konica C360i, C300i, C250i Service Manual

Download

Page 1

SERVICE MANUAL

Function Version 1.0

Date: 2019/04/23

Page 2

A SAFETY AND IMPORTANT WARNING ITEMS ............................................................................A-1

1. IMPORTANT NOTICE..............................................................................................................................................A-2

2. DESCRIPTION ITEMS FOR DANGER, WARNING AND CAUTION.......................................................................A-3

2.1 Description items in this Service Manual .................................................................................................................................A-3

2.2 Description items for safety and important warning items .......................................................................................................A-3

3. SAFETY WARNINGS...............................................................................................................................................A-4

3.1 MODIFICATIONS NOT AUTHORIZED BY KONICA MINOLTA, INC. ....................................................................................A-4

3.1.1 Actions requiring special attention..................................................................................................................................A-4

3.2 POWER PLUG SELECTION ...................................................................................................................................................A-5

3.2.1 Power Cord Set or Power Plug.......................................................................................................................................A-5

3.3 CHECKPOINTS WHEN PERFORMING ON-SITE SERVICE .................................................................................................A-7

3.3.1 Power Supply .................................................................................................................................................................A-7

3.3.2 Installation Requirements.............................................................................................................................................A-11

3.3.3 After Service.................................................................................................................................................................A-13

3.4 Used Batteries Precautions ...................................................................................................................................................A-19

3.4.1 ALL Areas.....................................................................................................................................................................A-19

3.4.2 Germany.......................................................................................................................................................................A-19

3.4.3 France ..........................................................................................................................................................................A-19

3.4.4 Denmark.......................................................................................................................................................................A-19

3.4.5 Finland, Sweden...........................................................................................................................................................A-19

3.4.6 Norway .........................................................................................................................................................................A-19

3.5 Laser Safety...........................................................................................................................................................................A-20

3.5.1 Laser Safety .................................................................................................................................................................A-20

3.5.2 Internal Laser Radiation ...............................................................................................................................................A-20

3.5.3 Laser Safety Label........................................................................................................................................................A-21

3.5.4 Laser Warning Label ....................................................................................................................................................A-22

3.5.5 PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT....................................................................................A-22

4. WARNING INDICATIONS ON THE MACHINE......................................................................................................A-23

4.1 Warning indications inside the machine ................................................................................................................................A-23

4.2 Warning indications on the boards ........................................................................................................................................A-24

5. MEASURES TO TAKE IN CASE OF AN ACCIDENT ............................................................................................A-25

B NOTATION OF THE CONTENTS ..................................................................................................B-1

1. PRECAUTION ON HANDLING THIS MANUAL.......................................................................................................B-1

2. PRODUCT NAME ....................................................................................................................................................B-2

3. BRAND NAME..........................................................................................................................................................B-3

4. FEEDING DIRECTION.............................................................................................................................................B-4

5. Note for the Specifications........................................................................................................................................ B-5

C PRODUCT OUTLINE .....................................................................................................................C-1

1. PRODUCT SPECIFICATIONS.................................................................................................................................C-1

1.1 bizhub C360i/C300i/C250i ...................................................................................................................................................... C-1

1.1.1 Basic specifications ........................................................................................................................................................C-1

1.1.2 Paper..............................................................................................................................................................................C-2

1.1.3 Print volume....................................................................................................................................................................C-3

1.1.4 Machine specification .....................................................................................................................................................C-3

1.1.5 Print function...................................................................................................................................................................C-4

1.1.6 Scan function..................................................................................................................................................................C-4

1.1.7 Web browser function.....................................................................................................................................................C-5

1.2 DF-632 .................................................................................................................................................................................... C-5

1.3 DF-714 .................................................................................................................................................................................... C-7

1.4 PC-116/PC-216 ...................................................................................................................................................................... C-9

1.5 PC-416.................................................................................................................................................................................. C-10

1.6 LU-302 .................................................................................................................................................................................. C-11

1.7 JS-506 .................................................................................................................................................................................. C-11

1.8 FS-533 .................................................................................................................................................................................. C-12

1.9 PK-519 .................................................................................................................................................................................. C-14

1.10 FS-536/FS-536SD ...............................................................................................................................................................C-14

1.11 PK-520.................................................................................................................................................................................C-17

1.12 CU-102 ................................................................................................................................................................................C-17

Page 3

1.13 FK-514/FK-515 ....................................................................................................................................................................C-17

1.13.1 Basic specifications ....................................................................................................................................................C-17

1.13.2 Functional specifications ............................................................................................................................................C-20

1.13.3 Network fax specifications ..........................................................................................................................................C-24

1.14 i-Option ................................................................................................................................................................................C-26

1.14.1 Available function for i-Option.....................................................................................................................................C-26

2. OVERALL COMPOSITION ....................................................................................................................................C-27

2.1 SYSTEM CONFIGURATION ................................................................................................................................................ C-27

2.1.1 System configuration ....................................................................................................................................................C-27

2.1.2 Optional configuration...................................................................................................................................................C-28

2.2 SECTION CONFIGURATION............................................................................................................................................... C-29

2.3 Paper path ............................................................................................................................................................................ C-30

2.4 CONTROL BLOCK DIAGRAM ............................................................................................................................................. C-30

2.5 IMAGE CREATION PROCESS ............................................................................................................................................ C-31

2.6 IMAGE FORMING CONTROL.............................................................................................................................................. C-32

D SERVICE TOOL .............................................................................................................................D-1

1. bizhub C360i/C300i/C250i ........................................................................................................................................D-1

2. Utility tool ..................................................................................................................................................................D-2

2.1 IC card information setting tool of card reader........................................................................................................................ D-2

2.1.1 Outline ............................................................................................................................................................................D-2

2.1.2 IC card information setting procedures...........................................................................................................................D-2

3. DF-632......................................................................................................................................................................D-7

4. DF-714......................................................................................................................................................................D-8

E MAINTENANCE .............................................................................................................................E-1

1. Concept of maintenance...........................................................................................................................................E-1

2. Periodical replacement parts list...............................................................................................................................E-2

2.1 bizhub C360i/C300i/C250i .......................................................................................................................................................E-2

2.2 DF-632 .....................................................................................................................................................................................E-2

2.3 DF-714 .....................................................................................................................................................................................E-2

2.4 PC-116/PC-216 .......................................................................................................................................................................E-3

2.5 PC-416.....................................................................................................................................................................................E-3

2.6 LU-302 .....................................................................................................................................................................................E-3

2.7 FS-533 .....................................................................................................................................................................................E-3

2.8 FS-536/FS-536SD ...................................................................................................................................................................E-3

3. Periodical replacement procedure ............................................................................................................................E-4

3.1 bizhub C360i/C300i/C250i .......................................................................................................................................................E-4

3.1.1 Replacing the tray 1 pick-up roller, tray 1 feed roller, tray 1 separation roller ................................................................E-4

3.1.2 Replacing the tray 2 pick-up roller, tray 2 feed roller, tray 2 separation roller ................................................................E-4

3.1.3 Replacing the manual bypass tray pick-up roller, manual bypass tray feed roller, manual bypass tray separation roller

assy ................................................................................................................................................................................E-4

3.1.4 Replacing the toner cartridge .........................................................................................................................................E-6

3.1.5 Replacing the drum unit.................................................................................................................................................. E-7

3.1.6 Replacing the developing unit ........................................................................................................................................E-8

3.1.7 Replacing the waste toner box .......................................................................................................................................E-9

3.1.8 Replacing the transfer belt unit .....................................................................................................................................E-10

3.1.9 Replacing the transfer roller unit................................................................................................................................... E-11

3.1.10 Replacing the fusing unit ............................................................................................................................................ E-12

3.2 DF-632 ...................................................................................................................................................................................E-12

3.2.1 Replacing the paper feed assy .....................................................................................................................................E-13

3.2.2 Replacing the pick-up roller/feed roller ......................................................................................................................... E-13

3.2.3 Replacing the separation roller assy ............................................................................................................................E-15

3.3 DF-714 ...................................................................................................................................................................................E-16

3.3.1 Replacing the paper feed assy .....................................................................................................................................E-16

3.3.2 Replacing the pick-up roller/feed roller ......................................................................................................................... E-16

3.3.3 Replacing the separation roller assy ............................................................................................................................E-18

3.4 PC-116/PC-216 .....................................................................................................................................................................E-19

3.4.1 Replacing the tray 3 pick-up roller, feed roller, separation roller ..................................................................................E-19

3.4.2 Replacing the tray 4 pick-up roller, feed roller, separation roller ..................................................................................E-19

3.5 PC-416...................................................................................................................................................................................E-19

3.5.1 Replacing the pick-up roller, feed roller, separation roller ............................................................................................E-19

3.6 LU-302 ...................................................................................................................................................................................E-20

3.6.1 Replacing the pick-up roller .......................................................................................................................................... E-20

Page 4

3.6.2 Replacing the feed roller............................................................................................................................................... E-21

3.6.3 Replacing the separation roller .....................................................................................................................................E-21

3.7 FS-533 ...................................................................................................................................................................................E-22

3.7.1 Replacing the alignment roller assy F/R .......................................................................................................................E-22

3.8 FS-536/FS-536SD .................................................................................................................................................................E-23

3.8.1 Replacing the paddle (FS-536/FS-536SD) ...................................................................................................................E-23

3.8.2 Replacing the upper paddle (FS-536SD) .....................................................................................................................E-25

3.8.3 Replacing the lower paddle (FS-536SD) ...................................................................................................................... E-26

4. Cleaning parts list ...................................................................................................................................................E-27

4.1 bizhub C360i/C300i/C250i .....................................................................................................................................................E-27

4.2 DF-632 ...................................................................................................................................................................................E-27

4.3 DF-714 ...................................................................................................................................................................................E-27

4.4 PC-116/PC-216 .....................................................................................................................................................................E-28

4.5 PC-416...................................................................................................................................................................................E-28

4.6 LU-302 ...................................................................................................................................................................................E-28

4.7 FS-533 ...................................................................................................................................................................................E-28

4.8 FS-536/FS-536SD .................................................................................................................................................................E-28

5. Cleaning/Lubrication procedure..............................................................................................................................E-29

5.1 bizhub C360i/C300i/C250i .....................................................................................................................................................E-29

5.1.1 Cleaning the original glass ...........................................................................................................................................E-29

5.1.2 Cleaning the scanner rails ............................................................................................................................................E-29

5.1.3 Cleaning the mirror ....................................................................................................................................................... E-29

5.1.4 Cleaning the lens ..........................................................................................................................................................E-29

5.1.5 Cleaning the CCD sensor .............................................................................................................................................E-30

5.1.6 Cleaning the tray 1 pick-up roller, tray 1 feed roller, tray 1 separation roller ................................................................ E-30

5.1.7 Cleaning the tray 2 pick-up roller, tray 2 feed roller, tray 2 separation roller ................................................................ E-31

5.1.8 Cleaning the tray 2 transport roller ...............................................................................................................................E-31

5.1.9 Cleaning the bypass pick-up roller ...............................................................................................................................E-31

5.1.10 Cleaning the manual bypass tray feed roller .............................................................................................................. E-31

5.1.11 Cleaning the manual bypass tray separation roller ....................................................................................................E-31

5.1.12 Cleaning the transfer belt unit..................................................................................................................................... E-32

5.1.13 Cleaning the PH window ............................................................................................................................................E-32

5.1.14 Cleaning of the registration roller................................................................................................................................ E-32

5.1.15 Cleaning of the area around the waste toner collecting port ...................................................................................... E-32

5.1.16 Cleaning of the image transfer entrance guide........................................................................................................... E-33

5.1.17 Cleaning of the IDC sensor window ...........................................................................................................................E-33

5.1.18 Cleaning of the duplex transport rollers...................................................................................................................... E-33

5.1.19 Cleaning of the exit tray front roller............................................................................................................................. E-33

5.2 DF-632 ...................................................................................................................................................................................E-34

5.2.1 Cleaning of the pick-up roller/feed roller .......................................................................................................................E-34

5.2.2 Cleaning of the separation roller................................................................................................................................... E-34

5.2.3 Cleaning of the miscellaneous rollers ...........................................................................................................................E-34

5.2.4 Cleaning of the miscellaneous rolls .............................................................................................................................. E-35

5.2.5 Cleaning of the scanning guide ....................................................................................................................................E-36

5.2.6 Cleaning of the reflective sensor section ......................................................................................................................E-36

5.3 DF-714 ...................................................................................................................................................................................E-37

5.3.1 Cleaning of the pick-up roller/feed roller .......................................................................................................................E-37

5.3.2 Cleaning of the separation roller................................................................................................................................... E-37

5.3.3 Cleaning of the miscellaneous rollers ...........................................................................................................................E-38

5.3.4 Cleaning of the miscellaneous rolls .............................................................................................................................. E-39

5.3.5 Cleaning of the front side scanning guide ....................................................................................................................E-40

5.3.6 Cleaning of the reflective sensor section ......................................................................................................................E-41

5.3.7 Back side scanning glass .............................................................................................................................................E-41

5.3.8 Back side scanning guide/Back side scanning shading shaft ......................................................................................E-42

5.4 PC-116/PC-216 .....................................................................................................................................................................E-42

5.4.1 Tray 3 pick-up roller, feed roller, separation roller ........................................................................................................ E-42

5.4.2 Tray 4 pick-up roller, feed roller, separation roller ........................................................................................................ E-42

5.4.3 Tray 3 vertical transport roller, tray 4 vertical transport roller .......................................................................................E-42

5.5 PC-416...................................................................................................................................................................................E-43

5.5.1 Pick-up roller, feed roller, separation roller ...................................................................................................................E-43

5.5.2 Vertical transport roller .................................................................................................................................................E-43

5.6 LU-302 ...................................................................................................................................................................................E-43

5.6.1 Pick-up roller................................................................................................................................................................. E-43

5.6.2 Feed roller ....................................................................................................................................................................E-44

5.6.3 Separation roller ...........................................................................................................................................................E-44

5.6.4 Conveyance roller......................................................................................................................................................... E-44

5.7 FS-533 ...................................................................................................................................................................................E-44

iii

Page 5

5.7.1 Cleaning procedure for each parts ...............................................................................................................................E-45

5.7.2 Cleaning the paper exit paddle .....................................................................................................................................E-45

5.8 FS-536/FS-536SD .................................................................................................................................................................E-45

5.8.1 Cleaning procedure for each rollers/each rolls (FS-536/FS-536SD) ............................................................................ E-45

5.8.2 Cleaning the paddle (FS-536/FS-536SD)..................................................................................................................... E-46

5.8.3 Cleaning the upper paddle (FS-536SD) .......................................................................................................................E-46

5.8.4 Cleaning the lower paddle (FS-536SD) ........................................................................................................................E-47

5.8.5 FNS entrance sensor (PS4) (FS-536SD/FS-536) ........................................................................................................E-47

5.8.6 Main tray exit sensor (PS16) (FS-536SD/FS-536) .......................................................................................................E-47

F DISASSEMBLY/REASSEMBLY ..................................................................................................... F-1

1. Disassembly/adjustment prohibited items ................................................................................................................ F-1

1.1 Paint-locked screws .................................................................................................................................................................F-1

1.2 Red-painted screws ................................................................................................................................................................. F-1

1.3 Variable resistors on board ......................................................................................................................................................F-1

1.4 Warnings for disassembly........................................................................................................................................................ F-1

1.5 Warnings / Precautions during setup or transportation............................................................................................................ F-2

2. Units from which removing is prohibited ...................................................................................................................F-3

2.1 CCD unit ..................................................................................................................................................................................F-3

2.1.1 Reason for prohibition .................................................................................................................................................... F-3

2.2 PH unit ..................................................................................................................................................................................... F-3

2.2.1 Reason for prohibition .................................................................................................................................................... F-3

2.3 Fusing unit ...............................................................................................................................................................................F-3

2.3.1 Reason for prohibition .................................................................................................................................................... F-3

3. Disassembly/assembly warning/caution items ......................................................................................................... F-4

3.1 Removal/installing of PWBs..................................................................................................................................................... F-4

4. Notes when transporting the machine ......................................................................................................................F-5

4.1 Protective materials .................................................................................................................................................................F-5

4.1.1 Protective materials for the photoconductors .................................................................................................................F-5

4.1.2 Scanner packing bracket ................................................................................................................................................ F-5

4.1.3 Paper tray locking materials ...........................................................................................................................................F-6

4.1.4 Transfer roller locking materials ..................................................................................................................................... F-6

5. bizhub C360i/C300i/C250i ........................................................................................................................................F-7

5.1 Exterior parts ...........................................................................................................................................................................F-7

5.1.1 Scanner right cover ........................................................................................................................................................ F-7

5.1.2 Scanner left cover........................................................................................................................................................... F-7

5.1.3 Scanner front cover ........................................................................................................................................................F-7

5.1.4 Scanner upper rear cover ...............................................................................................................................................F-8

5.1.5 Control panel upper cover ..............................................................................................................................................F-8

5.1.6 Control panel front cover ................................................................................................................................................F-8

5.1.7 Control panel right cover ................................................................................................................................................ F-9

5.1.8 Control panel left cover/1.............................................................................................................................................. F-10

5.1.9 Control panel left cover/2.............................................................................................................................................. F-10

5.1.10 Control panel unit ....................................................................................................................................................... F-11

5.1.11 Original glass.............................................................................................................................................................. F-12

5.1.12 Front door ................................................................................................................................................................... F-13

5.1.13 Front lower cover........................................................................................................................................................ F-13

5.1.14 Front cover ................................................................................................................................................................. F-14

5.1.15 Left cover.................................................................................................................................................................... F-14

5.1.16 Exit tray....................................................................................................................................................................... F-14

5.1.17 Rear right cover .......................................................................................................................................................... F-15

5.1.18 DF cable cover ........................................................................................................................................................... F-16

5.1.19 Upper rear cover......................................................................................................................................................... F-16

5.1.20 Lower rear cover......................................................................................................................................................... F-16

5.1.21 Tray 1 ......................................................................................................................................................................... F-17

5.1.22 Tray 2 ......................................................................................................................................................................... F-17

5.2 Units....................................................................................................................................................................................... F-18

5.2.1 Waste toner transport unit/waste toner box .................................................................................................................. F-18

5.2.2 LED exposure unit ........................................................................................................................................................ F-18

5.2.3 CCD unit ....................................................................................................................................................................... F-19

5.2.4 Paper feed unit .............................................................................................................................................................F-21

5.2.5 PH unit ..........................................................................................................................................................................F-21

5.2.6 Sub hopper unit ............................................................................................................................................................F-23

5.2.7 Right door unit ..............................................................................................................................................................F-24

5.2.8 Manual bypass tray unit................................................................................................................................................ F-25

Page 6

5.2.9 Regist unit..................................................................................................................................................................... F-27

5.2.10 How to open the PWB box ......................................................................................................................................... F-28

5.2.11 Main drive unit ............................................................................................................................................................ F-29

5.2.12 Transport unit ............................................................................................................................................................. F-31

5.2.13 Fusing drive unit ......................................................................................................................................................... F-31

5.2.14 Hopper drive unit ........................................................................................................................................................ F-34

5.3 Boards ...................................................................................................................................................................................F-35

5.3.1 Scanner drive board (SCDB) ........................................................................................................................................ F-35

5.3.2 Base board (BASEB) ....................................................................................................................................................F-35

5.3.3 Storage board (STRGB) ............................................................................................................................................... F-37

5.3.4 CPU board (CPUB) ...................................................................................................................................................... F-37

5.3.5 Backup board (ERB)..................................................................................................................................................... F-39

5.3.6 Expansion control board (EXCB).................................................................................................................................. F-40

5.3.7 TPM board (TPMB) ...................................................................................................................................................... F-41

5.3.8 Machine condition monitor board (MCMB) ................................................................................................................... F-41

5.3.9 Tray 1 FD paper size board (FDPSB/1), tray 2 FD paper size board (FDPSB/2) ........................................................ F-41

5.3.10 Tray 1 CD paper size board (CDPSB/1), tray 2 CD paper size board (CDPSB/2)..................................................... F-42

5.3.11 Tray 1 paper empty indicator board (PEIB/1), tray 2 paper empty indicator board (PEIB/2)...................................... F-43

5.3.12 High voltage unit (HV) ................................................................................................................................................ F-43

5.3.13 DC power supply (DCPU)........................................................................................................................................... F-44

5.4 Motors ....................................................................................................................................................................................F-45

5.4.1 Transport motor (M1).................................................................................................................................................... F-45

5.4.2 PC motor (M2) .............................................................................................................................................................. F-46

5.4.3 Fusing motor (M3) ........................................................................................................................................................F-46

5.4.4 Paper exit/reverse motor (M4) ...................................................................................................................................... F-46

5.4.5 ADU transport motor (M5) ............................................................................................................................................F-47

5.4.6 Toner supply motor/K (M6) ........................................................................................................................................... F-48

5.4.7 Toner supply motor/C (M7)........................................................................................................................................... F-49

5.4.8 Toner supply motor/M (M8) ..........................................................................................................................................F-49

5.4.9 Toner supply motor/Y (M9) ........................................................................................................................................... F-50

5.4.10 Toner cartridge motor/YM (M10) ................................................................................................................................ F-51

5.4.11 Fusing pressure motor (M11) ..................................................................................................................................... F-52

5.4.12 Tray 1 lift-up motor (M12) ........................................................................................................................................... F-52

5.4.13 Tray 2 lift-up motor (M13) ........................................................................................................................................... F-52

5.4.14 Waste toner transport motor (M20) ............................................................................................................................ F-53

5.4.15 Developing motor (M21) ............................................................................................................................................. F-54

5.4.16 Toner cartridge motor/CK (M25)................................................................................................................................. F-54

5.4.17 Scanner motor (M201)................................................................................................................................................ F-55

5.5 Clutches .................................................................................................................................................................................F-56

5.5.1 Tray 2 paper feed clutch (CL1) ..................................................................................................................................... F-56

5.5.2 Tray 2 vertical transport clutch (CL2) ........................................................................................................................... F-57

5.5.3 Tray 1 paper feed clutch (CL3) ..................................................................................................................................... F-58

5.5.4 Registration clutch (CL4) .............................................................................................................................................. F-58

5.5.5 1st transfer pressure clutch (CL5) ................................................................................................................................F-58

5.5.6 ADU transport clutch (CL6) .......................................................................................................................................... F-59

5.5.7 Bypass tray paper feed clutch (CL7) ............................................................................................................................F-60

5.5.8 Paper feed roller fast clutch (CL10) .............................................................................................................................. F-61

5.6 Fans .......................................................................................................................................................................................F-61

5.6.1 PH/power supply cooling fan (FM1) ............................................................................................................................. F-61

5.6.2 Transfer belt cleaner cooling fan (FM2)........................................................................................................................ F-62

5.6.3 Rear side cooling fan (FM3) .........................................................................................................................................F-64

5.6.4 Toner cartridge cooling fan (FM4) ................................................................................................................................F-64

5.6.5 Paper cooling fan (FM8) ............................................................................................................................................... F-65

5.7 Others .................................................................................................................................................................................... F-65

5.7.1 Bypass tray lift-up solenoid (SD1) ................................................................................................................................F-65

5.7.2 Exit path switch solenoid (SD3) .................................................................................................................................... F-67

5.7.3 Developing solenoid (SD4) ........................................................................................................................................... F-69

5.7.4 Bypass tray pick-up roller solenoid (SD6) .................................................................................................................... F-69

5.7.5 FAX speaker (SP1)....................................................................................................................................................... F-70

5.7.6 Bypass tray CD paper size VR (VR1)........................................................................................................................... F-71

5.7.7 Deodorant filter ............................................................................................................................................................. F-73

6. DF-632/SP-501....................................................................................................................................................... F-75

6.1 Front cover (DF-632) .............................................................................................................................................................F-75

6.2 Rear cover (DF-632) ..............................................................................................................................................................F-75

6.3 Left cover unit (DF-632) .........................................................................................................................................................F-75

6.4 Reverse automatic document feeder (DF-632) .....................................................................................................................F-77

6.5 Glass cleaning roller unit (DF-632) ........................................................................................................................................ F-78

Page 7

6.6 DF control board (DFCB) (DF-632) .......................................................................................................................................F-79

6.7 Document width size sensor (VR1) (DF-632) ........................................................................................................................ F-79

6.8 Document reading motor (M1) (DF-632) ...............................................................................................................................F-80

6.9 Document feed motor (M2) (DF-632) ....................................................................................................................................F-81

6.10 Registration motor (M3) (DF-632) ....................................................................................................................................... F-81

6.11 Glass cleaning motor (M4) (DF-632) ................................................................................................................................... F-82

6.12 Reading roll release motor (M5) (DF-632)........................................................................................................................... F-82

6.13 Document exit roller release solenoid (SD1) (DF-632)........................................................................................................ F-83

6.14 Stamp unit (SP-501) ............................................................................................................................................................ F-84

6.15 Stamp (SP-501) ................................................................................................................................................................... F-85

7. DF-714/SP-501....................................................................................................................................................... F-87

7.1 Front cover (DF-714) .............................................................................................................................................................F-87

7.2 Rear cover (DF-714) ..............................................................................................................................................................F-87

7.3 Left cover unit (DF-714) .........................................................................................................................................................F-87

7.4 Dual scan document feeder (DF-714) ...................................................................................................................................F-89

7.5 Front side glass cleaning roller unit (DF-714) ........................................................................................................................F-90

7.6 Back side glass cleaning roller unit (DF-714) ........................................................................................................................F-91

7.7 CIS module (CIS) (DF-714) ...................................................................................................................................................F-93

7.8 DF control board (DFCB) (DF-714) .......................................................................................................................................F-95

7.9 Document width size sensor (VR1) (DF-714) ........................................................................................................................ F-95

7.10 CIS power supply (CISPU) (DF-714)................................................................................................................................... F-96

7.11 Document reading motor (M1) (DF-714) .............................................................................................................................F-97

7.12 Document feed motor (M2) (DF-714) ..................................................................................................................................F-98

7.13 Registration motor (M3) (DF-714) ....................................................................................................................................... F-99

7.14 Reading roll release motor (M4) (DF-714)........................................................................................................................... F-99

7.15 CIS cleaning motor (M5) (DF-714) ....................................................................................................................................F-100

7.16 Document reading glass cleaning motor (M6) (DF-714) ................................................................................................... F-101

7.17 DF cooling fan motor (FM1) (DF-714) ...............................................................................................................................F-101

7.18 CIS cable (DF-714)............................................................................................................................................................ F-101

7.19 Stamp unit (SP-501) .......................................................................................................................................................... F-102

7.20 Stamp (SP-501) ................................................................................................................................................................. F-103

7.21 Multi feed receiver board (MFRB) (DF-714) ...................................................................................................................... F-104

7.22 Multi feed detection board/TX (MFDB/TX) ........................................................................................................................ F-104

7.23 Multi feed detection board/RX (MFDB/RX)........................................................................................................................ F-105

8. PC-116/PC-216 .................................................................................................................................................... F-106

8.1 Right door (PC-116/PC-216) ...............................................................................................................................................F-106

8.2 Rear right cover (PC-116/PC-216) ......................................................................................................................................F-106

8.3 Rear cover (PC-116/PC-216) ..............................................................................................................................................F-106

8.4 Tray 3, tray 4 (PC-116/PC-216) ...........................................................................................................................................F-106

8.5 Paper feed cabinet (PC-116/PC-216)..................................................................................................................................F-107

8.6 Tray 3 paper feed unit (PC-116/PC-216) .............................................................................................................................F-108

8.7 Tray 4 paper feed unit (PC-216) .......................................................................................................................................... F-109

8.8 PC control board (PCCB) (PC-116/PC-216)........................................................................................................................ F-109

8.9 Tray 3 paper empty indicator board (PEIB/3), tray 4 paper empty indicator board (PEIB/4) (PC-116/PC-216) .................. F-110

8.10 Tray 3 FD paper size board (FDPSB/3), tray 4 FD paper size board (FDPSB/4) (PC-116/PC-216)................................. F-110

8.11 Tray 3 CD paper size board (CDPSB/3) (PC-116/PC-216) ............................................................................................... F-111

8.12 Tray 4 CD paper size board (CDPSB/4) (PC-216) ............................................................................................................ F-112

8.13 Tray 3 paper feed motor (M111), tray 4 paper feed motor (M121) (PC-116/PC-216) ....................................................... F-112

8.14 Tray 3 vertical transport motor (M112), tray 4 vertical transport motor (M122) (PC-116/PC-216) ....................................F-113

8.15 Tray 3 lift-up motor (M113), tray 4 lift-up motor (M123) (PC-116/PC-216) ........................................................................ F-113

9. PC-416 .................................................................................................................................................................F-115

9.1 Right door (PC-416)............................................................................................................................................................. F-115

9.2 Rear right cover (PC-416).................................................................................................................................................... F-115

9.3 Rear cover (PC-416)............................................................................................................................................................ F-115

9.4 Paper feed tray (PC-416)..................................................................................................................................................... F-115

9.5 Paper feed cabinet (PC-416) ............................................................................................................................................... F-116

9.6 Paper feed unit (PC-416) .....................................................................................................................................................F-117

9.7 PC control board (PCCB) (PC-416) .....................................................................................................................................F-118

9.8 Tray 3 paper empty indicator board (PEIB/3) (PC-416)....................................................................................................... F-118

9.9 Paper feed motor (M131) (PC-416) ..................................................................................................................................... F-118

9.10 Vertical transport motor (M132) (PC-416) .........................................................................................................................F-119

9.11 Elevator motor (M134) (PC-416) .......................................................................................................................................F-119

9.12 Shifter motor (M133) (PC-416) .......................................................................................................................................... F-119

9.13 Wire (PC-416).................................................................................................................................................................... F-120

10. LU-302 ................................................................................................................................................................F-123

10.1 Right cover (LU-302) .........................................................................................................................................................F-123

Page 8

10.2 Front cover (LU-302) .........................................................................................................................................................F-123

10.3 Rear cover (LU-302) .......................................................................................................................................................... F-123

10.4 Feed cover (LU-302) ......................................................................................................................................................... F-124

10.5 Upper door (LU-302) ......................................................................................................................................................... F-124

10.6 Large capacity unit (LU-302) .............................................................................................................................................F-125

10.7 LU drive board (LUDB) (LU-302) ....................................................................................................................................... F-126

10.8 LU lift-up motor (M1) (LU-302) .......................................................................................................................................... F-126

10.9 Dehumidification heater (DH) (LU-302) ............................................................................................................................. F-126

10.10 Lift wire (LU-302) ............................................................................................................................................................. F-127

10.10.1 Removal ................................................................................................................................................................. F-127

10.10.2 Mounting................................................................................................................................................................. F-130

11. JS-506.................................................................................................................................................................F-136

11.1 Exit tray 1 (JS-506) ............................................................................................................................................................ F-136

11.2 Exit tray 2 (JS-506) ............................................................................................................................................................ F-136

11.3 Job separator (JS-506) ...................................................................................................................................................... F-137

11.4 Sensor unit (JS-506).......................................................................................................................................................... F-137

11.5 JS control board (JSCB) (JS-506) ..................................................................................................................................... F-137

11.6 Tray shift motor (M1) (JS-506) .......................................................................................................................................... F-138

12. FS-533 ................................................................................................................................................................F-139

12.1 Front cover (FS-533) .........................................................................................................................................................F-139

12.2 Rear cover (FS-533) .......................................................................................................................................................... F-139

12.3 Upper cover (FS-533) ........................................................................................................................................................ F-139

12.4 Finisher (FS-533)............................................................................................................................................................... F-140

12.5 Stapler unit (FS-533) .........................................................................................................................................................F-141

12.6 Paper exit tray unit (FS-533) ............................................................................................................................................. F-142

12.7 FS control board (FSCB) (FS-533) .................................................................................................................................... F-142

12.8 Stapler relay board (STRYB) (FS-533).............................................................................................................................. F-142

12.9 Paper conveyance motor (M101) (FS-533) ....................................................................................................................... F-143

12.10 Paper exit motor (M102) (FS-533)................................................................................................................................... F-143

12.11 Alignment roller motor (M103) (FS-533).......................................................................................................................... F-144

12.12 Exit roller lift up motor (M104) (FS-533) .......................................................................................................................... F-144

12.13 Alignment motor/Fr (M105), Alignment motor/Rr (M106) (FS-533) ................................................................................. F-144

12.14 Stapler movement motor (M107) (FS-533)...................................................................................................................... F-145

12.15 Tray lift up motor (M109) (FS-533) .................................................................................................................................. F-146

12.16 Paper surface detect solenoid (SD101) (FS-533) ........................................................................................................... F-147

12.17 Batch solenoid (SD102) (FS-533) ................................................................................................................................... F-148

12.18 Paper exit roller solenoid (SD103) (FS-533) ................................................................................................................... F-149

12.19 Paper exit paddle (FS-533) ............................................................................................................................................. F-149

13. PK-519 ................................................................................................................................................................F-150

13.1 Punch kit (PK-519) ............................................................................................................................................................ F-150

13.2 PK control board (PKCB) (PK-519) ...................................................................................................................................F-150

13.3 Punch motor (M201) (PK-519) .......................................................................................................................................... F-151

14. RU-513................................................................................................................................................................F-152

14.1 RU transport unit (RU-513)................................................................................................................................................ F-152

14.2 Sensor unit (RU-513)......................................................................................................................................................... F-152

14.3 RU transport motor (M1) (RU-513) .................................................................................................................................... F-152

15. FS-536/FS-536SD ..............................................................................................................................................F-154

15.1 Rear cover (FS-536/FS-536SD) ........................................................................................................................................ F-154

15.2 Front door (FS-536/FS-536SD) ......................................................................................................................................... F-154

15.3 Front upper cover (FS-536/FS-536SD) .............................................................................................................................F-154

15.4 Left lower cover (FS-536/FS-536SD) ................................................................................................................................F-154

15.5 Front lower cover (FS-536/FS-536SD) .............................................................................................................................. F-155

15.6 Finisher (FS-536/FS-536SD) ............................................................................................................................................. F-155

15.7 Stapler unit (FS-536/FS-536SD) ....................................................................................................................................... F-156

15.8 FS control board (FSCB) (FS-536/FS-536SD) .................................................................................................................. F-159

15.9 FNS entry transport motor (M2) (FS-536/FS-536SD)........................................................................................................ F-160

15.10 FNS discharge motor (M3) (FS-536/FS-536SD) ............................................................................................................. F-160

15.11 Receiving roller retraction motor (M4) (FS-536/FS-536SD) ............................................................................................ F-160

15.12 FNS paddle motor (M5) (FS-536/FS-536SD) .................................................................................................................. F-161

15.13 Trailing edge stopper motor (M6) (FS-536/FS-536SD) ................................................................................................... F-161

15.14 Alignment motor/Fr (M7) (FS-536/FS-536SD)................................................................................................................. F-161

15.15 Alignment motor/Rr (M8) (FS-536/FS-536SD) ................................................................................................................ F-162

15.16 Pre-eject drive motor (M9) (FS-536/FS-536SD).............................................................................................................. F-162

15.17 Bundle eject motor (M10) (FS-536/FS-536SD) ............................................................................................................... F-164

15.18 Main tray up/down motor (M11) (FS-536/FS-536SD)...................................................................................................... F-166

vii

Page 9

15.19 Paper receiving control motor (M12) (FS-536/FS-536SD) .............................................................................................. F-166

15.20 Side stapler movement motor (M13) (FS-536/FS-536SD) .............................................................................................. F-167

16. FS-536SD saddle section ...................................................................................................................................F-168

16.1 Saddle unit (FS-536SD) .................................................................................................................................................... F-168

16.2 Front cover (FS-536SD saddle section) ............................................................................................................................F-170

16.3 Exit tray (FS-536SD saddle section) ................................................................................................................................. F-170

16.4 Staple unit (FS-536SD saddle section) ............................................................................................................................. F-171

16.5 SD control board (SDCB) (FS-536SD saddle section) ...................................................................................................... F-173

16.6 SD transport motor (M1) (FS-536SD saddle section)........................................................................................................ F-174

16.7 Paper discharge control motor (M2) (FS-536SD saddle section) ...................................................................................... F-174

16.8 Alignment motor (M3) (FS-536SD saddle section) ............................................................................................................ F-174

16.9 Stopper drive motor (M4) (FS-536SD saddle section) ...................................................................................................... F-175

16.10 Center fold roller motor (M5) (FS-536SD saddle section) ............................................................................................... F-175

16.11 Center fold guide motor (M6) (FS-536SD saddle section) .............................................................................................. F-176

16.12 SD paddle motor (M7) (FS-536SD saddle section) ......................................................................................................... F-176

16.13 Tri-folding guide motor (M8) (FS-536SD saddle section) ................................................................................................ F-177

16.14 Center fold knife motor (M9) (FS-536SD saddle section)................................................................................................ F-177

16.15 Stopper solenoid (SD1) (FS-536SD saddle section) ....................................................................................................... F-178

17. PK-520 ................................................................................................................................................................F-182

17.1 Punch kit (PK-520) ............................................................................................................................................................ F-182

18. SC-509 ................................................................................................................................................................F-183

18.1 DSC board/1 (SC-509) ......................................................................................................................................................F-183

19. FK-514 ................................................................................................................................................................F-184

19.1 FAX Kit (Line1), FAX Kit (Line2) (FK-514)......................................................................................................................... F-184

19.2 FAX Kit (Line1), FAX Kit (Line2) (FK-514) (with MK-742) .................................................................................................F-185

20. FK-515 ................................................................................................................................................................F-188

20.1 FAX board (line 3), FAX board (line 4) (FK-515) ............................................................................................................... F-188

21. UK-221 ................................................................................................................................................................F-189

21.1 Upgrade kit (UK-221)......................................................................................................................................................... F-189

22. KP-102 ................................................................................................................................................................F-190

22.1 Keypad (KP-102) ............................................................................................................................................................... F-190

23. VI-516 .................................................................................................................................................................F-191

23.1 Video Interface Kit (VI-516) ...............................................................................................................................................F-191

24. UK-115 ................................................................................................................................................................F-192

24.1 Upgrade kit (UK-115)......................................................................................................................................................... F-192

25. CU-102................................................................................................................................................................F-193

25.1 Clean unit (CU-102)........................................................................................................................................................... F-193

25.2 Clean unit drive board (CUDB) .......................................................................................................................................... F-193

25.3 Exhaust fan/1 (FM14) ........................................................................................................................................................ F-194

25.4 Exhaust fan/2 (FM15) ........................................................................................................................................................ F-194

26. COMMERCIALLY AVAILABLE PARTS..............................................................................................................F-196

26.1 Installing the key counter ................................................................................................................................................... F-196

26.1.1 Configuration ............................................................................................................................................................ F-196

26.1.2 Procedure ................................................................................................................................................................. F-196

26.2 Installing the original size sensor/2 (Option)...................................................................................................................... F-196

G MECHANICAL ADJUSTMENT...................................................................................................... G-1

1. Advance checks .......................................................................................................................................................G-1

2. bizhub C360i/C300i/C250i ........................................................................................................................................G-2

2.1 Skew Adj. ................................................................................................................................................................................ G-2

2.1.1 Confirmation procedure ................................................................................................................................................. G-2

2.1.2 Adjustment procedure ................................................................................................................................................... G-2

2.2 Centering adjustment of the tray 1/2....................................................................................................................................... G-3

2.3 Adjusting the parallelism of the fusing unit path ..................................................................................................................... G-4

2.4 PH skew adjustment ............................................................................................................................................................... G-5

3. DF-632......................................................................................................................................................................G-7

3.1 Adjusting the height ................................................................................................................................................................ G-7

3.2 Adjusting front side skew feed on ADF................................................................................................................................... G-7

3.3 Adjusting the pressure of the separation roller ....................................................................................................................... G-8

4. DF-714....................................................................................................................................................................G-10

viii

Page 10

4.1 Adjusting the height .............................................................................................................................................................. G-10

4.2 Adjusting front side skew feed on ADF................................................................................................................................. G-10

4.3 Adjusting back side skew feed on ADF ................................................................................................................................ G-11

4.4 Adjusting the pressure of the separation roller ..................................................................................................................... G-12

5. PC-116/PC-216 ......................................................................................................................................................G-14

5.1 Paper reference position....................................................................................................................................................... G-14

6. PC-416 ...................................................................................................................................................................G-15

6.1 Paper reference position....................................................................................................................................................... G-15

6.2 Shifter movement timing belt adjustment.............................................................................................................................. G-15

7. LU-302 ....................................................................................................................................................................G-17

7.1 Centering adjustment of the LCT .......................................................................................................................................... G-17

7.2 Pick-up roller load adjustment of the LCT............................................................................................................................. G-17

8. PK-519....................................................................................................................................................................G-19

8.1 Punch hole deviation correction............................................................................................................................................ G-19

9. PK-520....................................................................................................................................................................G-20

9.1 Punch hole deviation correction............................................................................................................................................ G-20

10. FS-536SD saddle section ....................................................................................................................................G-22

10.1 Half-fold skew adjustment .................................................................................................................................................. G-22

H UTILITY MODE ..............................................................................................................................H-1

1. Outline ......................................................................................................................................................................H-1

2. Accessibility ..............................................................................................................................................................H-2

3. Counter .....................................................................................................................................................................H-3

4. Utility .........................................................................................................................................................................H-4

4.1 Information .............................................................................................................................................................................. H-4

4.2 System Settings ...................................................................................................................................................................... H-4

4.3 Box.......................................................................................................................................................................................... H-5

4.4 Copier Settings ....................................................................................................................................................................... H-5

4.5 Printer Settings ....................................................................................................................................................................... H-6

4.6 Store Address ......................................................................................................................................................................... H-7

4.7 Scan/Fax Settings................................................................................................................................................................... H-8

4.8 Fax Settings ............................................................................................................................................................................ H-8

4.9 Customize ............................................................................................................................................................................... H-8

5. Language Selection ................................................................................................................................................H-10

6. Administrator ..........................................................................................................................................................H-11

6.1 Outline .................................................................................................................................................................................. H-11

6.2 Maintenance ......................................................................................................................................................................... H-11

6.3 System Settings .................................................................................................................................................................... H-12

6.3.1 Machine Setting ............................................................................................................................................................H-12

6.3.2 Register Support Information........................................................................................................................................H-12

6.3.3 Reset Settings ..............................................................................................................................................................H-12

6.3.4 User Box Settings .........................................................................................................................................................H-12

6.3.5 URL Document Management Setting ...........................................................................................................................H-13

6.3.6 Standard Size Setting ...................................................................................................................................................H-13

6.3.7 Stamp Settings .............................................................................................................................................................H-13

6.3.8 Blank Page Print Settings .............................................................................................................................................H-13

6.3.9 Job Priority Operation Settings .....................................................................................................................................H-13

6.3.10 System Connection Setting ........................................................................................................................................H-13

6.3.11 Searchable PDF Settings ...........................................................................................................................................H-13

6.3.12 Compact PDF Settings ...............................................................................................................................................H-14

6.3.13 Outline PDF Setting.................................................................................................................................................... H-14

6.3.14 PDF Web Optimization Default Settings.....................................................................................................................H-14

6.3.15 PDF/A Default Settings...............................................................................................................................................H-14

6.3.16 Scan File Name Settings ............................................................................................................................................H-14

6.3.17 Set Paper Name by User............................................................................................................................................H-14

6.3.18 Enlarge Display Settings ............................................................................................................................................H-14

6.3.19 Registered Key Settings .............................................................................................................................................H-14

6.3.20 Main Menu Display Settings .......................................................................................................................................H-14

6.3.21 Preview Settings......................................................................................................................................................... H-14

6.3.22 List/Counter ................................................................................................................................................................H-14

6.3.23 Custom Function Pattern Selection ............................................................................................................................H-15

6.3.24 Custom Function Profile User/Account.......................................................................................................................H-15

Page 11

6.3.25 Function Display Key Permission Setting................................................................................................................... H-15

6.3.26 Temporary Change Language....................................................................................................................................H-15

6.3.27 Main Menu Default (Classic Style) .............................................................................................................................H-15

6.3.28 Main Menu Default (Basic Style) ................................................................................................................................ H-15

6.3.29 Display 10 Keypad when entering Number of Sets ....................................................................................................H-15

6.3.30 Print end notification lamp ON time settings...............................................................................................................H-15

6.3.31 Universal Print Settings .............................................................................................................................................. H-15

6.3.32 Widget Function Settings............................................................................................................................................H-16

6.3.33 Bypass Tray Overwrite Settings for Print PC..............................................................................................................H-16

6.3.34 Network Selection Settings.........................................................................................................................................H-16

6.3.35 Job History Display Setting.........................................................................................................................................H-16

6.3.36 Default Bypass Paper Type Setting............................................................................................................................H-16

6.3.37 Page Number Print Position .......................................................................................................................................H-16

6.3.38 Voice Guidance Settings ............................................................................................................................................H-16

6.3.39 ADF original skew adj.setting ..................................................................................................................................... H-16

6.3.40 Def. operation mode set. ............................................................................................................................................H-16

6.4 Security ................................................................................................................................................................................. H-16

6.5 User Auth/Account Track ...................................................................................................................................................... H-18

6.6 Network................................................................................................................................................................................. H-20

6.7 Box........................................................................................................................................................................................ H-23

6.8 Printer Settings ..................................................................................................................................................................... H-23

6.9 Store Address ....................................................................................................................................................................... H-24

6.10 Fax Settings.........................................................................................................................................................................H-24

6.10.1 Header/Footer Position...............................................................................................................................................H-24

6.10.2 Line Parameter Setting............................................................................................................................................... H-24

6.10.3 TX/RX Settings ...........................................................................................................................................................H-25

6.10.4 Function Setting..........................................................................................................................................................H-25

6.10.5 Report Settings........................................................................................................................................................... H-26

6.10.6 Multi Line Settings ......................................................................................................................................................H-26

6.10.7 Network Fax Setting ...................................................................................................................................................H-27

6.10.8 Header Information..................................................................................................................................................... H-27

6.10.9 Fax Print Quality Settings ...........................................................................................................................................H-27

6.10.10 Fax Setting List......................................................................................................................................................... H-27

6.11 Copier Settings ....................................................................................................................................................................H-27

7. Expert Adjustment ..................................................................................................................................................H-28

8. Storage Management .............................................................................................................................................H-30

9. Banner Printing .......................................................................................................................................................H-31

10. Device Information ............................................................................................................................................... H-32

11. Remote Panel ...................................................................................................................................................... H-33

12. Card Authentication ............................................................................................................................................. H-34

13. Supplementary explanation of utility mode .......................................................................................................... H-35

13.1 MAINTENANCE ..................................................................................................................................................................H-35

13.1.1 License Settings .........................................................................................................................................................H-35

13.1.2 External Memory Backup ...........................................................................................................................................H-35

13.1.3 Remote Access Setting ..............................................................................................................................................H-36

13.2 System Settings...................................................................................................................................................................H-36

13.2.1 Voice Guidance Settings ............................................................................................................................................H-36

13.3 Security................................................................................................................................................................................H-36

13.3.1 ProhibitFunctions........................................................................................................................................................ H-36

13.3.2 Enhanced Security Mode ...........................................................................................................................................H-37

13.3.3 Image Log Transfer Settings ......................................................................................................................................H-39

13.3.4 Driver Password Encryption Setting ...........................................................................................................................H-39

13.3.5 Quick Security Setting ................................................................................................................................................H-40

13.4 User Authentication/Account Track .....................................................................................................................................H-41

13.4.1 Authentication Device Settings................................................................................................................................... H-41

13.5 Network ...............................................................................................................................................................................H-42

13.5.1 Network Fax Setting ...................................................................................................................................................H-42

13.5.2 IWS Settings............................................................................................................................................................... H-43

13.5.3 Remote Panel Settings............................................................................................................................................... H-43

13.5.4 Network I/F Configuration........................................................................................................................................... H-44

13.5.5 Wireless Network Setting ...........................................................................................................................................H-45

13.6 Machine Update Settings ....................................................................................................................................................H-46

13.6.1 Internet ISW Settings..................................................................................................................................................H-46

13.6.2 Machine Auto Update Settings ...................................................................................................................................H-46

Page 12

13.6.3 HTTP Proxy Settings ..................................................................................................................................................H-49

13.7 Storage Management ..........................................................................................................................................................H-49

13.7.1 Debug Log Encryption Settings ..................................................................................................................................H-49

I SERVICE MODE ............................................................................................................................. I-1

1. Outline ....................................................................................................................................................................... I-1

2. SETUP WIZARD ....................................................................................................................................................... I-2

3. Time Zone/Date & Time Input mode ......................................................................................................................... I-3

4. Search ....................................................................................................................................................................... I-4

5. Machine ..................................................................................................................................................................... I-5

5.1 Fusing Temperature ................................................................................................................................................................. I-5

5.2 Fusing Transport Speed ...........................................................................................................................................................I-5

5.3 Heater Control Level ................................................................................................................................................................. I-5

5.4 Printer Area............................................................................................................................................................................... I-6

5.4.1 Leading Edge Adjustment ............................................................................................................................................... I-6

5.4.2 Printer Image Centering Side 1 ....................................................................................................................................... I-6

5.4.3 Leading Edge Adj. Side 2 (Duplex) ................................................................................................................................. I-6

5.4.4 Prt. Image Center. Side 2 (Dup) ...................................................................................................................................... I-7

5.4.5 Paper Feed Direction Adj. ............................................................................................................................................... I-7

5.4.6 Tray Printing Position: Tip ............................................................................................................................................... I-8

5.5 Scan Area ................................................................................................................................................................................. I-8

5.5.1 Test chart......................................................................................................................................................................... I-8

5.5.2 Image Position: Leading Edge......................................................................................................................................... I-9

5.5.3 Scanner Image Side Edge............................................................................................................................................... I-9

5.5.4 Main Scan Zoom Adj. .................................................................................................................................................... I-10

5.5.5 Sub Scan Zoom Adj....................................................................................................................................................... I-10

5.6 Printer Reg. Loop Adj. ............................................................................................................................................................ I-10

5.7 Color Registration Adjustment ................................................................................................................................................ I-11

5.8 Print Head Skew Adj. .............................................................................................................................................................. I-11

5.9 LD adjustment......................................................................................................................................................................... I-12

5.9.1 LD Light Width Adjustment ............................................................................................................................................ I-12

5.10 Manual Bypass Tray Width Adj ............................................................................................................................................ I-12

5.11 Lead Edge Erase Adjustment ............................................................................................................................................... I-12

5.12 Non-Image Area Erase Check.............................................................................................................................................. I-13

5.13 Split Line Prior Detection ...................................................................................................................................................... I-13

5.14 PPM Control Choice ............................................................................................................................................................. I-13

5.15 Move Scanner to Home ........................................................................................................................................................ I-13

6. Firmware Version .................................................................................................................................................... I-14

7. Imaging Process Adjustment ................................................................................................................................... I-15

7.1 Gradation Adjust ..................................................................................................................................................................... I-15

7.2 Stabilizer ................................................................................................................................................................................. I-16

7.3 Max Image Density Adj ........................................................................................................................................................... I-16

7.4 Image Background Adj ........................................................................................................................................................... I-16

7.5 Paper Separation Adjustment ................................................................................................................................................. I-16

7.6 Monochrome Density Adjustment ........................................................................................................................................... I-17

7.7 Removable Voltage Adjust ..................................................................................................................................................... I-17

7.8 TCR Level Setting................................................................................................................................................................... I-17

7.9 Transfer Voltage Fine Adj ....................................................................................................................................................... I-17

7.9.1 Primary transfer adj. ...................................................................................................................................................... I-17

7.9.2 2nd Transfer Adj. ........................................................................................................................................................... I-18

7.10 Charge AC Output fine adjustment....................................................................................................................................... I-18

7.11 Thick Paper Density Adjustment .......................................................................................................................................... I-18

7.12 Grad/Dev AC Bias V Selection ............................................................................................................................................. I-19

7.13 Manual Toner Add ................................................................................................................................................................ I-19

8. CS Remote .............................................................................................................................................................. I-20

8.1 Remote Care .......................................................................................................................................................................... I-20

8.1.1 Outline ........................................................................................................................................................................... I-20

8.1.2 Setting up ...................................................................................................................................................................... I-20

8.1.3 Setup confirmation......................................................................................................................................................... I-21

8.1.4 Calling the maintenance ................................................................................................................................................ I-21

8.1.5 Calling the center from the administrator....................................................................................................................... I-21

8.1.6 Checking the transmission log....................................................................................................................................... I-22

8.1.7 Maintenance/Default Settings........................................................................................................................................ I-22

8.1.8 Server Setting ................................................................................................................................................................ I-25

Page 13

8.1.9 Product Auth. Settings ................................................................................................................................................... I-27

8.1.10 Import/Export Settings ................................................................................................................................................. I-27

8.1.11 Auto Initial Dial Setting ................................................................................................................................................ I-27

8.2 Software SW setting for CS Remote Care.............................................................................................................................. I-28

8.2.1 List of software SW for CS Remote Care ...................................................................................................................... I-28

8.2.2 SW No. 01 ..................................................................................................................................................................... I-28

8.2.3 SW No. 02 ..................................................................................................................................................................... I-29

8.2.4 SW No. 03 ..................................................................................................................................................................... I-29

8.2.5 SW No. 04 ..................................................................................................................................................................... I-30

8.2.6 SW No. 05 ..................................................................................................................................................................... I-30

8.2.7 SW No. 06 ..................................................................................................................................................................... I-30

8.2.8 SW No. 07 ..................................................................................................................................................................... I-31

8.2.9 SW No. 08 ..................................................................................................................................................................... I-31

8.2.10 SW No. 09 ................................................................................................................................................................... I-31

8.2.11 SW No. 10 ................................................................................................................................................................... I-32

8.2.12 SW No. 11 ................................................................................................................................................................... I-32

8.2.13 SW No. 12 ................................................................................................................................................................... I-32

8.2.14 SW No. 14 ................................................................................................................................................................... I-33

8.2.15 SW No. 15 ................................................................................................................................................................... I-33

8.2.16 SW No. 18 ................................................................................................................................................................... I-33

8.2.17 SW No. 21 ................................................................................................................................................................... I-34

8.2.18 SW No. 22 ................................................................................................................................................................... I-34

8.2.19 SW No. 23 ................................................................................................................................................................... I-35

8.3 Remote Analysis ..................................................................................................................................................................... I-35

8.3.1 Outline ........................................................................................................................................................................... I-35

8.3.2 Function Setting............................................................................................................................................................. I-35

8.3.3 Send .............................................................................................................................................................................. I-36

8.3.4 History Output................................................................................................................................................................ I-36

8.3.5 CS Remote Analysis Error Code List ............................................................................................................................ I-37

9. System 1.................................................................................................................................................................. I-39

9.1 Marketing Area ....................................................................................................................................................................... I-39

9.1.1 List of functions affected by marketing area setting ...................................................................................................... I-39

9.2 Tel/Fax Number ...................................................................................................................................................................... I-40

9.3 Serial Number ......................................................................................................................................................................... I-40

9.4 Sleep ON/OFF Choice Setting................................................................................................................................................ I-40

9.5 Foolscap Size Setting ............................................................................................................................................................. I-40

9.6 Original Size Detection ...........................................................................................................................................................I-40

9.7 Minimum Paper Size Setting .................................................................................................................................................. I-41

9.8 Install Date .............................................................................................................................................................................. I-41

9.9 Initialization ............................................................................................................................................................................. I-41

9.9.1 List of Clear Item ........................................................................................................................................................... I-42

9.10 Problem Unit Isolation Set. ................................................................................................................................................... I-42

9.11 Post card transfer table ........................................................................................................................................................ I-43

9.12 Warm-up ............................................................................................................................................................................... I-43

9.12.1 Change Warm Up Time............................................................................................................................................... I-43

9.13 Machine State LED Setting .................................................................................................................................................. I-44

9.14 TP Level ............................................................................................................................................................................... I-44

9.15 Burn Prevention Settings ...................................................................................................................................................... I-44

10. System 2 ................................................................................................................................................................I-45

10.1 Storage Installed Setting ...................................................................................................................................................... I-45

10.2 Image Controller Setting ....................................................................................................................................................... I-45

10.3 Option Board Status ............................................................................................................................................................. I-45

10.4 Consumable Life Reminder .................................................................................................................................................. I-45

10.5 Unit Change.......................................................................................................................................................................... I-45

10.5.1 Unit Change................................................................................................................................................................. I-45

10.5.2 Warning display ........................................................................................................................................................... I-46

10.6 Software Switch Setting........................................................................................................................................................ I-47

10.6.1 SW No.012 .................................................................................................................................................................. I-47

10.6.2 SW No.033 .................................................................................................................................................................. I-48

10.6.3 SW No.049 .................................................................................................................................................................. I-48

10.6.4 SW No.051 .................................................................................................................................................................. I-48

10.6.5 SW No.069 .................................................................................................................................................................. I-48

10.6.6 SW No.070 .................................................................................................................................................................. I-49

10.6.7 SW No.072 .................................................................................................................................................................. I-49

10.6.8 SW No.121 .................................................................................................................................................................. I-49

10.6.9 SW No.124 .................................................................................................................................................................. I-49

10.6.10 SW No.135 .................................................................................................................................................................I-49

xii

Page 14

10.6.11 SW No.143 .................................................................................................................................................................I-49

10.6.12 SW No.145 .................................................................................................................................................................I-49

10.6.13 SW No.146 .................................................................................................................................................................I-50

10.6.14 SW No.147 .................................................................................................................................................................I-50

10.6.15 SW No.151 .................................................................................................................................................................I-50

10.6.16 SW No.152 .................................................................................................................................................................I-50

10.6.17 SW No.155 .................................................................................................................................................................I-51

10.6.18 SW No.157 .................................................................................................................................................................I-51

10.6.19 SW No.163 .................................................................................................................................................................I-51

10.6.20 SW No.188 .................................................................................................................................................................I-51

10.6.21 SW No.203 .................................................................................................................................................................I-51

10.6.22 SW No.206 .................................................................................................................................................................I-51

10.6.23 SW No.226 .................................................................................................................................................................I-51

10.6.24 SW No.227 .................................................................................................................................................................I-52

10.6.25 SW No.230 .................................................................................................................................................................I-52

10.7 CCD Calibration.................................................................................................................................................................... I-52

10.8 LCT (Built-in) Size Settings .................................................................................................................................................. I-52

10.9 LCT Paper Size Setting ........................................................................................................................................................ I-52

10.10 Paper Reuse Box Setting ................................................................................................................................................... I-53

10.11 Line Mag Setting................................................................................................................................................................. I-53

10.12 Data Capture ...................................................................................................................................................................... I-53

10.13 Split Line Detect. Setting .................................................................................................................................................... I-54

10.14 Stamp ................................................................................................................................................................................. I-55

10.15 Network Fax Settings ......................................................................................................................................................... I-55

10.16 RX File Change Page Name .............................................................................................................................................. I-56

10.17 ADF Settings ...................................................................................................................................................................... I-56

10.18 Image Stabilization Setting ................................................................................................................................................. I-56

10.19 Multifeed Sensor Status ..................................................................................................................................................... I-56

10.20 User Paper Settings ........................................................................................................................................................... I-56

10.21 Coverage Rate Screen ....................................................................................................................................................... I-57

10.22 JAM Code Display Setting.................................................................................................................................................. I-57

10.23 Purge Setting...................................................................................................................................................................... I-57

10.24 Import Config. Data ............................................................................................................................................................ I-57

10.24.1 BootUp Screen ...........................................................................................................................................................I-57

10.24.2 Machine Image...........................................................................................................................................................I-58

10.24.3 Custom Auth. Setting .................................................................................................................................................I-58

10.25 Install Data.......................................................................................................................................................................... I-58

10.26 Local Interface Kit Setting................................................................................................................................................... I-59

10.27 CIS Image Adjustment........................................................................................................................................................ I-59

10.28 Display Eco Index............................................................................................................................................................... I-59

10.29 Internal Error. Auto Cancel ................................................................................................................................................. I-59

10.30 Acquiring Settings............................................................................................................................................................... I-60

10.31 Driver Install........................................................................................................................................................................ I-60

10.32 Application Change Setting ................................................................................................................................................ I-60

10.33 Custom Pattern................................................................................................................................................................... I-60

10.34 Maintenance Mode ............................................................................................................................................................. I-61

10.35 Smart Fusing Control.......................................................................................................................................................... I-61

10.36 Cleaning Unit Setting.......................................................................................................................................................... I-61

10.37 Auth. Function Enable ........................................................................................................................................................ I-61

11. Counter ..................................................................................................................................................................I-63

11.1 Outline .................................................................................................................................................................................. I-63

11.2 Life ........................................................................................................................................................................................ I-63

11.3 Service Call .......................................................................................................................................................................... I-64

11.4 Section Service Call ............................................................................................................................................................. I-64

11.5 Warning ................................................................................................................................................................................ I-64

11.6 Maintenance ......................................................................................................................................................................... I-64

11.7 Service Total......................................................................................................................................................................... I-64

11.8 Counter Of Each Mode ......................................................................................................................................................... I-65

11.9 Service Call History (Data) ................................................................................................................................................... I-65

11.10 ADF Paper Pages............................................................................................................................................................... I-65

11.11 Paper Jam History .............................................................................................................................................................. I-65

11.12 Fax Connection Error ......................................................................................................................................................... I-65

11.13 ADF Scan Glass Contamin. Counter.................................................................................................................................. I-65

11.14 Parts Counter (Fixed) ......................................................................................................................................................... I-65

11.14.1 Fixed parts to be counted...........................................................................................................................................I-65

11.15 Jam..................................................................................................................................................................................... I-66

11.16 Section JAM ....................................................................................................................................................................... I-66

xiii

Page 15

11.17 Instantaneous Power Failure.............................................................................................................................................. I-66

11.18 Detail code history .............................................................................................................................................................. I-66

11.19 Recoverable error counter.................................................................................................................................................. I-67

12. List Output..............................................................................................................................................................I-68

12.1 Individual list print output ...................................................................................................................................................... I-68

12.2 Batch list CSV output............................................................................................................................................................ I-68

13. State Confirmation .................................................................................................................................................I-69

13.1 Sensor Check ....................................................................................................................................................................... I-69

13.1.1 bizhub C360i/C300i/C250i........................................................................................................................................... I-69

13.1.2 JS-506 ......................................................................................................................................................................... I-70

13.1.3 FS-533......................................................................................................................................................................... I-71

13.1.4 FS-536/FS-536SD ....................................................................................................................................................... I-71

13.2 Table Number ....................................................................................................................................................................... I-73

13.3 Level History 1 ...................................................................................................................................................................... I-73

13.4 Level History 2 ...................................................................................................................................................................... I-73

13.5 Temp. /Humidity/Atmospheric Press .................................................................................................................................... I-73

13.6 CCD Check........................................................................................................................................................................... I-74

13.7 Memory/Storage Adjustment ................................................................................................................................................ I-74

13.7.1 Memory Check ............................................................................................................................................................ I-74

13.7.2 Compress / Decompression Check ............................................................................................................................. I-75

13.7.3 JPEG check................................................................................................................................................................. I-75

13.7.4 Memory Bus Check ..................................................................................................................................................... I-75

13.7.5 DSC Bus Check........................................................................................................................................................... I-75

13.7.6 Storage R/W Check..................................................................................................................................................... I-75

13.7.7 Format ......................................................................................................................................................................... I-75

13.8 Memory/Storage Status ........................................................................................................................................................ I-76

13.9 Color Regist .......................................................................................................................................................................... I-76

13.10 Load Check ........................................................................................................................................................................ I-76

13.10.1 Load check list............................................................................................................................................................I-76

13.11 Adjustment Data List .......................................................................................................................................................... I-81

13.12 Self-diag. (Full/Individual) ................................................................................................................................................... I-81

13.12.1 Overview of self-diagnostic function...........................................................................................................................I-81

13.12.2 Self-diag. (Full) ...........................................................................................................................................................I-82

13.12.3 Self-diag. (Individual)..................................................................................................................................................I-83

14. Test Mode ..............................................................................................................................................................I-87

14.1 Test Pattern .......................................................................................................................................................................... I-87

14.1.1 Gradation Pattern ........................................................................................................................................................ I-87

14.1.2 Halftone Pattern........................................................................................................................................................... I-87

14.1.3 Lattice Pattern ............................................................................................................................................................. I-87

14.1.4 Solid Pattern ................................................................................................................................................................ I-88

14.1.5 Color Sample............................................................................................................................................................... I-88

14.1.6 8 Color Solid Pattern ................................................................................................................................................... I-89

14.1.7 CMM pattern................................................................................................................................................................ I-89

14.2 Paper Passage Test ............................................................................................................................................................. I-89

14.3 Fax Test................................................................................................................................................................................ I-90

15. ADF ........................................................................................................................................................................I-92

15.1 Original Stop Position ........................................................................................................................................................... I-92

15.2 Registration Loop Adj. .......................................................................................................................................................... I-93

15.3 Auto Stop Position Adjustment ............................................................................................................................................. I-93

15.4 Paper Passage ..................................................................................................................................................................... I-94

15.5 Sensor Check ....................................................................................................................................................................... I-94

15.6 Original Tray Width ............................................................................................................................................................... I-94

15.7 Read Pos Adj........................................................................................................................................................................ I-95

15.8 Feed Zoom ........................................................................................................................................................................... I-95

15.9 Scanning Light Adjustment ................................................................................................................................................... I-96

15.10 Mixed original size adjustment ........................................................................................................................................... I-96

15.11 Home Read Position Adjust................................................................................................................................................ I-96

15.12 FD-Mag. Adj. (B)................................................................................................................................................................. I-96

15.13 Main Scanning Direction Zoom .......................................................................................................................................... I-97

15.14 Skew Measurement............................................................................................................................................................ I-97

15.15 ADF automatic Adjustment................................................................................................................................................. I-98

15.16 Multi-Feed DetectionAdj ..................................................................................................................................................... I-98

16. FAX ......................................................................................................................................................................I-100

16.1 Outline ................................................................................................................................................................................ I-100

16.1.1 PBX operating environment....................................................................................................................................... I-101

xiv

Page 16

16.2 Modem/NCU ....................................................................................................................................................................... I-101

16.3 Network .............................................................................................................................................................................. I-103

16.4 System................................................................................................................................................................................ I-104

16.5 Fax File Format .................................................................................................................................................................. I-105

16.6 Communication................................................................................................................................................................... I-106

16.7 List Output .......................................................................................................................................................................... I-107

16.8 Function Parameter ............................................................................................................................................................ I-107

16.9 Initialization ......................................................................................................................................................................... I-108

16.10 Fax Line Std. Setting ........................................................................................................................................................ I-108

16.11 Function parameter list (for all fax lines)........................................................................................................................... I-108

16.11.1 Job setting ................................................................................................................................................................I-108

16.11.2 Function setting ........................................................................................................................................................I-112

16.11.3 Report setting ...........................................................................................................................................................I-116

16.11.4 Panel settings...........................................................................................................................................................I-118

16.12 Function parameter list (for separate line)........................................................................................................................ I-121

16.12.1 Function setting 1 .....................................................................................................................................................I-121

16.12.2 Function setting 2 .....................................................................................................................................................I-124

16.12.3 Function setting 3 .....................................................................................................................................................I-126

16.12.4 Function setting 4 .....................................................................................................................................................I-128

16.12.5 Function setting 5 .....................................................................................................................................................I-131

16.12.6 Fax capacity setting..................................................................................................................................................I-134

16.12.7 HP setting.................................................................................................................................................................I-136

17. Finisher ................................................................................................................................................................I-139

17.1 FS-FN adjustment .............................................................................................................................................................. I-139

17.1.1 Center Staple Position............................................................................................................................................... I-139

17.1.2 Half-Fold Position ...................................................................................................................................................... I-139

17.1.3 1st Tri-Fold Adjustment/2nd Tri-Fold Adjustment ...................................................................................................... I-140

17.1.4 Punch Edge Adj......................................................................................................................................................... I-140

17.1.5 Punch Regist Loop Size ............................................................................................................................................ I-141

17.1.6 Finisher Components Test Mode .............................................................................................................................. I-141

17.1.7 Alignment Plate Position............................................................................................................................................ I-142

17.1.8 Paper Alignment Guides W. Adj. ............................................................................................................................... I-142

17.2 Punch Option Setting.......................................................................................................................................................... I-142

17.3 Max. # of Folded Sheets Setting ........................................................................................................................................ I-143

17.4 Job Separator ..................................................................................................................................................................... I-143

18. Network Settings ..................................................................................................................................................I-144

18.1 2nd Network Setting ........................................................................................................................................................... I-144

18.2 Remote Service Setting ...................................................................................................................................................... I-144

18.2.1 Function Setting......................................................................................................................................................... I-144

18.2.2 Proxy Server Setting.................................................................................................................................................. I-144

18.2.3 Maintenance Setting.................................................................................................................................................. I-145

18.2.4 XMPP Settings .......................................................................................................................................................... I-145

18.2.5 Always Connection Setting........................................................................................................................................ I-145

18.3 Port Settings ....................................................................................................................................................................... I-146

18.4 MTU Param. set. ................................................................................................................................................................ I-146

19. Machine Update Setting.......................................................................................................................................I-147

19.1 Internet ISW........................................................................................................................................................................ I-147

19.1.1 Internet ISW Set ........................................................................................................................................................ I-147

19.1.2 HTTP Setting ............................................................................................................................................................. I-147

19.1.3 FTP Settings.............................................................................................................................................................. I-147

19.1.4 Forwarding Access Setting........................................................................................................................................ I-147

19.1.5 Download................................................................................................................................................................... I-147

19.1.6 Update Start Time Settings ....................................................................................................................................... I-148

19.2 Machine Auto Update setting ............................................................................................................................................. I-148

19.2.1 Auto Update setting ................................................................................................................................................... I-148

19.2.2 Relay server setting................................................................................................................................................... I-153

19.2.3 Transmission log Update........................................................................................................................................... I-154

19.2.4 Transmission Server Log........................................................................................................................................... I-155

19.2.5 Update Log Display ................................................................................................................................................... I-155

19.2.6 Relay Server Log Confirmation ................................................................................................................................. I-155

19.2.7 Manually Update........................................................................................................................................................ I-156

19.2.8 Machine Import setting .............................................................................................................................................. I-156

19.2.9 Machine Export setting .............................................................................................................................................. I-156

19.2.10 Machine Update Password ......................................................................................................................................I-157

19.3 Firmware Update Parameters ............................................................................................................................................ I-157

19.4 Firmware Rollback .............................................................................................................................................................. I-157

Page 17

19.5 Copy Network Settings ....................................................................................................................................................... I-158

19.5.1 Outline ....................................................................................................................................................................... I-158

19.5.2 Environmental preparations....................................................................................................................................... I-158

19.5.3 Deliver/setting procedure........................................................................................................................................... I-159

J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS ................................................ J-1

1. BILLING SETTING ....................................................................................................................................................J-1

1.1 Outline ..................................................................................................................................................................................... J-1

1.2 Counter Setting ........................................................................................................................................................................ J-1

1.2.1 Total Counter Mode ........................................................................................................................................................ J-1

1.2.2 Large Size Counter Mode............................................................................................................................................... J-1

1.2.3 Banner Paper Counter Mode.......................................................................................................................................... J-2

1.2.4 Banner Counter Double Count Mode ............................................................................................................................. J-2

1.2.5 Count by the combination of each setting ...................................................................................................................... J-2

1.3 Management Function Choice ................................................................................................................................................. J-3

1.3.1 Key counter only ............................................................................................................................................................. J-3

1.3.2 Management Device 2.................................................................................................................................................... J-4

1.3.3 Vendor 2 ......................................................................................................................................................................... J-4

1.3.4 Key Counter IF Vendor ................................................................................................................................................... J-5

1.4 Authentication Device 2 ........................................................................................................................................................... J-6

1.4.1 Installation procedures of authentication unit ................................................................................................................. J-6

1.5 Setting items that automatically change the setting values ..................................................................................................... J-8

1.5.1 When the vendor2 is mounted........................................................................................................................................ J-8

1.5.2 When the key counter IF vendor is mounted.................................................................................................................. J-9

1.5.3 When the management device 2 is mounted ................................................................................................................. J-9

1.5.4 When the authentication device 2 is mounted................................................................................................................ J-9

1.6 Coverage Rate Clear ............................................................................................................................................................... J-9

1.7 License Management ............................................................................................................................................................ J-10

1.7.1 Activation ...................................................................................................................................................................... J-10

1.7.2 Deactivation .................................................................................................................................................................. J-13

1.7.3 Repair ........................................................................................................................................................................... J-16

1.7.4 Initialize......................................................................................................................................................................... J-20

1.7.5 Request Code............................................................................................................................................................... J-21

1.7.6 List ................................................................................................................................................................................ J-21

1.7.7 Function List ................................................................................................................................................................. J-21

1.8 Manage OpenAPI Authentication .......................................................................................................................................... J-21

1.9 WebDAV Server Setting ........................................................................................................................................................ J-21

1.10 Print Counter Clear .............................................................................................................................................................. J-22

1.11 Coverage Counter Detail ..................................................................................................................................................... J-22

2. ENHANCED SECURITY .........................................................................................................................................J-23

2.1 Outline ................................................................................................................................................................................... J-23

2.2 CE Password ......................................................................................................................................................................... J-23

2.3 Administrator Password ......................................................................................................................................................... J-23

2.4 Administrator Feature Level................................................................................................................................................... J-23

2.5 CE Authentication .................................................................................................................................................................. J-24

2.6 Life Stop Setting .................................................................................................................................................................... J-24

2.7 Memory Data Backup ............................................................................................................................................................ J-24

2.8 operation Ban release time .................................................................................................................................................... J-24

2.9 Administrator unlocking ......................................................................................................................................................... J-25

2.10 Engine FW DipSW............................................................................................................................................................... J-25

2.10.1 Details of Each Function..............................................................................................................................................J-26

2.11 Storage Data Backup .......................................................................................................................................................... J-31

2.12 Migration data backup ......................................................................................................................................................... J-32

2.13 Data Backup ........................................................................................................................................................................ J-32

2.13.1 Client Function.............................................................................................................................................................J-32

2.13.2 Server Function ...........................................................................................................................................................J-35

2.14 ADF Data Backup ................................................................................................................................................................ J-35

2.15 Customer Type .................................................................................................................................................................... J-35

2.16 TPM Setting ......................................................................................................................................................................... J-36

2.17 FWCert. Settings ................................................................................................................................................................. J-36

3. DEBUG SETTINGS .................................................................................................................................................J-37

3.1 Outline ................................................................................................................................................................................... J-37

3.2 Debug Log Output ................................................................................................................................................................. J-37

3.3 Acquiring Mode ...................................................................................................................................................................... J-37

3.4 TX Debug Log Settings.......................................................................................................................................................... J-38

3.5 Remote Log Retrieval ............................................................................................................................................................ J-39

xvi

Page 18

3.6 Remote Log Server Settings.................................................................................................................................................. J-39

3.7 Enable Core Dump ................................................................................................................................................................ J-40

3.8 USB Password....................................................................................................................................................................... J-40

3.9 Other ...................................................................................................................................................................................... J-40

3.9.1 Screen Capture ............................................................................................................................................................ J-40

3.9.2 Panel Operation Playback ............................................................................................................................................ J-41

3.10 Operation of the debug log function .................................................................................................................................... J-41

3.10.1 Advance preparation ...................................................................................................................................................J-41

3.10.2 Basic mode..................................................................................................................................................................J-41

3.10.3 Enhance mode ............................................................................................................................................................J-42

K FIRMWARE ....................................................................................................................................K-1

1. Overview...................................................................................................................................................................K-1

2. USB memory ............................................................................................................................................................K-2

2.1 Preparation ..............................................................................................................................................................................K-2

2.2 Rewriting of Firmware ..............................................................................................................................................................K-2

2.3 Action when data transfer fails.................................................................................................................................................K-4

3. Internet ISW..............................................................................................................................................................K-5

3.1 Service environment ................................................................................................................................................................K-5

3.2 Preparation ..............................................................................................................................................................................K-5

3.2.1 Making the firmware data ...............................................................................................................................................K-5

3.2.2 Internet ISW Set .............................................................................................................................................................K-5

3.3 Rewriting of Firmware ..............................................................................................................................................................K-5

4. Auto Update setting ..................................................................................................................................................K-7

4.1 Service environment ................................................................................................................................................................K-7

4.2 Preparation ..............................................................................................................................................................................K-7

4.3 Rewriting of Firmware ..............................................................................................................................................................K-7

5. How to install the i-Option data.................................................................................................................................K-8

5.1 Available function for i-Option ..................................................................................................................................................K-8

5.2 LK-107/LK-108 font data installation procedure ......................................................................................................................K-8

6. Creating back up files when updating firmware ........................................................................................................K-9

L TROUBLESHOOTING ................................................................................................................... L-1

1. JAM CODE ............................................................................................................................................................... L-1

1.1 JAM display ............................................................................................................................................................................. L-1

1.2 Initial check items .................................................................................................................................................................... L-2

1.3 List of the JAM code ................................................................................................................................................................L-3

1.4 JAM that do not display the JAM code .................................................................................................................................... L-4

1.5 1#-##........................................................................................................................................................................................ L-5

1.5.1 10-01, 10-02, 10-40 ........................................................................................................................................................ L-5

1.5.2 11-01, 11-02, 11-05, 11-40 ............................................................................................................................................. L-6

1.5.3 12-01, 12-05, 12-40 ........................................................................................................................................................ L-7

1.5.4 13-01, 13-05, 13-40 ........................................................................................................................................................ L-7

1.5.5 14-01, 14-05, 14-40 ........................................................................................................................................................ L-8

1.5.6 15-01, 15-40 ................................................................................................................................................................... L-8

1.5.7 16-01, 16-05, 16-40 ........................................................................................................................................................ L-9

1.6 2#-##...................................................................................................................................................................................... L-10

1.6.1 20-01, 20-02 ................................................................................................................................................................. L-10

1.6.2 20-21 ............................................................................................................................................................................ L-10

1.6.3 20-22 ............................................................................................................................................................................ L-11

1.7 3#-##...................................................................................................................................................................................... L-12

1.7.1 30-03 ............................................................................................................................................................................ L-12

1.7.2 32-01, 32-05, 32-06 ...................................................................................................................................................... L-12

1.8 6#-##...................................................................................................................................................................................... L-13

1.8.1 66-01, 66-11, 66-21 ...................................................................................................................................................... L-13

1.8.2 66-02 ............................................................................................................................................................................ L-13

1.8.3 66-03, 66-13, 66-23, 66-33 ........................................................................................................................................... L-14

1.8.4 66-04, 66-14, 66-24, 66-34 ........................................................................................................................................... L-15

1.8.5 66-05, 66-06, 66-15 ...................................................................................................................................................... L-16

1.8.6 66-07 ............................................................................................................................................................................ L-17

1.8.7 66-08 ............................................................................................................................................................................ L-18

1.9 7#-##...................................................................................................................................................................................... L-18

1.9.1 72-14 ............................................................................................................................................................................ L-18

1.9.2 72-15 ............................................................................................................................................................................ L-19

xvii

Page 19

1.9.3 72-16 ............................................................................................................................................................................ L-19

1.9.4 72-17 ............................................................................................................................................................................ L-20

1.9.5 72-18 ............................................................................................................................................................................ L-20

1.9.6 72-19 ............................................................................................................................................................................ L-21

1.9.7 72-21 ............................................................................................................................................................................ L-21

1.9.8 72-22 ............................................................................................................................................................................ L-21

1.9.9 72-23 ............................................................................................................................................................................ L-22

1.9.10 72-25, 72-26 ............................................................................................................................................................... L-22

1.9.11 72-43 .......................................................................................................................................................................... L-22

1.9.12 72-70 .......................................................................................................................................................................... L-23

1.9.13 72-81 .......................................................................................................................................................................... L-23

1.9.14 72-84 .......................................................................................................................................................................... L-24

1.9.15 72-85 .......................................................................................................................................................................... L-24

1.9.16 72-86 .......................................................................................................................................................................... L-24

1.9.17 72-87 .......................................................................................................................................................................... L-25

1.9.18 75-42 .......................................................................................................................................................................... L-25

1.9.19 75-43 .......................................................................................................................................................................... L-25

1.10 9#-## ................................................................................................................................................................................... L-26

1.10.1 92-01, 92-02, 92-40 .................................................................................................................................................... L-26

1.10.2 93-10 .......................................................................................................................................................................... L-26

1.10.3 99-01 .......................................................................................................................................................................... L-27

1.10.4 99-02 .......................................................................................................................................................................... L-27

1.10.5 99-03 .......................................................................................................................................................................... L-27

1.10.6 99-04 .......................................................................................................................................................................... L-28

1.10.7 99-05 .......................................................................................................................................................................... L-28

1.10.8 99-06 .......................................................................................................................................................................... L-28

1.10.9 99-07 .......................................................................................................................................................................... L-28

1.10.10 99-08 .........................................................................................................................................................................L-29

1.10.11 99-09 .........................................................................................................................................................................L-29

1.11 Sensor layout....................................................................................................................................................................... L-29

1.11.1 bizhub C360i/C300i/C250i.......................................................................................................................................... L-29

1.11.2 DF-632........................................................................................................................................................................ L-30

1.11.3 DF-714........................................................................................................................................................................ L-30

1.11.4 PC-116/PC-216 .......................................................................................................................................................... L-31

1.11.5 PC-416 ....................................................................................................................................................................... L-32

1.11.6 LU-302........................................................................................................................................................................ L-32

1.11.7 FS-533/PK-519........................................................................................................................................................... L-33

1.11.8 FS-536/FS-536SD/PK-520 ......................................................................................................................................... L-33

2. MALFUNCTION CODE .......................................................................................................................................... L-34

2.1 Display procedure .................................................................................................................................................................. L-34

2.2 List of the malfunction code ................................................................................................................................................... L-34

2.3 S-1 .........................................................................................................................................................................................L-34

2.4 S-2 .........................................................................................................................................................................................L-35

2.5 D-1 ......................................................................................................................................................................................... L-35

2.6 D-3 ......................................................................................................................................................................................... L-36

2.7 P-5, P-28................................................................................................................................................................................ L-36

2.8 P-6, P-7, P-8, P-9 .................................................................................................................................................................. L-36

2.9 P-14 .......................................................................................................................................................................................L-37

2.10 P-21 ..................................................................................................................................................................................... L-37

2.11 P-22 ..................................................................................................................................................................................... L-38

2.12 P-27 ..................................................................................................................................................................................... L-38

2.13 P-33 ..................................................................................................................................................................................... L-38

2.14 P-34 ..................................................................................................................................................................................... L-38

3. TROUBLE CODE ................................................................................................................................................... L-40

3.1 Overview of trouble code ....................................................................................................................................................... L-40

3.2 Overview of troubleshooting procedure ................................................................................................................................. L-40

3.2.1 Troubleshooting procedure........................................................................................................................................... L-41

3.3 Trouble resetting procedure................................................................................................................................................... L-41

3.3.1 Trouble resetting procedure by Trouble Reset key ...................................................................................................... L-41

3.3.2 Trouble resetting procedure by the auto cancel function.............................................................................................. L-42

3.3.3 Trouble resetting procedure by remote operation ........................................................................................................ L-42

3.4 Trouble isolation function ....................................................................................................................................................... L-42

3.5 List of the trouble code .......................................................................................................................................................... L-44

3.6 C0### ....................................................................................................................................................................................L-51

3.6.1 C0002 ........................................................................................................................................................................... L-51

3.6.2 C0106 ........................................................................................................................................................................... L-51

3.6.3 C0107 ........................................................................................................................................................................... L-52

xviii

Page 20

3.6.4 C0108 ........................................................................................................................................................................... L-53

3.6.5 C0109 ........................................................................................................................................................................... L-53

3.6.6 C0202 ........................................................................................................................................................................... L-53

3.6.7 C0204 ........................................................................................................................................................................... L-54

3.6.8 C0206 ........................................................................................................................................................................... L-54

3.6.9 C0208 ........................................................................................................................................................................... L-54

3.6.10 C0210 ......................................................................................................................................................................... L-55

3.6.11 C0211 ......................................................................................................................................................................... L-55

3.6.12 C0214 ......................................................................................................................................................................... L-56

3.6.13 C0216 ......................................................................................................................................................................... L-57

3.7 C1### ....................................................................................................................................................................................L-57

3.7.1 C1004, C1014 .............................................................................................................................................................. L-57

3.7.2 C1081, C1082 .............................................................................................................................................................. L-57

3.7.3 C1102 ........................................................................................................................................................................... L-58

3.7.4 C1103 ........................................................................................................................................................................... L-59

3.7.5 C1105 ........................................................................................................................................................................... L-59

3.7.6 C1106 ........................................................................................................................................................................... L-60

3.7.7 C1109 ........................................................................................................................................................................... L-61

3.7.8 C1112 ........................................................................................................................................................................... L-61

3.7.9 C1113 ........................................................................................................................................................................... L-62

3.7.10 C1114 ......................................................................................................................................................................... L-62

3.7.11 C1115 ......................................................................................................................................................................... L-62

3.7.12 C1132 ......................................................................................................................................................................... L-63

3.7.13 C1140 ......................................................................................................................................................................... L-64

3.7.14 C1141 ......................................................................................................................................................................... L-64

3.7.15 C1144 ......................................................................................................................................................................... L-65

3.7.16 C1145 ......................................................................................................................................................................... L-65

3.7.17 C1156 ......................................................................................................................................................................... L-65

3.7.18 C1182 ......................................................................................................................................................................... L-66

3.7.19 C1184 ......................................................................................................................................................................... L-66

3.7.20 C1195 ......................................................................................................................................................................... L-67

3.7.21 C1196 ......................................................................................................................................................................... L-67

3.7.22 C1197 ......................................................................................................................................................................... L-67

3.7.23 C11A1......................................................................................................................................................................... L-68

3.7.24 C11A2......................................................................................................................................................................... L-68

3.7.25 C11E1......................................................................................................................................................................... L-68

3.7.26 C1402 ......................................................................................................................................................................... L-69

3.8 C2### ....................................................................................................................................................................................L-69

3.8.1 C2152, C2153, C2154, C2155, C2156......................................................................................................................... L-69

3.8.2 C2204 ........................................................................................................................................................................... L-70

3.8.3 C2253, C2254 .............................................................................................................................................................. L-70

3.8.4 C2255, C2256 .............................................................................................................................................................. L-71

3.8.5 C2355 ........................................................................................................................................................................... L-71

3.8.6 C2411, C2412, C2413, C2414 ..................................................................................................................................... L-71

3.8.7 C2551, C2553, C2555 .................................................................................................................................................. L-72

3.8.8 C2552, C2554, C2556, C2558 ..................................................................................................................................... L-72

3.8.9 C2557 ........................................................................................................................................................................... L-73

3.8.10 C2559, C255A, C255B ............................................................................................................................................... L-73

3.8.11 C255C ........................................................................................................................................................................ L-74

3.8.12 C2561, C2562, C2563, C2564 ................................................................................................................................... L-74

3.8.13 C2650 ......................................................................................................................................................................... L-75

3.8.14 C2A11, C2A12, C2A13, C2A14.................................................................................................................................. L-75

3.8.15 C2A21, C2A22, C2A23, C2A24.................................................................................................................................. L-76

3.9 C3### ....................................................................................................................................................................................L-76

3.9.1 C3101, C3103 .............................................................................................................................................................. L-76

3.9.2 C3201, C3202 .............................................................................................................................................................. L-77

3.9.3 C3302 ........................................................................................................................................................................... L-77

3.9.4 C3425 ........................................................................................................................................................................... L-78

3.9.5 C3722, C3725, C3726 .................................................................................................................................................. L-78

3.9.6 C3736, C3739 .............................................................................................................................................................. L-78

3.9.7 C3825, C3826 .............................................................................................................................................................. L-79

3.9.8 C3922, C3925, C3926 .................................................................................................................................................. L-79

3.9.9 C392B........................................................................................................................................................................... L-79

3.10 C4### .................................................................................................................................................................................. L-80

3.10.1 C40A2, C40A3, C40A4, C40A5, C40A6, C40C3, C40C5 .......................................................................................... L-80

3.10.2 C4101 ......................................................................................................................................................................... L-80

3.10.3 C4501 ......................................................................................................................................................................... L-80

3.11 C5### .................................................................................................................................................................................. L-81

xix

Page 21

3.11.1 C5102, C5103 ............................................................................................................................................................ L-81

3.11.2 C5351 ......................................................................................................................................................................... L-81

3.11.3 C5355 ......................................................................................................................................................................... L-81

3.11.4 C5360 ......................................................................................................................................................................... L-82

3.11.5 C5370 ......................................................................................................................................................................... L-82

3.11.6 C5372 ......................................................................................................................................................................... L-83

3.11.7 C5501 ......................................................................................................................................................................... L-83

3.11.8 C5601 ......................................................................................................................................................................... L-83

3.11.9 C5603 ......................................................................................................................................................................... L-83

3.11.10 C5605, C5606 ...........................................................................................................................................................L-84

3.11.11 C5610........................................................................................................................................................................L-84

3.11.12 C5620........................................................................................................................................................................L-84

3.12 C6### .................................................................................................................................................................................. L-84

3.12.1 C6001 ......................................................................................................................................................................... L-84

3.12.2 C6002 ......................................................................................................................................................................... L-85

3.12.3 C6102, C6103 ............................................................................................................................................................ L-85

3.12.4 C6104, C6105 ............................................................................................................................................................ L-86

3.12.5 C6704 ......................................................................................................................................................................... L-86

3.12.6 C6751 ......................................................................................................................................................................... L-86

3.12.7 C6752 ......................................................................................................................................................................... L-87

3.12.8 C6753 ......................................................................................................................................................................... L-87

3.12.9 C6754, C6755 ............................................................................................................................................................ L-87

3.12.10 C6756........................................................................................................................................................................L-87

3.12.11 C6901, C6902, C6903, C6911, C6912, C6913.........................................................................................................L-88

3.12.12 C6F01, C6F02, C6F03, C6F04, C6F05, C6F06, C6F07, C6F08, C6F09, C6F0A, C6FDC, C6FDD ........................L-88

3.13 C7### .................................................................................................................................................................................. L-89

3.13.1 C7106 ......................................................................................................................................................................... L-89

3.13.2 C7107 ......................................................................................................................................................................... L-89

3.13.3 C7111 ......................................................................................................................................................................... L-89

3.13.4 C7112 ......................................................................................................................................................................... L-89

3.13.5 C7131 ......................................................................................................................................................................... L-90

3.13.6 C7132 ......................................................................................................................................................................... L-90

3.13.7 C7133 ......................................................................................................................................................................... L-90

3.13.8 C7134 ......................................................................................................................................................................... L-90

3.13.9 C7135 ......................................................................................................................................................................... L-91

3.13.10 C7137........................................................................................................................................................................L-91

3.13.11 C7139........................................................................................................................................................................L-91

3.13.12 C7141........................................................................................................................................................................L-91

3.13.13 C7151, C7152, C7153...............................................................................................................................................L-92

3.13.14 C7201........................................................................................................................................................................L-92

3.13.15 C7202........................................................................................................................................................................L-92

3.13.16 C7205........................................................................................................................................................................L-93

3.13.17 C7206........................................................................................................................................................................L-93

3.13.18 C7207........................................................................................................................................................................L-93

3.13.19 C720A .......................................................................................................................................................................L-93

3.13.20 C720B .......................................................................................................................................................................L-94

3.13.21 C720D .......................................................................................................................................................................L-94

3.13.22 C7241........................................................................................................................................................................L-94

3.13.23 C7242........................................................................................................................................................................L-94

3.13.24 C7243........................................................................................................................................................................L-95

3.13.25 C7251........................................................................................................................................................................L-95

3.13.26 C7301........................................................................................................................................................................L-95

3.13.27 C7302........................................................................................................................................................................L-95

3.13.28 C7304........................................................................................................................................................................L-96

3.13.29 C7305........................................................................................................................................................................L-96

3.13.30 C7501........................................................................................................................................................................L-96

3.13.31 C7502........................................................................................................................................................................L-96

3.13.32 C7601........................................................................................................................................................................L-97

3.13.33 C7602........................................................................................................................................................................L-97

3.13.34 C7603........................................................................................................................................................................L-97

3.13.35 C7604........................................................................................................................................................................L-98

3.13.36 C7605........................................................................................................................................................................L-98

3.13.37 C7607........................................................................................................................................................................L-98

3.13.38 C760A .......................................................................................................................................................................L-99

3.13.39 C760B .......................................................................................................................................................................L-99

3.13.40 C760C .......................................................................................................................................................................L-99

3.13.41 C760D .......................................................................................................................................................................L-99

3.13.42 C760E .....................................................................................................................................................................L-100

Page 22

3.13.43 C760F......................................................................................................................................................................L-100

3.13.44 C7622, C7623 .........................................................................................................................................................L-100

3.13.45 C7631......................................................................................................................................................................L-100

3.13.46 C7633......................................................................................................................................................................L-101

3.14 C8### ................................................................................................................................................................................ L-101

3.14.1 C8101 ....................................................................................................................................................................... L-101

3.14.2 C8107 ....................................................................................................................................................................... L-102

3.14.3 C8302 ....................................................................................................................................................................... L-102

3.14.4 C8402 ....................................................................................................................................................................... L-103

3.15 C9### ................................................................................................................................................................................ L-103

3.15.1 C9401, C9402 .......................................................................................................................................................... L-103

3.15.2 C9403, C9404 .......................................................................................................................................................... L-103

3.15.3 C9701 ....................................................................................................................................................................... L-104

3.15.4 C9702 ....................................................................................................................................................................... L-104

3.16 CA###................................................................................................................................................................................ L-105

3.16.1 CA051, CA052, CA053............................................................................................................................................. L-105

3.17 CC### ............................................................................................................................................................................... L-105

3.17.1 CC002 ...................................................................................................................................................................... L-105

3.17.2 CC140 ...................................................................................................................................................................... L-105

3.17.3 CC151, CC152 ......................................................................................................................................................... L-105

3.17.4 CC155 ...................................................................................................................................................................... L-106

3.17.5 CC156 ...................................................................................................................................................................... L-106

3.17.6 CC159, CC15A......................................................................................................................................................... L-106

3.17.7 CC15B ...................................................................................................................................................................... L-106

3.17.8 CC15C...................................................................................................................................................................... L-107

3.17.9 CC163 ...................................................................................................................................................................... L-107

3.17.10 CC164 .....................................................................................................................................................................L-107

3.17.11 CC165 .....................................................................................................................................................................L-107

3.17.12 CC170, CC171, CC172, CC173, CC174, CC180, CC181, CC182, CC183, CC184, CC185, CC186 ....................L-108

3.17.13 CC190 .....................................................................................................................................................................L-108

3.17.14 CC191 .....................................................................................................................................................................L-108

3.17.15 CC211 .....................................................................................................................................................................L-109

3.17.16 CC212 .....................................................................................................................................................................L-109

3.17.17 CC213 .....................................................................................................................................................................L-109

3.17.18 CC214 .....................................................................................................................................................................L-110

3.17.19 CC216 .....................................................................................................................................................................L-110

3.17.20 CC301 .....................................................................................................................................................................L-110

3.17.21 CC302 .....................................................................................................................................................................L-110

3.17.22 CCC00.....................................................................................................................................................................L-111

3.18 CD### ............................................................................................................................................................................... L-111

3.18.1 CD002 ...................................................................................................................................................................... L-111

3.18.2 CD004, CD00F, CD020............................................................................................................................................ L-111

3.18.3 CD010 ...................................................................................................................................................................... L-111

3.18.4 CD011 ...................................................................................................................................................................... L-112

3.18.5 CD012 ...................................................................................................................................................................... L-112

3.18.6 CD030 ...................................................................................................................................................................... L-112

3.18.7 CD041, CD042, CD043, CD044, CD045, CD046 .................................................................................................... L-112

3.18.8 CD047, CD048, CD049, CD04A, CD04B................................................................................................................. L-112

3.18.9 CD050 ...................................................................................................................................................................... L-113

3.18.10 CD110 .....................................................................................................................................................................L-113

3.18.11 CD201, CD202, CD203...........................................................................................................................................L-113

3.18.12 CD211, CD212 ........................................................................................................................................................L-113

3.18.13 CD241, CD242 ........................................................................................................................................................L-114

3.18.14 CD252 .....................................................................................................................................................................L-114

3.18.15 CD261 .....................................................................................................................................................................L-114

3.18.16 CD262 .....................................................................................................................................................................L-115

3.18.17 CD2D1.....................................................................................................................................................................L-115

3.18.18 CD3## .....................................................................................................................................................................L-115

3.18.19 CD313 .....................................................................................................................................................................L-115

3.18.20 CD38E.....................................................................................................................................................................L-116

3.18.21 CD390 .....................................................................................................................................................................L-116

3.18.22 CD391 .....................................................................................................................................................................L-116

3.18.23 CD392 .....................................................................................................................................................................L-117

3.18.24 CD3A0.....................................................................................................................................................................L-117

3.18.25 CD3B1, CD3B3, CD3B4, CD3B5 ............................................................................................................................L-117

3.18.26 CD3C0.....................................................................................................................................................................L-117

3.18.27 CD401, CD402, CD403, CD404, CD405, CD406, CD407, CD411, CD412, CD413 ..............................................L-118

3.18.28 CD601, CD602, CD603...........................................................................................................................................L-118

xxi

Page 23

3.18.29 CD701, CD702, CD703...........................................................................................................................................L-118

3.18.30 CD704 .....................................................................................................................................................................L-119

3.18.31 CDC##.....................................................................................................................................................................L-119

3.18.32 CDF50, CDF70, CDFA0..........................................................................................................................................L-119

3.18.33 CDF51, CDF71, CDFA1..........................................................................................................................................L-119

3.19 CE###................................................................................................................................................................................ L-120

3.19.1 CE001, CE003, CE004, CE005, CE006, CE007, CE009......................................................................................... L-120

3.19.2 CE002....................................................................................................................................................................... L-120

3.19.3 CE013....................................................................................................................................................................... L-120

3.19.4 CE014....................................................................................................................................................................... L-120

3.19.5 CE101....................................................................................................................................................................... L-121

3.19.6 CE201....................................................................................................................................................................... L-121

3.19.7 CE202....................................................................................................................................................................... L-121

3.19.8 CE203....................................................................................................................................................................... L-121

3.19.9 CE301, CE302, CE303, CE304, CE305................................................................................................................... L-122

3.19.10 CE401 .....................................................................................................................................................................L-122

3.19.11 CED01.....................................................................................................................................................................L-122

3.19.12 CEEE1, CEEE3.......................................................................................................................................................L-122

3.19.13 CEEE2.....................................................................................................................................................................L-123

3.20 CF### (Abort code) ........................................................................................................................................................... L-123

3.20.1 CFA1# ...................................................................................................................................................................... L-123

3.20.2 CFB0# - CFB2# ........................................................................................................................................................ L-123

3.20.3 CFB3# ...................................................................................................................................................................... L-124

3.20.4 CFB4# ...................................................................................................................................................................... L-124

3.20.5 CFB5# ...................................................................................................................................................................... L-124

3.20.6 CFB6# - CFB8# ........................................................................................................................................................ L-124

3.20.7 CFBB# - CFBC# ....................................................................................................................................................... L-125

3.20.8 CFBD# - CFBE# ....................................................................................................................................................... L-125

3.20.9 CFBF# - CFC3#........................................................................................................................................................ L-125

3.20.10 CFC4# .....................................................................................................................................................................L-126

3.20.11 CFC5# - CFC6# ......................................................................................................................................................L-126

3.20.12 CFC7# .....................................................................................................................................................................L-126

3.20.13 CFC8# - CFCE# ......................................................................................................................................................L-126

3.20.14 CFD1# - CFD3# ......................................................................................................................................................L-127

3.20.15 CFD4# - CFD5# ......................................................................................................................................................L-127

3.20.16 CFD6# .....................................................................................................................................................................L-127

3.20.17 CFD7# - CFD9# ......................................................................................................................................................L-128

3.20.18 CFDA# - CFDB#......................................................................................................................................................L-128

3.20.19 CFDC# - CFDF#......................................................................................................................................................L-128

3.20.20 CFE1# - CFE2#.......................................................................................................................................................L-128

3.20.21 CFE3# .....................................................................................................................................................................L-129

3.20.22 CFE4# - CFE6#.......................................................................................................................................................L-129

3.20.23 CFE7# .....................................................................................................................................................................L-129

3.20.24 CFE8# .....................................................................................................................................................................L-130

3.20.25 CFE9# .....................................................................................................................................................................L-130

3.20.26 CFEA# - CFEC#......................................................................................................................................................L-130

3.20.27 CFEE# - CFEF# ......................................................................................................................................................L-130

3.20.28 CFF0# .....................................................................................................................................................................L-131

3.20.29 CFF1# - CFF3# .......................................................................................................................................................L-131

3.20.30 CFF4# .....................................................................................................................................................................L-131

3.20.31 CFF5# .....................................................................................................................................................................L-132

3.20.32 CFF6# .....................................................................................................................................................................L-132

3.20.33 CFF7# - CFF9# .......................................................................................................................................................L-132

3.20.34 CFFB# - CFFC# ......................................................................................................................................................L-132

3.20.35 CFFD#.....................................................................................................................................................................L-133

3.20.36 CFFE# - CFFF#.......................................................................................................................................................L-133

4. TROUBLESHOOTING USING SELF-DIAG. (FULL) ............................................................................................ L-134

4.1 Overview of Self-diag. (Full) function ................................................................................................................................... L-134

4.2 Self-diag. (Full) Procedure ................................................................................................................................................... L-134

4.2.1 Auto Execution of Self-diag. (Full) .............................................................................................................................. L-134

4.2.2 Error code resetting procedures ................................................................................................................................. L-134

4.3 Error Code List..................................................................................................................................................................... L-135

4.4 E1-1 .....................................................................................................................................................................................L-136

4.5 E1-2 .....................................................................................................................................................................................L-136

4.6 E1-3 .....................................................................................................................................................................................L-137

4.7 E1-4 .....................................................................................................................................................................................L-137

4.8 E1-5 .....................................................................................................................................................................................L-137

xxii

Page 24

4.9 E2-1 .....................................................................................................................................................................................L-137

4.10 E2-2 ................................................................................................................................................................................... L-137

4.11 E2-3 ................................................................................................................................................................................... L-138

4.12 E2-4 ................................................................................................................................................................................... L-138

4.13 E2-5 ................................................................................................................................................................................... L-138

4.14 E3-1 ................................................................................................................................................................................... L-138

4.15 E3-2, E3-3 ......................................................................................................................................................................... L-139

4.16 E4-1, E4-2 ......................................................................................................................................................................... L-139

4.17 E4-3, E4-4 ......................................................................................................................................................................... L-139

4.18 E5-1 ................................................................................................................................................................................... L-139

4.19 E5-2 ................................................................................................................................................................................... L-140

4.20 E5-3 ................................................................................................................................................................................... L-140

4.21 E5-4 ................................................................................................................................................................................... L-140

4.22 E5-5 ................................................................................................................................................................................... L-140

4.23 E5-6, E5-7, E5-8, E5-9, E5-10........................................................................................................................................... L-141

4.24 E5-11 ................................................................................................................................................................................. L-141

4.25 E5-12 ................................................................................................................................................................................. L-141

4.26 E6-1, E6-2 ......................................................................................................................................................................... L-142

4.27 E7-1, E7-2 ......................................................................................................................................................................... L-142

4.28 E8-1 ................................................................................................................................................................................... L-143

4.29 E9-1 ................................................................................................................................................................................... L-143

4.30 E10-1, E10-2 ..................................................................................................................................................................... L-143

4.31 E11-1, E11-2 ..................................................................................................................................................................... L-143

4.32 E12-1, E12-2, E12-3, E12-4 .............................................................................................................................................. L-144

5. TROUBLESHOOTING WHEN NG IS DISPLAYED ON THE SELF-DIAG. (INDIVIDUAL) .................................. L-145

5.1 I2S check ............................................................................................................................................................................. L-145

5.1.1 Troubleshooting when NG is displayed for AUDIO (voice)......................................................................................... L-145

5.2 Various USB Check ............................................................................................................................................................. L-145

5.2.1 Troubleshooting when NG is displayed for Keyboard ................................................................................................ L-145

5.2.2 Troubleshooting when NG is displayed for USB Memory .......................................................................................... L-145

5.3 CPU board check................................................................................................................................................................. L-145

5.3.1 Troubleshooting when NG is displayed for Ping Test ................................................................................................ L-145

6. ERROR CODE FOR THE INTERNET ISW.......................................................................................................... L-146

6.1 Error code list for the Internet ISW ...................................................................................................................................... L-146

6.2 0x0# ..................................................................................................................................................................................... L-146

6.3 0x1# ..................................................................................................................................................................................... L-147

6.4 0x2# ..................................................................................................................................................................................... L-147

7. CS Remote Care ERROR CODE ......................................................................................................................... L-148

7.1 Troubleshooting for CS Remote Care ................................................................................................................................. L-148

7.2 CS Remote Care Operation under Enhanced Security Mode .............................................................................................L-148

7.3 List of the CS Remote Care error code ............................................................................................................................... L-148

7.3.1 When connecting by modem ...................................................................................................................................... L-148

7.3.2 When connecting by e-mails ...................................................................................................................................... L-149

7.3.3 When connecting by http ............................................................................................................................................ L-151

7.3.4 When connecting by Fax modem ............................................................................................................................... L-153

8. CS Remote Analysis ERROR CODE ................................................................................................................... L-154

8.1 When connecting by SOAP .................................................................................................................................................L-154

8.1.1 1###............................................................................................................................................................................ L-154

8.1.2 2###............................................................................................................................................................................ L-154

8.1.3 3###............................................................................................................................................................................ L-155

8.1.4 4###............................................................................................................................................................................ L-155

8.2 When connecting by http .....................................................................................................................................................L-155

8.2.1 0###............................................................................................................................................................................ L-155

8.2.2 1###............................................................................................................................................................................ L-155

8.2.3 2###............................................................................................................................................................................ L-155

8.2.4 3###............................................................................................................................................................................ L-156

8.2.5 4###............................................................................................................................................................................ L-156

8.2.6 5###............................................................................................................................................................................ L-156

8.2.7 6###............................................................................................................................................................................ L-156

8.2.8 7###............................................................................................................................................................................ L-156

9. FAX TROUBLE CODE ......................................................................................................................................... L-157

9.1 The error in the transmission/reception system ................................................................................................................... L-157

9.2 B0## .................................................................................................................................................................................... L-157

9.3 B11# .................................................................................................................................................................................... L-157

9.4 B12# .................................................................................................................................................................................... L-157

xxiii

Page 25

9.5 B13# .................................................................................................................................................................................... L-158

9.6 B14# .................................................................................................................................................................................... L-158

9.7 B15# .................................................................................................................................................................................... L-158

9.8 B16# .................................................................................................................................................................................... L-158

9.9 B17# .................................................................................................................................................................................... L-158

9.10 B18# .................................................................................................................................................................................. L-159

9.11 B19# .................................................................................................................................................................................. L-159

9.12 T0# .................................................................................................................................................................................... L-159

9.13 T1# .................................................................................................................................................................................... L-160

9.14 T2# .................................................................................................................................................................................... L-161

9.15 T3# .................................................................................................................................................................................... L-161

9.16 T4# .................................................................................................................................................................................... L-162

9.17 T5# .................................................................................................................................................................................... L-163

9.18 T6# .................................................................................................................................................................................... L-163

9.19 T7# .................................................................................................................................................................................... L-164

9.20 T8# .................................................................................................................................................................................... L-164

9.21 T9# .................................................................................................................................................................................... L-166

9.22 R0# .................................................................................................................................................................................... L-166

9.23 R1# .................................................................................................................................................................................... L-168

9.24 R2# .................................................................................................................................................................................... L-168

9.25 R3# .................................................................................................................................................................................... L-170

9.26 R4# .................................................................................................................................................................................... L-170

9.27 R5# .................................................................................................................................................................................... L-170

9.28 R6# .................................................................................................................................................................................... L-171

9.29 R7# .................................................................................................................................................................................... L-171

9.30 R8# .................................................................................................................................................................................... L-172

9.31 R9# .................................................................................................................................................................................... L-172

9.32 Other.................................................................................................................................................................................. L-173

10. DIAGNOSTIC CODES ........................................................................................................................................L-174

10.1 Outline ............................................................................................................................................................................... L-174

10.2 Explanation ........................................................................................................................................................................ L-174

10.2.1 The diagnostic code ................................................................................................................................................. L-174

10.2.2 Information of communication results and conditions............................................................................................... L-174

11. NETWORK FAX ERROR CODE ........................................................................................................................L-175

11.1 Error code list of the transmission system ......................................................................................................................... L-175

11.2 Error code list of the reception system .............................................................................................................................. L-175

12. Open API RELATED TROUBLE.........................................................................................................................L-177

12.1 Outline ............................................................................................................................................................................... L-177

12.2 Types of Trouble................................................................................................................................................................ L-177

12.3 Solution.............................................................................................................................................................................. L-177

12.3.1 When using an application ....................................................................................................................................... L-177

12.3.2 After rewriting the firmware of the machine .............................................................................................................. L-178

13. PANEL BLACKOUT TROUBLE (BOOT DIAGNOSIS FUNCTION)....................................................................L-179

13.1 Boot diagnosis function ..................................................................................................................................................... L-179

13.1.1 Boot diagnosis sequence ......................................................................................................................................... L-179

13.1.2 Manual boot diagnosis procedure ............................................................................................................................ L-180

13.1.3 Boot diagnosis result list........................................................................................................................................... L-180

13.1.4 How to reset the boot diagnosis result ..................................................................................................................... L-180

14. TROUBLES THAT DO NOT DISPLAY THE TROUBLE CODE .........................................................................L-181

14.1 Machine is not energized at all (DCPU operation check) .................................................................................................. L-181

14.2 Fusing heaters do not operate........................................................................................................................................... L-181

14.3 Power is not supplied to option.......................................................................................................................................... L-181

14.3.1 DF-704/DF-629......................................................................................................................................................... L-181

14.3.2 PC-110/PC-115/PC-210/PC-215/PC-410/PC-415 ................................................................................................... L-182

14.3.3 FS-533/FS-534 ......................................................................................................................................................... L-182

14.3.4 FS-536/FS-536SD/FS-537/FS-537SD ..................................................................................................................... L-182

15. OTHER TROUBLE .............................................................................................................................................L-184

15.1 Firmware error warning ..................................................................................................................................................... L-184

15.2 Storage lock password error warning ................................................................................................................................ L-184

16. TROUBLESHOOTING OF i-Option ....................................................................................................................L-185

16.1 Structure of license management ...................................................................................................................................... L-185

16.2 License management information ..................................................................................................................................... L-185

16.3 Error message ................................................................................................................................................................... L-185

16.3.1 License management error....................................................................................................................................... L-185

xxiv

Page 26

17. IMAGE QUALITY PROBLEM .............................................................................................................................L-186

17.1 How to read element data ................................................................................................................................................. L-186

17.1.1 Table Number........................................................................................................................................................... L-186

17.1.2 Level History 1.......................................................................................................................................................... L-188

17.1.3 Level History 2.......................................................................................................................................................... L-188

17.2 Troubleshooting procedure overview ................................................................................................................................ L-189

17.2.1 Test pattern printing.................................................................................................................................................. L-189

17.3 Corrective action procedure .............................................................................................................................................. L-190

17.3.1 Skewed image/Image deviation................................................................................................................................ L-190

17.3.2 White line 1, White band 1, Color line 1, Color band 1............................................................................................. L-192

17.3.3 White line 2, White band 2, Color line 2, Color band 2............................................................................................. L-195

17.3.4 Uneven density 1...................................................................................................................................................... L-197

17.3.5 Uneven density 2...................................................................................................................................................... L-198

17.3.6 Faint image, low image density (ID lowering)........................................................................................................... L-199

17.3.7 Gradation reproduction failure .................................................................................................................................. L-201

17.3.8 Color reproducibility error ......................................................................................................................................... L-202

17.3.9 Incorrect color image registration ............................................................................................................................. L-203

17.3.10 Foggy background...................................................................................................................................................L-204

17.3.11 Void areas, White spots ..........................................................................................................................................L-206

17.3.12 Color spot ................................................................................................................................................................L-208

17.3.13 Blurred image ..........................................................................................................................................................L-209

17.3.14 Back marking...........................................................................................................................................................L-210

17.3.15 Blank copy, Black copy ...........................................................................................................................................L-211

17.3.16 Uneven pitch ...........................................................................................................................................................L-212

17.3.17 Uneven gloss, Rough gloss.....................................................................................................................................L-213

17.3.18 Poor fusing performance, Offset .............................................................................................................................L-214

17.3.19 Brush effect, Image bleeding...................................................................................................................................L-214

17.3.20 Blurred fine lines......................................................................................................................................................L-215

17.3.21 Moire .......................................................................................................................................................................L-216

17.3.22 Distorted image .......................................................................................................................................................L-217

17.3.23 ACS malfunction......................................................................................................................................................L-218

17.3.24 Abnormal image ......................................................................................................................................................L-218

18. IC PROTECTOR .................................................................................................................................................L-220

18.1 Outline ............................................................................................................................................................................... L-220

18.2 IC protector list .................................................................................................................................................................. L-220

18.2.1 bizhub C360i/C300i/C250i........................................................................................................................................ L-220

18.2.2 DF-632...................................................................................................................................................................... L-221

18.2.3 DF-714...................................................................................................................................................................... L-221

18.2.4 JS-506 ...................................................................................................................................................................... L-222

18.2.5 FS-533...................................................................................................................................................................... L-222

18.2.6 PK-519...................................................................................................................................................................... L-222

18.2.7 FS-536/FS-536SD .................................................................................................................................................... L-222

M PARTS/CONNECTOR LAYOUT DRAWING................................................................................. M-1

1. PARTS LAYOUT DRAWING ................................................................................................................................... M-1

1.1 bizhub C360i/C300i/C250i ...................................................................................................................................................... M-1

1.1.1 Scanner section ............................................................................................................................................................. M-1

1.1.2 Front side....................................................................................................................................................................... M-1

1.1.3 Back side ....................................................................................................................................................................... M-3

1.1.4 Left side ......................................................................................................................................................................... M-6

1.1.5 Right side....................................................................................................................................................................... M-6

1.1.6 Manual bypass tray ....................................................................................................................................................... M-7

1.1.7 Tray 1 ............................................................................................................................................................................ M-7

1.1.8 Tray 2 ............................................................................................................................................................................ M-8

1.1.9 Fusing/paper exit section............................................................................................................................................... M-8

1.1.10 Duplex section ............................................................................................................................................................. M-9

1.2 DF-632/SP-501 ....................................................................................................................................................................... M-9

1.3 DF-714/SP-501 ..................................................................................................................................................................... M-10

1.4 PC-116/PC-216 .................................................................................................................................................................... M-12

1.5 PC-416.................................................................................................................................................................................. M-13

1.6 LU-302 .................................................................................................................................................................................. M-14

1.7 JS-506 .................................................................................................................................................................................. M-14

1.8 FS-533 .................................................................................................................................................................................. M-15

1.9 PK-519 .................................................................................................................................................................................. M-16

1.10 RU-513 ............................................................................................................................................................................... M-16

1.11 FS-536/FS-536SD .............................................................................................................................................................. M-17

1.12 FS-536SD saddle section ................................................................................................................................................... M-18

xxv

Page 27

1.13 PK-520................................................................................................................................................................................ M-19

1.14 CU-102 ............................................................................................................................................................................... M-19

2. CONNECTOR LAYOUT DRAWING...................................................................................................................... M-20

2.1 BOARD CONNECTOR LAYOUT DRAWING ....................................................................................................................... M-20

2.1.1 bizhub C360i/C300i/C250i ........................................................................................................................................... M-20

2.1.2 DF-632......................................................................................................................................................................... M-23

2.1.3 DF-714......................................................................................................................................................................... M-24

2.1.4 PC-116 ........................................................................................................................................................................ M-25

2.1.5 PC-216 ........................................................................................................................................................................ M-26

2.1.6 PC-416 ........................................................................................................................................................................ M-27

2.1.7 LU-302 ......................................................................................................................................................................... M-27

2.1.8 JS-506 ......................................................................................................................................................................... M-28

2.1.9 FS-533 ......................................................................................................................................................................... M-28

2.1.10 PK-519....................................................................................................................................................................... M-29

2.1.11 FS-536/FS-536SD ..................................................................................................................................................... M-30

2.1.12 FS-536SD saddle section.......................................................................................................................................... M-30

2.1.13 FK-514 (line 1/2)........................................................................................................................................................ M-30

2.1.14 FK-515 (line 3/4)........................................................................................................................................................ M-31

2.1.15 CU-102 ...................................................................................................................................................................... M-31

2.1.16 SC-509 ...................................................................................................................................................................... M-31

2.1.17 VI-516 ........................................................................................................................................................................ M-31

2.1.18 UK-115 ...................................................................................................................................................................... M-32

2.2 RELAY CONNECTOR LAYOUT DRAWING ........................................................................................................................ M-32

2.2.1 bizhub C360i/C300i/C250i ........................................................................................................................................... M-32

N TIMING CHART..............................................................................................................................N-1

1. bizhub C360i/C300i/C250i ........................................................................................................................................N-1

1.1 Time chart when printing ........................................................................................................................................................ N-1

2. LU-302 ......................................................................................................................................................................N-2

3. FS-536/FS-536SD ....................................................................................................................................................N-3

3.1 Shift mode............................................................................................................................................................................... N-3

3.2 Center staples mode............................................................................................................................................................... N-3

O WIRING DIAGRAM ....................................................................................................................... O-1

1. bizhub C360i/C300i/C250i ........................................................................................................................................O-1

1.1 Main body ............................................................................................................................................................................... O-1

2. Option .......................................................................................................................................................................O-2

2.1 DF-632 .................................................................................................................................................................................... O-2

2.2 DF-714 .................................................................................................................................................................................... O-3

2.3 PC-116.................................................................................................................................................................................... O-4

2.4 PC-216.................................................................................................................................................................................... O-5

2.5 PC-416.................................................................................................................................................................................... O-6

2.6 LU-302 .................................................................................................................................................................................... O-7

2.7 JS-506 .................................................................................................................................................................................... O-8

2.8 FS-533 .................................................................................................................................................................................... O-9

2.9 FS-536/FS-536SD ................................................................................................................................................................ O-10

P THEORY OF OPERATION ............................................................................................................P-1

1. bizhub C360i/C300i/C250i ........................................................................................................................................P-1

1.1 INTERFACE SECTION ...........................................................................................................................................................P-1

1.1.1 Configuration ..................................................................................................................................................................P-1

1.2 SCANNER SECTION ..............................................................................................................................................................P-2

1.2.1 Configuration ..................................................................................................................................................................P-2

1.2.2 Drive ...............................................................................................................................................................................P-3

1.2.3 LED exposure unit ..........................................................................................................................................................P-3

1.2.4 When the power is ON ...................................................................................................................................................P-3

1.2.5 Control when the Start key is pressed ............................................................................................................................P-4

1.2.6 Original scanning area.................................................................................................................................................... P-5

1.2.7 Original size detection control ........................................................................................................................................P-6

1.3 WRITE SECTION (PH SECTION) ...........................................................................................................................................P-7

1.3.1 Configuration ..................................................................................................................................................................P-7

1.3.2 Overview......................................................................................................................................................................... P-8

1.3.3 Laser exposure process .................................................................................................................................................P-8

1.3.4 Laser emission timing .....................................................................................................................................................P-9

xxvi

Page 28

1.3.5 Laser emission stop...................................................................................................................................................... P-10

1.3.6 Laser emission area .....................................................................................................................................................P-10

1.3.7 Color registration control (color shift correction) system ..............................................................................................P-10

1.3.8 Color skew correction control .......................................................................................................................................P-13

1.3.9 Skew adjustment/skew adjustment reset .....................................................................................................................P-14

1.3.10 PH unit temperature detection control ........................................................................................................................ P-14

1.3.11 PH window cleaning ................................................................................................................................................... P-14

1.4 PHOTOCONDUCTOR SECTION..........................................................................................................................................P-15

1.4.1 Configuration ................................................................................................................................................................P-15

1.4.2 Drive .............................................................................................................................................................................P-16

1.4.3 Erase LED control ........................................................................................................................................................P-18

1.4.4 Photoconductor cleaning ..............................................................................................................................................P-18

1.4.5 Electrostatic charger control ......................................................................................................................................... P-19

1.4.6 Charging roller cleaning................................................................................................................................................ P-20

1.4.7 Drum unit mounting detection....................................................................................................................................... P-20

1.5 DEVELOPING SECTION ......................................................................................................................................................P-21

1.5.1 Configuration ................................................................................................................................................................P-21

1.5.2 Drive .............................................................................................................................................................................P-21

1.5.3 Developing unit pressure/releases mechanism ............................................................................................................P-22

1.5.4 Developer flow ..............................................................................................................................................................P-22

1.5.5 Auto refining developing system................................................................................................................................... P-23

1.5.6 Developing bias ............................................................................................................................................................P-23

1.5.7 Toner scattering prevention ..........................................................................................................................................P-24

1.5.8 Developing cooling .......................................................................................................................................................P-24

1.5.9 Toner density control ....................................................................................................................................................P-24

1.5.10 Developing unit mounting detection ...........................................................................................................................P-25

1.6 TONER SUPPLY SECTION ..................................................................................................................................................P-26

1.6.1 Configuration ................................................................................................................................................................P-26

1.6.2 Drive .............................................................................................................................................................................P-26

1.6.3 Toner replenishing overview......................................................................................................................................... P-27

1.6.4 Toner replenishing from toner bottle to toner hopper ...................................................................................................P-28

1.6.5 Toner replenishing from toner hopper to developing unit ............................................................................................. P-29

1.6.6 Auxiliary toner replenishing control for toner hopper .................................................................................................... P-30

1.6.7 Auxiliary toner replenishing control for developing unit ................................................................................................P-30

1.6.8 Toner spillage prevention shutter .................................................................................................................................P-31

1.6.9 Toner empty detection control ......................................................................................................................................P-32

1.7 1ST TRANSFER SECTION ...................................................................................................................................................P-34

1.7.1 Configuration ................................................................................................................................................................P-34

1.7.2 Drive .............................................................................................................................................................................P-34

1.7.3 Transfer belt drive......................................................................................................................................................... P-34

1.7.4 1st transfer roller pressure mechanism ........................................................................................................................P-35

1.7.5 Pressure/retraction control by print mode..................................................................................................................... P-35

1.7.6 1st transfer control ........................................................................................................................................................P-37

1.7.7 Transfer belt cleaning ...................................................................................................................................................P-37

1.7.8 Waste toner spillage prevention shutter .......................................................................................................................P-39

1.7.9 Cleaning blade foreign matter removal control .............................................................................................................P-40

1.7.10 Transfer belt new article detection.............................................................................................................................. P-40

1.8 2ND TRANSFER SECTION ..................................................................................................................................................P-40

1.8.1 Configuration ................................................................................................................................................................P-40

1.8.2 Drive .............................................................................................................................................................................P-41

1.8.3 2nd transfer control....................................................................................................................................................... P-41

1.8.4 Control of toner application to 2nd transfer roller .........................................................................................................P-42

1.8.5 2nd transfer roller cleaning ...........................................................................................................................................P-42

1.8.6 Charge neutralization and separation of paper ............................................................................................................P-42

1.8.7 2nd transfer roller new article detection........................................................................................................................ P-43

1.9 TONER COLLECTING SECTION .........................................................................................................................................P-43

1.9.1 Configuration ................................................................................................................................................................P-43

1.9.2 Waste toner box drive mechanism ...............................................................................................................................P-44

1.9.3 Control of waste toner conveyance through waste toner box....................................................................................... P-44

1.9.4 Waste toner box-in-position detection ..........................................................................................................................P-45

1.9.5 Waste toner box full detection ......................................................................................................................................P-46

1.9.6 Waste toner box new article detection.......................................................................................................................... P-46

1.9.7 Waste toner spillage prevention shutter .......................................................................................................................P-46

1.10 PAPER FEED SECTION .....................................................................................................................................................P-47

1.10.1 Configuration .............................................................................................................................................................. P-47

1.10.2 Drive ........................................................................................................................................................................... P-48

1.10.3 Up/down control.......................................................................................................................................................... P-49

1.10.4 Paper feed control ...................................................................................................................................................... P-50

xxvii

Page 29

1.10.5 Paper feed retry control ..............................................................................................................................................P-51

1.10.6 Feed roller speed reduction control ............................................................................................................................ P-51

1.10.7 Vertical transport roller speed reduction control ......................................................................................................... P-51

1.10.8 Paper transport control ...............................................................................................................................................P-52

1.10.9 Downstream exit control during multi-print cycle ........................................................................................................ P-52

1.10.10 Paper size detection control ..................................................................................................................................... P-52

1.10.11 Regulation of trailing edge of small-sized paper ...................................................................................................... P-53

1.10.12 Remaining paper detection control........................................................................................................................... P-54

1.10.13 Paper feed tray locking mechanism ......................................................................................................................... P-55

1.10.14 Roller retract mechanism ......................................................................................................................................... P-56

1.10.15 Paper feed tray stopper release mechanism............................................................................................................ P-57

1.11 PAPER FEED SECTION (MANUAL BYPASS TRAY) ........................................................................................................P-58

1.11.1 Configuration .............................................................................................................................................................. P-58

1.11.2 Drive ........................................................................................................................................................................... P-58

1.11.3 Up/down control.......................................................................................................................................................... P-58

1.11.4 Paper feed control ...................................................................................................................................................... P-60

1.11.5 Paper size detection control ....................................................................................................................................... P-60

1.11.6 Paper empty detection control.................................................................................................................................... P-61

1.11.7 Bypass tray pick-up roller retract mechanism............................................................................................................. P-62

1.12 REGISTRATION SECTION................................................................................................................................................. P-62

1.12.1 Configuration .............................................................................................................................................................. P-62

1.12.2 Registration control..................................................................................................................................................... P-63

1.13 Fusing section .....................................................................................................................................................................P-63

1.13.1 Configuration .............................................................................................................................................................. P-63

1.13.2 Drive ........................................................................................................................................................................... P-64

1.13.3 Fusing speed correction ............................................................................................................................................. P-64

1.13.4 Fusing pressure/retraction control .............................................................................................................................. P-65

1.13.5 Paper separation mechanism..................................................................................................................................... P-66

1.13.6 Fusing temperature control......................................................................................................................................... P-66

1.13.7 Plain paper fusing temperature control....................................................................................................................... P-69

1.13.8 Smart fusing control.................................................................................................................................................... P-69

1.13.9 Protection from abnormal temperatures ..................................................................................................................... P-70

1.13.10 Fusing PPM control .................................................................................................................................................. P-70

1.13.11 Fusing unit new article detection .............................................................................................................................. P-71

1.14 PAPER EXIT/REVERSE SECTION ....................................................................................................................................P-72

1.14.1 Configuration .............................................................................................................................................................. P-72

1.14.2 Drive ........................................................................................................................................................................... P-72

1.14.3 Transport control ........................................................................................................................................................P-72

1.15 DUPLEX SECTION .............................................................................................................................................................P-74

1.15.1 Configuration .............................................................................................................................................................. P-74

1.15.2 Drive ........................................................................................................................................................................... P-75

1.15.3 Paper transport control ...............................................................................................................................................P-75

1.15.4 Duplex circulation control ...........................................................................................................................................P-76

1.16 IMAGE STABILIZATION CONTROL ...................................................................................................................................P-77

1.16.1 Overview..................................................................................................................................................................... P-77

1.16.2 Description of control.................................................................................................................................................. P-78

1.16.3 Control contents .........................................................................................................................................................P-79

1.16.4 Operation timing ......................................................................................................................................................... P-79

1.17 IMAGE PROCESSING ........................................................................................................................................................ P-83

1.17.1 Scanner section image processing block diagram ..................................................................................................... P-83

1.17.2 Write section image processing block diagram .......................................................................................................... P-84

1.18 POWER SUPPLY SECTION ...............................................................................................................................................P-85

1.18.1 Main power switch ...................................................................................................................................................... P-85

1.18.2 Power key................................................................................................................................................................... P-87

1.19 FAN CONTROL ...................................................................................................................................................................P-88

1.19.1 Configuration .............................................................................................................................................................. P-88

1.19.2 Control ........................................................................................................................................................................P-89

1.19.3 PH/power supply cooling fan ......................................................................................................................................P-89

1.19.4 Transfer belt cleaner cooling fan ................................................................................................................................ P-89

1.19.5 Rear side cooling fan.................................................................................................................................................. P-90

1.19.6 Toner cartridge cooling fan......................................................................................................................................... P-90

1.19.7 Paper cooling fan........................................................................................................................................................ P-91

1.20 COUNTER CONTROL ........................................................................................................................................................P-93

1.20.1 Configuration .............................................................................................................................................................. P-93

1.20.2 Operation.................................................................................................................................................................... P-93

1.21 HEATER .............................................................................................................................................................................. P-93

1.21.1 HT-509/MK-734 ..........................................................................................................................................................P-93

1.21.2 LU/TK-101 .................................................................................................................................................................. P-94

xxviii

Page 30

1.22 INDICATOR FUNCTION .....................................................................................................................................................P-95

1.22.1 Configuration .............................................................................................................................................................. P-95

1.22.2 Control ........................................................................................................................................................................P-96

2. DF-632....................................................................................................................................................................P-98

2.1 CONFIGURATION.................................................................................................................................................................P-98

2.1.1 Section configuration ....................................................................................................................................................P-98

2.1.2 Main part configuration .................................................................................................................................................P-98

2.2 OVERVIEW ...........................................................................................................................................................................P-99

2.2.1 Paper path ....................................................................................................................................................................P-99

2.2.2 Paper path operation ..................................................................................................................................................P-100

2.3 Document feed section ........................................................................................................................................................P-100

2.3.1 Drive ...........................................................................................................................................................................P-100

2.3.2 Document set/empty detection ...................................................................................................................................P-101

2.3.3 Document size detection mechanism .........................................................................................................................P-101

2.3.4 Pick-up roller up/down control ....................................................................................................................................P-103

2.3.5 Document feed/separation control.............................................................................................................................. P-103

2.3.6 Document separation roller pressure switching mechanism ......................................................................................P-105

2.4 Document registration section .............................................................................................................................................P-105

2.4.1 Drive ...........................................................................................................................................................................P-105

2.4.2 Document registration outline .....................................................................................................................................P-105

2.4.3 Document registration loop formation process ........................................................................................................... P-106

2.5 Document reading section ...................................................................................................................................................P-106

2.5.1 DRIVE......................................................................................................................................................................... P-106

2.5.2 Transport mechanism .................................................................................................................................................P-107

2.5.3 Document reading glass cleaning mechanism ........................................................................................................... P-107

2.5.4 Document reading roll pressure/release control .........................................................................................................P-108

2.5.5 Document reading front guide ....................................................................................................................................P-109

2.6 PAPER EXIT/REVERSE SECTION ....................................................................................................................................P-109

2.6.1 Drive ...........................................................................................................................................................................P-109

2.6.2 Document switchback/exit mechanism....................................................................................................................... P-110

2.6.3 Switching mechanism for document switchback/exit.................................................................................................. P-110

2.6.4 Switchback exit roll pressure/retraction control ..........................................................................................................P-111

2.6.5 Faxed document stamp function ................................................................................................................................P-111

2.7 Open/Close detection section ..............................................................................................................................................P-112

2.7.1 Document exchange detection control .......................................................................................................................P-112

2.7.2 DF open/close detection .............................................................................................................................................P-112

2.8 DF Skew (Front) adjustment mechanism ............................................................................................................................P-112

2.8.1 Hinge on the right side of the machine (front) ............................................................................................................P-112

2.8.2 Hinge on the right side of the machine (rear) .............................................................................................................P-113

2.8.3 Adjustment direction conceptual drawing ...................................................................................................................P-113

3. DF-714..................................................................................................................................................................P-114

3.1 CONFIGURATION...............................................................................................................................................................P-114

3.1.1 Section configuration ..................................................................................................................................................P-114

3.1.2 Main part configuration ...............................................................................................................................................P-114

3.2 Overview ..............................................................................................................................................................................P-115

3.2.1 Paper path ..................................................................................................................................................................P-115

3.2.2 Paper path operation ..................................................................................................................................................P-116

3.3 Document feed section ........................................................................................................................................................P-116

3.3.1 Drive ...........................................................................................................................................................................P-116

3.3.2 Document set/empty detection ...................................................................................................................................P-117

3.3.3 Document size detection mechanism .........................................................................................................................P-117

3.3.4 Pick-up roller up/down control ....................................................................................................................................P-119

3.3.5 Document feed/separation control.............................................................................................................................. P-119

3.3.6 Document separation roller pressure switching mechanism ......................................................................................P-121

3.3.7 Double feed detection................................................................................................................................................. P-121

3.4 Document registration section .............................................................................................................................................P-122

3.4.1 Drive ...........................................................................................................................................................................P-122

3.4.2 Document registration outline .....................................................................................................................................P-122

3.4.3 Document registration loop formation process ........................................................................................................... P-122

3.5 Document reading section ...................................................................................................................................................P-123

3.5.1 DRIVE......................................................................................................................................................................... P-123

3.5.2 Document reading section ..........................................................................................................................................P-123

3.5.3 Document reading roll pressure/release control .........................................................................................................P-124

3.5.4 Document reading front guide ....................................................................................................................................P-124

3.5.5 Document reading glass cleaning mechanism ........................................................................................................... P-125

3.5.6 CIS original reading mechanism................................................................................................................................. P-126

3.5.7 CIS control when power is turned ON ........................................................................................................................P-127

xxix

Page 31

3.5.8 CIS control when the document is loaded ..................................................................................................................P-128

3.5.9 CIS control when the start key is pressed ..................................................................................................................P-128

3.5.10 CIS glass contamination prevention control ............................................................................................................. P-129

3.5.11 CIS cover.................................................................................................................................................................. P-129

3.6 DOCUMENT EXIT SECTION ..............................................................................................................................................P-130

3.6.1 Drive ...........................................................................................................................................................................P-130

3.6.2 Document exit mechanism .........................................................................................................................................P-130

3.6.3 Faxed document stamp function ................................................................................................................................P-130

3.7 OPEN AND CLOSE DETECTION SECTION ......................................................................................................................P-131

3.7.1 Document exchange detection control .......................................................................................................................P-131

3.7.2 DF open/close detection .............................................................................................................................................P-131

3.8 Cooling inside the unit mechanism ......................................................................................................................................P-131

3.9 DF skew adjustment mechanism .........................................................................................................................................P-132

3.9.1 DF Skew (Front) adjustment mechanism ...................................................................................................................P-132

3.9.2 DF Skew(Back) adjustment mechanism..................................................................................................................... P-133

4. PC-116/PC-216 ....................................................................................................................................................P-135

4.1 CONFIGURATION...............................................................................................................................................................P-135

4.2 PAPER PATH ......................................................................................................................................................................P-135

4.3 DRIVE ..................................................................................................................................................................................P-135

4.4 Paper feed section ...............................................................................................................................................................P-136

4.4.1 Paper feed drive mechanism ......................................................................................................................................P-136

4.4.2 Roller retract mechanism............................................................................................................................................ P-136

4.4.3 Paper lifting motion .....................................................................................................................................................P-137

4.5 Paper feed tray section ........................................................................................................................................................P-138

4.5.1 Paper size detection ...................................................................................................................................................P-138

4.5.2 Paper feed tray locking mechanism ...........................................................................................................................P-139

4.5.3 Paper feed tray stopper release mechanism ..............................................................................................................P-139

4.5.4 Remaining paper display mechanism......................................................................................................................... P-140

5. PC-416 .................................................................................................................................................................P-141

5.1 CONFIGURATION...............................................................................................................................................................P-141

5.2 PAPER PATH ......................................................................................................................................................................P-141

5.3 DRIVE ..................................................................................................................................................................................P-142

5.4 Paper feed section ...............................................................................................................................................................P-142

5.4.1 Paper feed drive mechanism ......................................................................................................................................P-142

5.4.2 Roller retract mechanism............................................................................................................................................ P-143

5.5 Main tray section..................................................................................................................................................................P-143

5.5.1 Main tray up / down mechanism .................................................................................................................................P-143

5.5.2 Main tray lower limit detection ....................................................................................................................................P-144

5.6 Sub tray section ...................................................................................................................................................................P-145

5.6.1 Shifter drive mechanism .............................................................................................................................................P-145

5.6.2 Sub tray paper remaining amount ..............................................................................................................................P-145

5.7 Remaining paper display mechanism ..................................................................................................................................P-145

5.7.1 Display state ...............................................................................................................................................................P-146

6. LU-302 ..................................................................................................................................................................P-147

6.1 CONFIGURATION...............................................................................................................................................................P-147

6.1.1 Section configuration ..................................................................................................................................................P-147

6.1.2 Paper path ..................................................................................................................................................................P-147

6.1.3 Main part configuration ...............................................................................................................................................P-147

6.2 DRIVE ..................................................................................................................................................................................P-149

6.2.1 Paper feed transport drive ..........................................................................................................................................P-149

6.2.2 Paper lift-up drive .......................................................................................................................................................P-149

6.3 Unit open/close section........................................................................................................................................................P-150

6.3.1 Unit lock mechanism ..................................................................................................................................................P-150

6.3.2 LU door open/close detection mechanism .................................................................................................................P-150

6.4 Paper storage section ..........................................................................................................................................................P-151

6.4.1 Paper tray lifting mechanism ......................................................................................................................................P-151

6.4.2 Paper tray lift-up drive release mechanism ................................................................................................................P-153

6.4.3 Paper size detection ...................................................................................................................................................P-154

6.5 Paper feed/transport section................................................................................................................................................P-154

6.5.1 Paper feed control ......................................................................................................................................................P-154

6.5.2 Paper transport control ...............................................................................................................................................P-155

6.5.3 Remaining paper level detection ................................................................................................................................P-156

6.5.4 Paper empty detection................................................................................................................................................ P-157

6.5.5 Remaining paper display ............................................................................................................................................P-158

7. JS-506 ..................................................................................................................................................................P-159

7.1 CONFIGURATION...............................................................................................................................................................P-159

xxx

Page 32

7.1.1 Section configuration ..................................................................................................................................................P-159

7.1.2 Main part configuration ...............................................................................................................................................P-159

7.2 PAPER PATH ......................................................................................................................................................................P-160

7.2.1 Paper feed to the exit tray ..........................................................................................................................................P-160

7.3 DRIVE ..................................................................................................................................................................................P-160

7.3.1 Paper transport drive mechanism for exit tray 1 .........................................................................................................P-160

7.3.2 Paper transport drive mechanism for exit tray 2 .........................................................................................................P-160

7.3.3 Exit tray 2 shift drive mechanism ................................................................................................................................P-160

7.4 Exit tray 1 .............................................................................................................................................................................P-161

7.4.1 Paper transport ...........................................................................................................................................................P-161

7.4.2 Paper full detection .....................................................................................................................................................P-161

7.5 Exit tray 2 .............................................................................................................................................................................P-162

7.5.1 Paper transport ...........................................................................................................................................................P-162

7.5.2 Paper shift mechanism ...............................................................................................................................................P-163

7.5.3 Paper full detection .....................................................................................................................................................P-164

8. FS-533/PK-519 .....................................................................................................................................................P-165

8.1 CONFIGURATION...............................................................................................................................................................P-165

8.1.1 Section configuration ..................................................................................................................................................P-165

8.2 PAPER PATH ......................................................................................................................................................................P-165

8.2.1 No offset/No staple/Punch mode ................................................................................................................................P-165

8.2.2 Offset/Staple/Punch mode.......................................................................................................................................... P-166

8.3 Finisher section....................................................................................................................................................................P-166

8.3.1 Unit lock mechanism ..................................................................................................................................................P-166

8.4 TRANSPORT SECTION......................................................................................................................................................P-167

8.4.1 Configuration ..............................................................................................................................................................P-167

8.4.2 Drive ...........................................................................................................................................................................P-167

8.4.3 Paper conveyance/receiving roller section paper transport control............................................................................P-168

8.4.4 Paper exit roller section paper transport control .........................................................................................................P-169

8.4.5 Paper exit roller up/down control ................................................................................................................................P-170

8.4.6 Paper exit roller/lower drive connecting control ..........................................................................................................P-171

8.4.7 Paper exit paddle control ............................................................................................................................................P-172

8.5 ALIGNMENT SECTION .......................................................................................................................................................P-173

8.5.1 Configuration ..............................................................................................................................................................P-173

8.5.2 Drive ...........................................................................................................................................................................P-174

8.5.3 Paper FD alignment control ........................................................................................................................................P-175

8.5.4 Paper CD alignment control .......................................................................................................................................P-176

8.5.5 Alignment tray paper detect control ............................................................................................................................P-178

8.6 STAPLER SECTION ...........................................................................................................................................................P-178

8.6.1 Configuration/Drive .....................................................................................................................................................P-178

8.6.2 Stapler positioning control ..........................................................................................................................................P-179

8.6.3 Staple control.............................................................................................................................................................. P-179

8.6.4 Staple empty detection control ...................................................................................................................................P-180

8.7 PAPER EXIT TRAY SECTION ............................................................................................................................................P-181

8.7.1 Configuration ..............................................................................................................................................................P-181

8.7.2 Drive ...........................................................................................................................................................................P-181

8.7.3 Paper exit tray lift up control .......................................................................................................................................P-182

8.7.4 Paper level detect control ...........................................................................................................................................P-182

8.8 PK-519 .................................................................................................................................................................................P-183

8.8.1 Configuration ..............................................................................................................................................................P-183

8.8.2 Drive ...........................................................................................................................................................................P-184

8.8.3 Skew correction mechanism....................................................................................................................................... P-185

8.8.4 Punch control.............................................................................................................................................................. P-186

8.8.5 Punch holes switch control .........................................................................................................................................P-187

8.8.6 Punch dust full detection control................................................................................................................................. P-188

9. RU-513 .................................................................................................................................................................P-191

9.1 Configuration .......................................................................................................................................................................P-191

9.2 Drive ....................................................................................................................................................................................P-191

9.3 Paper transport control ........................................................................................................................................................P-192

9.4 RU section door open/close detection mechanism..............................................................................................................P-193

9.5 3rd exit tray full detection mechanism .................................................................................................................................P-193

10. FS-536/FS-536SD/PK-520 ................................................................................................................................ P-195

10.1 CONFIGURATION ............................................................................................................................................................P-195

10.1.1 Section configuration ................................................................................................................................................P-195

10.1.2 Main parts configuration ........................................................................................................................................... P-195

10.2 PAPER PATH ....................................................................................................................................................................P-197

10.2.1 Paper path (FS-536SD/PK-520)............................................................................................................................... P-197

xxxi

Page 33

10.3 FINISHER SECTION .........................................................................................................................................................P-197

10.3.1 Door open/close detection mechanism ....................................................................................................................P-197

10.4 TRANSPORT SECTION ...................................................................................................................................................P-199

10.4.1 Configuration ............................................................................................................................................................ P-199

10.4.2 Drive ......................................................................................................................................................................... P-199

10.4.3 Paper path switching mechanism............................................................................................................................. P-199

10.4.4 Receiving roller section up/down function ................................................................................................................ P-200

10.4.5 Buffer control ............................................................................................................................................................ P-201

10.4.6 Sub tray exit mechanism .......................................................................................................................................... P-201

10.5 ALIGNMENT SECTION..................................................................................................................................................... P-202

10.5.1 Configuration ............................................................................................................................................................ P-202

10.5.2 Drive ......................................................................................................................................................................... P-204

10.5.3 Paper transport control to alignment section ............................................................................................................P-205

10.5.4 Paper alignment control............................................................................................................................................ P-205

10.5.5 Paper exit control...................................................................................................................................................... P-207

10.6 STAPLER SECTION .........................................................................................................................................................P-208

10.6.1 Configuration ............................................................................................................................................................ P-208

10.6.2 Drive ......................................................................................................................................................................... P-209

10.6.3 Stapler movement control......................................................................................................................................... P-209

10.6.4 Staple control............................................................................................................................................................ P-210

10.6.5 Staple empty detection control ................................................................................................................................. P-210

10.7 OUTPUT TRAY SECTION ................................................................................................................................................P-212

10.7.1 Configuration ............................................................................................................................................................ P-212

10.7.2 Drive ......................................................................................................................................................................... P-212

10.7.3 Main tray up/down mechanism................................................................................................................................. P-212

10.7.4 Main tray upper detection mechanism...................................................................................................................... P-214

10.7.5 Main tray paper level detection control..................................................................................................................... P-214

10.7.6 Tray full detection mechanism.................................................................................................................................. P-215

10.8 SADDLE SECTION (FS-536SD) ....................................................................................................................................... P-216

10.8.1 Configuration ............................................................................................................................................................ P-216

10.8.2 Transport section...................................................................................................................................................... P-218

10.8.3 Alignment section ..................................................................................................................................................... P-220

10.8.4 Stapler ...................................................................................................................................................................... P-222

10.8.5 Folding/Saddle stitching ...........................................................................................................................................P-224

10.8.6 Tri-folding.................................................................................................................................................................. P-226

10.8.7 Exit section ............................................................................................................................................................... P-227

10.9 PK-520............................................................................................................................................................................... P-229

10.9.1 Configuration ............................................................................................................................................................ P-229

10.9.2 Drive ......................................................................................................................................................................... P-230

10.9.3 Skew correction control ............................................................................................................................................ P-230

10.9.4 Punch control............................................................................................................................................................ P-230

10.9.5 Puncher up/down status detection configuration...................................................................................................... P-232

10.9.6 Punch dust box full detection mechanism ................................................................................................................ P-232

10.9.7 Punch dust box installation detection mechanism.................................................................................................... P-233

11. AU-102 ............................................................................................................................................................... P-234

11.1 Configuration .....................................................................................................................................................................P-234

11.2 Operation ...........................................................................................................................................................................P-234

12. AU-201S ............................................................................................................................................................ P-235

12.1 Configuration .....................................................................................................................................................................P-235

12.2 Operation ...........................................................................................................................................................................P-235

12.3 Specifications ....................................................................................................................................................................P-235

13. EK-608/EK-609 .................................................................................................................................................. P-236

13.1 EK-608............................................................................................................................................................................... P-236

13.1.1 Configuration ............................................................................................................................................................ P-236

13.1.2 Operation.................................................................................................................................................................. P-236

13.2 EK-609............................................................................................................................................................................... P-236

13.2.1 Configuration ............................................................................................................................................................ P-236

13.2.2 Operation.................................................................................................................................................................. P-236

14. SC-509 ............................................................................................................................................................... P-238

14.1 Configuration .....................................................................................................................................................................P-238

14.2 Operation ...........................................................................................................................................................................P-238

15. UK-221 ............................................................................................................................................................... P-239

15.1 CONFIGURATION ............................................................................................................................................................P-239

15.1.1 Mounting position .....................................................................................................................................................P-239

15.2 OPERATION .....................................................................................................................................................................P-239

xxxii

Page 34

15.2.1 Outline ...................................................................................................................................................................... P-239

15.2.2 2nd network interface structure ................................................................................................................................ P-240

15.2.3 Operation on ErP Auto Power Off mode ..................................................................................................................P-242

16. FK-514/FK-515/MK-742..................................................................................................................................... P-246

16.1 COMMUNICATION CONTROL .........................................................................................................................................P-246

16.1.1 FIF bits of DIS, DTC and DCS.................................................................................................................................. P-246

16.1.2 Modem fallback sequence........................................................................................................................................ P-254

16.1.3 V8/V34 sequence ..................................................................................................................................................... P-254

16.2 FUNCTION ........................................................................................................................................................................ P-262

16.2.1 Telephone function ...................................................................................................................................................P-262

16.2.2 F-code ......................................................................................................................................................................P-263

16.2.3 Transmission function............................................................................................................................................... P-267

16.2.4 Reception function.................................................................................................................................................... P-267

17. CU-102............................................................................................................................................................... P-270

17.1 CONFIGURATION ............................................................................................................................................................P-270

17.2 OPERATION .....................................................................................................................................................................P-270

17.2.1 Exhaust control......................................................................................................................................................... P-270

17.2.2 Filter configuration ....................................................................................................................................................P-271

17.2.3 Airflow....................................................................................................................................................................... P-271

17.2.4 Operation timing ....................................................................................................................................................... P-271

xxxiii

Page 35

bizhub C360i/C300i/C250i Revision List

Revision List

No. Title Description of revision Date

1 Issue of the first edition

2 Software SW setting for CS Remote Care

Correction of the missing explanation.

2019/02/12

2019/04/22

-1

Page 36

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS

ASAFETY AND IMPORTANT WARNING ITEMS

Read carefully the safety and important warning items described below to understand them before doing service work.

A-1

Page 37

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 1. IMPORTANT NOTICE

1.IMPORTANT NOTICE

▪ Because of possible hazards to an inexperienced person servicing this product as well as

the risk of damage to the product, KONICA MINOLTA, INC. (hereafter called KM) strongly recommends that all servicing be performed only by KM-trained service technicians.

▪ Changes may have been made to this product to improve its performance after this Service

Manual was printed. Accordingly, KM does not warrant, either explicitly or implicitly, that the information contained in this service manual is complete and accurate.

▪ The user of this service manual must assume all risks of personal injury and/or damage to

the product while servicing the product for which this service manual is intended. Therefore, this service manual must be carefully read before doing service work both in the course of technical training and even after that, for performing maintenance and control of the product properly. Keep this service manual also for future service.

▪ Distributors or KM issue password for customer engineers (CE) as necessary. The password

is required for operations or machine settings that are based on this service manual. These customer engineers (CE) must manage the password carefully. Never leak the password to a third party.

A-2

Page 38

A SAFETY AND IMPORTANT WARNING ITEMS > 2. DESCRIPTION ITEMS FOR

bizhub C360i/C300i/C250i

DANGER, WARNING AND CAUTION

2.DESCRIPTION ITEMS FOR DANGER, WARNING AND CAUTION

2.1Description items in this Service Manual

In this Service Manual, each of three expressions “ CAUTION” are defined as follows. When servicing the product, the relevant works (disassembling, reassembling, adjustment, repair, maintenance, etc.) need to be conducted with utmost care.

DANGER

WARNING

CAUTION

DANGER”, “ WARNING”, and “

: Action having a high possibility of suffering death or serious injury

: Action having a possibility of suffering death or serious injury

: Action having a possibility of suffering a slight wound and property damage

2.2Description items for safety and important warning items

Symbols used for safety and important warning items are defined as follows:

: Precaution when servicing the product.

General

precaution

: Prohibition when servicing the product.

General

prohibition

: Direction when servicing the product.

General

instruction

Electric hazard

Do not touch with

wet hand

Unplug Ground/Earth

High temperature

Do not

disassemble

Illustrations representing the power plug and wall outlet used in the following descriptions are only typical. Their shapes differ depending on the country or region.

A-3

Page 39

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

3.SAFETY WARNINGS

3.1MODIFICATIONS NOT AUTHORIZED BY KONICA MINOLTA, INC.

KONICA MINOLTA brand products are renowned for their high reliability. This reliability is achieved through high-quality design and a solid service network. Product design is a highly complicated and delicate process where numerous mechanical, physical, and electrical aspects have to be taken into consideration, with the aim of arriving at proper tolerances and safety factors. For this reason, unauthorized modifications involve a high risk of degradation in performance and safety. Such modifications are therefore strictly prohibited. the points listed below are not exhaustive, but they illustrate the reasoning behind this policy.

3.1.1Actions requiring special attention

WARNING

▪ Do not make any modifications to the product

unless otherwise instructed by KM.

▪ Do not use any part not specified by KM.

▪ Do not use any power cord or power plug not

specified by KM.

▪ Use only the protective fuses specified by KM.

Use of any type of fuse or related part not specified by KM makes safety devices inoperative which may result in a fire from high heat.

▪ Do not disable fuse functions or use a wire,

metal clip, solder, or other conductor in place of the fuse.

Fire may result from high heat.

▪ Do not disable relay functions (for example,

inserting a piece of paper between relay contacts to hamper circuit action.)

Fire may result from high heat.

A-4

Page 40

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

WARNING

▪ Do not disable safety functions (for example,

interlocks and safety circuits).

Safety devices become inoperative, resulting in fire from high heat, electric shock, or injury.

3.2POWER PLUG SELECTION

In some countries or areas, the power plug provided with the product may not fit the wall outlet used in the area. In that case, it is the obligation of the customer engineer (hereafter called the CE) to attach the appropriate power plug or power cord set in order to connect the product to the supply.

3.2.1Power Cord Set or Power Plug

WARNING

▪ Use a power supply cord set which meets the

following criteria:

• provided with a plug having configuration intended for the connection to wall outlet appropriate for the product's rated voltage and current, and

• the plug has pin/terminal(s) for grounding, and

• provided with three-conductor cable having enough current capacity, and

• the cord set meets regulatory requirements for the area.

Use of inadequate cord set leads to fire or electric shock.

A-5

Page 41

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

Color of the wire Terminal of the plug

Brown

WhiteLight Blue

Black

Green-and-Yellow

Marked with "L", "A" or "W"

or colored RED

Marked with "N"

or colored BLACK

or colored GREEN

or GREEN-AND-YELLOW

Marked with "E", "PE" or " "

WARNING

▪ Attach power plug which meets the following

criteria:

• having configuration intended for the connection to wall outlet appropriate for the product’s rated voltage and current, and

• the plug has pin/terminal(s) for grounding, and

• meets regulatory requirements for the area.

Use of inadequate cord set leads to the product connecting to inadequate power supply (voltage, current capacity, grounding), and may result in fire or electric shock.

▪ The wires in the power supply cord shall be

connected to the terminals of the plug in accordance with the following:

▪ Wrong connection may cancel safeguards

within the product, and results in fire or electric shock.

A-6

Page 42

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

3.3CHECKPOINTS WHEN PERFORMING ON-SITE SERVICE

KONICA MINOLTA brand products are extensively tested before shipping, to ensure that all applicable safety standards are met, in order to protect the customer and customer engineer (hereafter called the CE) from the risk of injury. However, in daily use, any electrical equipment may be subject to parts wear and eventual failure. In order to maintain safety and reliability, the CE must perform regular safety checks.

3.3.1Power Supply (1)Connection to Power Supply

WARNING

▪ The power outlet should have a capacity of at

least the maximum power consumption and be dedicated only to the product.

The current that can be passed through the outlet is limited and any current exceeding the limit could result in fire.

▪ If the wall outlet has two or more receptacles

and the product and another electrical appliance are plugged into this wall outlet, make sure that the total load does not exceed the rating of the wall outlet. The current that can be passed through the outlet is limited and any current exceeding the limit could result in a fire.

A-7

Page 43

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

WARNING

▪ Do not use any conversion plug adapter even

if the power plug shape does not match your wall outlet.

The shapes of the power plug and the wall outlet are set according to the voltage and allowable current. Use of a conversion plug adapter could result in an abnormal voltage or insufficient current capacity, leading to a fire. It may also result in an electric shock due to a grounding failure.

If the plug shape does not match the wall outlet, request the user to perform power source installation work.

▪ Make sure the power cord is plugged into the

wall outlet securely.

If the power plug is left loose in the wall outlet, contact failure may occur, leading to abnormal heating of the power plug and a risk of fire.

(2)Ground Connection

▪ Check whether the product is grounded

properly.

WARNING

If current leakage occurs in an ungrounded product, you may suffer electric shock while operating the product.

Connect power plug to grounded wall outlet.

A-8

Page 44

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

WARNING

▪ Make sure of correct ground connection.

If the grounding wire is connected to an inappropriate part, there is a risk of explosion or electric shock. Do not connect the grounding wire to any of the following parts:

a. Gas pipe: Gas explosion or fire may result.

b. Lightning rod: Risk of electric shock or fire during lightning.

c. Grounding wire for telephone line: Risk of electric shock or fire during lightning.

d. Water pipe and faucet: These parts do not serve as a ground connection because of a plastic part that is very often installed midway within the water pipe.

(3)Power Plug and Cord

▪ When using the power cord set (inlet type)

that came with this product, make sure the connector is securely inserted in the inlet of the product.

When a securing measure is provided,

WARNING

secure the cord with the fixture properly. If the power cord (inlet type) is not

connected to the product securely, a contact problem may lead to increased resistance, overheating, and risk of fire.

A-9

Page 45

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

WARNING

▪ Do not allow the power cord to be stepped on

or pinched.

Overheating may occur there, leading to a risk of fire.

▪ Check whether the power cord is damaged.

Check whether the sheath is damaged.

If the power plug, cord, or sheath is damaged, replace with a new power cord (with plug and connector on each end) specified by KM. Using the damaged power cord may result in fire or electric shock.

▪ Do not bundle or tie the power cord.

Overheating may occur there, leading to a risk of fire.

▪ Check whether dust is collected around the

power plug and wall outlet.

Using the power plug and wall outlet without removing dust may result in fire.

▪ Do not insert the power plug into the wall

outlet with a wet hand.

The risk of electric shock exists.

▪ When unplugging the power cord, grasp the

plug, not the cable.

The cable may be broken, leading to a risk of fire and electric shock.

(4)Wiring

▪ Never use multi-plug adapters to plug multiple

WARNING

power cords in the same outlet.

If used, the risk of fire exists.

A-10

Page 46

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

WARNING

▪ When an extension cord is required, use one

that meets the rated current, rated voltage, and the relevant safety standards of the country.

Current that can be passed through the extension cable is limited and fire may result from the use of an inappropriate type of an extension cable.

Do not use an extension cable reel with the cable taken up. Fire may result.

3.3.2Installation Requirements (1)Prohibited Installation Places

WARNING

▪ Do not place the product near flammable

materials or volatile materials that may catch fire.

A risk of fire exists.

▪ Do not place the product in a place exposed

to water such as rain.

A risk of fire and electric shock exists.

A-11

Page 47

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

(2)When not Using the Product for a long time

WARNING

▪ When the product is not to be used for an

extended period of time (for holidays, for example), instruct the user to turn OFF the power switch and unplug the power cord from the power outlet.

Dust collected around the power plug and outlet may cause fire.

(3)Ventilation

▪ The product generates ozone gas during

operation.

(4)Stability

CAUTION

If the smell of ozone is present in the following cases, ventilate the room.

a. When the product is used in a poorly ventilated room

b. When making a lot of copies c. When using multiple products at the

same time

CAUTION

▪ Be sure to lock the caster stoppers.

In the case of an earthquake, the product may slide, leading to an injury.

A-12

Page 48

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

3.3.3After Service (1)Inspection before Servicing

WARNING

▪ Before conducting an inspection, read all

relevant documentation (service manual, technical notices, etc.) and proceed with the inspection following the prescribed procedure using the recommended personal safety equipment and using only the prescribed tools.

Do not make any adjustment not described in the documentation.

If the prescribed procedure or tool is not used, the product may break and a risk of injury or fire exists.

▪ Before conducting an inspection, be sure to

disconnect the power plugs from the Main Body and Accessories (Options).

When the power plug is inserted into the wall outlet, some units are still powered even if the POWER switch is turned OFF.

A risk of electric shock exists.

CAUTION

▪ The area around the fixing unit is hot.

You may get burned.

A-13

Page 49

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

CAUTION

▪ Do not leave the machine unattended during

transportation, installation, and/or inspection.

If the machine is left unattended, face protrusions toward the wall or take other necessary precautions to prevent a user or other person in the area from stumbling over a protrusion of the machine or being caught by a cable, possibly causing a fall to the floor or other personal injury.

(2)Work Performed with the Product Powered On

WARNING

▪ Take every care when making adjustments or

performing an operation check with the product powered.

If you make adjustments or perform an operation check with the external cover detached, you may touch live or highvoltage parts or you may be caught in moving gears or the timing belt, leading to a risk of injury.

▪ Take every care when servicing with the

external cover detached.

High-voltage exists around the drum unit. A risk of electric shock exists.

▪ If it is absolutely necessary to service the

machine with the door open or external covers removed, always be attentive to the motion of the internal parts.

A normally protected part may cause unexpected hazards.

A-14

Page 50

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

CAUTION

▪ Do not keep gazing at a lamp light during the

service procedure with the product powered ON.

Eyestrain may result.

(3)Safety Checkpoints

WARNING

▪ When a product fault is reported from a user,

check parts and repair the fault appropriately with safety in mind.

A damaged product, personal injury, or fire may result.

▪ Whenever mounting an option on the

machine, be attentive to the motion of the other workers performing the task.

Another worker may be injured by a pinch point between the machine and the option.

▪ When mounting an option on the machine, be

careful about the clearance between the machine and the option.

You may be injured with your finger or hand pinched between the machine and the option.

▪ When removing a part that secures a motor,

gear, or other moving part, disassembling a unit, or reinstalling any of such parts and units, be careful about moving parts and use care not to drop any part or unit. During the service procedure, give sufficient support for any heavy unit.

You may be injured by a falling part or unit.

A-15

Page 51

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

WARNING

▪ Check the external covers and frame for

possible sharp edges, burrs, and damage.

They can be a cause of injury during use or servicing.

▪ When accessing a hard-to-view or narrow

spot, be careful about sharp edges and burrs on the frame and parts.

They may injure your hands or fingers.

▪ Do not allow any metal parts such as clips,

staples, and screws to fall into the product.

They can short internal circuits and cause electric shock or spark bursting into flame.

▪ Check wiring for pinched and any other

damage.

Current can leak, leading to a risk of electric shock or fire.

▪ Check high-voltage cables and sheaths for

any damage.

Damage may lead to product failure and/or the risk of fire.

▪ Do not disassemble or adjust the write unit

(PH unit) incorporating a laser.

The laser light can enter your eye, leading to a risk of loss of eyesight.

▪ Do not supply power with the write unit (PH

unit) shifted from the specified mounting position.

The laser light can enter your eye, leading to a risk of loss of eyesight.

▪ After replacing a part to which AC voltage is

applied (e.g., optical lamp and fixing lamp), be sure to check the installation state.

A risk of fire exists.

A-16

Page 52

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

WARNING

▪ Check the interlock switch and actuator for

loosening and check whether the interlock functions properly.

If the interlock does not function, you may receive an electric shock or be injured when you insert your hand in the product (e.g., for clearing paper jam).

▪ Make sure the wiring cannot come into

contact with sharp edges, burrs, or other pointed parts.

Damage may lead to the risk of electric shock or fire.

▪ Make sure that all screws, components,

wiring, connectors, etc. that were removed for safety check and maintenance have been reinstalled in the original location. (Pay special attention to forgotten connectors, pinched cables, forgotten screws, etc.)

A risk of product trouble, personal injury, electric shock, and fire exists.

▪ Never use any flammable or combustible

spray, fluid, gas, or similar substance in and around the product.

Do not use any flammable or combustible dust spray, in particular, to clean the interior of the product.

Fire or explosion may result.

A-17

Page 53

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

CAUTION

▪ Carefully remove all toner remnants and dust

from electrical parts and electrode units such as a charging corona unit.

Toner remnants and dust may lead to product failure and/or the risk of fire.

▪ Check electrode units such as a charging

corona unit for deterioration and signs of leakage.

Damage may lead to product failure and/or the risk of fire.

▪ When replacing a battery, replace it with a

new one as specified.

Dispose of the used battery as instructed on its packaging or by local ordinance.

There is a risk of explosion if the battery is replaced with an incorrect type.

(4)Handling of Consumables

WARNING

▪ For handling of consumables (toner,

developer, photoconductor, etc.) and their storage precautions, see MSDS.

(5)Handling of Service Materials

CAUTION

▪ Handle with care according to MSDS.

Use of solvent may involve explosion, fire, or personal injury.

A-18

Page 54

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

3.4Used Batteries Precautions

3.4.1ALL Areas

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.

3.4.2Germany

VORSICHT!

Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleichwertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers.

3.4.3France

ATTENTION

Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du même type ou d’un type équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant.

3.4.4Denmark

ADVARSEL!

Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren.

3.4.5Finland, Sweden

VAROlTUS

Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.

VARNING

Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion.

3.4.6Norway

ADVARSEL

Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner.

A-19

Page 55

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

[1]

[2]

3.5Laser Safety

3.5.1Laser Safety

This is a digital machine certified as a Class 1 laser product. There is no possibility of danger from a laser, provided the machine is serviced according to the instruction in this manual.

3.5.2Internal Laser Radiation

▪ This product employs a Class 3B laser diode that emits an invisible laser beam. The laser

diode and the scanning polygon mirror are incorporated in the print head unit.

▪ The print head unit is NOT A FIELD SERVICEABLE ITEM. Therefore, the print head unit

should not be opened under any circumstances.

semiconductor laser

Maximum power of the laser diode bizhub C360i/C300i/C250i 25 mW

Maximum average radiation power (*) bizhub C360i 8.1 μW

bizhub C300i 7.1 μW bizhub C250i 7.1 μW

Wavelength bizhub C360i/C300i/C250i 770-800 nm

*at laser aperture of the Print Head Unit

[1]

Laser Aperture of the Print Head Unit

[2]

Print Head Unit

(1)U.S.A., Canada (CDRH Regulation)

▪ This machine is certified as a Class 1 Laser product under Radiation Performance

Standard according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device does not produce hazardous laser radiation.

▪ The label shown on “

regulations and must be attached to laser products marketed in the United States.

A.3.5.3 Laser Safety Label” indicates compliance with the CDRH

A-20

Page 56

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

WARNING

Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

semiconductor laser Maximum power of the laser diode 25 mW Wavelength 770 to 800 nm

(2)All Areas

WARNING

Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

semiconductor laser Maximum power of the laser diode 25 mW Wavelength 770 to 800 nm

3.5.3Laser Safety Label

A laser safety label is attached to the outside of the machine as shown below.

A-21

Page 57

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

3.5.4Laser Warning Label

A laser warning label is attached to the inside of the machine as shown below.

3.5.5PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT

▪ Be sure to unplug the power cord whenever performing a service job in the laser beam path

(around the PH unit).

▪ If it is absolutely unavoidable to perform a service job with the power cord plugged in, strictly

observe the following precautions:

1. Before starting the service job, take off your watch, ring, and other reflective articles and be sure to wear laser protective goggles.

2. Keep other personnel away from the work site.

3. Do not bring any highly reflective tool into the laser beam path during the service procedure.

A-22

Page 58

A SAFETY AND IMPORTANT WARNING ITEMS > 4. WARNING INDICATIONS ON

Theinsideofthisproducthas

areassubjecttohigh

temperature,whichmaycause

burns.

Whencheckingtheinsideof

theunitformalfunctionssuch

asapapermisfeed,donot

touchthelocations(around

thefusingunit,etc.)whichare

indicatedbya"CautionHOT"

cautionlabel.Aburncould

result.

bizhub C360i/C300i/C250i

THE MACHINE

4.WARNING INDICATIONS ON THE MACHINE

Caution labels shown are attached in some areas on/in the machine. When accessing these areas for maintenance, repair, or adjustment, special care should be taken to avoid burns and electric shock.

4.1Warning indications inside the machine

CAUTION

You may be burned or injured if you touch any area that you are advised not to touch by any caution label. Do not remove caution labels. If any caution label has come off or soiled and therefore the caution cannot be read, contact our service office.

A-23

Page 59

A SAFETY AND IMPORTANT WARNING ITEMS > 4. WARNING INDICATIONS ON

This area generates high voltage. Be careful not to touch here when the power is turned ON to avoid getting an electric shock.

High voltage

bizhub C360i/C300i/C250i

4.2Warning indications on the boards

THE MACHINE

A-24

Page 60

A SAFETY AND IMPORTANT WARNING ITEMS > 5. MEASURES TO TAKE IN CASE

bizhub C360i/C300i/C250i

OF AN ACCIDENT

5.MEASURES TO TAKE IN CASE OF AN ACCIDENT

1. If an accident has occurred, the distributor who has been notified first must immediately take emergency measures to provide relief to affected persons and to prevent further damage.

2. If a report of a serious accident has been received from a customer, an on-site evaluation must be carried out quickly and KM must be notified.

3. To determine the cause of the accident, conditions and materials must be recorded through direct on-site checks, in accordance with instructions issued by KM.

4. For reports and measures concerning serious accidents, follow the regulations specified by every distributor.

A-25

Page 61

B NOTATION OF THE CONTENTS > 1. PRECAUTION ON HANDLING THIS

bizhub C360i/C300i/C250i

BNOTATION OF THE CONTENTS

1.PRECAUTION ON HANDLING THIS MANUAL

CAUTION

▪ Use of this manual should be strictly supervised to avoid disclosure of confidential information.

MANUAL

B-1

Page 62

bizhub C360i/C300i/C250i B NOTATION OF THE CONTENTS > 2. PRODUCT NAME

2.PRODUCT NAME

In this manual, each of the products is described as follows:

1 bizhub C360i/C300i/C250i Main body

2 Microsoft Windows 7 Windows 7

3 Microsoft Windows 8.1 Windows 8.1

4 Microsoft Windows 10 Windows 10

5 When the description is made in combination of the OS’s mentioned

above

Windows 7/8.1/10

B-2

Page 63

bizhub C360i/C300i/C250i B NOTATION OF THE CONTENTS > 3. BRAND NAME

3.BRAND NAME

TRADEMARKS OF OTHER COMPANIES

• The company names and product names mentioned in this manual are the brand name or the registered trademark of each company.

OWN TRADEMARKS

• KONICA MINOLTA, KONICA MINOLTA logo, and bizhub are the registered trademarks of KONICA MINOLTA, INC.

B-3

Page 64

bizhub C360i/C300i/C250i B NOTATION OF THE CONTENTS > 4. FEEDING DIRECTION

4.FEEDING DIRECTION

• When the long side of the paper is parallel with the feeding direction, it is called short edge feeding. The feeding direction which is perpendicular to the short edge feeding is called the long edge feeding.

• Short edge feeding will be identified with [S (abbreviation for Short edge feeding)] on the paper size. No specific notation is added for the long edge feeding. When the size has only the short edge feeding with no long edge feeding, [S] will not be added to the paper size.

Sample notation

Paper size Feeding direction Notation

A4 Long edge feeding A4

Short edge feeding A4S

A3 Short edge feeding A3

B-4

Page 65

bizhub C360i/C300i/C250i B NOTATION OF THE CONTENTS > 5. Note for the Specifications

5.Note for the Specifications

• These specifications are subject to change without notice.

B-5

Page 66

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

CPRODUCT OUTLINE

1.PRODUCT SPECIFICATIONS

1.1bizhub C360i/C300i/C250i

1.1.1Basic specifications

Items Specifications

Type Desktop/console * scanner/printer

Control panel 10.1-inch TFT color LCD WVGA

Printing process Laser electrostatic process copying system

Photoconductor OPC drum: KM-91Dz

Developing system Dry 2 components developing method, HMT developing system

Charging system Roller charging system

Neutralizing system Red LED system

Image transfer system 1st: Belt transfer system, 2nd: roller transfer system

Paper separating system Combination of curvature, separating claws, and bias needle system

Fusing system Upper 2-axis pad pressure fusing

Heating system Halogen lamp

Original scanning Mirror scanning CCD optical system (Sheet through system when DF is used)

Exposure lamp LED light (10W or under)

Scanning resolution Main scan direction: 600 dpi, Sub scan direction: 600 dpi

Original glass Stationary (Mirror scan)

Original alignment Rear left edge

Types of original Sheets, Books, Three-dimensional objects

Max. original size A3 or 11 x 17

Max. original weight Max. 2 kg (4 7/16 lb)

Exposure system 1 beam LD exposure system, and polygon mirror scan system

Exposure resolution Main scan direction: 1200 dpi, Sub scan direction: 1200 dpi

Image loss Copy Leading edge: 4.2 mm (3/16 inches) (Thin Paper: 5 mm (3/16 inches))

Warm-up time (at an ambient temperature of 23° C/73.4° F and rated source voltage) (Period from the time Main Power Switch was turned on to the time this machine is ready for printing.)

First copy time (Tray1, A4 or 8 1/2 x 11, full size)

Copying speed for multi-copy cycle (A4 or 8 1/2 x 11, plain paper)

Process speed bizhub C360i 166.433 mm/s: Plain paper, Plain paper+, Thin paper, Recycled paper,

(When the optional paper feed cabinet/desk is installed)

Electrostatic touch panel (vibration feedback)

Trailing edge: 3 mm (1/8 inches) Rear edge: 3 mm (1/8 inches) Front edge: 3 mm (1/8 inches)

PC print Leading edge: 4.2 mm (3/16 inches)

Trailing edge: 4.2 mm (3/16 inches) Rear edge: 4.2 mm (3/16 inches) Front edge: 4.2 mm (3/16 inches)

bizhub C360i Black: 12 sec. or less

Color: 13 sec. or less

bizhub C300i Black: 11 sec. or less

Color: 13 sec. or less

bizhub C250i Black: 11 sec. or less

Color: 13 sec. or less

bizhub C360i Black: 4.6 sec. or less

Color: 6.1 sec. or less

bizhub C300i Black: 5.0 sec. or less

Color: 6.7 sec. or less

bizhub C250i Black: 5.2 sec. or less

Color: 6.9 sec. or less

bizhub C360i 36 sheets/min. (1-sided), 36 sheets/min. (2-sided)

bizhub C300i 30 sheets/min. (1-sided), 30 sheets/min. (2-sided)

bizhub C250i 25 sheets/min. (1-sided), 25 sheets/min. (2-sided)

OHP film (black mode only)

83.214 mm/s: Thick 1/1+/2/3/4, Special paper, Gloss Mode, 1,200 dpi mode

bizhub C300i 145.843 mm/s: Plain paper, Plain paper+, Thin paper, Recycled paper,

OHP film (black mode only)

83.214 mm/s: Thick 1/1+/2/3/4, Special paper, Gloss Mode, 1,200 dpi mode

bizhub C250i 145.843 mm/s: Plain paper, Plain paper+, Thin paper, Recycled paper,

OHP film (black mode only)

C-1

Page 67

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

Items Specifications

83.214 mm/s: Thick 1/1+/2/3/4, Special paper, Gloss Mode, 1,200 dpi mode

Fixed zoom ratios Full size ×1.000

Reduction ×0.500, ×0.707, ×0.816, ×0.866 (Japan, Europe)

Enlargement ×1.154, ×1.224, ×1.414, ×2.000 (Japan, Europe)

Zoom ratios memory 3 memories

Variable zoom ratios x0.250 to x4.000 in 0.001 increments

Paper feeding separation system Manual bypass tray With pick-up roller

Tray 1/2 Roller separation system with pick-up mechanism

Copy exit tray capacity Plain paper 250 sheets

Thick paper 10 sheets

OHP film 1 sheet

Thin paper 100 sheets

Memory capacity Main memory: 8 GB

Standard storage: 256 GB

External memory function Supported external

memory devices (Possible to be nonoperational products.)

Material Toner cartridge, drum unit, developing unit, waste toner box, transfer belt unit, fusing unit

For details, refer to PERIODICAL MAINTENANCE.

×0.500, ×0.647, ×0.733, ×0.785 (US)

×1.214, ×1.294, ×1.545, ×2.000 (US)

Small roller separation system with torque limiter

USB flash memory compatible with the USB (1.1/2.0) interface FAT32-formatted memory device Not including security features (Possible to turn OFF security features) A USB flash memory that appears as multiple drives on a computer cannot be used.

1.1.2Paper

Type/Size Tray 1 Tray 2 Manual bypass tray

Thin paper (52 to 59 g/m2 (13 13/16 to 15 11/16 lb)) (*1) (*5)

Plain paper (60 to 90 g/m2 (15 15/16 to 23 15/16 lb))

Plain paper+ (91 to 105 g/m2 (24 3/16 to 27 15/16 lb))

Recycled paper (60 to 90 g/m2 (15 15/16 to 23 15/16 lb))

Thick 1 (106 to 120 g/m2 (28 3/16 to 31 15/16 lb))

Thick 1+ (121 to 157 g/m2 (32 3/16 to 41 3/4 lb))

Thick 2 (158 to 209 g/m2 (42 to 55 5/8 lb))

Thick 3 (210 to 256 g/m2 (55 7/8 to 68 1/8 lb)) (*1)

Thick 4 (257 to 300 g/m2 (68 3/8 to 79 13/16 lb)) (*1) (*4)

OHP film (*2) (*3)

Index paper

Label sheet

Postcard 200 sheets

Envelope 70 sheets 10 sheets

Long size paper (127 to 210 g/m2 (33 13/16 to 55 7/8 lb)) (*6)

Translucent paper -

Regular paper size A3 to A6S, Postcard (100 x

148 mm, 3 15/16 x 5 13/16 inches), 16K, 8K 11×17 to 81/2×11, 81/2 ×11S, 51/2×81/2S, 8×13

Custom paper size Width 90 to 297 mm (3 9/16 to 11

11/16 inches)

Length 148 to 431.8 mm (5 13/16 to

17 inches)

500 sheets 500 sheets -

150 sheets

150 sheets 150 sheets 20 sheets

- -

A3 to B5, A5S, A3 Wide, SRA3, 16K, 8K 121/4×18 to 81/2×11, 81/2×11S, 51/2×81/2S, 8×13

139.7 to 320 mm (5 1/2 to 12 5/8 inches)

182 to 457.2 mm (7 3/16 to 18 inches)

A3 to A6S, A3 Wide, SRA3, Postcard (100 × 148 mm, 3 15/16 × 5 13/16 inches), 16K, 8K 121/4×18 to 51/2×81/2, 51/2×81/2S, 4×6S, 8×13

90 to 320 mm (3 9/16 to 12 5/8 inches) (Long size paper: 210 to 297 mm, 8 1/4 to 11 11/16 inches)

139.7 to 1200 mm (5 1/2 to 47 1/4 inches)

C-2

Page 68

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

Type/Size Tray 1 Tray 2 Manual bypass tray

(Long size paper: 457.3 to 1200 mm, 18 to 47 1/4 inches)

• *1: Images are out of guarantee.

• *2: Only for feeding landscape oriented.

• *3: Black print only.

• *4: Only for feeding landscape oriented A4/ Letter paper and A3/ Ledger

• *5: Thin paper smaller than A5 size cannot be conveyed.

• *6: MK-730 is necessary.

NOTE

▪ OHP film, thick 4, envelope, label sheet, index paper and long size paper cannot be fed for duplex printing.

1.1.3Print volume

bizhub C360i

Items Japan North America Europe

Average print volume (prints/ month)

Maximum print volume (prints/ month) (*)

• *: Range of guaranteed performance for paper feeding

bizhub C300i

Items Japan North America Europe

Average print volume (prints/ month)

Maximum print volume (prints/ month) (*)

• *: Range of guaranteed performance for paper feeding

bizhub C250i

Items Japan North America Europe

Average print volume (prints/ month)

Maximum print volume (prints/ month) (*)

• *: Range of guaranteed performance for paper feeding

Color 1,860 2,400 3,080

Black 4,340 3,600 4,620

Color 45,000 61,000 61,000

Black 130,000 114,000 114,000

Color 1,250 1,800 2,600

Black 3,750 2,700 3,900

Color 31,000 51,000 49,000

Black 119,000 99,000 101,000

Color 540 1,400 1,720

Black 2,160 2,100 2,580

Color 27,000 45,000 40,000

Black 103,000 85,000 90,000

1.1.4Machine specification

Items Specifications

Power requirement Voltage AC 100 V AC 110 V AC 120 V AC 220 V to 240 V

Current 15 A 15A 12A 8A

Frequency 50/60 Hz 60 Hz 60 Hz 50/60 Hz

Max. power consumption 1,500 W or less 1,500 W or less 1,500 W or less 1,580 W or less

Power consumption in each mode

Dimension 615 mm (*4) (W) x 688 mm (D) x 779 mm (H) (*5) (24 3/16 inches (*4) (W) x 27

Space requirements 937 mm (W) x 1,227 mm (D) x 779 mm (H) (*6) (36 7/8 inches (W) x 48 5/16

Weight Approx. 84 kg (185 3/16 lb) (without toner cartridge)

Operating environment

• *1: [Administrator] -> [Maintenance] -> [Timer Setting] -> [Power Supply/Power Save Settings] -> [Power Consumption in Sleep Mode]

• *2: Even in sub power off mode, [Disable], [Enabled] and [High] are selectable in [Administrator] -> [Maintenance] -> [Timer Setting] -> [Power Supply/Power Save Settings] -> [Power Consumption in Sleep Mode].

• *3: The value is only provided for reference. It varies depending on different operating environments.

• *4: Width when the manual bypass tray is closed

• *5: Height up to the original glass

Standby 255 W or less (*3)

Low power mode 100W or less (*3)

Sleep mode (*1) 0.49 W (*3)

Sub power OFF mode (*2) 0.49 W (*3)

ErP auto power off mode 0.49 W (*3)

Plug-in power consumption 0.2 W

1/16 inches (D) x 30 11/16 inches (H) (*5))

inches (D) x 30 11/16 inches (H) (*6))

Temperature 10 to 30 ° C / 50 to 86 ° F (with a fluctuation of 10 ° C / 18 ° F or less per hour)

Humidity 15 to 85 % (Relative humidity with a fluctuation of 10 % or less per hour)

Levelness Difference between front and back, right and left should be 1 degree or under.

C-3

Page 69

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

• *6: Manual bypass tray/sub tray and the tray are pulled out.

1.1.5Print function

Items Specifications

First print time (A4 or 8 1/2 x 11, plain paper, tray 1, full size)

Printing speed for multi-print cycle (A4 or 8 1/2 x 11, plain paper, except for the manual bypass tray)

Print resolution Multivalued: Equivalent to 1,800 dpi in main scanning direction x 600 dpi in sub scanning

Printer language PCL5e/c Emulation,

Printer driver (PCL6/XPS/FAX) Server Windows Server 2008 (x86/x64)

Printer driver (PS3) Server Windows Server 2008 (x86/x64)

Work memory 8 GB

Host interface Ethernet 10Base-T, 100Base-TX, 1000Base-T

Built-in fonts (PCL) European 80 fonts

Built-in fonts (PostScript 3 Emulation) European Type1 font 137 fonts

bizhub C360i Color: 9.0 sec. or less

Black: 7.6 sec. or less

bizhub C300i Color: 9.2 sec. or less

Black: 7.6 sec. or less

bizhub C250i Color: 9.4 sec. or less

Black: 7.9 sec. or less

bizhub C360i 36 sheets/min. (1-sided), 36 sheets/min. (2-sided)

bizhub C300i 30 sheets/min. (1-sided), 30 sheets/min. (2-sided)

bizhub C250i 25 sheets/min. (1-sided), 25 sheets/min. (2-sided)

direction Binary: Equivalent to 1,200 dpi in main scanning direction x 1,200 dpi in sub scanning direction

PCL 6 (XL Version 3.0) Emulation PostScript 3 (3016) Emulation XPS ver.1.0

Windows Server 2008 R2 Windows Server 2012 Windows Server 2012 R2 Windows Server 2016

Client Windows 7 (x86/x64)

Windows 8.1 (x86/x64) Windows 10 (x86/x64)

Windows Server 2008 R2 Windows Server 2012 Windows Server 2012 R2 Windows Server 2016

Client Windows 7 (x86/x64)

Windows 8.1 (x86/x64) Windows 10 (x86/x64) Mac OSX (10.9, 10.10, 10.11, 10.12, 10.13) PPD+PDE Red Hat Enterprise Linux (CUPS v1.1.22) PPD

USB 2.0/1.1 USB_Host

Japanese HGMinchoL, HGPMinchoL, HGGothicB, HGPGothicB

Japanese HGMinchoL, HGGothicB

1.1.6Scan function

Items Specifications

Scannable scan range Conform to the basic specifications

Scanning resolution Push: 200 dpi, 300 dpi, 400 dpi, 600 dpi

Scanning speed Color: 80 sheets/min., Black: 80 sheets/min. (using DF-632/DF-714, A4, 1-sided original, scanning

Scanning size (scanner glass) Width 297 mm x Length 431.8 mm (Width 11 11/16 inches x Length 17 inches) (Max.)

Scanning size (DF) Width 297 mm x Length 1,000 mm (Width 11 11/16 inches x Length 39 3/8 inches) (Max.): 400 dpi or

Interface Ethernet 10Base-T, 100Base-TX, 1000Base-T

Communication protocol TCP/IP (FTP, SMB, SMTP, WebDAV) IPv4/IPv6

TWAIN Driver Type HDD TWAIN Driver

Pull: 100 dpi, 200 dpi, 300 dpi, 400 dpi, 600 dpi

resolution of 300 dpi) Color: 100 sheets/min., Black: 100 sheets/min. (using DF-714, A4, 1-sided original, scanning resolution of 200 dpi)

less Width 297 mm x Length 432 mm (Width 11 11/16 inches x Length 17 inches) (Max.): 600 dpi

Real Time Mode Twain Driver

Supported operating system

Windows 7 (x86/x64) Windows 8.1 (x86/x64) Windows 10 (x86/x64)

C-4

Page 70

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

Items Specifications

Function Scan to FTP, Scan to PC (SMB), Scan to E-Mail, Scan to WebDAV, Scan to BOX [SSD], Scan to

Output method TIFF, PDF, Compact PDF, JPEG, XPS, Compact XPS, OOXML (pptx, xlsx, docx), Searchable PDF,

Output page setting Specified number of separate pages (1 to 999 pages), Multi page

USB memory, Scan to Scan Server, Devices Profile for Web Services (DPWS), Scan to Me, Scan to Home, Scan to Web service (WSD scan), Scan to URL

PDF/A, Linearized PDF

1.1.7Web browser function

• Main specifications of the web browser installed are as follows.

Items Specifications

Browser engine Chromium Browser

Supported protocol HTTP (HTTP 0.9/1.0/1.1)

Supported markup language HTML 4.01

Style sheet CSS3

Script language JavaScript 1.7

DOM Level 1

File type JPEG

Supported SSL/TLS version SSL3.0

Supported character code Japanese (Shift_JIS)

PDF viewer Adobe Reader LE

• *1: Limited to the JavaScript-supported range only.

NOTE

▪ Using the web browser function available with this machine, the contents on the Internet can be accessed from the control panel.

Users are responsible for the contents that they access, download, or upload as well as the contents of other communication. Users shall follow the rules of their company and laws of their country. Konica Minolta, Inc. and its group companies accept no responsibility for the users’ use of the Internet.

NOTE

▪ When using a web browser function, 26 dots from the perimeter of the touch panel area is not sensitive area. Service Mode

Software Switch Setting It is possible to narrow the non-sensitive area by using [Software Switch Setting] in Service Mode as with followings. However, the touch panel cannot detect touch operation correctly.

▪ Switch No.143 [00000000] at Bit assignment/[00] at HEX assignment non-sensitive area: 26 dots from the perimeter of the

touch panel

▪ Switch No.143 [00000001] at Bit assignment/[01] at HEX assignment non-sensitive area: 16 dots from the perimeter of the

touch panel

▪ Switch No.143 [00000010] at Bit assignment/[02] at HEX assignment non-sensitive area: 9 dots from the perimeter of the

touch panel

HTTPS TCP/IP

A part of HTML 5.0 XHTML 1.1/Basic

ECMAScript (3rd/5th/5.1) Ajax*1

Level 2

BMP PNG GIF Animation GIF PDF

TLS1.0 TLS1.1 TLS1.2

Japanese (ISO-2022-JP) Japanese (EUC-JP) Chinese Simplified (GB2312) Chinese Traditional (Big5) Western European (ISO-8859-1) Unicode (UTF-8)

PDFium

1.2DF-632

Type

Name Reverse automatic document feeder

Type Document feed section Paper feed from top of stack

Document reading section Sheet-through system

Document switchback section

Document exit section Straight exit system

Switchback system

C-5

Page 71

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

20mm

10mm

Installation Screw clamp to the main body

Document alignment Center

Document loading Face up

Option Stamp unit (SP-501)

Function

Mode Standard mode, Mixed original detection mode, Scan mode/FAX mode

Original feeding speed (A4 or 8 1/2 x 11)

Copy 1-sided (600 dpi) 55 pages/min.

2-sided (600 dpi) 26 pages/min.

Scan/FAX mode 1-sided (300 dpi) 80 pages/min.

2-sided (300 dpi) 37 pages/min.

Type of document

Type Standard mode (Plain paper) 1-sided mode: 35 to 163 g/m2 (9 5/16 to 43 3/8 lb)

2-sided mode: 50 to 163 g/m2 (13 5/16 to 43 3/8 lb)

Mixed original detection mode (Plain paper)

Scan/FAX mode (Plain paper) 1-sided mode: 35 to 163 g/m2 (9 5/16 to 43 3/8 lb)

Document size Standard mode Japan: Postcard S, B6 to A3

Mixed original detection mode Refer to the mixed original feed chart.

Scan/FAX mode Metric: Postcard S, B6 to A3

Capacity Standard mode

Mixed original detection mode Scan/FAX mode

1-sided mode: 35 to 128 g/m2 (9 5/16 to 34 1/16 lb)

2-sided mode: 50 to 128 g/m2 (13 5/16 to 34 1/16 lb)

2-sided mode: 50 to 163 g/m2 (13 5/16 to 43 3/8 lb)

Europe: A6S to A3 North America: 5 1/2 x 8 1/2 to 11 x 17

Inch: 5 1/2 x 8 1/2 to 11 x 17 Width: 100 to 297 mm (3 15/16 to 11 11/16 inches) Length: 139.7 to 431.8 mm (5 1/2 to 17 inches) (FAX transmission mode: 139.7 to 1,000 mm (5 1/2 to 39 3/8 inches))

Japan: 130 sheets (68 g/m2 (18 1/16 lb)) or stack of 12 mm (1/2 inches) and below (including paper curl) Europe: 100 sheets (80 g/m2 (21 1/4 lb)) or stack of 12 mm (1/2 inches) and below (including paper curl) North America: 100 sheets (75 g/m2 (19 15/16 lb)) or stack of 12 mm (1/2 inches) and below (including paper curl)

Particular original

• If fed, paper feed will be possible to some extent but trouble occurrence will be possible.

Type of document Possible trouble

Sheets lightly curled (Curled amount: 10 to 15 mm (3/8 to 9/16 inches)) (*1)

Thermal paper (Heat sensitive paper) Edge folded, exit failure, transport failure

Paper immediately after paper exit from the main unit Paper feed failure, transport failure

Paper with many punched holes (e.g., loose leaf (*2), CF paper (*3))

Folded original (including half-folded and Z-folded originals) (*4)

Sheets with 2 to 4 holes Transport failure

Coated paper (including inkjet paper) Paper feed failure, transport failure

• *2: Limited to vertical feeding

• *3: No crease on perforation

• *4: Creases must be smoothed out. (amount of float: 15 mm (9/16 inches) or less)

Dog-eared, exit failure, transport failure

Multi-page feed due to flashes from holes

Paper feed failure, transport failure, image distortion

Prohibited original

• Prohibited originals that cause trouble

Type of original

Sheets stapled or clipped together

Book original

Sheets with paper attached

C-6

Page 72

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

Type of original

Sheets clipped or notched

Torn paper

Original weighing less than 35 g/m2 (9 5/16 lb) or 163 g/m2 (43 3/8 lb) or more

Significantly curled original (amount of curl exceeding 15 mm (9/16 inches))

OHP film

Label sheet

Offset master paper

Glossy photographic paper or glossy enamel paper

Mixed original feed chart

Same size Tilted with in 1.5 % or less

Mixed original feed available

No. mixed original feed

Max. original size

297 mm 257 mm 210 mm 182 mm 148 mm 128 mm

A3 A4 B4 B5 A4S A5 B5S A5S B6S

- - - - - - -

- - - - -

Max. original size

- - - -

8 1/2 x 11

◎ ◎

○ ○ ◎ ◎

○ ○ ○ ○ ◎ ◎

× × × × ◎ ◎

× × ○ ○ ○ ○ ◎

× × × × × × ○ ◎

× × × × × × × ○ ◎

11 inches 8 1/2 inches 5 1/2 inches

11 x 17 8 1/2 x 11 8 1/2 x 14 8 1/2 x 11S 8 1/2 x 5 1/

◎ ◎

○ ○ ◎ ◎ ◎

× × ◎ ◎ ◎

× × × × × ◎

- - -

- -

8 1/2 x 5 1/2S

For metric area

Mixed original

size

For inch area

Mixed original

size

◎

○

- Can not set original

297 mm A3

257 mm B4

210 mm A4S

182 mm B5S

148 mm A5S

128 mm B6S

11 inches 11 x 17

8 1/2 inches 8 1/2 x 14

8 1/2 x 11S

8 1/2 x 5 1/

5 1/2 inches 8 1/2 x 5 1/2S

Machine specification

Power requirement Power supply: DC 24 V, DC 5 V (for recovering from the sleep mode)

Supplying method: Supplied from the MFP main body

Max. power consumption 60 W or less

Dimension 611.2 mm (W) x 503.6 mm (D) x 127 mm (H) (24 1/16 inches (W) x 19 13/16 inches (D) x 5 inches

Weight Approx. 9.0 kg (19 13/16 lb)

(H))

Operating environment

• Conforms to the operating environment of the main body.

1.3DF-714

Type

Name Reverse automatic document feeder

Type Document feed section Paper feed from top of stack

Document reading section Front side: Sheet-through system

Document exit section Straight exit system

Back side: Reading by CIS

C-7

Page 73

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

20mm

10mm

Installation Screw clamp to the main body

Document alignment Center

Document loading Face up

Option Stamp unit (SP-501)

Function

Mode Standard mode, Mixed original detection mode, Scan mode/FAX mode

Original feeding speed (A4 or 8 1/2 x 11)

Copy 1-sided (600 dpi) 55 pages/min.

2-sided (600 dpi) 110 pages/min.

Scan/FAX mode 1-sided (300 dpi) 80 pages/min.

2-sided (300 dpi) 160 pages/min.

Scan 1-sided (200 dpi) 100 pages/min.

2-sided (200 dpi) 200 pages/min.

Type of document

Type Standard mode (Plain paper) 1-sided mode: 35 to 163 g/m2 (9 5/16 to 43 3/8 lb)

2-sided mode: 50 to 163 g/m2 (13 5/16 to 43 3/8 lb)

Mixed original detection mode (Plain paper)

Scan/FAX mode (Plain paper) 1-sided mode: 35 to 163 g/m2 (9 5/16 to 43 3/8 lb)

Document size Standard mode Japan: Postcard S, B6 to A3

Mixed original detection mode Refer to the mixed original feed chart.

Scan/FAX mode Metric: Postcard S, B6 to A3

Capacity Standard mode

Mixed original detection mode Scan/FAX mode

1-sided mode: 35 to 128 g/m2 (9 5/16 to 34 1/16 lb)

2-sided mode: 50 to 128 g/m2 (13 5/16 to 34 1/16 lb)

2-sided mode: 50 to 163 g/m2 (13 5/16 to 43 3/8 lb)

Europe: A6S to A3 North America: 5 1/2 x 8 1/2 to 11 x 17

Inch: 5 1/2 x 8 1/2 to 11 x 17 Width: 100 to 297 mm (3 15/16 to 11 11/16 inches) Length: 139.7 to 431.8 mm (5 1/2 to 17 inches) (FAX transmission mode: 139.7 to 1,000 mm (5 1/2 to 39 3/8 inches))

Particular original

• If fed, paper feed will be possible to some extent but trouble occurrence will be possible.

Type of document Possible trouble

Sheets lightly curled (Curled amount: 10 to 15 mm (3/8 to 9/16 inches)) (*1)

Thermal paper (Heat sensitive paper) Edge folded, exit failure, transport failure

Paper immediately after paper exit from the main unit Paper feed failure, transport failure

Paper with many punched holes (e.g., loose leaf (*2), CF paper (*3))

Folded original (including half-folded and Z-folded originals) (*4)

Sheets with 2 to 4 holes Transport failure

Coated paper (including inkjet paper) Paper feed failure, transport failure

• *1: Amount of curl: When the original is less than 10 mm (3/8 inches) in vertical and 20 mm (13/16 inches) in horizontal direction and the amount of float of the folded original is less than 10 mm (3/8 inches), the feed and the image are guaranteed. When the amount of float of the folded original is less than 10 mm (3/8 inches), the feed and the image are guaranteed.

• *2: Limited to vertical feeding

• *3: No crease on perforation

• *4: Creases must be smoothed out. (amount of float: 15 mm (9/16 inches) or less)

Dog-eared, exit failure, transport failure

Multi-page feed due to flashes from holes

Paper feed failure, transport failure, image distortion

Prohibited original

• Prohibited originals that cause trouble

C-8

Page 74

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

Type of original

Sheets stapled or clipped together

Book original

Sheets with paper attached

Sheets clipped or notched

Torn paper

Original weighing less than 35 g/m2 (9 5/16 lb) or 163 g/m2 (43 3/8 lb) or more

Significantly curled original (amount of curl exceeding 15 mm (9/16 inches))

OHP film

Label sheet

Offset master paper

Glossy photographic paper or glossy enamel paper

Mixed original feed chart

Same size Tilted with in 1.5 % or less

Mixed original feed available

No. mixed original feed

Max. original size

297 mm 257 mm 210 mm 182 mm 148 mm 128 mm

A3 A4 B4 B5 A4S A5 B5S A5S B6S

- - - - - - -

- - - - -

Max. original size

- - - -

8 1/2 x 11

8 1/2 x 11S

8 1/2 x 5 1/

◎ ◎

○ ○ ◎ ◎

○ ○ ○ ○ ◎ ◎

× × × × ◎ ◎

× × ○ ○ ○ ○ ◎

× × × × × × ○ ◎

× × × × × × × ○ ◎

11 inches 8 1/2 inches 5 1/2 inches

11 x 17 8 1/2 x 11 8 1/2 x 14 8 1/2 x 11S 8 1/2 x 5 1/

◎ ◎

○ ○ ◎ ◎ ◎

× × ◎ ◎ ◎

× × × × × ◎

- - -

- -

8 1/2 x 5 1/2S

For metric area

Mixed original

size

For inch area

Mixed original

size

◎

○

- Can not set original

297 mm A3

257 mm B4

210 mm A4S

182 mm B5S

148 mm A5S

128 mm B6S

11 inches 11 x 17

8 1/2 inches 8 1/2 x 14

5 1/2 inches 8 1/2 x 5 1/2S

Machine specification

Power requirement Power supply: DC 24 V, DC 5 V (for recovering from the sleep mode), DC 12 V (for CIS)

Supplying method: Supplied from the MFP main body

Max. power consumption 74.5W or less

Dimension 612 mm (W) x 504 mm (D) x 139 mm (H) (24 1/8 inches (W) x 19 7/8 inches (D) x 5 1/2 inches (H))

Weight Approx. 12.0 kg (26 1/2 lb)

Operating environment

• Conforms to the operating environment of the main body.

1.4PC-116/PC-216

Type

Name 1 way paper feed cabinet (PC-116)

Type Front loading type

2 way paper feed cabinet (PC-216)

C-9

Page 75

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

• 1 way paper feed device (PC-116)

• 2 way paper feed device (PC-216)

Installation Desk type

Document alignment Center

Paper

Type Size Capacity

Tray 3 Tray 4

Thin paper (52 to 59 g/m2 (13 13/16 to 15 11/16 lb)) (*1)

Plain paper (60 to 90 g/m2 (15 15/16 to 23 15/16 lb))

Plain paper+ (91 to 105 g/m2 (24 3/16 to 27 15/16 lb))

Recycled paper (60 to 90 g/m2 (15 15/16 to 23 15/16 lb))

Thick 1 (106 to 120 g/m2 (28 3/16 lb to 31 15/16 lb))

Thick 1+ (121 to 157 g/m2 (32 3/16 to 41 3/4 lb))

Thick 2 (158 to 209 g/m2 (42 to 55 9/16 lb))

Thick 3 (210 to 256 g/m2 (55 7/8 to 68 1/8 lb)) (*1)

Paper dimension Width 139.7 to 297.0 mm (5 1/2 to 11 11/16 inches)

• *1: Second side is an image guarantee out.

• *2: See Invoice S for inch sizes.

• There are 6 types to be selected from in the service mode; 8 x 13, 8 1/4 x 13, 8 1/2 x 13, 8 1/2 x 13 1/2, 8 1/8 x 13 1/4, 220 mm x 330 mm.

A3, B4, A4S, B5S, A4, B5, A5S (*2) Letter, LetterS, Legal, Ledger Foolscap (*3) 16K, 8K

Length 182.0 to 431.8 mm (7 3/16 to 17 inches)

500 sheets 500 sheets

150 sheets 150 sheets

Machine specification

Power requirement Supplied from the MFP main body

Max. power consumption 22 W or less

Dimension 615 mm (W) x 688 mm (D) x 246 mm (H) (24 3/4 inches (W) x 27 1/16 inches (D) x 9 11/16 inches

Weight PC-116 Approx. 22 kg (48 1/2 lb)

(H))

PC-216 Approx. 24 kg (52 15/16 lb)

Operating environment

• Conforms to the operating environment of the main body.

1.5PC-416

Type

Name Large capacity cabinet

Type Front loading type LCC

Installation Desk type

Document alignment Center

Paper

Type Size Capacity

Thin paper (52 to 59 g/m2 (13 13/16 to 15 11/16 lb)) (*1)

Plain paper (60 to 90 g/m2 (15 15/16 to 23 15/16 lb))

Plain paper+ (91 to 105 g/m2 (24 3/16 lb to 27 15/16 lb))

Recycled paper (60 to 90 g/m2 (15 15/16 to 23 15/16 lb))

Thick 1 (106 to 120 g/m2 (28 3/16 lb to 31 15/16 lb))

Thick 1+ (121 to 157 g/m2 (32 3/16 to 41 3/4 lb))

Thick 2 (158 to 209 g/m2 (42 lb to 55 9/16 lb))

A4/Letter (81/2 x 11) 2,500 sheets

1,000 sheets

C-10

Page 76

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

Type Size Capacity

Thick 3 (210 to 256 g/m2 (55 7/8 to 68 1/8 lb)) (*1)

• *1: Second side is an image guarantee out.

Machine specification

Power requirement Supplied from the MFP main body

Max. power consumption 22 W or less

Dimension 615 mm (W) x 688 mm (D) x 246 mm (H) (24 3/4 inches (W) x 27 1/16 inches (D) x 9

Weight Approx. 23 kg (50 11/16 lb)

11/16 inches (H))

Operating environment

• Conforms to the operating environment of the main body.

1.6LU-302

Type

Name 3,000 sheets Large Capacity Unit

Type External option attached to the right side of the main body

Document alignment Center

Paper

Type Size Basis weight Capacity

Plain paper A4 or Letter/Letter (81/2 x

Plain paper+ 91 to 105 g/m2 (24 3/16 to 27 15/16 lb) 3,000 prints/month

Thick 1 106 to 120 g/m2 (28 3/16 to 31 15/16 lb) 2,500 sheets (*2)

Thick 1+ 121 to 157 g/m2 (28 3/16 to 31 15/16 lb) 1,750 sheets (*2)

Thick 2 158 to 209 g/m2 (28 3/16 to 31 15/16 lb) 1,550 sheets (*2)

Thick 3 210 to 256 g/m2 (28 3/16 to 31 15/16 lb) 1,300 sheets (*1) (*2)

• *1: Images are out of guarantee.

• *2: Excluding damp paper, curled paper, and recycled paper.

11)

Machine specification

Power requirement All supplied from the MFP main body

Max. power consumption 22 W or less

Dimension 367 mm (W) x 528 mm (D) x 405 mm (H) (14 7/16 inches (W) x 20 13/16 inches (D) x 15 15/16

Weight Approx. 18.0 kg (39 11/16 lb)

inches (H))

52 to 90 g/m2 (13 13/16 to 23 15/16 lb) 3,000 prints/month

Operating environment

• Conforms to the operating environment of the main body.

1.7JS-506

Type

Type Job separator with movable tray

Installation Fixed at the paper exit section of the main body

Document alignment Center

Function

Mode • Non sort

Capacity

Exit tray Mode Paper size Paper type Capacity

Tray 1 (*1) (*3) • Non sort

• Sort

• Group

• Sort, group

• Sort offset, group offset

• A6S, A5S, A5, B5S, B5, B6S, A4S, A4, B4, A3

• InvoiceS, Invoice, LetterS, Letter, Legal, Ledger, ExectiveS, Exective

• 16KS, 16K, 8K

• Postcard S

• Custom size paper (Width: 90 to 297 mm (3 9/16 to 11 11/16 inches), Length: 139.7 to 431.8 mm (5 9/16 to 17 inches))

Thin paper (52 to 59 g/m2 (13 13/16 to 15 11/16 lb))

Plain paper/Recycled paper (60 to 90 g/m2 (15 15/16 to 23 15/16 lb))

Plain paper+ (91 to 105 g/m2, 24 3/16 to 27 15/16 lb)

100 sheets

10 sheets

C-11

Page 77

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

Exit tray Mode Paper size Paper type Capacity

Thick paper (106 to 300 g/m2, 28 3/16 to 79 13/16 lb)

Special paper

Tray 2 (*2) • Non sort

• Sort

• Group

• Sort offset

• Group offset

• *1: 22.5 mm (7/8 inches) in stack height (stacked height is determined by a sensor)

• *2: 49.9 mm (1 15/16 inches) in stack height (no sensor detection mechanism for stacked height)

• *3: If either the number or height of stacked sheets reaches the specified value, “Tray paper full” is determined.

• A6S, A5S, A5, B5S, B5, B6S, A4S, A4, B4, A3

• InvoiceS, Invoice, LetterS, Letter, Legal, Ledger, ExectiveS, Exective

• 16KS, 16K, 8K

• Postcard S

• Custom size paper (Width: 90 to 297 mm (3 9/16 to 11 11/16 inches), Length: 139.7 to 431.8 mm (5 9/16 to 17 inches))

• B5S, B5, A4S, A4, B4, A3

• LetterS, Letter, Legal, Ledger, ExectiveS, Exective, 16KS, 16K, 8K

• Custom size paper (Width: 182 to 297 mm (7 3/16 to 11 11/16 inches)/Length: 182 to

431.8 mm (7 3/16 to 17 inches))

Thin paper (52 to 59 g/m2 (13 13/16 to 15 11/16 lb))

Plain paper/Recycled paper (60 to 90 g/m2 (15 15/16 to 23 15/16 lb))

Plain paper+ (91 to 105 g/m2, 24 3/16 to 27 15/16 lb)

Thick paper (106 to 300 g/m2, 28 3/16 to 79 13/16 lb)

Special paper

Thin paper (52 to 59 g/m2 (13 13/16 to 15 11/16 lb))

Plain paper/Recycled paper (60 to 90 g/m2 (15 15/16 to 23 15/16 lb))

Plain paper+ (91 to 105 g/m2, 24 3/16 to 27 15/16 lb)

Thick paper (106 to 300 g/m2, 28 3/16 to 79 13/16 lb)

Postcard

Label sheet

OHP film

Index paper

Envelope

150 sheets

20 sheets

Postcard

Label sheet

OHP film

Index paper

Envelope 10 sheets

Long size paper (127 to 210 g/m2, 33 13/16 to 55 7/8 lb)

Not specified

150 sheets

20 sheets

Offset function

Exit tray Tray 2

Shift amount 30 mm (1 3/16 inches)

Machine specification

Power requirement DC 24 V ± 10 % (supplied from the MFP main body)

Max. power consumption 24 W or less

Dimension Tray 1: 412.0 mm (W) x 469.0 mm (D) x 130.0 mm (H) (16 1/4 inches (W) x 18 7/16 inches (D) x 5

Weight Approx. 1.5 kg (3.3 lb)

1/8 inches (H))

Tray 2: 451.0 mm (W) x 386.0 mm (D) x 127.0 mm (H) (17 3/4 inches (W) x 15 3/16 inches (D) x 5 inches (H))

Operating environment

• Conforms to the operating environment of the main body.

1.8FS-533

Type

Type Multi staple finisher built into the main body

Installation Installed in main body

Original alignment Center

Consumable Staples (5,000 staples / cartridge)

Function

Mode • Non sort

• Sort, group

C-12

Page 78

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

• Sort offset, group offset

• Sort staple

Paper process ability

Paper type Basis weight Max. capacity (Number of stacked sheets/Height of stacked sheets) (*1)

Non sort/sort/group Sort offset/group offset Sort staple

A4S or less B4 or greater A4S or less B4 or greater A4S or less B4 or greater

Thin paper 52 to 59 g/m2 (28

Plain paper 60 to 90 g/m2 (28

Recycled paper

Plain paper+ 91 to 105 g/m2 (28

Thick 1 106 to 120 g/m2 (28

Thick 1+ 121 to 157 g/m2 (28

Thick 2 158 to 209 g/m2 (28

Thick 3 210 to 256 g/m2 (55

Thick 4 257 to 300 g/m2 (68

Postcard 190 g/m2 (50 9/16 lb)

OHP film -

Envelope -

Label sheet -

Letterhead -

Tab paper -

• *1: If either the number or height of stacked sheets reaches the specified value, “Tray paper full” is determined.

• *2: Thick papers can be used only in "Front Cover/ Back Cover" in Cover sheet mode.

Type Size

Regular size paper

Custom size paper

Normal mode 52 to 90 g/m2 (13 13/16 to

Cover sheet mode (*) 52 to 209 g/m2 (13 13/16 to

• *: Thick paper can be used only in "Front Cover/ Back Cover".

3/16 to 31 15/16 lb)

7/8 to 68 1/8 lb)

3/8 to 79 13/16 lb)

Non sort/sort/group Sort offset/group offset Sort staple

• A6S, A5S, A5, B6S, B5S, B5, A4S, A4, B4, A3

• Invoice S, Invoice, Letter S, Letter, Legal, Ledger, Exective S, Exective

• 16KS, 16K, 8KS, 8K

• Postcard S

• Width: 90 to 320 mm (3 9/16 to 12 5/8 inches)

• Length: 139.7 to 1200 mm (5 1/2 to 47 1/4 inches)

Mode Basis weight Max. No. of sheets to be stapled Stapling position

23 15/16 lb)

55 5/8 lb) (2 sheets or under for thick paper)

500 sheets / 73mm250 sheets / 36mm500 sheets / 73mm250 sheets / 36mm500 sheets / 73

10 sheets / 73mm10 sheets / 36mm10 sheets / 73mm10 sheets / 36mmNot specified (*2)

× ×

• B5, A4S, A4, B4, A3

• Letter S, Letter, Legal, Ledger, Exective

• 16K, 8K

• Width: 210 to 297 mm (8 1/4 to 11 11/16 inches)

• Length: 182 to 431.8 mm (7 3/16 inches to 17 inches)

A4S or less B4 or greater

50 sets 30 sheets • Back of the corner

48 sheets (Plain paper / Recycled paper) + 2 sheets (Thick paper)

28 sheets (Plain paper / Recycled paper) + 2 sheets (Thick paper)

mm 50 sets

× ×

• B5, A4S, A4, B4, A3

• Letter S, Letter, Legal, Ledger, Exective

• 16K, 8K

• Width: 210 to 297 mm (8 1/4 to 11 11/16 inches)

• Length: 182 to 431.8 mm (7 3/16 to 17 inches)

(Parallel)

• Front of the corner (Parallel)

Center two points (parallel)

250 sheets / 36 mm 30 sets

Machine specification

Power requirement DC 24 V ± 10% (supplied from the MFP main body)

Max. power consumption 40 W or less

Dimension 472.5 mm (W) (*) x 583.5 mm (D) (*) x 194.7 mm (H) (18 5/8 inches (W) (*) x 23 inches (D) (*) x 7 11/16

Weight Approx. 12.0 kg (26 7/16 lb)

• *: Includes mounting part

inches (H))

Operating environment

• Conforms to the operating environment of the main body.

C-13

Page 79

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

1.9PK-519

Type

Name Punch kit

Type FS-integrated type punching operation device

Function

Punching method Stops and punches every paper

No. of holes Japan: 2 holes

Supported mode Punch mode

Applicable post processing mode Sort, Group, Staple

Paper

Size B5S, B5, A4S, A4, B4, A3

Supported paper Plain paper (60 to 90 g/m2 (15 15/16 to 23 15/16 lb)), Plain paper+ (91 to 105 g/m2 (24 3/16 to 27

Punch prohibited paper Label paper, Tab paper, OHP film, Translucent paper, Holed paper

Machine specification

Power requirement DC 24 V (supplied from the finisher)

Max. power consumption Included in the max. power consumption of finisher

Dimension 110.2 mm (W) x 483.5 mm (D) x 203.2mm (H) (4 5/16 inches (W) x 19 1/16 inches (D) x 8 inches

Weight Approx. 3.2 kg (7 1/16 lb)

North America: 2-3 holes switching Europe: 2-4 holes switching Sweden: 4 holes

Letter S, Letter, Legal, Ledger, Exective S, Exective 16KS, 16K, 8K

15/16 lb)) Thick 1 (106 to 120 g/m2 (28 3/16 to 31 15/16 lb)), Thick 1+ (121 to 157 g/m2 (32 3/16 to 41 3/4 lb))

Other paper that may interfere with the operation of the punch kit or the punch blade

DC 5 V (supplied from the finisher)

(H))

Operating environment

• Conforms to the operating environment of the main body.

1.10FS-536/FS-536SD

Type

Name Multi staple finisher (FS-536)

Type Freestanding

Original alignment Center

Stapling function Center 2-point stapling method by fixed stapler (FS-536SD)

Consumable Staples (5,000 staples / cartridge)

Function

Mode • Sort, group, sort offset, group offset, sort staple

Paper process ability

NOTE

▪ If either the number or height of stacked sheets reaches the specified value, “Tray paper full” is determined.

Capacity

Paper type Basis weight Maximum number of stacked sheets

Thin paper 52 to 90 g/m2 (13

Plain paper

Recycled paper

Plain paper+ 91 to 105 g/m2 (24

Thick paper 106 to 300 g/m2 (28

Postcard -

13/16 to 23 15/16 lb)

3/16 to 27 15/16 lb)

3/16 to 79 13/16 lb)

Finisher-contained center-staple and tri-fold device (FS-536SD)

• Center staple (FS-536SD), Center fold (FS-536SD), Tri-folding (FS-536SD)

Main tray Sub tray

A5/A5S/InvoiceS or less B5/B5S or greater, A4S/

LetterS or less

500 sheets 3,000 sheets (FS-536)

2,000 sheets (FS-536SD)

20 sheets 20 sheets

B4/Legal or greater

1,500 sheets 200 sheets

C-14

Page 80

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

Paper type Basis weight Maximum number of stacked sheets

Main tray Sub tray

A5/A5S/InvoiceS or less B5/B5S or greater, A4S/

Envelope -

OHP film -

Label sheet -

Letterhead -

Tab paper - -

Height of stacked sheets (main tray)

Paper length Maximum height of stacked sheets

A4S/LetterS or less 375 mm (14 3/4 inches) (FS-536), 250 mm (9 13/16 inches) (FS-536SD)

B4/Legal or greater 187.5 mm (7 3/8 inches)

Paper size

Type Size

Main tray Sub tray

Regular size paper • A6S, A5S, A5, B5S, B5, B6S, A4S, A4, B4, A3, SRA3, A3 wide, Postcard S

Custom size paper • Width: 130 to 320 mm (5 1/8 to 12 5/8 inches)

NOTE

▪ If either the number or height of stacked sheets reaches the specified value, “Tray paper full” is determined.

Number of stacked sheets (main tray)

Paper type Basis weight Maximum number of stacked sheets

Thin paper 52 to 90 g/m2 (13 13/16 to

Plain paper

Recycled paper

Plain paper+ 91 to 105 g/m2 (24 3/16 to

Thick paper 106 to 300 g/m2 (28 3/16 to

Height of stacked sheets (main tray)

Paper length Maximum height of stacked sheets

A4S/LetterS or less 375 mm (14 3/4 inches) (FS-536), 250 mm (9 13/16 inches) (FS-536SD)

B4/Legal or greater 187.5 mm (7 3/8 inches)

Paper size (main tray)

Type Size

Regular size paper • A5, B5S, B5, A4S, A4, B4, A3, SRA3, A3 Wide

Custom size paper • Width: 182 to 320 mm (7 3/16 to 12 5/8 inches)

Paper capacity (main tray)

Paper type Basis weight No. of sheets to be stapled Max. capacity (Number of stacked sheets/Height of stacked sheets)

Thin paper Plain paper Recycled paper

• *: 100 sets for thin paper or recycled paper

Paper size (main tray)

Regular size paper • A5, B5S, B5, A4S, A4, B4, A3

Custom size paper • Width: 182 to 297 mm (7 3/16 to 11 11/16 inches)

52 to 90 g/m2 (13 13/16 to 23 15/16 lb)

Type Size

23 15/16 lb)

27 15/16 lb)

79 13/16 lb)

• Invoice, InvoiceS, Letter, LetterS, Legal, Ledger, Exective, ExectiveS, 16K, 16KS, 8K

• Length: 139.7 to 457.2 mm (5 1/2 to 18 inches)

less than B5 A4/A4S/Letter/LetterS/B5 B4/B5S/Legal or greater

500 sheets 3,000 sheets (FS-536)

20 sheets

• Letter, LetterS, Legal, Ledger, Exective, ExectiveS, 16KS, 16K, 8K

• Length: 148.5 to 457.2 mm (5 7/8 to 18 inches)

A4/B5/Letter A4S/LetterS or less B4/Legal or greater

2 to 9 sheets 200 sets (*) 100 sets

10 to 20 sheets 50 sets

21 to 30 sheets 30 sets

31 to 40 sheets 25 sets

41 to 50 sheets 20 sets

• LetterS, Letter, Legal, Ledger, ExectiveS, Exective, 16KS, 16K, 8K

• Length: 148.5 to 431.8 mm (5 7/8 to 17 inches)

LetterS or less

• Width: 90 to 320 mm (3 9/16 to 12 5/8 inches)

• Length: 139.7 mm to 1,200 mm (5 1/2 inches to 47 1/4 inches)

2,000 sheets (FS-536SD)

B4/Legal or greater

1,500 sheets

C-15

Page 81

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

No. of sheets to be stapled (main tray)

Mode Max. No. of sheets to be stapled

Normal mode (*1) Thin paper / Plain paper / Recycled paper: 50 sheets (*2)

Plain paper+ (91 to 105 g/m2 (24 3/16 to 27 15/16 lb)), Thick paper (106 to 120 g/m2 (28 3/16 lb to 31 15/16 lb)): 30 sheets (*2)

Thick paper (121 to 209 g/m2 (32 3/16 to 55 5/8 lb)): 15 sheets (*2)

Cover sheet mode 48 sheets (75 g/m2 (19 15/16 lb), 80 g/m2 (21 1/4 lb), 90 g/m2 (23 15/16 lb)) + 2 sheets (163 g/m2 (43 3/8

• *1: Maximum stapling sheets/ sets for printing high image density is 20 x 20 sets.

• *2: For an original including different size of paper, the number of sheets to be stapled indicates the maximum number of sheets of the stapled largest paper.

Stapling position (main tray)

Stapling position Paper size

Back/Front of the corner (45 degree)

Back of the corner (Parallel) A4, A3, Letter, Ledger

Back/Front of the corner (Parallel) A4S, B5S, A5, LetterS, Legal

Side: Parallel 2 point A4S, A4, A3, B5S, B5, B4, A5, LetterS, Letter, Legal, Ledger

Supported paper in center staple /folding Thin paper (52 to 59 g/m2 (13 13/16 to 15 11/16 lb))

Supported paper sizes A4S, B4, A3, A3 wide, LetterS, Legal, Ledger, 8K, Custom size paper (Width: 210 to 320 mm (8 1/4

Supported mode and basis weight Normal mode: 52 to 90 g/m2 (13 13/16 to 23 15/16 lb)

Number of sheets stacked on the saddle tray

Number of center staple sheets Normal mode: 2 to 20 sheets (maximum 80 pages)

Number of folding sheets Normal mode: 5 sheets

• *1: For center staple, available only with 1 cover sheet of cover mode

• *2: For folding, available only with 1 cover sheet

• *3: Use only 1 sheet as a cover sheet for cover mode

• *4: Cover sheet: 1 sheet (52 to 209 g/m2 (13 13/16 to 55 5/8 lb)) + body page: 19 sheets (52 to 90 g/m2 (13 13/16 to 23 15/16 lb))

<Tri-folding>

Supported paper in tri-folding Thin paper (52 to 59g/m2 (13 13/16 to 15 11/16 lb))

Supported paper sizes A4S, LetterS, 16KS

Number of tri-folding sheets and copies (*)

• *: Up to 3 sheets in tri-folding

lb), 200 g/m2 (53 3/16 lb))

A4, A3, B5, B4, Letter, Ledger

Plain paper (60 to 90 g/m2 (15 15/16 to 23 15/16 lb)) Plain paper+ (91 to 105 g/m2 (24 3/16 lb to 27 15/16 lb)) (*1) (*2) Thick 1 (106 to 120 g/m2 (28 3/16 lb to 31 15/16 lb)) (*1) (*2) Thick 1+ (121 to 157 g/m2 (32 3/16 to 41 3/4 lb)) (*1) (*2) Thick 2 (158 to 209 g/m2 (42 to 55 5/8 lb)) (*1) (*2)

to 12 5/8 lb), length: 279.4 to 457.2 mm (11 to 18 lb))

Cover mode: 52 to 209 g/m2 (13 13/16 to 55 5/8 lb) (*3)

Thick paper mode: 91 to 209 g/m2 (24 3/16 to 55 5/8 lb)

1 to 3 sheets: 20 sets

4 to 10 sheets: 10 sets

11 to 20 sheets: 5 sets

Cover mode: 2 to 20 sheets (maximum 80 pages) (*4)

Thick paper mode: 1 sheet

Plain paper (60 to 90g/m2 (15 15/16 to 23 15/16 lb))

1 sheet folding 30 sets

2 sheets folding 10 sets

3 sheets folding

Machine specification

Power requirement DC 24 V ± 10 % (supplied from the MFP main body)

Power consumption 105 W or less

Dimension 528 mm (W) x 635 mm (D) x 1,023 mm (H) (20 13/16 inches (W) x 25 inches (D) x 40 1/4 inches

Weight FS-536: Approx. 36 kg (79 3/8 lb)/FS-536SD: Approx. 60 kg (132 1/4 lb)

• *1: Size when the paper output tray is pulled out

(H))

658 mm (W) x 635 mm (D) x 1,065 mm (H) (*1) (25 7/8 inches (W) x 25 inches (D) x 41 15/16 inches (H) (*1))

Operating environment

• Conforms to the operating environment of the main body.

C-16

Page 82

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

1.11PK-520

Type

Name Punch kit

Type FS-integrated type punching operation device

Functions

Punching method Stops and punches every paper

No. of holes • Japan: 2 holes

Supported mode Punch mode

Applicable post processing mode Sort, Group, Staple

Paper

Size • B5S, B5, A4S, A4, B4, A3

Supported paper Conforms to the operating environment of the main body.

Punch prohibited paper • Label paper, Tab paper, OHP film, Translucent paper, Holed paper

• North America: 2-3 holes switching

• Europe: 2-4 holes switching

• Sweden: 4 holes

• Letter S, Letter, Legal, Ledger, Exective S, Exective

• 16KS, 16K, 8K

• Plain paper (60 to 90 g/m2 (15 15/16 to 23 15/16 lb))

• Plain paper+ (91 to 105 g/m2 (24 3/16 lb to 27 15/16 lb))

• Thick 1 (106 to 120 g/m2 (28 3/16 to 31 15/16 lb))

• Thick 1+ (121 to 157 g/m2 (32 3/16 to 41 3/4 lb))

• Thick 2 (158 to 209 g/m2 (42 to 55 9/16 lb))

• Thick 3 (210 to 220 g/m2 (55 7/8 to 58 1/2 lb))

• Other paper that may interfere with the operation of the punch kit or the punch blade

Machine specification

Power requirement DC 24 V (supplied from the finisher)

DC 5 V (supplied from the finisher)

Max. power consumption Included in the max. power consumption of finisher

Dimension 61 mm (W) x 492 mm (D) x 142 mm (H) (2 3/8 inches (W) x 19 3/8 inches (D) x 5 9/16 inches (H))

Weight Approx. 1.8 kg (3 15/16 lb)

Operating environment

• Conforms to the operating environment of the main body.

1.12CU-102

Type

Name Clean unit

Type Exhaust scrubber

Suction system Dual parallel fan

Trapping system UFP trap UFP filter

UFP collection efficiency

Maximum suction air volume

Exhaust direction Exhaust downflow

Machine specification

Power requirement DC 24 V (supplied from the MFP main body)

Max. power consumption 17 W or less

Dimension 480 mm (W) x 75 mm (D) x 314 mm (H) (18 7/8 (W) x 3 1/16 (D) x 12

Weight Approx. 2.0 kg (4 7/16 lb)

UFP filter collection capacity: More than 99 %

1.2 m3/min (Avg. flow velocity: 0.1 m/sec)

3/8 (H))

Operating environment

• Conforms to the operating environment of the main body.

1.13FK-514/FK-515

1.13.1Basic specifications (1)General specifications

Applicable lines PSTN, PBX

C-17

Page 83

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

Protocol Group 3 (compliant to ITU-T T.30)

Maximum data rate 33,600 bps

Coding method • MH

Modulation method • V.27 ter

Communication resolution Normal • 8 lines/mm × 3.85 lines/mm

Fax memory size • 128 GB (128 GB in the main body storage is used as a memory.)

FAX memory backup Image data is saved in main body storage.

Multiple line connection Four lines can be connected by installing four fax kit. (FK-514 x 2units and MK-742 (FK-515 x

Communication time Level of 2 seconds (Konica Minolta standard A4 chart, 33,600 bps)

Resolution conversion At sending • Scanner: inch

• ECM

• F-code communication

• Konica Minolta non-standard protocol: No

• Group 4: No

• MR

• MMR

• JBIG

• V.29

• (V.33): V.33 is for reception only.

• V.17

• V.8

• V.34

• 200 dpi x 100 dpi

Fine • 8 lines/mm × 7.7 lines/mm

• 200 dpi x 200 dpi

Super fine • 8 lines/mm × 15.4 lines/mm (Reception only)

• 16 lines/mm × 15.4 lines/mm

• 400 dpi x 400 dpi

Ultra fine 600 dpi x 600 dpi

• Fixed to mm at transmission (except 600 dpi)

• mm and inch are available at reception.

• Selection by using the [Resolution] key.

• You can not change settings on every page.

• 10,000 pages can be stored including all Scan/Box/Printer/Fax documents.

2units))

• Density conversion: inch -> mm

• Communication: mm / inch (600 dpi only)

At receiving (mm) • Density conversion: mm -> inch

• Print: inch

At receiving (inch) • Density conversion: inch -> inch

• Print: inch

(2)Scanning section

Scanning method Platen documents Impossible to scan book documents (book mode)

DF book documents • Scanning mode: 1-Sided, 2-Sided and cover + 2-Sided

Scanning resolution Normal • 8 lines/mm × 3.85 lines/mm

Fine • 8 lines/mm × 7.7 lines/mm

Super fine • 16 lines/mm × 15.4 lines/mm

Ultra fine 600 dpi x 600 dpi

• Selection by using the [Resolution] key.

• You can not change settings on every page.

Mixed original Possible to mix documents of different sizes.

• After rotation of images, sizes are changed by EOM every time the length of the scan line is changed at sending.

• Possible to mix sizes (A and B).

Density selection Selection by using the [Density] key. [Light] / [Standard] / [Dark]

• You can not change settings on every page.

Maximum scanning document width 297 mm (A3 width) both for DF and Platen

Maximum scanning document length Regular mode • 431.8 mm

Long original mode of DF • 1,000 mm

• Possible to scan the DF mixed size documents.

• 200 dpi x 100 dpi

• 200 dpi x 200 dpi

• 400 dpi x 400 dpi

• 17 inches

• Originals with unlimited length are not available.

C-18

Page 84

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

Effective scanning range When a document is smaller than the effective scanning area, the area outside the document is

Automatic reduction at sending A3 -> B4, A3 -> A4 and B4 -> A4

Rotation transmission A4 / Letter size only. LEF documents are rotated by 90 degrees at sending to send it in SEF

Page division at sending No

Halftone 256 level error diffusion

Automatic background control (ABC) Yes

Finished stamp Yes

Scanning time 80 sheets/min (When DF is installed, letter (81/2 x 11) or A4, scanning, 300 dpi)

erased.

• DF scanning: left, right, head and bottom mask of 3 mm each (0 to 5 mm)

• Platen scanning: left, right and head mask of 2 mm each (fixed)

• Automatically reduced and sent in accordance with the recording paper size of remote station.

direction.

• Users can change settings by using the [Text], [Text/Photo, Printed], [Text/Photo, PhotoPaper], [Photo, Printed], [Photo, PhotoPaper], [Dot Matrix Original] or [Copied Paper] key.

(3)Recording section

Recording Laser electrostatic printing system

Recording paper size • All sizes except for B6 and Postcard (See the copier basic specifications.)

Recording paper cassette • Tray 1 to Tray 4

Staple No

Recording speed Compliant to the copier standards

Recording size A3 size maximum

Maximum reception length 1,000 mm

Reduction record When the received image information is larger than the recording paper, it is automatically

Page separation record Yes

Offset output at each communication Yes (Job unit reception only)

Rotation reception Yes

Two-sided reception Yes (Utility Mode)

2-in-1 reception No

Smoothing Yes (at converting the resolution)

Print/Fax output settings Yes

Bypass print Possible to use as an active tray in auto selection mode.

Total page counter Yes

Monitor print No (copy at sending)

• Auto recording paper selection

• Note: A5 and B5 paper is used only for A5 and B5 reception respectively

• Manual bypass tray

• LCT

• A3 fix as reception record ability declaration in protocol.

• In case of being larger than the maximum reception length, a communication error occurs.

• When the memory over occurs during reception, the received data is printed.

reduced to the recording paper size and recorded.

• Images are rotated by 90 degrees and recorded on the recording paper in LEF direction.

(4)Line connecting section

NCU type A-A~, line control by silicon DAA

Connecting terminal RJ11

Modem Matsushita MMD-5020

Modem sending level -10 to -15 dBm (Country spec)

DTMF sending level -10 to -15 dBm (Country spec)

Receiving sensitivity • G3 reception: up to -48 dB

Dialing signal DP (10pps) and DTMF

• Tone reception: up to -52 dB

(5)Control panel section

FAX / copy / scan / box Mode switching by panel key selection

Initial screen after power-onScreen at power off or facsimile screen.

• Possible to change modes during an operation of each mode.

• No mode return by the auto reset.

(depending on parameter setting))

C-19

Page 85

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

Interruption during scanning When pressing the interrupt key while scanning documents to be transmitted, INTERRUPT LED

Interruption during recording in the FAX mode screen

FAX start by using the start key.

Stop by using the stop key.

FAX free memory display RDH memory

File existence indication In the following cases, the data Indicator (LED) on the control panel lights up.

Display during the FAX communications No display by LCD panel icon.

Error display Displayed by LCD panel

Time display Date and time displayed.

Remote station ID display Yes

Other operation keys [Application] key: Moves to the FAX application function setting screen.

blinks. Copy screen appears after scanning is completed.

Operations by using the interrupt key are invalid.

• Possible to appoint to stop from the job list so as to stop during operations of the multi jobs.

• % indication on LCD during scanning, recording and stand-by.

File memory

• Display in the JOB LIST screen

• Upon reception of FAX

• When a document is saved in the bulletin board box, polling TX box, and memory RX user box.

Icons are displayed on the FAX waiting screen and the FAX operation screen.

• Present time is displayed on the sub-area.

• Displayed by number display before communications

• The TSI/CSI display during communications

• Check Setting key: Valid

• */# button: Yes

• Help button: Yes

1.13.2Functional specifications (1)Dial functions

Abbreviated dial Yes

Program dial 400 dials (200 with no main body storage installed)

Key pad dial 38 digits maximum

Group dial Up to 100 groups. Possible to register group names. Up to 500 remote stations per each group by

Dialing of multiple remote stations 605 remote stations maximum (abbreviated 500 + key pad 100 + manual input e-mail destination

Manual redial Yes

Automatic redial Yes

JOB LIST redial No

Pulse/tone switching Possible to switch by using the [*] key on the key pad or [Tone] key on the Direct Input screen.

PBX mode setting Yes

Pseudo off-hook Yes

Call progress detection DC loop (Depends on country spec).

• Possible to register 2,000 stations. (1,000 with no main body storage installed)

• 38 digits maximum

• Possible to search the remote station list in the order of abbreviation numbers and Indexes.

• The registration names must be 24 digits or less.

• Registration name auto registration function: No

• Second FAX No. registration function: No

• Impossible to register the communication mode.

• Possible to register Line Setting (Overseas TX, ECM Off, V.34 OFF, check destination, line selection (Only with four fax kit installed)).

• There is no registration function provided of [Scan Setting], [Comm. Setting] except the line setting.

abbreviated numbers only.

• Possible to select from five latest histories.

• Automatically redial when remote stations are busy or return no responses or transmission errors occur at the memory transmission.

• Possible to receive during redial waiting.

• Another call is possible. (Not possible when there are two redial waiting jobs.)

• Possible to turn ON or OFF the PBX connection and to register the external access code.

• There is the automatic removal function of external access code to registered abbreviated remote station No. Nothing is automatic addition function.

• The manual start is possible by using the pseudo off-hook.

• [Off-Hook] key on LCD

• Dial tone (Ditto)

• Busy tone (Ditto)

• Second dial tone (Ditto)

C-20

Page 86

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

Dial parameters Dialing signals DP (10 pps) and DTMF (Depends on country spec)

Phone book dial (Abbr) Yes

External phone connection jack Yes

• Pause between digits1 to 7 seconds (Users cannot set.)

• Pause between digits 3 seconds (fixed)

• After appointing character to search, use up and down cursor keys.

• Depends on specifications of each country.

(2)Transmission

Timer transmission 24-hour (max.) timer setting is possible. (one station, sequential multi-stations transmission)

Batch transmission No

Timer polling 24-hour (max.) timer setting is possible. (one remote station polling and sequential polling

No. of timers 21 transmissions and pollings in total. The number of sequential pollings is one.

Memory transmission reservation The memory transmission reservation is possible during communications. (memory registration of

DF transmission reservation No

Fold erase transmission No

Frame erase transmission Yes

Automatic layout transmission (Outside documents are erased.)

Reverse-image transmission No

2in1 transmission No

Book transmission No

Scanning size appointment Yes

Document image quality appointment Yes

Multi-stations 605 stations maximum (Abbr dial x 500 stations, keypad dial x 100 stations and E-Mail x 5)

Memory transmission

Forwarding transmission Yes

reception)

the DF memory transmission and platen memory transmission documents)

• Platen documents and book documents

• DF documents are possible as well.

• The regular mode only

• Scans documents in the appointed size irrelevant to document sizes and sends them. Transmits documents in the appointed scanning width and length at the platen transmission and the DF transmission.

• The effective image area is based on the center in the DF transmission. (Corner-base scanning in mixed-size document mode.)

• Selected from [Text], [Text/Photo, Printed], [Text/Photo, PhotoPaper], [Photo, Printed], [Photo, PhotoPaper], [Dot Matrix Original] or [Copied Paper].

The timer appointment is possible.

The default is the memory transmission (△Only the communication mode is possible

Quick memory transmission

Memory transmission

• Automatic forward: Automatic forward of received documents to remote stations registered in advance.

DF transmission

Platen transmission One page only

Mixture of DF/platen documents

Advanced communication function

Manual transmission

Transmission when the printer is active

DF transmission

Platen transmission

Mixture of DF/platen documents

Advanced communication function

Manual transmission

Transmission when the printer is active

○

△

Only the communication mode is possible

○

After the Separate Scan setting, the setting is read with the [Start] key and the communication is started up with the [Finish] key.

○

After the Separate Scan setting, the setting is read with the [Start] key and the communication is started up with the [Finish] key.

○

C-21

Page 87

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

• Manual forward: No

Interruption transmission Single station transmission reservation automatically interrupts between stations of multiple station

International communication Yes

V34-off transmission Transmitted without V34 mode. The V34-off appointment can be registered in the abbreviated /

Long original transmission Yes

DF irregular-size transmission Possible to transmit irregular-size originals from DF. The main scanning is the max. document

Incomplete TX hold Yes

Instant batch transmission (Bundled transmission)

Confidential transmission Transmission to the confidential BOX of a remote station by using the F code (SUB/SID).

Relay request The relay request by using the F-code (SUB/SID).

Relay transmission No

Transmission error prevention • Check destination: When transmitting, compares the FAX No. specified with the FAX No.

Confirm Address (at calling and registration)

communications.

• When the remote station is V17, communications start at TCM 7,200 bps. When the remote station is V34, they start at 28,800 bps.

program dials. This is used when the transmission error code related to V34 occurs frequently.

width set on DF, and the sub scanning depends on document length.

• Width: 297 mm/11.69 inch at the maximum

• Length: 1,000 mm/39.37 inch at the maximum

Appoints the confidential BOX No. by using SUB. Set the communication password using SID as required.

Appoints the relay BOX No. by using SUB.

information (CSI) of the remote station and transmits only when both numbers are the same.

• Destination check display function: When transmitting, displays the list of addresses to allow to check the address again and then transmit.

• Restrict FAX broadcasting: Prohibits to specify multiple addresses for FAX transmission.

During direct dialing, call is initiated only if the destination number inputted a first time matches with that inputted a second time.

(3)Polling

Polling transmission • There is one documents which allows the transmission setting.

Polling reception The sequential polling is possible.

Call turnaround polling No

Called turnaround polling Yes

Closed polling transmission No

Selective polling Transmission and reception.

• Documents are deleted after transmission.

• No additional scanning of documents.

• No DF polled transmission reservation.

600 stations maximum (abbreviated dial x 500 stations and key pad dialing x 100 stations)

• The selective polling by using the F-code (SEP).

• There is a bulletin board BOX polling reception.

• No confidential BOX polling transmission.

(4)Line seizure mode and telephone function

Line seizure mode switching Possible to set the automatic reception and the manual reception.

Ans. Machine mode Yes

Automatic reception mode Time and the number of rings.

Hold No

Handset No

One-piece phone Country spec

Call to external telephone No

Conversation reservation No

• When the memory is full and there are no polling transmission reservations, the automatic reception mode is cancelled.

• No switching of the auto / manual mode by appointing data and time.

• At the time of the CNG detection with the external phone off hook, a line is caught to start reception.

• No. of rings: 0 to 15 times (country spec)

• Time: 0 to 15 secs (country spec)

(5)Message reception and record

Confidential reception Reception at the confidential BOX appointed at the F-code (SUB).

C-22

Page 88

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

When a transmission password (SID) has been set for the confidential box, the SID should be specified as the communication password. At the time of printing documents received at the confidential BOX, a password to access to the confidential BOX is required.

Closed reception Closed reception by using the SID (PWD) (Junk FAX)

Adaptive (automatic) reduction 87 to 96 % in steps of 1 %

Fixed reduction No

Page separation record Yes. Does not overlap at the division.

Equal size recording Records the received image at an equal size.

Cassette selection Appropriate paper size auto selection

2-in-1 reception No

Becomes the adaptive reduction when “Print Separate Fax Pages = OFF” is selected. In case of the adaptive reduction, if the reception image size is a little bigger than recording paper, the size is automatically reduced so that it becomes within the recording paper size and is recorded.

When the reception size is larger than A3 form, excessive image is destructed.

• When paper is running out, paper is provided from another cassette with the same size of paper.

• Tray-fix mode available

(6)Memory function

Display of used memory space Yes (Fax screen: RDH memory)

Memory RX A password is required for printing received files. The password (up to 8 digits) is set when the

Memory substitute reception Yes (when there is no paper / no toner)

memory RX mode is set in the utility mode. First page can be printed.

(7)Various communication function

Short protocol No

ECM Yes

Communication timer Yes

Redial waiting Five redial timers maximum

Error page resending No (becomes the error page redial.)

Error page redial Effective to both quick memory transmission and memory transmission. Redial and retransmission

Total page number print Yes

Header memo No

TTI (Transmitting terminal ID) Yes

RTI (Receiving terminal ID) Yes

Fax remote diagnosis Yes

MH fix Yes. Setting can be made from the service mode.

Document insertion after dialing Yes.

Communication history Yes

Electronic key counter Yes

Key counter Yes

Coin vendor Yes

• Frame size: 64 byte / 256 byte

• 24 hours maximum. 21 including one for sequential polling timer.

in case of RTN or comm error.

• Redial interval: follows the busy redial interval.

• Num. of redials: 0 to 7 times (different counter from the busy redial)

• Automatic print to the TTI in memory transmission.

• Added when the number of document pages is appointed for quick memory transmission.

• 30 characters maximum

• Added not to the original read image, but to the top of the transmission image while in the image rotation being specified.

• The registration of up to 20 sender names is available.

• It is possible to make a selection to decide whether or not the address is printed at the header position.

• After processing the enlargement and/or reduction operations, a record is made at the bottom position specified before conducting an image rotation.

• Date, time and page no. are recorded.

• Document insertion is possible after dialing. Starts calling by using the [Start] button.

• The last 700 communication histories are recorded in the communication journal.

• The number of transmitted pages to each user. Limit control is not done.

• It is possible to use with FAX.

C-23

Page 89

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

(8)User lists / reports

Activity report • The total of 700 communications (sending and reception) can be recorded.

Timer Reservation TX Report Automatic output: Users can turn ON / OFF.

TX Result Report • Automatic output (ON / If TX Fails / OFF)

Sync transmit reservation report Automatic output: Users can turn ON / OFF.

Broadcast result report

Polled Tx reserve report

Polled Tx result report

Polled Rx result report

Sequential poll, Rx reservation report

Sequential poll, Rx result report

An address polling Rx reserved report

Relay TX Result Report

Relay Request Report

PC-Fax TX Error Report

Address Book List Manual output (numeric order: output to be produced for each destination type)

Program List Manual output

Group List

Fax Setting List

Bulletin TX Report Automatic output: Users can turn ON / OFF.

Confidential RX Report Auto output at the F code confidential reception. Automatic output: Users can turn ON / OFF.

Subject/Text list Manual output

• Automatic output: Daily / Every 100 Comm. / 100/ Daily

• Manual output: Yes

• Possible to output with images

(9)Other user functions

Fax ID Number ID: 20 digits (max.)

Header note No

Language Selection Yes

1.13.3Network fax specifications (1)Internet Fax

Image memory capacity 128 GB (128 GB in the main body storage is used as a memory.)

Max. no. of stored pages Approx. 10,000 pages

Resolution Ultra fine 600 dpi x 600 dpi

Transmission mode (File type) monochrome (TIFF-FX)

Transmission coding methods • TIFF-S (MH)

Max. scanning size • 420 mm x 297 mm (A3 size)

Max. recording size • 420 mm x 297 mm (A3 size)

Treatment of transmission error Mail transmitted again. No

Mail reception Mail acquisition interval Can be set to 1 to 60 minutes.

(numbers of pages in the case of storing standard A4-size pages containing approximately 700 characters at “fine” resolution)

Super fine 400 dpi x 400 dpi

Fine 200 dpi x 200 dpi

Normal 200 dpi x 100 dpi

• TIFF-F (MR/MMR)

• Width: 297 mm

• Length: 1,000 mm at the maximum

• When receiving the data of an original that is longer than the paper sizes set in the paper trays, the data is printed according to the setting of [Print Separate Fax Pages].

Internet fax Rx error report When documents cannot be sent to the SMTP server, transmission

error report to be printed/not printed can be set.

When MDN/DSN response is received, to be printed/not to be printed can be set.

When MDN/DSN response is received, transmission result is indicated on the transmission control report.

MDN/DSN response monitoring time can be set in the range from 0 to 99 hours.

Manual POP reception Possible

C-24

Page 90

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

Reception by specifying a box

Received document size width: A4 / B4 / A3

Reception coding system TIFF-S (MH), TIFF-F (MR/MMR)

List/report Print DSN message Output can be produced

Print MDN message Output can be produced

Print receipt mail text Output can be produced

Network fax relay result report

Network fax activity report • During automatic output: Shared with Fax Activity Report. Max.

Network fax Rx error report Output can be produced

Not Available (except Memory RX)

Output can be produced

100.

• During automatic output: Shared with Fax Activity Report. Max.

700.

(2)IP Address Fax

Image memory capacity 128 GB (128 GB in the main body storage is used as a memory.)

Max. no. of stored pages Approx. 10,000 pages

Resolution Ultra fine 600 dpi x 600 dpi

Transmission mode (File type) • Color (PDF, Compact PDF, TIFF-C) / Monochrome (TIFF)

Coding method MH/MR/MMR (applicable only to monochrome format)

Max. scanning size • 420 mm x 297 mm (A3 size)

Max. recording size • 420 mm x 297 mm (A3 size)

Treatment of transmission error Retry Retry when a transmission error occurs at SIP Direct SMTP

Reception Received document size Max. document width to be received: A3

Report Print receipt mail text Possible

(numbers of pages in the case of storing standard A4-size pages containing approximately 700 characters at “fine” resolution)

Super fine 400 dpi x 400 dpi

Fine 200 dpi x 200 dpi

Normal (Monochrome only)

• Capable of transmitting TIFF-C (JPEG)

• Incapable of receiving TIFF-C (JPEG) (any receiving TIFF-C jobs are discarded)

• Width: 297 mm

• Length: 1,000 mm at the maximum

• 1,000 mm in the maximum recording size

• Originals in excess of 1,000 mm cannot be received.

• In the color mode, the reception of an original in excess of 432 mm in length is unavailable.

• When receiving the data of an original that is longer than the paper sizes set in the paper trays, the data is printed according to the setting of [Print Separate Fax Pages]. (Only available for monochrome reception)

TX error report • TX error report printing ON/OFF can be set.

Reception coding system • TIFF-S (MH)

Received file size • Unlimited (depends on the space available for use in the main

IP address fax activity report

IP address fax result report In common use with fax reception result report

IP Address Fax RX Error Report

300 dpi x 300 dpi (Color: Compact PDF only)

200 dpi x 100 dpi

transmission. Error codes subject to retry: N10, N12, N15 to 17 only

• A TX error report is printed when a TX error occurs and the TX error is recorded in the activity.

• TIFF-F (MR/MMR)

• PDF

• Compact PDF

• TIFF-C

body storage)

• The file is not received, if the space available for use in the main body storage is 107 MB or less.

• If the space available for use in the main body storage runs out during reception, the session is abnormally terminated and the received file is deleted.

• During automatic output: Shared with Fax Activity Report. Max.

100.

• During automatic output: Shared with Fax Activity Report. Max.

700.

Possible

C-25

Page 91

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

1.14i-Option

1.14.1Available function for i-Option

• The functions available for i-Option are as follows.

(1)List of advanced functions

(2)Activation procedures of i-Option

For details of the activation procedures, refer to the followings.

• Activation via Administrator Settings: License Settings.

• Activation via Service Mode: License management - Activation

C-26

Page 92

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 2. OVERALL COMPOSITION



[1]

[2] [3] [4]

[5] [6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17][18][19][20][21]

[22][23]

[24]

[25]

[26]

[27]

[28]

[29]

[30]

[31]

[32]

2.OVERALL COMPOSITION

2.1SYSTEM CONFIGURATION

2.1.1System configuration (1)System front view

[1] bizhub C360i/C300i/C250i [2] Original Cover OC-511

[3] Reverse Automatic Document Feeder DF-632 [4] Dual Scan Document Feeder DF-714

[5] Stamp Unit SP-501 [6] Spare TX Marker Stamp 2

[7] Authentication Unit AU-201S [8] Mount Kit MK-735

[9] Authentication Unit AU-102 [10] Working Table WT-506

[11] Keypad KP-102 [12] Local Interface Kit EK-608

[13] Local Interface Kit EK-609 [14] Mount Kit MK-730

[15] Transformer kit TK-101 [16] Large Capacity Unit LU-302

[17] Desk DK-705 (*1) (*3) [18] Desk DK-516 (*1)

[19] Paper Feed Cabinet PC-416 [20] Paper Feed Cabinet PC-216

[21] Paper Feed Cabinet PC-116 [22] Power Supply BOX MK-734 (*2)

[23] Heater HT-509 [24] Keyboard Holder KH-102 (*1)

[25] Relay Unit RU-513 [26] Finisher FS-536

[27] Finisher FS-536SD [28] Punch Kit PK-520

[29] Finisher FS-533 [30] Punch Kit PK-519

[31] Job Separator JS-506 [32] Assist Handle AH-101

• *1: Except for Europe area

• *2: Except for Japan

• *3: Large Capacity Unit LU-302 cannot be mounted when Desk DK-705 is installed.

C-27

Page 93

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 2. OVERALL COMPOSITION

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

NOTE

▪ Use the desk or the paper feed cabinet without fail when installing on the floor in order to keep the function and quality of the

unit.

(2)System rear view

[1] Condensation prevention heater power supply box

MK-719 (*1)

[3] Clean Unit CU-102 [4] Image Controller IC-420

[5] Video Interface Kit VI-516 [6] Upgrade Kit UK-115

[7] Security Kit SC-509 [8] Fax Mount Kit MK-742 (*2)

[9] Fax Kit FK-515 (*2) [10] Fax Kit FK-515 (*2)

[11] Fax Kit FK-514 [12] Fax Kit FK-514

[13] Upgrade Kit (wireless) UK-221 [14] i-Option LK-102 v3/104 v3/105 v4/106/107/108/110

• *1: Japan only

• *2: Japan, North America and Asia Pacific only

[2] Condensation prevention heater HT-510 (*1)

v2/111/114/115/116

2.1.2Optional configuration (1)Combination configuration of main body and document options

1 Main body OC-511

2 Main body DF-632 SP-501 Spare TX Marker Stamp

3 Main body DF-714 SP-501 Spare TX Marker Stamp

(2)Combination configuration of main body and paper feed options

1 Main body DK-705

2 Main body DK-516

3 Main body PC-116 LU-302

4 Main body PC-216 LU-302

5 Main body PC-416 LU-302

(3)Combination configuration of main body and post-processing options

1 Main body JS-506

2 Main body FS-533 PK-519

3 Main body RU-513 FS-536 PK-520 SK-602

4 Main body RU-513 FS-536SD PK-520 SK-602

(4)Combination of main body and fax kit

body

FK-514 (main line) FK-514 (line 2) MK-742 FK-515 (line 3) FK-515 (line 4)

(a)Japan, North America, Asia Pacific

1 Main

(b)Europe

1 Main body FK-514 (main line) FK-514 (line 2)

(5)Combination of main body (scanner section) and heater

C-28

Page 94

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 2. OVERALL COMPOSITION

[1]

[9]

[2]

[10]

[13]

[11]

[12]

[8]

[7]

[3]

[4]

[5]

[6]

(a)Japan

1 Main body (scanner section) MK-719 HT-510

(b)International

• No optional settings

(6)Combination configuration of paper feed options and dehumidifier heater

(a)Japan

1 DK-516 (standard equipment

dehumidifier heater)

2 PC-116 (standard equipment

dehumidifier heater)

3 PC-216 (standard equipment

dehumidifier heater)

4 PC-416 (standard equipment

dehumidifier heater)

HT-509 LU-302 (standard equipment

dehumidifier heater)

HT-509 LU-302 (standard equipment

dehumidifier heater)

HT-509 LU-302 (standard equipment

dehumidifier heater)

TK-101

(b)International

1 DK-516 HT-509 MK-734

2 PC-116 HT-509 MK-734 LU-302 (standard

equipment dehumidifier heater)

3 PC-216 HT-509 MK-734 LU-302 (standard

equipment dehumidifier heater)

4 PC-416 HT-509 MK-734 LU-302 (standard

equipment dehumidifier heater)

TK-101

2.2SECTION CONFIGURATION

[1] Scanner section [2] Paper exit/reverse section

[3] Duplex section [4] Fusing section

[5] 2nd transfer section [6] Registration section

[7] Paper feed section (Manual bypass tray) [8] Paper feed section (Tray 2)

[9] Paper feed section (Tray 1) [10] Write section (PH section)

[11] Photoconductor section/Developing section [12] 1st transfer section

[13] Toner supply section - -

C-29

Page 95

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 2. OVERALL COMPOSITION

0)3PDLQERG\

㻮㻭㻿㻱㻌㼎㼛㼍㼞㼐

㻯㻼㼁㻌㼎㼛㼍㼞㼐

㻿㼠㼞㼍㼓㼑㻌

㼎㼛㼍㼞㼐

㻻㼜㼑㼞㼍㼠㼕㼛㼚㻌㼜㼍㼚㼑㼘

6NHZFRUUHFWLRQPRWRU

3RO\JRQPRWRU

㻼㻴㻌㼠㼑㼙㼜㼑㼞㼍㼠㼡㼞㼑㻌㼟㼑㼚㼟㼛㼞

,QGH[ERDUG

/DVHUGULYH

ERDUG

3+VHFWLRQ

0&.

([SDQVLRQ

FRQWUROERDUG

'HYHORSLQJ

VHFWLRQ

3KRWRFRQGXFWRU

VHFWLRQ

3DSHUIHHG

XQLW

)LQLVKHU

0DQXDOE\SDVV

WUD\VHFWLRQ

3DSHUIHHGVHFWLRQ

'XSOH[VHFWLRQ

%DFNXSERDUG

+LJKYROWDJHXQLW

7UDQVIHUVHFWLRQ

)XVLQJXQLW

'&SRZHUVXSSO\XQLW

,PDJHFRQWUROOHU

㼂㼕㼐㼑㼛㻌㼕㼚㼠㼑㼞㼒㼍㼏㼑㻌

㼗㼕㼠

.H\FRXQWHU

㻲㻭㼄㻌㼎㼛㼍㼞㼐

㼁㻿㻮㻌㼎㼛㼍㼞㼐

㻭㼡㼠㼔㼑㼚㼠㼕㼏㼍㼠㼕㼛㼚㻌

㼡㼚㼕㼠

㻿㼏㼍㼚㼚㼑㼞㻌㼐㼞㼕㼢㼑㻌

㼎㼛㼍㼞㼐

㻯㻯㻰㻌㼎㼛㼍㼞㼐

6FDQQHUVHFWLRQ

5*%

㻰㻲㻙㻣㻝㻠㻰㻲㻙㻢㻟㻞

㻰㼡㼍㼘㻌㼟㼏㼍㼚㻌㼕㼙㼍㼓㼑㻌

㼜㼞㼛㼏㼑㼟㼟㼕㼚㼓㻌㼎㼛㼍㼞㼐

2.3Paper path

Main body + DF-632 + PC-216 + RU-513 + FS-536SD + LU-302

• List of drive rollers and sensors in the paper path

2.4CONTROL BLOCK DIAGRAM

C-30

Page 96

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 2. OVERALL COMPOSITION

[1] [2]

[3]

[4]

[5] [6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

2.5IMAGE CREATION PROCESS

[1] Photoelectric

conversion

[2] Printer image

processing

[3] Photoconductor The image of the original projected onto the surface of the photoconductor is changed to a corresponding

[4] Charging roller Supply negative charge on the photoconductor.

[5] Laser exposure Expose photoconductor to a laser beam to develop electrostatic latent image.

[6] Developing • The toner, agitated and negatively charged in the developer mixing chamber, is attracted onto the

[7] 1st transfer A DC positive voltage is applied to the backside of the transfer belt, thereby allowing the visible, developed image

[8] 2nd transfer A DC positive voltage is applied to the backside of the paper, thereby allowing the visible, developed image on the

[9] Separation The paper, which has undergone the 2nd transfer process, is neutralized so that it can be properly separated from

[10] Transfer belt cleaning Residual toner on the surface of the transfer belt is collected for cleaning by cleaning blade.

[11] Main erase The surface of the photoconductor is irradiated with light, which neutralizes any surface potential remaining on the

[12] Photoconductor

cleaning

[13] Fusing The visible toner image transferred onto the surface of the paper is melted by the heat of the fusing roller and fixed

The light reflected off the surface of the original is separated into different colors using the color filters (R, G, and B); CCD then converts it into a corresponding electric signal and outputs the signal to the IR imaging processing section.

• The electric signal is converted to digital image signals. After going through some corrections, video signals (C, M, Y, and K) are output to the printer image processing section.

• D/A conversion will be performed after the VIDEO signals (Y, M, C, K) are corrected. This data will control the emission of the laser diode.

electrostatic latent image.

electrostatic latent image formed on the surface of the photoconductor. It is thereby changed to a visible, developed image.

• AC and DC negative bias voltages are applied to the developing roller, thereby preventing toner from sticking to the background image portion.

on the surface of each of the photoconductors (Y, M, C, and K) to be transferred onto the transfer belt.

surface of the transfer belt to be transferred onto the paper.

the transfer belt by the paper separator claws.

surface of the photoconductor.

The residual toner left on the surface of the photoconductor is scraped off.

to the paper by pressure.

C-31

Page 97

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 2. OVERALL COMPOSITION

㼀㻻㻰

㻿㼑㼜㼍㼞㼍㼠㼕㼛㼚㻌㼢㼛㼘㼠㼍㼓㼑

㻞㼚㼐㻌㼠㼞㼍㼚㼟㼒㼑㼞㻌㼢㼛㼘㼠㼍㼓㼑

㼀㼞㼍㼚㼟㼒㼑㼞㻌㼎㼑㼘㼠㻌㼟㼠㼍㼠㼡㼟

㻲㼡㼟㼕㼚㼓㻌㼙㼛㼠㼛㼞㻌㻔㻹㻟㻕

㻝㼟㼠㻌㼠㼞㼍㼚㼟㼒㼑㼞㻌㼢㼛㼘㼠㼍㼓㼑㻛㻷

㻰㼑㼢㼑㼘㼛㼜㼕㼚㼓㻌㼎㼕㼍㼟㻌㻭㻯㻌㼞㼑㼙㼛㼠㼑㻛㻷

㻰㼑㼢㼑㼘㼛㼜㼕㼚㼓㻌㼎㼕㼍㼟㻌㻰㻯㻛㻷

㻯㼔㼍㼞㼓㼑㻌㼎㼕㼍㼟㻌㻰㻯㻛㻷

㻯㼔㼍㼞㼓㼑㻌㼎㼕㼍㼟㻌㻭㻯㻌㼞㼑㼙㼛㼠㼑㻛㻷

㻯㼔㼍㼞㼓㼑㻌㼎㼕㼍㼟㻌㻭㻯㻛㻷

㻱㼞㼍㼟㼑㻌㻸㻱㻰㻛㻷

㻰㼑㼢㼑㼘㼛㼜㼕㼚㼓㻌㼟㼛㼘㼑㼚㼛㼕㼐㻌㻔㻿㻰㻠㻕

㼀㼞㼍㼚㼟㼜㼛㼞㼠㻌㼙㼛㼠㼛㼞㻌㻔㻹㻝㻕

㻝㼟㼠㻌㼠㼞㼍㼚㼟㼒㼑㼞㻌㼢㼛㼘㼠㼍㼓㼑㻛㼅㻹㻯

㻰㼑㼢㼑㼘㼛㼜㼕㼚㼓㻌㼎㼕㼍㼟㻌㻭㻯㻌㼞㼑㼙㼛㼠㼑㻛㼅㻹㻯

㻰㼑㼢㼑㼘㼛㼜㼕㼚㼓㻌㼎㼕㼍㼟㻌㻰㻯㻛㼅㻹㻯

㻯㼔㼍㼞㼓㼑㻌㼎㼕㼍㼟㻌㻰㻯㻛㼅㻹㻯

㻯㼔㼍㼞㼓㼑㻌㼎㼕㼍㼟㻌㻭㻯㻌㼞㼑㼙㼛㼠㼑㻛㼅㻹㻯

㻯㼔㼍㼞㼓㼑㻌㼎㼕㼍㼟㻌㻭㻯㻛㼅㻹㻯

㻱㼞㼍㼟㼑㻌㻸㻱㻰㻛㼅㻹㻯

㻰㼑㼢㼑㼘㼛㼜㼕㼚㼓㻌㼙㼛㼠㼛㼞㻌㻔㻹㻞㻝㻕

㻼㻯㻌㼙㼛㼠㼛㼞㻌㻔㻹㻞㻕

2.6IMAGE FORMING CONTROL

C-32

Page 98

bizhub C360i/C300i/C250i D SERVICE TOOL > 1. bizhub C360i/C300i/C250i

DSERVICE TOOL

1.bizhub C360i/C300i/C250i

Service material list

Name Shape Parts No. Remarks

Cleaning pad (30 pcs) A5AWP001## 30pcs/1 pack

Hydro-wipe 65AA-9920 10pcs/1pack

CE tool list

Tool name Shape Quantity Parts No. Remarks

Color chart 1 9J06 PJP1 ##

Monochrome chart 1 A79J PJP0 ##

Scanner positioning tool

1 A79J PJG0 ##

D-1

Page 99

bizhub C360i/C300i/C250i D SERVICE TOOL > 2. Utility tool

2.Utility tool

2.1IC card information setting tool of card reader

2.1.1Outline

• Before connecting a card reader to the MFP, it is necessary to prepare an IC card information setting file with the loadable driver.

• To prepare this file, a tool is used for preparing the IC card information setting file for use in each card reader.

Card reader IC card information setting file preparation tool

AU-201S Auth Device Tool Advanced for AU-201/AU-201S

AU-202H Auth Device Tool Advanced for SCL-010

OMNIKEY 5427CK (AU-205H) Auth Device Tool Advanced for AU-202H

SCL-010 Auth Device Advanced for 5427CK (AU-205H)

YSoft Auth Device Tool Advanced for YSoft CRv2/YSoft CRv3

System requirement of tools

OS • Windows 7

Library (Any of these needs to be installed)

Hard disk 3 MB or more free space is required

Display 800 x 600 pixels,16 bit full color

• Windows 8.1

• Windows 10

Support both 32-bit (x86) and 64-bit (x64) editions.

• Microsoft .Net Framework2.0 SP2

• Microsoft .Net Framework3.0 SP2

• Microsoft .Net Framework3.5 SP1

• Microsoft .Net Framework3.5.1

2.1.2IC card information setting procedures (1)Setting IC card information in the loadable driver in advance

(a)Auth Device Tool Advanced for AU-201/AU-201S

1. Obtain the loadable driver (ICC_LDR.tar) for use in AU-201S that is compatible with the type of card used.

2. Start the Auth Device Tool Advanced for AU-201/AU-201S.

3. Select [Import Loadable Driver] from [File] and select the loadable driver.

4. Select card type.

5. If the card is good for detailed settings, click [Detail Setting/Extra Data Setting].

6. Input the necessary extended data. (For details, ask the IC card administrator.)

7. Select Loadable Driver in [Export Format] and click [Export].

8. Select the loadable driver to be updated and the output location of the loadable driver and click [OK].

9. Copy the output loadable driver (ICC_LDR.tar) to the root directory of the USB memory.

NOTE

▪ Please do not save any other data in the USB memory.

10. Call the Service Mode to the screen of the MFP.

11. Select [System 2] -> [Driver Install] -> [Install].

12. Connect the USB memory in which the loadable driver has been saved to the USB port on the side of the control panel.

13. Select [Loadable driver] and touch the [Start] to install the loadable driver.

14. Remove the USB memory and, accessing [Billing Settings] -> [Authentication Device 2], select [Card].

15. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.

16. Set the authentication user.

(b)Auth Device Tool Advanced for SCL-010

1. Obtain the

2. Start the Auth Device Tool Advanced for SCL-010.

3. Select card type.

4. Select Loadable Driver in [Export Format] and click [Export].

5. Select the loadable driver to be updated and the output location of the loadable driver and click [OK].

6. Copy the output loadable driver (ICC_LDR.tar) to the root directory of the USB memory.

NOTE

▪ Please do not save any other data in the USB memory.

7. Call the Service Mode to the screen of the MFP.

8. Select [System 2] -> [Driver Install] -> [Install].

9. Connect the USB memory in which the loadable driver has been saved to the USB port on the side of the control panel.

10. Select [Loadable driver] and touch the [Start] to install the loadable driver.

11. Remove the USB memory and, accessing [Billing Settings] -> [Authentication Device 2], select [Card].

12. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.

13. Set the authentication user.

loadable driver (ICC_LDR.tar) for use in SCL-010 that is compatible with the type of card used.

(c)Auth Device Tool Advanced for AU-202H

1. Obtain the

2. Start the Auth Device Tool Advanced for AU-202H.

3. Set the card ID length.

loadable driver (ICC_LDR.tar) for use in AU-202H that is compatible with the type of card used.

D-2

Page 100

bizhub C360i/C300i/C250i D SERVICE TOOL > 2. Utility tool

4. Select Loadable Driver in [Export Format] and click [Export].

5. Select the loadable driver to be updated and the output location of the loadable driver and click [OK].

6. Copy the output loadable driver (ICC_LDR.tar) to the root directory of the USB memory.

NOTE

▪ Please do not save any other data in the USB memory.

7. Call the Service Mode to the screen of the MFP.

8. Select [System 2] -> [Driver Install] -> [Install].

9. Connect the USB memory in which the loadable driver has been saved to the USB port on the side of the control panel.

10. Select [Loadable driver] and touch the [Start] to install the loadable driver.

11. Remove the USB memory and, accessing [Billing Settings] -> [Authentication Device 2], select [Card].

12. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.

13. Set the authentication user.

(d)Auth Device Tool Advanced for 5427CK (Setting: TypeA/HID Prox/Multiple)

NOTE

▪ Selecting [Multiple] makes cards of HID Prox, HID iCLASS and TypeA available at the same time.

1. Obtain the

2. Start the Auth Device Tool Advanced for 5427CK (AU-205H).

3. Select card type. (Except for HID iCLASS)

4. Select Loadable Driver in [Export Format] and click [Export].

5. Select the loadable driver to be updated and the output location of the loadable driver and click [OK].

6. Copy the output loadable driver (ICC_LDR.tar) to the root directory of the USB memory.

NOTE

▪ Please do not save any other data in the USB memory.

7. Call the Service Mode to the screen of the MFP.

8. Select [System 2] -> [Driver Install] -> [Install].

9. Connect the USB memory in which the loadable driver has been saved to the USB port on the side of the control panel.

10. Select [Loadable driver] and touch the [Start] to install the loadable driver.

11. Remove the USB memory and, accessing [Billing Settings] -> [Authentication Device 2], select [Card].

12. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.

13. Set the authentication user.

loadable driver (ICC_LDR.tar) for use in OMNIKEY 5427CK (AU-205H) that is compatible with the type of card used.

(e)Auth Device Tool Advanced for 5427CK (HID iCLASS)

1. Obtain the

2. Start the Auth Device Tool Advanced for 5427CK (AU-205H).

3. Select HID iCLASS.

4. Click [Detail Setting].

5. Set the card ID length.

6. Select Loadable Driver in [Export Format] and click [Export].

7. Select the loadable driver to be updated and the output location of the loadable driver and click [OK].

8. Copy the output loadable driver (ICC_LDR.tar) to the root directory of the USB memory.

NOTE

▪ Please do not save any other data in the USB memory.

9. Call the Service Mode to the screen of the MFP.

10. Select [System 2] -> [Driver Install] -> [Install].

11. Connect the USB memory in which the loadable driver has been saved to the USB port on the side of the control panel.

12. Select [Loadable driver] and touch the [Start] to install the loadable driver.

13. Remove the USB memory and, accessing [Billing Settings] -> [Authentication Device 2], select [Card].

14. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.

15. Set the authentication user.

loadable driver (ICC_LDR.tar) for use in OMNIKEY 5427CK (AU-205H) that is compatible with the type of card used.

(f)Auth Device Tool Advanced for YSoft CRv2/YSoft CRv3

NOTE

▪ If a YSoft card reader is used, when performing authentication, the default setting for the loadable driver makes the card to

be informed as an HID Prox card regardless of which type you are using. To change the card type when performing authentication, using Auth Device Tool Advanced for YSoft CRv2/YSoft CRv3 to choose a corresponding card type to be reported to the authentication program from the following list.

Card Reader Name Readable Card Type IC Card Information Setting (card type to

KM USB Reader v2 MultiReader HF Mifare TypeA (1) (*1)

KM USB Reader v2 Legic Advant LEGIC TypeA (1) (*1)

KM USB Reader v2 ASK FSK 125kHz EM4100, EM4102, RFID 125kHz EM4100/

EM4102/ RFID 125kHz

KM USB Reader v2 Mot/Ind W26 Indala Indala

KM USB Reader v2 HID Prox HID Prox HID Prox (1) (*2)

KM USB Reader v2 HID iCLASS HID iCLASS HID iCLASS (1) (*3)

KM USB Reader v3 MF & Legic LEGIC TypeA (1) (*1)

KM USB Reader v3 Indala Indala Indala

KM USB Reader v3 MF+ EM4100, EM4102, RFID 125kHz EM4100/

EM4102/ RFID 125kHz

be reported)

D-3

konica C360i, C300i, C250i Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Table of Contents

bizhub C360i/C300i/C250i Revision List

bizhub C360i/C300i/C250i A SAFETY AND IMPORTANT WARNING ITEMS

Paper size Feeding direction Notation

bizhub C360i/C300i/C250i C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS

bizhub C360i/C300i/C250i D SERVICE TOOL > 1. bizhub C360i/C300i/C250i