KONGTOP 09WT0001 Users Manual

Emergency alarm

Hold down “Call” key for 1 second and press “Moni” key the radio will
emergency alarm.

Call to receiver

Press and hold the “Call” key for 2 seconds. The receiver will ring.

20 20

transceiver

transceiver

Key lock function

Scrambler function

transceiver

transceiver

; ; Select “SE” indicating SE scan; During SE
scan, the transceiver will stay, in the channel with signals.

Wireclone Function

transceiver

Double audio frequency coding

The telphone set has the function of double audio frequency coding. The
number keys or other function keys are directly input in transmitting mode, the
corresponding double audio frequency coding will be sent out. The double
audio frequency coding sent out by function keys are as follows:

Call: Press call to call to your parther

Moni+Call: Emergency alarm, press Moni and
Call key. Emergency alarm on.

Select mode

Press key, the transceiver can between channel and frequeney mode.

Store

In frequency mode select desired frequency or any other items like CTCSS,
DCS. Press then press key. When one channel number need to
store is blinking. Turn encoder to store channel number, press to confirm
and exit.

Delete

1. Delete one store channel

Hold down key and turn on the power.
“DEL?” and stored channel number will display
on LCD. Turn encoder which need to be
deleted, press until “YES?” display, and
press to delete the channel.

2. Delete all setting of frequency mode

Hold down and turn on power until display
“RESET?”, press until display “VFO?”.
Press to confirm and delete all setting of
frequency mode.

3. Delete all setting

Hold down and turn on power until display
“RESET?”, press until display “VFO?”.
Turn the encoder to select “FULL?”, press
to confirm and delete all setting of channel mode.

The starting of ANI function

Press “ + ”key㧘“ANI? 2” will be
displayed on the screen, press key to
display “ON”expressing ANI function has been
started; selection for revolving coding switch;
Press to confirm, press to exit.
Note: The PTT ID content should be
programmed by PC software.

Voice Compander functions

Press“ + ”key㧘“COMP ? 5” will be
displayed on the screen. Press key to
display “ON” expressing voice compander
function has been open; selcetion for revolving
code switch; press key to confirm and
press key to exit.

Tone on and off

Transmission time limit setting

Press “ + ”keyˈand the screen
display “TOT? 8”; press key and turn the
encoder to select “OFF~600S” step to 15S;
Press key to cofirm and press key
to exit.

Display mode seting

Press “ + ”, “DISPL ? 9” will be
displayed on the screen, after press key,
revolving coding switch selcect the display mode
of intercon (VFO/MR/CHANNE);
press to confirm, press EXIT to exit.

ANI function

ANI ? 2