REG02 – International – US (MINUS CANADA)
FRONTCOVER
ENGAGE 2
BLUETOOTH HEADPHONES
WITH ACTIVE NOISE CANCELLING
User Manual
INNER LEAF
Please read this manual carefully before use.
WARNING
• Please do not get the product wet. If your product is IP rated, please follow guidelines on
how to safely use your product overleaf.
• Please don’t take the product apart. There are no user serviceable parts inside
• Please don’t modify or alter the product or accessories
• Please don’t expose the product to extreme temperatures or rapid changes of hot to cold or
vice versa
• Please don’t use damaged cables or plugs, or loose electrical sockets
• Please don’t touch the device, cables, plugs, or the electrical socket with wet hands or other
wet body parts
• Please don’t pull the cable excessively when disconnecting it if the cable is not fixed
• Please don’t bend or damage the cable
• Please don’t drop or cause an impact to the product or the device
• Please don’t place naked flame sources, such as lighted candles, on the product
Protect your hearing and ears when using a headset
• Excessive exposure to loud sounds can cause hearing damage
• Exposure to loud sounds while walking may distract your attention and
cause an accident
• Always turn the volume down before plugging the earphones into an audio source and use only
the minimum volume setting necessary to hear your conversation or music
QA-MRK-FM-07-02 v1
• In dry environments, static electricity can build up in the headset. Avoid using headsets in dry
1
2
3
4
5
6
7
8
9
10
environments or touch a metal object to discharge static electricity before connecting a headset
to the device
• Do not use a headset while driving or riding. Doing so may distract your attention and cause an
accident, or may be illegal depending on your region
Battery Information
• Batteries may malfunction if they are not used for extended periods
• Over time, unused devices will discharge and must be recharged before use
• Disconnect the charger from power sources when not in use
• Use the batteries only for their intended purposes
• Follow all instructions in this manual to ensure the longest lifespan of your device and battery.
Damages or poor performance caused by failure to follow warnings and instructions can void
your manufacturer’s warranty
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like
• Please do not dispose of the battery in a fire or an oven, or mechanically crush or pierce the
battery, as this may result in an explosion.
• Please do not subject the battery to extremely low air pressure, which may result in an explosion
and/or the release of flammable liquid or gas
Box contents
Box contents
Box contentsBox contents
• KS Engage Bluetooth Headphones with Active Noise-Cancelling
• 3.5 mm aux cable
• USB charging cable
• User manual
Functions
1. Micro USB Charging Port
2. Battery LED
3. ANC Function Button
4. ANC LED Indicator
5. Volume+/Next track
6. Multi-Function Button (MFB)
7. Volume-/Previous track
8. Aux Port
9. LED Indicator
10. Microphone
Instructions for use
Getting started
Charging the battery
QA-MRK-FM-07-02 v1
Answer a call
Short p
ress MFB (
6
) to answer. You can adjust the volume by using
Reject a call
Hold MFB (
6
) to reject the incoming call
End call
Press MFB (
6
) while in the call to end it
Play/Pause
Press MFB (
6)
Adjusting the volume
Press Volume+ (5) or Volume
– (7). The volume can al
so be
Changing track
Press and hold
Next track (5)
or
Previous
track (
7)
Give the headphones a full charge before their first use.
1. Connect the Micro USB Charge Cable to the Micro USB Charging Port (1) and plug into power
2. The Battery LED (2) will be red whilst charging which will take up to 2 hours
3. Once fully charged the Battery LED (2) will turn green
Note: The first charge may take up to 2 hours to complete.
Pairing the headphones to your device
1. Hold the MFB (6) down for 5 seconds. You will see the LED Indicator (9) flash red and blue and
enter pairing mode
2. Turn on your iOS, Android, or Windows device’s Bluetooth ON and search for new devices
3. Select KSENGAGE2 from the list of found devices. If asked for a passcode, enter ‘0000’ or ‘1234’
and the device will pair
4. Once connected, an audio tone will sound and the LED Indicator (4) will flash white. You can then
answer the phone or listen to your music
Note: The next time you switch the headphones on they will automatically search for and attempt to
connect to the last paired device
Re-pairing or pairing new devices
1. Turn Bluetooth connectivity off on any previously paired devices
2. Follow the ‘Pairing the headphones to your device’ instructions from step 1
Call handling
Volume+ (5) or Volume– (7)
Playing music
Bluetooth
controlled on your device
Wired use
1. Turn off the headphones
2. Plug the 3.5 mm aux cable into the headphone’s Aux-in Port (8) and the other end into your
device
[HEADPHONES ONLY]
Note: All functions are controlled via your device.
QA-MRK-FM-07-02 v1
Specifications
Bluetooth® technology v
5.0
Bluetooth connectivity distance
up to 10 m
Frequency
band
2.402GHz
-
2.480GHz
Transmission power
+1 dBm
(conducted)
S/N ≥
80 dB
Frequency response
20 -
20, 000 Hz
Drivers
40mm
Output RMS
6mW
Battery
LiPo
Play time
Bluetooth with ANC off play time
- 22 hours
Charging time
Up to
2 hours
Working temperature
-10℃
to +45
℃
Headphone
(mm)
H210 x W
180 xD80
Cable length
1.3 m
Weight
246g
‘Hereby, Kondor Ltd declares that the radio equipment type,
Engage 2
, is in compliance with
Troubleshooting
We hope you've now got all the information you need to get started, but if you're having problems
with anything, please feel free to contact us at: support@kitsound.co.uk
Bluetooth with ANC on play time - 13 hours
Wired use with ANC on play time - 33 hours
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address: http://kondor.co.uk/product-documents.’
FCC ID: 2ADFF- KSENGA2
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device and ISM equipment, pursuant to part 15 of the FCC Rules respectively. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
QA-MRK-FM-07-02 v1
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help
The use and operation of this product is beyond our control. Warranty of the Engage 2 is limited to
defects caused by faulty manufacture or defects in materials only. No warranty whatsoever is given
or implied for damage caused by the user under any circumstances.
This does not affect your statutory rights.
Please do not attempt to open this product. There are no user serviceable parts inside. If your
product has an embedded, non-replaceable battery, do not attempt to access or remove the
battery. This may cause personal injury and will damage the product.
Making any attempt to open the product or carry out repair voids any and all warranties.
We are sorry for any inconvenience caused by minor inconsistencies in these instructions, which
may occur as a result of product improvement and development.
BACKCOVER
kitsound.co.uk
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
and any use of such marks by Kondor Ltd. is under license. Other trademarks and trade names are
those of their respective owners.
All trademarks are acknowledged as the property of their respective owners. Unless otherwise
stated their use does not imply that the trademark owner is affiliated with KitSound or endorses the
products herein.
Products showing the ‘Crossed Through’ wheelie bin symbol must be recycled separately from
household waste at the end of their useful life. Please DO NOT dispose of this appliance in normal
household waste. Your local appliance retailer may operate a ‘take-back’ scheme when you are
ready to purchase a replacement product, alternatively contact your local government authority for
further help and advice on where to take your appliance for recycling.
Please recycle this packaging responsibly.
QA-MRK-FM-07-02 v1
JB. 7054-a/REG02/ KSENGA2/Made in China. © KitSound is a trademark of Kondor Limited, 2019.
Christchurch, Dorset, BH23 4FL, UK
QA-MRK-FM-07-02 v1
Loading...