Konica K-28 HS User Manual
Graphic Imaging International 71 Charles St., Glen Cove, NY 11542
PHONE :(516) 674-2500 FAX :(516) 674-2727
Konica K-28 HS(OL) Pre-Installation Information(US)
Thank you for purchasing the Konica K-28 HS(OL) processor. In order to ensure a quick
and smooth installation, certain prerequisites must be in place. The K-28 HS(OL) is delivered on a pallet __”x__” in size ! A pallet jack or a forklift is a requirement upon receipt of
your processor.
Space requirements :
Minimum clearance for service
front - Connected to Imagesetter
36” left side
36” right side
36” rear
Machine dimensions
Width 50”
Depth 72”
Height 43”
72”
43”
Shipping dimensions
Width __”
Depth __”
Height __”
Weight Shipping 1113 lbs.
Unpacked 738 lbs.
Process ready 1124 lbs.
ENVIROMENTAL REQUIREMENTS
Operating Temperature : 10°-25°C (50°-77°F)
Humidity range: 50-60% RH, non-condensing.
POWER REQUIRMENT
230VAC +10% / -14% (198-253V) 50A or 30A* Single Phase, with ground.
*Power Share function must be turned on by Konica Service Engineer in order to
operat the processor on a 30A circuit..
WATER SUPPLY
Washing machine hose connection, no more then 6’ from the processor
Consumption: .9 Gal./Min when processing
Pressure: 22-87psi
Temperature: 41 - 104°F
50”
Pre-inst_K28HS.p65 Page - 1-
DRAIN
Must be within 6’ of processor.
NO higher then 15” from floor level.
Should be able to handle 5 gals. / min.
EXHAUST
Can be connected to external exhaust system
Hose connection: 4”
3
Flow rate: 530 ft
/ hr. Max
AIR CONDITIONING REQUIRMENT
26,000 Btu/hr Max.
Side view
107”
47.25”
39”
EVJetsetter
9200
Top view
35”
62.2”
Drain Connection
43”
9.8”
50”
Power Connection
Water Connection
Pre-inst_K28HS.p65 Page - 2-
Loading...