Kongskilde 2800-10, 2800-11, 2800 Double-Fold Series, 2800-12, 2800-14 Owner's Manual
...
2800 Double-Fold
Field Cultivator
Kongskilde
2800 Series
OWNERS MANUAL
Operating Guide
North American Version
*Model may not be exactly as shown.
Kongskilde reserves the right to make changes to product designs and specifications without notice or obligation to rework.
Levelling attachments pictured on above unit sold separatly.
See your local Kongskilde representative for current product
specifications and options.
Index
INTRODUCTION / MACHINE IDENTIFICATION ........................................................................3
TECHNICAL DATA .......................................................................................................................
SAFETY AND ALERTS: .............................................................................................................
PRODUCT SAFETY DECALS ....................................................................................................
PRODUCT SAFETY PRECAUTIONS .........................................................................................
SAFTEY DEVICES FOR FOLDING AND TRANSPORTING IMPLEMENTS: .............................
MAINTENANCE & LUBRICATION ............................................................................................
PARKING THE CULTIVATOR ....................................................................................................
OPERATING INSTRUCTIONS ..................................................................................................
FIELD LEVELLING PROCEDURE OVERVIEW ........................................................................
OPERATING ADJUSTMENTS ..................................................................................................
4
5
6
7
9
10
14
15
17
18
HYDRAULIC TROUBLE SHOOTING CHART ...........................................................................22
DISPOSAL, SALVAGE AND RECYCLING ................................................................................
2
24
INTRODUCTION
This manual has been developed to assist you
in operating and servicing your new Kongskilde
product. Read it carefully: it will provide you with
information that will enable you to obtain years
of dependable service.
Before attempting to operate this equipment,
read, and understand this manual fully and
follow all safety precautions. In addition,
make sure that every individual who operates
or works with this equipment is familiar with
these instructions. Observation of these safety
precautions will make your farm a safer place
to work.
READ THE OWNERS MANUAL BEFORE
OPERATING OR SERVICING THE MACHINE
Machine Identification
The machine manufacturer along with the
model and serial number are provided on the
metal Serial Number Plate located on the front
frame weldment of the centre section.
The CE Label is also affixed near the serial
number plate in accordance with the CE Declaration Certificate.
Please record the model and serial number of
the machine on the registration form provided
in the front of the book and have it ready for ref
erence when making inquiries regarding spare
parts or service information.
If your did not receive a warranty registration
form, contact your dealer and they will obtain
one for you. It is important that the warranty
registration be completed and returned to
Kongskilde to validate the warranty protection
period.
-
3
Technical Data
HEIGHT
WIDTH
LENGTH
T e c h n i c a l S p e c i f i c a t i o n s
Type 2800 - 10 2800 - 11 2800 - 12 2800 - 13 2800 - 14 2800 - 15
Working Width ft/cm
Transport Width ft/cm
Transport Height ft/cm
Inside Wing ft/cm
Outside Wing ft/cm
No of Tines
6”/16cm Spacing 65 71 77 83 89 95
4”/10cm Spacing 101 111 121 131 141 151
Wheels
Center Frame 11 x 15 - 12 Ply 8 Bolt
Wing 9.5 x 15 - 12 Ply 6 Bolt 4 + 2-8Ply 8 8 8 8 8
Gauge Wheel 9.5 x 15 - 8 Ply 6 Bolt
Weight - Vibro Till (lbs)
On 4”/10cm Tine Spacing
Weight - Combi Harrows (lbs)
Weight - Double SS Roller (lbs)
Weight - 5 bar Drag Harrow (lbs)
Weight - Spike Leveller (lbs)
Appr. Hp*
Note: Suggested hp requirements are base on average conditions. Actual requirements depend on working speed and soil condition.
33’2”/1010 36’5”/1110 39’8”/1210 43’0”/1310 46’3”/1410 49’7”/1510
16’/490 16’/490 16’/490 16’/490 16’/490 16’/490
11’2”/340 11’2”/340 12’9”/390 12’9”/390 14’6”/440 14’6”/440
6’7”/200 6’7”/200 8’2”/250 8’2”/250 9’8”/300 9’8”/300
3’3”/100 4’11”/150 4’11”/150 6’7”/200 6’7”/200 8’2”/250
4 4 4 4 4 4
2 4 4 4 4 4
11700 12500 13300 14200 15000 15800
2665 2800 2930 3060 3200 3300
2680 2980 3280 3580 3880 4180
1680 1830 1980 2130 2280 2430
525 550 570 590 610 630
210-250 230-280 250-300 270-320 290-340 310-360
*Model may not exactly as shown.
Kongskilde reserves the right to make changes to product designs and specifications without notice or obligation to rework. Levelling attachments for above unit sold separately. See your local Kongskilde representative for current product specifications and options.
4
SAFETY ALERT SYMBOL:
This safety symbol, is used to call your attention
to instructions concerning the personal safety
of the owner or operator.
WARNING! Do not operate this machine
unless you have read and understood the
instructions and safety information in the
Kongskilde Operator's Manual.
Failure to follow the instructions for safe
operation of the equipment could result
in serious injury or death. Proper care
and operation of this implement is your
responsibility.
Contect your dealer or Kongskilde for
replacement manuals, safety decals and
replacement parts.
SAFETY KEY WORDS & ALERTS:
The key words - DANGER, WARNING and CAUTION used alone or in combination with the Safety
Hazard Alert Symbol in this Operators Manual and on Safety Decals located on the framework
of the machine, are used to identify hazards on or near the implement.
Safety Instructions indicate procedures which must be followed to avoid hazards.
Hazard Alerts are identified by the key word, and the symbol:
DANGER - An immediate hazard which WILL result in severe personal injury or death if the proper
precautions are not taken.
WARNING - A potential hazard or unsafe practice which COULD result in serious personal injury
or death if the proper precautions are not taken.
CAUTION - A potential hazard or unsafe practice which COULD result in personal injury or in
product or property damage if the proper precautions are not taken.
5
SAFETY DECALS:
Safety Decal Locations:
Safety Decals are located on the framework of the implement. The specifiic locations are chosen
to provide optimal visibility to the operator or bystanders. In the case of hidden or obstructed
hazards or safety precautions, the decals may be located on or near the hazard, or other convenient locations near hook-up points, adjustment devices or service points frequently visited by
the operator.
Please read and obey all safety decals on the machine. Ensure they are kept clean and in
good condition. Kongskilde is committed to safety and provides replacement safety decals and
operator manuals at no charge if they become lost, damaged or illegible.
Each safety decal is identified by a part number, and are available through your Kongskilde
Dealer.
IMPORTANT NOTICE:
Kongskilde cannot anticipate every possible circumstance that might involve a hazard with this
product. The hazard alerts and safety instructions in this publication and on the product are
therefore not all inclusive. If a tool, procedure, work method or operating technique not specifi
cally recommended by Kongskilde is used, you must satisfy yourself that it is safe for you and
others. You must ensure that the implement will not be damaged or made unsafe by the operation,
maintenance or repair procedures you choose.
Kongskilde will not be held responsible for any unauthorized modifications made to this
product and will immediatly void the warranty coverage.
-
6
PRODUCT SAFETY PRECAUTIONS
Make certain all safety decals, reflectors
and SMV signs are applied to your machine.
Refer to your local governmental regulations
for more information on proper procedures
and markings for safe road transport in your
area.
IMPORTANT NOTE: This unit has a narrow
transport width and a high centre of gravet
which may pose a tipping hazard when folded
for transport.
Do not transport over 32 kmh (20 M.P.H.)
Reduce speed in adverse weather, when
turning or travelling on inclines or uneven
ground. Always start and stop slowly..
DANGER! Watch for wires.
Take care when transporting, folding or unfolding the implement around power lines. Serious
injury or death to the operator or bystanders
will result through direct or indirect contact with
power lines.
7
The operator is responsible at all times to
comply with the local government regulations
and insure the safe transport of the implement when transporting large or oversized
implements on public or private roadways.
Careful consideration must be given in order
to prevent accidents with other vehicles and
avoid coming in contact with obstacles such as:
bridges, tunnels, overpasses, guard rails, road
signs, traffic lights, power lines, public utilities,
and other structures that may be encountered
along the chosen route. In some jurisdictions the operator may be required to obtain special
permits or arrange for escorts before transporting oversized equipment. Kongskilde is not liable
for personal or property damage caused by inappropriate, unauthorized or unsafe transport or
operation of equipment.
Never unfold when there are bystanders in the
area of the wing fall zone. Be certain all persons
are clear of working area in and around the
machine whenever folding, unfolding, raising
or lowering the machinery or in any way using
the hydraulic system.
Make sure that the tractor is shifted into park
before getting out to remove transport locks and
wing fold lock pins. Never remove wing lock pins
or wheel transport locks when the implement is
sitting on uneven ground where tipping could
occur.
Be alert when walking around the machinery
in the folded transport position to avoid walking
into the point of a shank or sweep. Severe head
or body injury could result.
8
Loading...