Page 1
The Konftel 55W User Guide
ENGLISH
Page 2
OmniSound® HD – superior sound quality
The patented OmniSound® audio technology guarantees an impressive and crystal-clear
full-duplex audio, allowing you to speak in two directions for effective participation in
virtual meetings. The sound is transmitted clearly and powerfully to all attendees thanks
to a hypersensitive microphone with 360° audio pick-up and speakers.
OmniSound® HD delivers HD audio during VoIP calls. It also incorporates automatic echo
cancellation and noise suppression, which minimises background noise interference, and
an equaliser for personal adaptation of the audio properties. This means you can move
about freely in the room, talking, discussing and debating with others without any loss of
audio quality and without any annoying sound clipping, damping or echoes. It's as close to
real sound as you can get.
Konftel AB hereby declares that this conference phone is in conformity with all the essential requirements and other relevant provisions of Directive 1999/5/EC.
Please visit www.konftel.com/doc to read the declaration in its entirety.
Warning!
Do not expose the Konftel 55W to water or moisture.
Warning!
Do not open the casing of the Konftel 55W.
Warning!
Only use the power adapter provided to connect the unit to the mains.
Warning!
Only use batteries from Konftel intended for the Konftel 55W.
2
Page 3
CONTENTS
Introduction 2
Maintenance ................................................................................... 2
Description 3
General ........................................................................................... 4
Bridge connection ............................................................................ 6
Batter y ........................................................................................... 6
Using the Konftel with a desktop phone 7
Connecting to a desktop phone ......................................................... 7
Making calls .................................................................................... 8
Using the Konftel with a mobile phone 9
Cable connection to a mobile phone .................................................. 9
Making calls .................................................................................. 10
Using the Konftel with a computer 11
Connection to a computer ............................................................... 11
Using the Konftel with a computer .................................................. 12
Using the Konftel with Bluetooth 13
Pairing and connecting ................................................................... 13
Connecting a phone that is already paired ........................................ 16
Making calls .................................................................................. 17
Connecting a phone with headset profile ......................................... 20
Using multiple connections 22
Switching between connections ....................................................... 22
Bridge connection 24
Adjusting the volume ...................................................................... 24
Using a headset 26
Bluetooth headset.......................................................................... 26
Recorder capability 27
Recording ..................................................................................... 27
Listening to a recording .................................................................. 28
Settings 29
Changing languages ....................................................................... 29
Adjusting sound effects .................................................................. 30
Changing connection settings ......................................................... 31
Changing system settings ............................................................... 34
Upgrading software 35
Upgrading from a PC...................................................................... 35
Upgrading via an SD card ............................................................... 36
Technical data 37
1
Page 4
INTRODUCTION
The Konftel 55W is a conference unit that can be connected to your desktop phone, your
mobile phone and your computer to obtain crystal-clear, powerful OmniSound® HD audio
in your virtual meetings.
• OmniSound® HD audio technology with full duplex, echo cancellation and static reduc-
tion in full bandwidth (20–24000Hz). (The telecommunications network technology
limits the bandwidth when communicating via the telecommunications network.)
• Support for UC solutions, such as Microsoft® Lync®.
• LCD high-resolution display with touch buttons, where the interface changes according
to the connections you make.
• Mobile phone connection via a mobile cable (accessory) or Bluetooth.
• Connection to a desktop phone via a Konftel desk phone adapter (accessory) which
makes it easy to move the sound between the handset and conference phone.
• USB connection to a computer or another USB device that supports handsfree
connection.
• Automatic detection of USB playback/ VoIP calls, which means that the OmniSound®
HD audio processing feature only processes the sound when necessary. The sound is
not altered when music is played.
• Audio bridge capability between a computer and connected phone.
• Call recorder capability allows you to listen to meetings afterwards or use the Konftel
55W as a dictaphone.
• Battery-powered option, which makes the Konftel 55W completely cordless with a
Bluetooth-connected phone.
• The battery can be charged via the mains supply (power adapter provided) and USB.
• Headset connectivity option allows easy switching between headset and speaker func-
tion.
• Expansion microphones can be added to increase the voice pickup range. (Optional
accessory.)
• Upgradeable.
• Two-year warranty.
MAINTENANCE
Clean the equipment with a soft, dry cloth. Never use liquids.
2
Page 5
DESCRIPTION
On / Off (long press) Mute (microphone off / speaker off )
LEDs
Flashing blue Incoming call via Bluetooth
Steady blue light Sound channel on/call in progress
Steady red light Mute, microphone turned off
Flashing red Hold, microphone and speaker turned off
Expansion microphone port Battery cover
Touch screen
SD memory card port
3
Connections:
Desk phone adapter
Power supply
Mobile phone
Headset (3.5 mm)
Computer (mini USB)
Page 6
DESCRIPTION
GENERAL
The Konftel 55W automatically detects the connections you make. Despite the unit's
multiple connectivity options, it is simple to use and understand because it only displays
the buttons that can be used in that particular situation.
The first time the Konftel 55W is started up, the display only shows a menu button and
a Bluetooth button ( ) which is used for pairing and connecting to a mobile phone. If you
connect to a computer via USB, a button for this is displayed so that you can easily turn
the sound on and off. Similarly, a desktop button is displayed if you connect a desktop
phone, a headset button if you connect a headset and a record button if you insert an SD
memory card.
A lit button indicates that the feature is active. When you press the button, it switches
between on and off.
Support for UC solutions
The Konftel 55W has expanded support for UC solutions, such
as Microsoft® Lync®. Visit www.konftel.com for more information.
LEDs
When a mobile or desktop phone button is activated, the blue
LEDs light up too, indicating that an audio channel is open.
This does not necessarily mean that a call is in progress since
the call is controlled from the connected device (the mobile or
desktop phone).
4
Page 7
DESCRIPTION
On / Off (long press) Mute (microphone off / speaker off)
LEDs
You can move the sound between the Konftel 55W and the phone during a call by
pressing the button ( or ) on the Konftel 55W.
With a computer connection, the LEDs first light up when a communication program that
uses the microphone starts.
With a Bluetooth connection, the blue LEDs first light up when a call is connected. Since
the connection allows communication in addition to the sound, a phone call can be initiated from the Konftel 55W keypad.
Mute button
Press the button (the actual button on the right) to turn the microphone off during
a call.
The LEDs show a steady red light and two buttons are displayed.
Press the button if you also want to turn the speaker off.
The LEDs flash red.
Note that the buttons on the screen disappear after 5 seconds or if you touch the
screen outside the buttons.
Press once again (the actual button on the right or the button on the screen) to turn
the microphone (and speaker) on.
The LEDs show a steady blue light.
Power save mode
The Konftel 55W has several power save mode levels. After five minutes, the background
lighting fades and after 15 minutes the image on the screen is replaced by a clock. Less
time if running on battery power.
Switching off
Hold down the button (the actual button on the left) for three seconds.
Confirm that you want to switch off the Konftel 55W by pressing .
5
Page 8
DESCRIPTION
BRIDGE CONNECTION
It is possible to establish an audio bridge between a connected phone and the computer.
This means that you can make a call with your connected mobile or desktop phone and
combine it with, for example, a Skype® call on the computer.
Audio bridge combinations other than a phone and computer are not possible.
Find out more about audio bridging on page 24.
BAT TERY
The battery is charged in the Konftel 55W, either via the power adapter provided or via
USB. It takes about 4 hours to fully charge an empty battery using the power adapter and
about 5 hours via USB.
The Konftel 55W has to be connected to a USB port that produces power (e.g. on a
computer) in order to charge the battery. Note that it takes much longer to charge via
USB if the Konftel 55W is turned off.
Inserting a battery
Push the battery cover forwards to remove it.
Insert the battery in the Konftel 55W with its contacts towards the pins in the bottom
of the battery compartment.
Slide the battery cover back into place.
6
Page 9
USING THE KONFTEL WITH A DESKTOP PHONE
The Konftel 55W transforms your desktop phone to a conference phone with OmniSound®
HD. Unlike the integrated speaker function of many desktop phones, you enjoy a high
sound level, full duplex (two-way audio) and efficient echo cancellation and noise reduction.
OmniSound® HD performs over the full audio bandwidth (100–24000 Hz) but the
technologies in today's telecommunications networks do not allow the full bandwidth
to be used. This has an effect on the sound quality.
The Konftel 55W is connected using a desk phone adapter (accessory) which is installed
between the phone and handset. The adapter allows you to transfer calls between the
Konftel 55W and the handset by pressing a button.
The Konftel 55W can be connected to all digital phones (corporate networks) and, in
many cases, to analogue phones too (traditional telephone sockets in the home).
Note that some desktop phones can also be connected via their headset jack. See
"Using the Konftel with a mobile phone" on page 9.
CONNECTING TO A DESKTOP PHONE
Unplug the telephone handset cable from the phone and connect it to the desk phone
adapter.
Connect the desk phone adapter to the phone and the Konftel 55W as illustrated below.
The button is displayed on the Konftel 55W.
Make a test call to check that the receiving party has a good sound level (see page 32).
The sound level produced by phones varies between the different makes. The Konftel
55W's microphone level may therefore need adjusting to ensure good sound quality for
the other call participants. The setting is saved in the Konftel 55W and is used each
time a phone is connected via the adapter.
7
Page 10
USING THE KONFTEL WITH A DESKTOP PHONE
MAKING CALLS
You can make a call with the phone as usual and then transfer the call to the Konftel
55W, or transfer the sound before the call is connected.
Press the button on the Konftel 55W to transfer the sound from the phone to the
Konftel 55W.
The button and the LEDs light up.
Lift the handset and dial the number on the desktop phone.
Adjusting the volume
The volume can be adjusted when the phone is active ( is lit up). As is the practice
in the context of telephone communications, it is not possible to turn the sound off
completely using the volume control.
Transferring and ending calls
Press to transfer the sound between the Konftel 55W and the phone's handset.
End the call by placing the handset back on the desktop phone.
The button on the Konftel 55W can remain lit if you want to use the Konftel 55W
for future calls too.
8
Page 11
USING THE KONFTEL WITH A MOBILE PHONE
The Konftel 55W transforms your mobile phone to a conference phone with OmniSound®
HD, ensuring high sound level, full duplex (two-way audio) and efficient echo cancellation
and noise reduction.
OmniSound® HD performs over the full audio bandwidth (100–24000 Hz), but limita-
tions in mobile telecommunications networks reduce the bandwidth somewhat and the
sound is compressed. This has an effect on the sound quality. Calls via updated 3G
networks are more likely to have good audio quality.
Note that it is not possible to use a desktop phone and a mobile phone at the same
time with the Konftel 55W. The desktop phone connection is disabled when the
mobile phone is connected.
CABLE CONNECTION TO A MOBILE PHONE
The Konftel 55W is connected using a cable which is adapted for your phone (optional
accessory). The Konftel 55W works in the same way as a headset connected to the mobile
phone.
Note that some desktop phones can also be connected via their headset jack. The
function is exactly the same as for a mobile phone connection and we only write
"mobile phone" in the description.
Connect the phone to the Konftel 55W using the mobile phone cable.
The button is displayed on the Konftel 55W. The button is immediately activated on connection.
Make a test call to check that the receiving party has a good sound level. See page 32.
The sound level produced by phones varies between the different makes. The Konftel
55W's microphone level may therefore need adjusting to ensure good sound quality for
the other call participants. The setting is saved in the Konftel 55W and is used each
time a phone is connected via a mobile cable.
Automatic detection of mobile phone
The Konftel 55W can normally detect when a mobile phone is connected via a cable.
Some mobile phones do not activate the connection until a call is connected or they put
the connection to the Konftel 55W/headset to sleep after a certain period of inactivity. If
this is the case, the button will not be displayed until you make a call from your mobile
or receive an incoming call.
If you want ( ) to be visible all the time and your mobile phone does not automatically
activate the connection, you can change the setting so that the button is always displayed,
whether or not your mobile phone is connected (see page 31).
9
Page 12
USING THE KONFTEL WITH A MOBILE PHONE
MAKING CALLS
Check that the button on the Konftel 55W is lit up blue. If it is not lit up, press the
button.
Dial the number on the mobile phone.
If you have a call in progress on your mobile and want to transfer it to the Konftel
55W, simply connect the cable.
Adjusting the volume
The volume can be adjusted when the phone is active ( is lit up). As is the practice
in the context of telephone communications, it is not possible to turn the sound off
completely using the volume control.
Hold
Press to put the call on hold (microphone and speaker turned off).
Transferring calls
Remove the cable from the mobile phone to transfer the sound from the Konftel 55W
to the phone.
Ending calls
End the call on the mobile phone.
The button on the Konftel 55W can remain lit if you want to use the Konftel 55W
for future calls too.
10
Page 13
USING THE KONFTEL WITH A COMPUTER
The Konftel 55W transforms your computer to teleconferencing equipment with
OmniSound® HD. Unlike normal computer speakers and microphones, the Konftel 55W
provides full duplex (two-way audio) and efficient echo cancellation and noise reduction.
The computer identifies the Konftel 55W as an echo cancellation device which means that
communication software usually leaves the audio processing to the Konftel 55W, resulting
in better sound quality. This can also be manually adjusted, for example in Skype®.
OmniSound® HD performs over the full audio bandwidth (100–24000 Hz), but
depending on the equipment in the network and equipment used by the other call
participants, there may be some factors that limit the sound quality.
CONNECTION TO A COMPUTER
Connect the computer to the Konftel 55W using the USB cable provided.
The button is displayed on the Konftel 55W. The button is immediately activated on connection.
The computer's operating system normally automatically selects the Konftel 55W as a
speaker and microphone. If the Konftel 55W is not automatically selected as an audio
device in the computer, you may have to open the computer's settings and select
Konftel 55.
If you have an active software program in the computer that is using the computer's
built-in speakers, it may be necessary to restart the program to switch to the new
speaker (Konftel 55W).
11
Page 14
USING THE KONFTEL WITH A COMPUTER
USING THE KONFTEL WITH A COMPUTER
Using as a computer speaker
USB is immediately activated on connection ( lights up).
The computer normally only activates the speaker in the Konftel 55W if there is no other
program running that can use the microphone. This means that the Konftel 55W acts as a
computer speaker and that the audio processing in OmniSound® HD is turned off so that
the sound is not altered.
Using the Konftel as a conference unit
When communication software or audio recording software is started on the computer, the
Konftel 55W microphone is also activated. OmniSound® is now handling full duplex and
echo cancellation. The blue LEDS on the Konftel 55W also light up at the same time.
To make a VoIP call, use Skype®, Microsoft® Lync®, an online meeting service or some
other VoIP (Voice over IP) software.
Adjusting the volume
The volume can be adjusted on the computer and on the Konftel 55W.
Press the button on the Konftel 55W to turn the sound off quickly.
12
Page 15
USING THE KONFTEL WITH BLUETOOTH
Practically all mobile phones have Bluetooth and can be used for wireless communication with the Konftel 55W. Bluetooth must be activated in the mobile phone's settings.
Note that it is also possible to connect to certain desktop phones and computers with
Bluetooth, but these may not have support for dialling numbers, for example, from the
screen on the Konftel 55W. Also see “Connecting a phone with Headset Profile” on page 21.
OmniSound® HD performs over the full audio bandwidth (100–24000 Hz), but limita-
tions in the telecommunications networks and in Bluetooth technology reduce the
bandwidth somewhat and the sound is compressed. This has an effect on the sound
quality.
Note that Bluetooth in the Konftel 55W can be turned off. If no button is marked on
the display screen, open the settings and activate Bluetooth.
PAIRING AND CONNECTING
Two devices have to be paired before they can communicate with Bluetooth. They can be
paired from the Konftel 55W and from your mobile phone.
Note that a conflict may arise if you try to pair from both devices at the same time. We
recommend searching from one device only.
You must know the names of the devices that you want to pair in case there are lots of
active Bluetooth devices nearby. The name of your Konftel 55W can be changed in the
settings.
Turn Bluetooth on in your mobile.
This normally makes the phone visible to other Bluetooth devices and even starts a search on
some phones.
Press the button on the Konftel 55W to open the dialogue box with paired devices.
This makes the Konftel 55W visible to other Bluetooth devices.
13
Page 16
USING THE KONFTEL WITH BLUETOOTH
Option 1: pair and connect from your mobile
Start a search on your mobile.
Select the Konftel 55W (the name of your Konftel 55W) from the list of devices found.
(It may take a while for the devices to find one another.)
The devices are paired and usually automatically connect to one another. You may need to initiate
a connection on some phones.
You will now see the name of your mobile phone on the list of paired devices in the Konftel 55W,
followed by , which indicates that it is connected.
Press the back arrow in the dialogue box of paired devices in the Konftel 55W.
The Konftel 55W returns to the main screen. Now is lit up and to the left of it you will see
which you can use to dial phone numbers. You will also see the name of your connected mobile
phone on the display screen.
14
Page 17
USING THE KONFTEL WITH BLUETOOTH
Option 2: pair and connect from the Konftel 55W
Press on the Konftel 55W to start a search and add your mobile phone (it has to be
set as being “visible”).
Select your phone from the list of devices found and press .
You may also have to confirm on your mobile phone that you want to pair it with the
Konftel 55W.
If your mobile phone does not support the Secure Simple Pairing protocol, you might
be asked for a PIN code. The code for connecting to the Konftel 55W is 0000.
The devices are paired and then automatically connect to one another. The Konftel 55W returns
to the main screen. Now is lit up and to the left of it you will see which you can use to
dial phone numbers. You will also see the name of your connected mobile phone on the display
screen.
15
Page 18
USING THE KONFTEL WITH BLUETOOTH
CONNECTING A PHONE THAT IS ALREADY PAIRED
A pairing means that the phone and the Konftel 55W save information about one another.
This information is saved, even if the connection is broken.
The connection is broken if:
• The devices are far apart (Bluetooth has a range of about 10 metres).
• You turn off Bluetooth in your mobile or in the Konftel 55W.
• You decide to break the connection in the Konftel 55W ( ).
The next time your mobile and the Konftel 55W are within range of one another, you will
not need to pair them. Simply connect.
Press the button to open the list of paired devices.
If the Konftel 55W is connected to another phone, the button is displayed with .
Select your phone from the list and press .
Your phone is reconnected to the Konftel 55W.
Bluetooth has to be turned on in your mobile. You can make the connection from your
mobile phone if you wish.
If you have a call in progress on your mobile phone, it is transferred to the Konftel 55W.
Some mobile phones try to connect automatically to a paired handsfree (Konftel 55W)
when you make or receive a call.
16
Page 19
USING THE KONFTEL WITH BLUETOOTH
MAKING CALLS
Option 1:
Dial the number on your mobile phone.
The LEDs on the Konftel 55W light up and the sound comes from the Konftel. Some mobile
phones let you select whether the sound comes from your mobile or headset (Konftel 55W).
Option 2:
Press and dial the number on the Konftel 55W.
Your mobile phone rings the number. The LEDs on the Konftel 55W light up and the sound comes
from the Konftel.
Answering incoming calls
Answering on the Konftel 55W.
The LEDs on the Konftel 55W light up and the sound comes from the Konftel.
The call comes to your mobile if you answer it there. The Konftel 55W displays the
button that you can use to transfer the call to the Konftel.
17
Page 20
USING THE KONFTEL WITH BLUETOOTH
Transferring calls between a mobile phone and the Konftel 55W
Your mobile phone is connected to the Konftel 55W and a call is in progress.
Press on the Konftel 55W.
The LEDs on the Konftel 55W go out and the sound is transferred to the mobile phone.
The button is replaced by .
Press to transfer the sound back to the Konftel 55W.
If you wish to continue your call on your mobile and end the connection to the Konftel
55W, first transfer the call by pressing then press and and .
The connection to your mobile phone is broken and the Konftel 55W can be connected to another
phone.
Connecting and transferring a mobile call in progress
Your mobile phone is paired but not connected to the Konftel 55W. You have a call in
progress on your mobile phone.
Press the button to open the list of paired devices.
Select your phone from the list and press .
The LEDs on the Konftel 55W light up and the sound comes from the Konftel.
Using the keypad during a call
Sometimes you may have to send digit codes during a call, e.g. to connect to a conference
service.
You can do this from your mobile phone or from the Konftel 55W.
Press .
Press the digits and return to the main screen by pressing .
18
Page 21
USING THE KONFTEL WITH BLUETOOTH
Adjusting the volume
You can adjust the volume during a call. The sound level of a call will be the same as for
the previous call. You can adjust the level on the Konftel 55W and your mobile. As is the
practice in the context of telephone communications, it is not possible to turn the sound
off completely using the volume control.
Ending calls
Press to end the call or end the call from the mobile.
19
Page 22
USING THE KONFTEL WITH BLUETOOTH
CONNECTING A PHONE WITH HEADSET PROFILE
Some desktop phones that can be connected via Bluetooth, have only limited support for
Headset Profile. This means, for example, that it is not possible to dial the number on the
Konftel 55W.
The Konftel 55W detects which Bluetooth profile is supported by the phone and configures the interface accordingly.
When the phone is connected via Bluetooth with Headset Profile, a button with the
symbol is displayed.
Making calls
Press the phone’s headset button or press the button on the Konftel 55W to
transfer the sound to the Konftel.
The LEDs on the Konftel 55W and the button light up and the connection tone is heard there.
Dial the number on the phone.
20
Page 23
USING THE KONFTEL WITH BLUETOOTH
Ending calls
Press the phone’s headset button or press the button on the Konftel 55W to end
the call.
Switching between the phone and the Konftel 55W
Lift the phone’s handset.
Press the phone’s headset button or press the button on the Konftel 55W to
transfer the call.
Incoming calls
This can work in two ways, depending on the phone that is connected.
Option 1:
The Konftel 55W rings and the LEDs start to flash.
Press the button on the Konftel 55W or on phone’s headset button.
The LEDs on the Konftel 55W and the button light up and the sound comes from the
Konftel.
It is also possible to lift the phone’s handset to answer and get the sound in the
handset.
Option 2:
The Konftel 55W rings. The LEDs and the button light up.
Press the button on the Konftel 55W or on phone’s headset button.
The button remains lit and the call is connected.
It is also possible to lift the phone’s handset to answer and get the sound in the
handset.
21
Page 24
USING MULTIPLE CONNECTIONS
You can have a phone connected via Bluetooth and a phone connected via a phone
adapter or mobile cable at the same time. Buttons for both the phones are displayed on
the Konftel 55W. Calls can be made or answered from either phone.
SWITCHING BETWEEN CONNECTIONS
Activate the desired connection by pressing the corresponding button. Any previous active
connections will be parked, which is indicated by the button flashing.
Bluetooth and cable-connected phone
For example: you have a call on your desktop phone and are using the Konftel 55W.
The Bluetooth-connected mobile phone starts to ring. The ring signals are audible from the Konftel
55W, the LEDs are flashing blue and and are displayed.
Press to answer the incoming call.
The existing call is parked and the button flashes.
Incoming Bluetooth call.
Press which is flashing to return to the first call.
The second call is put on hold and now becomes a flashing .
Bluetooth call is active.
Desk phone is put on hold.
The button flashes.
22
Desk phone call is active.
Bluetooth is put on hold.
The button flashes.
Page 25
USING MULTIPLE CONNECTIONS
Bluetooth with Headset Profile
You can have a phone connected via Bluetooth with Headset Profile and a phone
connected via a mobile cable or phone adapter at the same time. However, this functions
slightly differently than when the Bluetooth phone supports all hands-free features.
For example, if you have an ongoing mobile call with a cable-connected phone and you
answer an incoming call via Bluetooth, the ongoing mobile call is put on hold as illustrated
below. You can switch between the mobile call and the Bluetooth call by pressing the
button or .
Ongoing mobile call and
incoming Blueto oth call.
Bluetooth call is active.
The mobile phone is put on
hold.
The button flashes.
23
The mobile phone is active.
The Bluetooth call is put on
hold.
The button flashes.
Page 26
BRIDGE CONNECTION
When bridging a computer and a phone, all you need to do is activate both sources of
sound. OmniSound® HD can handle full duplex, echo cancellation and noise reduction for
both the sound sources simultaneously.
Press and (depending on which phone is connected) press or . Or make a call
via your Bluetooth-connected phone.
Both buttons are lit up and the sound from the computer and phone is audible from the Konftel 55W.
The volume control gets two level indicators.
ADJUSTING THE VOLUME
The general sound level for the call is adjusted in the normal way by pressing on the right
or left-hand side of the volume button.
Adjusting the level of each sound source individually
The sound from the computer and your phone can have different levels. If each sound
source is adjusted individually, all the voices in a call will be heard clearly.
Press the button on the top of the volume control.
The volume control is divided into two volume controls.
24
Page 27
BRIDGE CONNECTION
Adjusting the sound individually for each sound source.
Return to just one volume control by pressing the button on the top of the upper
volume control.
The Konftel 55W saves the set level when a sound source is turned off. The next time
the same sound source is activated, it is started at the most recently used volume.
25
Page 28
USING A HEADSET
The Konftel 55W has a headset port (3.5 mm plug).
See the heading Headset under settings (page 33) if your headset does not work with
the Konftel 55W.
There is also a headset sound level setting, which allows the level of sound to be
adjusted so that it seems as powerful as from the speakers.
Warning!
Use of headphones/earbuds at high volumes can damage your hearing.
Connect your headset to the Konftel 55W.
The button is displayed on the Konftel 55W and the sound is transferred to the connected
headset.
Press to switch between sending the sound to the headset or to the Konftel 55W.
BLUETOOTH HEADSET
It is also possible to connect a headset wirelessly with Bluetooth. See page 13 for a
pairing description. When the headset is connected the button in the picture above is
replaced by the button .
Press to switch between sending the sound to the headset or to the Konftel 55W.
Note that it is not possible to use a Bluetooth headset together with another Bluetooth
device.
26
Page 29
RECORDER CAPABILITY
The Konftel 55W can be used to record your meetings and for dictations. The recordings
are saved on a memory card. Folders are automatically created on the card with the
date of the recordings. These are saved in WAV format with the time when the recording
started.
The Konftel 55W supports SD and SDHC cards. Recording capacity is 35 hours per GB
on the memory card.
RECORDING
Always make sure that the conference call participants do not object to a meeting
being recorded. The participants you call will hear an audible signal at regular intervals to let them know that the call is being recorded.
Inserting an SD memory card in the Konftel 55W.
The right-hand side of the MENU button is now a recording button •.
Press • to start recording.
The recording button flashes red and the recorded time is displayed.
Press the recording button
The recording is saved on the SD card.
again to stop recording.
•
27
Page 30
RECORDER CAPABILITY
LISTENING TO A RECORDING
You can transfer the card to a computer to play back and edit the recording, or you can
play it back on the Konftel 55W.
Press MENU and select Recordings.
A list of the recordings on the SD card is displayed.
Press the recording you want to listen to.
You can pause the playback by pressing and move forwards and backwards 10 seconds
by pressing and .
You can move to any part of the recording you like by pressing on the time line above the
buttons.
Adjust the sound level using the buttons and .
You can delete the highlighted recording using the button.
28
Page 31
SETTINGS
Press MENU.
The menu opens.
CHANGING LANGUAGES
Press Language in the menu.
Select a language from the list and press the back arrow .
29
Page 32
SETTINGS
ADJUSTING SOUND EFFECTS
Press Sound in the menu.
Make your settings by pressing the buttons and end with the back arrow .
Ring level
This setting is only for incoming calls via Bluetooth.
Key tone
There is a choice of off, discreet and a slightly louder click sound.
Recording indication
To let people know that a call is being recorded when you call them, an audible signal is
heard at regular intervals. This recording indication can be turned off.
30
Page 33
SETTINGS
CHANGING CONNECTION SETTINGS
Press Connection in the menu.
Make your settings by pressing the buttons and end with the back arrow .
Mobile phone connection
The Konftel 55W can normally detect when a mobile phone is connected via a cable.
Some mobile phones do not activate the connection until a call is connected. If the
mobile phone that is connected is like this and you want the sound activation button on
the Konftel 55W to be visible all the time, you should select I instead of Auto.
Bluetooth
It is possible to turn off Bluetooth if you do not want the Konftel 55W to be able to
connect wirelessly to any phone. Any paired telephones are saved and displayed next time
Bluetooth is turned on. Turning off Bluetooth will save the battery power of your Konftel
55W if it is running on battery.
Desk phone adapter configuration
This setting is only shown if a phone adapter is connected.
The telephone manufacturers have different ways of using the pins in the phone handset
connectors. If the adapter does not work with your phone, you may need to change the
configuration of the pins by moving this setting from 1 to 2.
Activate and lift the handset of you connected phone to check if the phone adapter
is working.
You should hear the connection tone in the Konftel 55W.
31
Page 34
SETTINGS
Desk phone adapter microphone level
This setting is only shown if a phone adapter is connected.
The level of sound sent by phones to the receiving party varies between the different
makes. It may be necessary to adapt the microphone level to the telephone in order to
adapt this sound level so that the Konftel 55W provides optimal performance and the
other participants enjoy quality sound.
The setting is saved in the Konftel 55W and is used each time a phone is connected via
the phone adapter.
Activate and make a test call with your phone.
Open the Connection setting in the menu and adjust the outgoing sound until you
find the optimal level.
When speaking directly into your phone, use the sound as a reference level.
If the other party finds it hard to hear the sound, try increasing the level of the
outgoing sound from 0 to +1 or +2.
If the other party finds the sound loud but distorted, try decreasing the level of the
outgoing sound from 0 to -1 or -2.
Mobile phone microphone level
This setting is only shown if a mobile phone is connected with a cable.
The level of sound sent by mobile phones to the receiving party varies between the
different makes. It may be necessary to adapt the microphone level to the mobile
telephone in order to adapt this sound level so that the Konftel 55W provides optimal
performance and the other participants enjoy quality sound.
The setting is saved in the Konftel 55W and is used next time a mobile phone is
connected. Note that since the levels can vary from one make to another, it may be necessary to make a new adjustment when other mobile phones are connected.
The basic setting 0 works satisfactorily for most mobile phones, but this setting allows
you to fine tune the sound.
Activate and make a test call with your mobile phone connected to the Konftel 55W.
Open the Connection setting in the menu and adjust the outgoing sound until you
find the optimal level.
When speaking directly into your mobile phone, use the sound as a reference level.
If the other party finds it hard to hear the sound, try increasing the level of the
outgoing sound from 0 to +1 or +2.
If the other party finds the sound loud but distorted, try decreasing the level of the
outgoing sound from 0 to -1 or -2.
32
Page 35
SETTINGS
Headsets
This setting allows you to adapt the headset port for different headsets.
Most headsets with a 3.5 mm plug have three (mono) or four (stereo) interfaces with the
microphone's connector furthest out on the top. If your headset does not work, it may be
because it has another position on the interfaces.
Headset level
Sensitivity (audio volume) can vary from headset to headset. It is therefore possible to
adjust the volume so that the sound heard seems to be about the same level as when
heard via the speakers.
Warning!
Use of headphones/earbuds at high volumes can damage your hearing.
A higher volume may be harmful to hearing if you have a high-sensitivity
headset.
Note that for safety reasons, this setting is reset when you remove your headset. This
is because another headset that is connected may be more sensitive.
Feature layer
Using this setting, you can select your preferred UC solution or choose to turn the function
off. Microsoft® Lync® is selected by default, which means that if the Konftel 55W detects
that the Lync® client is being used by the computer, Lync® feature layer will be displayed
on the Konftel 55W.
33
Page 36
SETTINGS
CHANGING SYSTEM SETTINGS
Press the System button on the menu.
Make your settings by pressing the buttons and end with the back arrow .
Here you can:
• Change the name of your Konftel 55W (this name is displayed when pairing with
Bluetooth)
• Set the time and date for recordings
• Check software versions
• Initiate software upgrades
• Restore your Konftel 55W to factory settings, thereby deleting all settings and saved
values.
34
Page 37
UPGRADING SOFTWARE
The Konftel 55W is continually being developed with smart features and the software
can be upgraded to ensure the unit is always running the latest software version. You can
upgrade via a USB or via an SD card.
Note that in upgrade mode, the text is always in English whatever language has been
selected in the the Konftel 55W. The same applies to the software Konftel Upgrade
Utility.
UPGRADING FROM A PC
This method requires a PC with Microsoft® Windows®.
Installing Konftel Upgrade Utility
Visit www.konftel.com/upgrades and select Konftel 55W.
Download Konftel Upgrade Utility.
Install the software on your computer.
Follow the instructions given by the installation program.
Updating software
Connect your Konftel 55W to the computer using the USB cable.
Press MENU, select System.
Press the Upgrade button and confirm by pressing to reboot in upgrade mode.
The Konftel 55W restarts in upgrade mode.
Press Use USB when the Konftel 55W reboots.
Start Konftel Upgrade Utility on your computer.
Follow the instructions that the software guide gives you.
35
Page 38
UPGRADING SOFTWARE
We recommend that you let Konftel Upgrade Utility automatically download and install
the latest version from Konftel’s website. You can also install a Konftel firmware file
that has already been downloaded to the PC’s hard drive.
UPGRADING VIA AN SD CARD
This method requires a computer with an SD card reader.
Downloading upgrade files
Visit www.konftel.com/upgrades and select Konftel 55W.
Download the latest software version for the Konftel 55/55W.
Copy the file (with .kt extension) to an SD card.
Updating software
Insert the SD card with the software file in the Konftel 55W.
Press MENU, select System.
Press the Upgrade button and confirm by pressing to reboot in upgrade mode.
The Konftel 55W restarts in upgrade mode.
Press Use SD when the Konftel 55W reboots.
Follow the instructions that are displayed on the Konftel 55W.
36
Page 39
TECHNICAL DATA
Size Width 222 mm, depth 206 mm, height 68 mm.
Weight 640 g.
Colour Liquorice black and silver.
Display Colour LCD, 240x320 pixels.
Buttons Touch screen plus on/off and microphone switch-off.
Memory SD (SDHC) memory card support.
Upgrading Konftel upgrade utility (for Microsoft® Windows®) upgrades
Konftel 55W software via the USB connection. It is also
possible to upgrade via an SD card.
Power supply
AC adapter Phihong PSC12R, 100–240 V AC/12 V DC.
Battery (optional) 3,7 V 2260 mAh Li. Ion-Polymer.
The battery in the Konftel 55W is charged using the AC
adapter or the USB cable.
Connectivity
USB USB 2.0 Mini B. For computer connection.
Mobile phone Modular 6P6C DEC. For connection to headset jack (optional
cable required).
Desktop phone Modular 8P8C. For connection to an IP or TDM desktop phone
using a Konftel phone adapter (optional). Some desktop
phones can be connected directly to the phone with a special
cable.
Headsets 3.5 mm phone plug (TRS/TRRS).
Bluetooth Bluetooth 2.1 + EDR. For connection to a mobile phone or
other equipment that supports the “Bluetooth Handsfree
profile” or “Bluetooth headset profile” and acts as an audio
gateway.
Expansion microphones 2 modular 4P4C.
Sound
Technology OmniSound® HD.
Microphone Omnidirectional.
Coverage range Up to 30 m2.
Frequency range 100-24000 Hz.
Volume 90 dB SPL 0.5 m.
37
Page 40
TECHNICAL DATA
Environment
Temperature 5°–40°C.
Relative humidity 20–80% condensation free.
Recommended acoustics
Reverberation period 0.5 S Rt 60.
Background noise < 45 dBA.
38
Page 41
Konftel is a leading company and the world’s fastest growing brand, within audio
conferencing equipment. Since 1988, our mission has been to help people around
the world to conduct meetings despite distances. Based on our success, we know that
audio conferencing is a great way to save time, money and at the same time contribute
to a better environment. High audio quality is essential for efficient meetings, this is why
our patented audio technology OmniSound®, is built into all Konftel Conference phones.
The products are sold globally under the Konftel brand and our head-quarter is based
in Sweden. Read more about the company and products on www.konftel.com
Head office: Konftel AB, Box 268, 901 06 Umeå, Sweden
Tel: +46 (0)90-70 64 89, Fax: +46 (0)90-13 14 35, info@konftel.com www.konftel.com
110165 Rev 4A
Loading...