................................... 6-12
6.1.7 Mailbox transmission ................................................................... 6-14
To fax using mailbox transmission ............................................... 6-14
6.1.8 Relay initiation transmission ........................................................ 6-16
To fax using relay initiation transmission ..................................... 6-16
6.1.9 Polling Transmission .................................................................... 6-18
To set up polling transmission ..................................................... 6-18
To delete a document from the polling transmission setup ......... 6-19
6.1.10 Canceling (Deleting) a Document Queued in the Memory for
Transmission ................................................................................ 6-21
To cancel a queued document .................................................... 6-21
6.2 Reception methods ........................................................................ 6-23
6.2.1 Manual reception ......................................................................... 6-23
To receive a fax manually ............................................................ 6-23
6.2.2 Memory reception ........................................................................ 6-23
6.2.3 Mailbox reception ........................................................................ 6-24
To retrieve a document from a mailbox ....................................... 6-24
bizhub 160f x-7
6.2.4 Polling Reception ..........................................................................6-25
To receive a fax using polling reception .......................................6-25
6.3 Using F codes ..................................................................................6-27
6.3.1 Using Mailboxes ...........................................................................6-28
Specifying mailboxes ....................................................................6-28
F code mailbox transmission/reception ........................................6-28
6.3.2 Specifying F codes .......................................................................6-29
When sending faxes .....................................................................6-29
Programming F codes ..................................................................6-29
7 Using the utility mode
7.1 Machine settings ...............................................................................7-4
Selecting the MACHINE SETTING menu ........................................7-6
Specifying AUTO PANEL RESET ....................................................7-7
Specifying ENERGY SAVE MODE ..................................................7-8
Specifying DENSITY (ADF) .............................................................7-8
Specifying DENSITY (BOOK) ..........................................................7-9
Specifying PRINT DENSITY ............................................................7-9
Specifying LCD CONTRAST .........................................................7-10
Specifying LANGUAGE .................................................................7-10
Specifying LAMP OFF TIME .........................................................7-11
Specifying BUZZER VOLUME ......................................................7-11
Specifying INITIAL MODE .............................................................7-12
7.2 Paper source settings .....................................................................7-13
Selecting the PAPER SOURCE SETUP menu ..............................7-13
Specifying TRAY1 PAPER ............................................................7-14
Specifying TRAY SETTING ...........................................................7-16
7.3 User management settings ............................................................7-17
Selecting the USER MANAGEMENT menu ..................................7-17
7.4 Admin. management settings ........................................................7-18
Selecting the ADMIN. MANAGEMENT menu ...............................7-19
Specifying REMOTE MONITOR ....................................................7-20
7.5 Copy settings ...................................................................................7-21
Selecting the COPY SETTING menu ............................................7-22
Specifying PAPER PRIORITY .......................................................7-22
Specifying DENSITY PRIORITY ....................................................7-23
Specifying DENSITY LEVEL (A) ....................................................7-23
Specifying DENSITY LEVEL (M) ....................................................7-24
Specifying OUTPUT PRIORITY .....................................................7-24
Specifying RESOLUTION ..............................................................7-25
x-8 bizhub 160f
7.6 Fax registration settings ................................................................ 7-26
Selecting the FAX REGISTRATION menu .................................... 7-27
Specifiying ONE-TOUCH DIAL .................................................... 7-28
To program a one-touch dial key ................................................. 7-28
To change/delete a programmed one-touch dial key .................. 7-30
Specifying SPEED DIAL ............................................................... 7-32
To program a speed dial number ................................................. 7-32
To change/delete a programmed speed dial number .................. 7-34
Specifying GROUP DIAL .............................................................. 7-36
To program a group of fax numbers ............................................ 7-36
To change/delete a programmed group of fax numbers ............. 7-38
Specifying PROGRAM DIAL ........................................................ 7-40
To set program dialing ................................................................. 7-40
To change/delete a programmed broadcast transmission .......... 7-42
To change/delete a programmed timer transmission .................. 7-43
To change/delete a programmed mailbox transmission ............. 7-45
To change/delete a programmed polling reception ..................... 7-47
To change/delete a programmed relay initiation transmission .... 7-49
Specifying BATCH TX .................................................................. 7-51
To set batch transmitting ............................................................. 7-51
To change the batch transmission setting ................................... 7-53
To delete the batch transmission setting ..................................... 7-54
Specifying MAILBOX .................................................................... 7-55
To register a mailbox ................................................................... 7-55
To delete a mailbox ...................................................................... 7-56
7.7 TX operation settings ..................................................................... 7-57
Selecting the TX OPERATION menu ............................................ 7-58
Specifying SCAN CONTRAST ..................................................... 7-58
Specifying RESOLUTION ............................................................. 7-59
Specifying DEFAULT TX .............................................................. 7-60
Specifying HEADER ..................................................................... 7-60
7.8 RX operation settings ..................................................................... 7-61
Selecting the RX OPERATION menu ........................................... 7-63
Specifying MEMORY RX MODE .................................................. 7-64
To cancel memory reception ....................................................... 7-65
Specifying NO. of RINGS ............................................................. 7-65
Specifying REDUCTION RX ......................................................... 7-66
Specifying RX PRINT ................................................................... 7-66
Specifying RX MODE ................................................................... 7-66
Specifying FORWARD ................................................................. 7-67
Specifying FOOTER ..................................................................... 7-68
Specifying SELECT TRAY ............................................................ 7-68
Specifying CLOSED NETWORK .................................................. 7-69
bizhub 160f x-9
7.9 Communication settings .................................................................7-70
Selecting the COMM. SETTING menu ..........................................7-70
Specifying TONE/PULSE ..............................................................7-71
To specify the telephone dialing system ......................................7-71
Specifying LINE MONITOR ...........................................................7-72
Specifying PSTN/PBX ...................................................................7-73
To specify the telephone wiring system .......................................7-73
7.10 Reporting settings ...........................................................................7-74
Selecting the REPORTING menu ..................................................7-75
Specifying ACTIVITY REPORT ......................................................7-75
Specifying RESERV.REPORT .......................................................7-76
Specifying TX RESULT REPORT ..................................................7-76
Specifying RX RESULT REPORT ..................................................7-76
7.11 Initial user data settings .................................................................7-77
Selecting the INITIAL USER DATA menu .....................................7-77
Specifying DATE&TIME ................................................................7-78
Specifying USER FAX NO. ............................................................7-78
Specifying USER NAME ...............................................................7-79
8 When a message appears
8.1 When the message PAPER EMPTY appears ..................................8-3
PAPER EMPTY message ................................................................8-3
Loading paper into tray 1 ................................................................8-4
Loading paper into the bypass tray ................................................8-4
Loading paper into tray 2 (option) ...................................................8-5
8.2 When the message TONER EMPTY appears ..................................8-6
TONER EMPTY message ...............................................................8-6
Replacing the toner cartridge .........................................................8-7
8.3 When the message D/C LIFE appears ...........................................8-11
Replacing the drum cartridge .......................................................8-12
8.4 When the message PAPER MISFEED appears .............................8-15
PAPER MISFEED message ..........................................................8-15
Clearing a paper misfeed in the paper trays .................................8-15
8.5 When the message PAPER JAM appears .....................................8-18
PAPER JAM message ...................................................................8-18
Clearing a paper misfeed in the machine .....................................8-18
8.6 When the message ORIGINAL DOC. JAM appears ......................8-22
ORIGINAL DOC. JAM message ....................................................8-22
Clearing a paper misfeed in automatic document feeder .............8-22
x-10 bizhub 160f
8.7 When the message PAPER SIZE ERROR appears ...................... 8-24
PAPER SIZE ERROR message .................................................... 8-24
Paper size error for tray 1 ............................................................ 8-24
Paper size error for the bypass tray ............................................. 8-25
8.8 When the message MACHINE TROUBLE appears ...................... 8-27
8.9 What does each message mean? ................................................. 8-28
8.10 When incorrect copies are produced ........................................... 8-30
8.11 The machine is not functioning as designed ............................... 8-33
8.12 When faxing is not performed correctly ....................................... 8-34
Faxes cannot be sent ................................................................... 8-34
Faxes cannot be received ............................................................ 8-35
Calls cannot be sent .................................................................... 8-36
9 Miscellaneous
9.1 Specifications ................................................................................... 9-3
bizhub 160f .................................................................................... 9-3
Automatic document feeder .......................................................... 9-4
Paper feed unit PF-501 .................................................................. 9-5
9.2 List of utility/function menu commands ......................................... 9-6
Utility menu commands ................................................................. 9-6
Function menu commands ............................................................ 9-8
9.3 Care of the machine ......................................................................... 9-9
Cleaning ......................................................................................... 9-9
Housing cover ................................................................................ 9-9
Original glass .................................................................................. 9-9
Original pad .................................................................................. 9-10
Control panel ................................................................................ 9-10
9.4 Function combination matrix ......................................................... 9-11
Conditions for combined functions .............................................. 9-11
Conditions for combined functions .............................................. 9-11
9.5 Glossary ........................................................................................... 9-12
9.6 Paper size and zoom ratio tables .................................................. 9-13
Paper sizes ................................................................................... 9-13
Zoom ratios .................................................................................. 9-14
10 Index
bizhub 160f x-11
x-12 bizhub 160f
1
Introduction
Introduction
1Introduction
1.1 Safety information
This section contains detailed instructions on the operation and maintenance
of this machine. To achieve optimum utility of this device, all operators
should carefully read and follow the instructions in this manual.
Please read the following section before connecting the machine to the supply. It contains important information related to user safety and preventing
equipment problems.
Please keep this manual in a handy place near the machine.
Make sure you observe all of the precautions appear in each section of this
manual.
KM_Ver.01E_F
2
Note
Some parts of the contents of this section may not correspond with the
purchased product.
1
bizhub 160f 1-3
1
Introduction
Warning and precaution symbols
The following indicators are used on the warning labels or in this manual to
categorize the level of safety warnings.
7 WARNING
Ignoring this warnings could cause serious injury or even death.
% Do not ignore this safety advices.
7 CAUTION
Ignoring this cautions could cause injury or damage to property.
% Do not ignore this safety advices.
Meaning of symbols
Symbol Meaning Example Meaning
A triangle indicates a danger
against which you should take
precaution.
A diagonal line indicates a prohibited course of action.
This symbol warns against possible causes of burns.
This symbol warns against dismantling the device.
A black circle indicates an imperative course of action.
This symbol indicates you must
unplug the device.
1-4 bizhub 160f
Introduction
Disassemble and modification
7 WARNING
Ignoring this warnings could cause serious injury or even death.
% Do not ignore this safety advices.
Warning Symbol
• Do not attempt to remove the covers and panels which have
been fixed to the product. Some products have a high-voltage part or a laser beam source inside that could cause an
electrical shock or blindness.
• Do not modify this product, as a fire, electrical shock, or
breakdown could result. If the product employs a laser, the
laser beam source could cause blindness.
1
bizhub 160f 1-5
1
Introduction
Power cord
7 WARNING
Ignoring this warnings could cause serious injury or even death.
% Do not ignore this safety advices.
Warning Symbol
• Use only the power cord supplied in the package. If a power
cord is not supplied, only use the power cord and plug that
is specified in POWER CORD INSTRUCTION. Failure to use
this cord could result in a fire or electrical shock.
• Use the power cord supplied in the package only for this machine and NEVER use it for any other product. Failure to observe this precaution could result in a fire or electrical shock.
• Do not scratch, abrade, place a heavy object on, heat, twist,
bend, pull on, or damage the power cord. Use of a damaged
power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately turn
OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative.
1-6 bizhub 160f
Introduction
Power source
7 WARNING
Ignoring this warnings could cause serious injury or even death.
% Do not ignore this safety advices.
Warning Symbol
• Use only the specified power source voltage. Failure to do
that could result in a fire or electrical shock.
• Connect power plug directly into wall outlet having the same
configuration as the plug. Use of an adapter leads to the
product connecting to inadequate power supply (voltage,
current capacity, grounding), and may result in fire or shock.
If proper wall outlet is not available, the customer shall ask
qualified electrician for the installation.
• Do not use a multiple outlet adapter nor an extension cord in
principle. Use of an adapter or an extension cord could cause
a fire or electrical shock.
Contact your authorized service representative if an extension cord is required.
• Consult your authorized service representative before connecting other equipment on the same wall outlet. Overload
could result in a fire.
1
7 CAUTION
Ignoring this cautions could cause injury or damage to property.
% Do not ignore this safety advices.
Caution Symbol
• The outlet must be near the equipment and easily a ccessible.
Otherwise you can not pull out the power plug when an emergency occurs.
bizhub 160f 1-7
1
Introduction
Power plug
7 WARNING
Ignoring this warnings could cause serious injury or even death.
% Do not ignore this safety advices.
Warning Symbol
• Do not unplug and plug in the power cord with a wet hand,
as an electrical shock could result.
• Plug the power cord all the way into the power outlet. Failure
to do this could result in a fire or electrical shock.
7 CAUTION
Ignoring this cautions could cause injury or damage to property.
% Do not ignore this safety advices.
Caution Symbol
• Do not tug the power cord when unplugging. Pulling on the
power cord could damage the cord, resulting in a fire or electrical shock.
• Remove the power plug from the outlet more than one time a
year and clean the area between the plug terminals. Dust that
accumulates between the plug terminals may cause a fire.
1-8 bizhub 160f
Introduction
Grounding
7 WARNING
Ignoring this warnings could cause serious injury or even death.
% Do not ignore this safety advices.
Warning Symbol
• Connect the power cord to an electrical outlet that is
equipped with a grounding terminal.
1
bizhub 160f 1-9
1
Introduction
Installation
7 WARNING
Ignoring this warnings could cause serious injury or even death.
% Do not ignore this safety advices.
Warning Symbol
• Do not place a flower vase or other container that contains
water, or metal clips or other small metallic objects on this
product. Spilled water or metallic objects dropped inside the
product could result in a fire, electrical shock, or breakdown.
Should a piece of metal, water, or any other similar foreign
matter get inside the product, immediately turn OFF the power switch, unplug the power cord from the power outlet, and
then call your authorized service representative.
7 CAUTION
Ignoring this cautions could cause injury or damage to property.
% Do not ignore this safety advices.
Caution Symbol
• After installing this product, mount it on a secure base. If the
unit moves or falls, it may cause personal injury.
• Do not place the product in a dusty place, or a site exposed
to soot or steam, near a kitchen table, bath, or a humidifier.
A fire, electrical shock, or breakdown could result.
• Do not place this product on an unstable or tilted bench, or
in a location subject to a lot of vibration and shock. It could
drop or fall, causing personal injury or mechanical breakdown.
• Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a
fire or malfunction.
• Do not use flammable sprays, liquids, or gases near this
product, as a fire could result.
1-10 bizhub 160f
Introduction
Ventilation
7 CAUTION
Ignoring this cautions could cause injury or damage to property.
% Do not ignore this safety advices.
Caution Symbol
• Always use this product in a well ventilated location. Operating the product in a poorly ventilated room for an extended
period of time could injure your health. Ventilate the room at
regular intervals.
1
bizhub 160f 1-11
1
Introduction
Actions in response to troubles
7 WARNING
Ignoring this warnings could cause serious injury or even death.
% Do not ignore this safety advices.
Warning Symbol
• Do not keep using this product, if this product becomes inordinately hot or emits smoke, or unusual odor or noise. Immediately turn OFF the power switch, unplug the power cord
from the power outlet, and then call your authorized service
representative. If you keep on using it as is, a fire or electrical
shock could result.
• Do not keep using this product, if this product has been
dropped or its cover damaged. Immediately turn OFF the
power switch, unplug the power cord from the power outlet,
and then call your authorized service representative. If you
keep on using it as is, a fire or electrical shock could result.
7 CAUTION
Ignoring this cautions could cause injury or damage to property.
% Do not ignore this safety advices.
Caution Symbol
• The inside of this product has areas subject to high temperature, which may cause burns.
When checking the inside of the unit for malfunctions such as
a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a “Caution HOT” caution
label.
1-12 bizhub 160f
Introduction
Consumables
7 WARNING
Ignoring this warnings could cause serious injury or even death.
% Do not ignore this safety advices.
7 CAUTION
Ignoring this cautions could cause injury or damage to property.
% Do not ignore this safety advices.
Warning Symbol
• Do not throw the toner cartridge or toner into an open flame.
The hot toner may scatter and cause burns or other damage.
Caution Symbol
• Do not leave a toner unit or drum unit in a place within easy
reach of children. Licking or ingesting any of these things
could injure your health.
1
• Do not store toner units and PC drum units near a floppy disk
or watch that are susceptible to magnetism. They could
cause these products to malfunction.
bizhub 160f 1-13
1
Introduction
When moving the machine
7 CAUTION
Ignoring this cautions could cause injury or damage to property.
% Do not ignore this safety advices.
Caution Symbol
• Whenever moving this product, be sure to disconnect the
power cord and other cables. Failure to do this could damage
the cord or cable, resulting in a fire, electrical shock, or
breakdown.
• When moving this product, always hold it by the locations
specified in the User’s Guide or other documents. If the unit
falls it may cause severe personal injury. The product may
also be damaged or malfunction.
Before successive holidays
7 CAUTION
Ignoring this cautions could cause injury or damage to property.
% Do not ignore this safety advices.
Caution Symbol
• Unplug the product when you will not use the product for
long periods of time.
1-14 bizhub 160f
Introduction
1.2 Regulation notices
CE Marking (Declaration of conformity)
This product complies with the following EU directives:
89/336/EEC, 73/23/EEC and 93/68/EEC directives.
This declaration is valid for the region of the European Union.
7 CAUTION
Interference with radio communications.
% This device must be used with shielded interface cables. The use of
non-shielded cable is likely to result in interference with radio communications and is prohibited under EU directives.
For U.S.A. Users FCC Part 15-Radio frequency devices
FCC: Declaration of conformity
Product type Multi function product
Product name bizhub 160/161
Options
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
• This device may not cause harmful interference, and this device must accept any interference
received, including interference that may cause undesired operation.
1
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interface by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
bizhub 160f 1-15
1
Introduction
7 WARNING
Any changes made by the purchaser or user without first contacting the
manufacturer will be subject to penalty under FCC regulations.
% The design and production of this unit conform to FCC regulations, and
any changes or modifications must be registered with the FCC and are
subject to FCC control.
7 CAUTION
Interference to radio communications.
% This device must be used with shielded interface cables. The use of
non-shielded cable is likely to result in interference with radio communications and is prohibited under FCC rules.
1-16 bizhub 160f
Loading...