Konica PS7000 User Manual

Face-up scanning: keeps
77
handling to a minimum, saving time, protecting bindings and reducing wear on originals.
area up to 17” x 23-3/8”, the PS7000 can accommodate large ledgers and records, archival volumes, art books and graphics.
with the scanning
Protects spines and bindings:
book table center section lowers to protect the spines of bound books and ledgers; optional 90° Angle Book Holder lets you scan volumes without opening them completely.
Fast scanning: just 4.5 seconds
per page for 8-1/2” x 11” volumes; scan-once/copy-many output lets you produce multiple copies from a single scan.
Automatic compensation:
for center curvature of bound volumes, plus auto masking of centerline shadows, outside borders and images of fingers holding pages.
Dual output: a single button
switches scan output from direct-print mode to PC-connect mode, so you can easily switch between hard-copy scanning and scanning to PC for electronic storage or distribution.
Simple operation: intuitive
on-scr
een menus and logical
contr
ols make scanning simple, even for first-time users; PC Interface Kit option makes PC hookup easy Switch r long scanning sessions.
, optional Foot
educes fatigue during
LCD display on scanner:
for gr
eater ease of use, with visual cues including scan settings, scaling, and image enhancements, as well as copying commands such as sorting, stamping and collating.
Clean, crisp image r
up to 600 dpi for 11” x 17” originals, up to 400 dpi for 17” x 23-3/8” originals.
Optional high-quality MSP3000 laser printer
11” x 17” output capability.
esolution:
with
Digital Publication Scanner. It’s a faster, easier way to scan large-sized books, archives, artwork, and
ledgers. Protect bindings and reduce handling. Compensate for page curvature. Eliminate centerline shadows, borders, even fingers holding pages. It’s an ideal solution to your publication scanning needs.
PS7000
PS7000
77
A BUSINESS
© 2004 KONICA MINOL
SOLUTIONS U.S.A., INC.
reserved. Reproduction in whole or in part without written permission is prohibited. Konica Minolta and The essentials of imaging are trademarks of KONICA MINOLTA HOLDINGS, INC. All other brands and product names are registered trademarks or trademarks of their respective owners.
Minolta Corporation fully encourages compliance with U.S. statutory law that prohibits the copying of certain documents under certain circumstances. For instance, copyrighted material cannot be copied unless permission fr owner has been obtained or the copying falls within the “fair use” or library reproduction rights provision of the copyright law these provisions can be obtained from the Copyright Office, Library of Congress, Washington, D.C. 20559 (r
equest circular R21).
*
Design & specifications are subject to change without notice.
T
All rights
om the copyright
. Further information on
General Specifications
TYPE:
Face-up Planetary Scanner
SCAN METHOD:
1-bit Monochr 8-bit Grayscale (optional)
SCAN AREA:
17" x 23-3/8" (maximum)
SCANNING SPEED:
4.5 seconds per page (8 1/2" x 11")
RESOLUTION:
ome
600 dpi (11" x 17") 400 dpi (17" x 23-3/8")
IMAGE SENSOR:
Reduction-type line CCD
(7500 pixels)
PROJECTION LAMP:
Long cylindrical halogen
(DC150 V, 620 W, 5000 lux)
EXPOSURE ADJUSTMENT:
Auto (9 steps) or Manual (9 steps)
FOCUS:
Auto or Manual
MAGNIFICATION/REDUCTION:
50% - 200%
HARDWARE INTERFACE:
Video I/F (Printer) SCSI-2 (PC) (Switchable at LCD panel)
SOFTWARE INTERFACE:
TWAIN ISIS (1-bit only)
DIMENSIONS (WxDxH):
28-3/4” x 29-5/8” x 38-3/8” (730 x 745 x 975mm)
WEIGHT:
140 lbs. (64kg)
POWER REQUIREMENTS:
, 60 Hz
120 V
POWER CONSUMPTION:
Less than 1000 W
OPTIONS:
Angle Book Holder PC Interface Kit Foot Switch Grayscale
Scanning Features:
IMAGE CORRECTION:
Curved text line correction by
zoom adjustment
SHADOW ERASURE:
Erases the shadow generated
between pages
FINGER MASKING:
Erases fingers holding the original
FRAME MASKING:
Masks left, right, and bottom
borders
CENTERING:
Centers scanned image for
output
TEXT/PHOTO MODES:
Outline accentuation and
smoothing
MSP3000 Laser Printer:
pr
ovides high-resolution hard-copy
output of prints up to 11” x 17”
MSP3000 Printer Specifications:
PRINTING METHOD:
Laser Electr
FIRST PRINT SPEED:
ostatic
13 sec. (8-1/2” x 11”)
PRINT SIZE:
11” x 17” (portrait) 8-1/2” x 11” (portrait/landscape) 8-1/2” x 14” (portrait)
PAPER SUPPLY:
150-sheet tray 250-sheet cassette 500-sheet letter size cassette
(optional)
Third paper tray with 250-sheet
universal tray (optional)
Maximum paper capacity:
1,150 sheets
DEVELOPING SYSTEM:
Micro-Toning
WARM-UP TIME:
Less than 70 sec.
DIMENSIONS (W x D x H):
22” x 20-1/2” x 16” (561 x 521 x 409mm)
WEIGHT:
61 lbs. 12 oz. (28kg)
POWER REQUIREMENTS:
120 V, 60 Hz
POWER CONSUMPTION:
Less than 750 W
A
KONICA MINOL BUSINESS SOLUTIONS U.S.A., INC.
100 Williams Drive Ramsey, NJ 07446
www.kmbs.konicaminolta.us
T
Item #: ps7000ss
Loading...