Konan Labs KLT-100RG-6 User Manual

MINI SIX GOBO PATTERNS TWINKLING

LASER SHOW SYSTEM

User's Manual

Light up your stage, disco, club, party, dj, Xmas, home, room, decoration place!

Read this manual before using. Do not attempt to open the housing or repair

this device by yourself without contact us!

General instructions Troubleshooting

1. If the power supply indicator doesn't light up and the laser doesn't work, please

Unpacking: check the power supply, the input voltage and the fuse.

Thank you for purchasing this product. Please read user guide for safety and before using

2. In Stand-Alone operation, if the power supply indicator is light up and sound

the product. Keep this manual for future reference. This product can create perfect laser

active indicator isn't light up, but the laser is shut off doesn't work.

programs and effects since it has passed a series of strictly tests before delivery. Please check

A. Because sound is too small make for laser shut off in sound active, please

the attachments listed on the page after opening the carton. Immediately upon receiving

increase the music volume or increase audio sensitivity with sensitivity knob,

a fixture, carefully unpack the box. Check the box contents to ensure that all parts are present

please check as below.

and that they are in good condition. If any part appears damaged from shipping, or if the 3. If the unit is fail, please turn off the unit, then turn on again after 5 minutes.

box shows signs of mishandling, notify the shipper immediately. In addition, retain the box

and all the packing material for inspection.In any event, save the carton and all packing material After trying the above solution you still have a problem, please contact your dealer

because, in case that you have to return the fixture to the factory, you will have to do so in its

or our company for service.

original box, with its original packing.

1. Laser Light: 1PCS

2. Power Adaptor: 1PCS

3. User Guide: 1PCS

4. Tripod 1PCS

Safty Notice:

Please read the following notes carefully because they include important safety information

about the installation,usage and maintenance of this product. It is important to read all these

notes before starting to work with this product.

Page 1 Page 6

Lasers can be hazardous and have unique safety consideratio ns. Permanent eye injury and

blindness is possible if lasers are used incorrectly . Pay close attention to each safety REMARK and

WARNING statement in the user manual. Read all instructions careful

There are no user serviceable parts inside the light. Any reference to servicing this unit you
may find from now on in this User Manual will only apply to properly C we certified
technicians. Do not open the housing or attemp t any repairs unless you are o

Please refer to all applicable local codes and regulations for proper
installation of the light.

Keep this manual for future consultation. If you sell the light to another user,
make sure that they also receive this manual.