2
secs
or
DESCRIPTION
Konftel 60W converts a system, DECT or cell telephone into a conference telephone using
OmniSound®, Konftel’s unique technology for optimal sound quality. The connection between
the telephone and Konftel 60W can be wireless via Bluetooth®. Konftel 60W can also be
connected to a computer and accessed using communication software, e.g. Skype®. The
handbook and Konftel’s website www.konftel.com offer suggestions for various accessories and
applications.
Adjusting the microphone volume
The microphone volume can be adjusted during the call, but to avoid disturbing
the call, it may be best to adjust it during a test call after the telephone has been
paired.
Press and hold the mute button for 2 seconds until the LEDs start to flash and
you hear a tone.
Increase the microphone volume using + and reduce it using –.
Adjust the microphone volume one level at a time until you can hear well in the
other end. Please note that too high a level may cause echoes and feedback.
Press the mute button to conclude setting the selected microphone volume.
Microphone, 360°
sound recording
Three LEDs
Blue – microphone on
Blue, flashing – pairing
Red – microphone off
On/ off
Answers
a call
-
Reduces
speaker volume
Mute
Switches off
the microphone
+
Increases
speaker volume
Trim
Tunes
the sound quality
Connection cable computer, 4 ft (1.5m)
(60W–computer)
Connection cable electricity, 19 ft (6m)
(60W–plug adapter)
Plug adapter
Connection cable elec
-
tricity–mains socket
Switchbox
(60W–telephone handset)
Cable duct
Sockets for extra
microphones
Power supply
Line connection
Connection cable telephone, 9 ft (3m)
(60W–switchbox)
Only use the accompa
nying Helms-Man plug
adapter
DEN4824129 (Europe)
DPX481821 (USA)
DBN4824129 (UK)
Holes for
wall bracket
Three speakers
For further information, please consult the manual on enclosed CD