Kong GAMPS2-WCONT30 Instructions Manual

GAMPS2-WCONT30

PS2 2.4GHz Wireless

Controller

PlayStation®2 Blue Light Wireless Controller Also works with PSone

and PlayStation®

Your PlayStation®2 Blue Light Wireless Controller includes:

PlayStation®2 Blue Light Wireless Controller PlayStation®2 Wireless Receiver Instruction manual

How to use the 2.4GHz Blue Light Wireless Controller

1- Auto scan mode:

 Place 3 A AA batteries into Blue Light Wireless Controller.  Plug the wireless receiver into the desired game port.  Turn on the console and the controller via the power switch.  The controller will search for a signal and the receiver’s orange LED will illuminate when

the connection has been made. 2- Manual scan mode: If you are unable to get a connection with the B lue Light wireless Controller, you may make the connection using the manual scan mode.

 Press the connect button on the receiver;  Then immediately press select and L3 buttons of controller.

 The orange LED will illuminate to indicate that the connection is a success . This may take

as long as 20 seconds. Note: If 2.4 GHz Wireless Controller does not find a connection, please repeat 1 & 2 all over again to insure that your operation is right. If not again, please check your video gaming console for other issues. Remarks: If your want to use 2.4GHz Blue Light Wireless Controllers. Please connect the 1P-

2.4GHz Wireless Controller and 1P-wireless receiver

Controller Diagram

Directional Pad

The D-Pad controls the direction in which the character moves. This is the primary directional control in digital mode.

Analog Sticks

The two analogs sticks each control two axes (X- and Y-axis). Different ga mes will allow you to modify the way the analog sticks react. While in Analog Mode, any game that is vibration compatible will cause the controller to vibrate at different levels, depending on what actions are taking place in the game (e.g. fighting, crashing, or shooting). Not all games are vibration compatible. Read the game’s instruction manual to find out if it is Vibration Function Co mpatible.

Shoulder Action Buttons (L1, L2, R1, and R2)

These action buttons functions depend on the game being used.

Action Buttons (Circle, Square, Triangle, Cross)

These but tons are used to perform various actions, depending on the game. For more details, see the game’s instruction m anual.

Start Button

This butt on is generally used to make selections in the menu and for starting and pausing the game. For more details, see the game’s instruction manual.

Select Button

This is a standard button that allows you to select various items in the m enu or game, depending on the game. For more details, see the game’s instruction manual.

Mode Button

The controller has two different modes, analog and digital mode. The red LED light will be on when the controller is in analog mode, and off when the controller is in digital mode.

Macro Button

This button allows you to program a complicated move requiring many buttons and recall the move by pushing a single button. See the “Macro Function” section of this instruction manual.

Control Modes and Function

There are two different modes you can choose from, depending on your style of pl ay. You can change modes by pressing the MODE button. The mode LED light will be on or off depending on which mode you are in.

Switching from digital to analog mode:

Analog Mode-When the mode LED light is on; t he controller i s in analog mode. Games that are Vibration Function Compatible will only vibrate if the controller is in analog mode. Digital Mode -When the mode LED light is off, the controller is in digital mode, and the analog function is disabled. This is the standard mode for PSone

and PlayStation®.

Sleep and Wake Function

This product will automatically enter sleep mode after 3 minutes of non-use in order to assist the battery life. To exit sleep mode (Wake), press the "Start" button.

How to Program the Controller:

1. Press the MACRO button until the MACRO LED is illumina ted to indicate that the

programming function is active.

2. Select a button (L2, L3, R2, and R3) to be programmed by pressing that button until the

MACRO LED flashes.

3. Press the desired button(s) or D-Pad position(s) to be programmed into the selected

button above. Each button pressed during this step will be acknowledged by one blink on the MACRO LED. Note: if the maximum numbers of buttons are pressed for programming (16), the PlayStation®2 controller will not accept further input and the MACRO LED will be turn off.

4. Press the MACRO button to turn the programming function OFF when the desired button

assignments are finished. The MACRO LED will turn off.

5. Repeat the procedures above to program another button.

ENGLISH

INSTRUCTIONS

Resetting the controller to default:

To reset the PlayStation®2 controller back to its default settings:

1. Press the MACRO button to turn the programming function. The MACRO LED will be

illuminated indicating that the programm ing function is active.

2. Press the button you wish to reset the MACRO LED will become flashing.

3. Press the MACRO button to turn the programming function OFF. The MACRO LED will

be distinguished.

PSone

PlayStation® and PlayStation®2 are registered trademarks of Sony. This product is not

Kong GAMPS2-WCONT30 Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual