Kompernass PKGS 1450-KH 3118 User Manual

PKGS 1450

2003

Kompernaß Handelsgesellschaft mbH
Burgstraße 21 · D-44867 Bochum (Germany)



























M







b

a

def

c















www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++

!

www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++

PKGS 1450 CROSSCUT MITRE SAW

For crosscut, mitre and compound sawing

Dear Customer! Please make sure you familiarise yourself fully with the way the equipment works before you use it
for the first time and that you understand how to handle electrical power tools correctly. Please read the operating
instructions below and the accompanying safety advice carefully . Use the equipment only as described
and for the purposes indicated. By doing this you will be able to work in complete safety and produce better results.
We hope you enjoy using your saw.

PROPER USE

Sawing of solid wood, chipboard, plastic and aluminium. Please note that the blade pre-installed in the saw as
supplied is intended for sawing wood only. Any other use or modification to the saw shall be considered as improper
use and could give rise to considerable dangers.

FEATURES OF THE PARKSIDE PKGS 1450



M

Motor  Stop setting handle

 Cutting head (cast aluminium)  Speed pre-selector wheel
 Dust extraction outlet
 Quick-set angle adjuster List of accessories (Fig. )
 Stop plate (cast aluminium) (a) 2 transverse support stirrups (also )
 Transverse support stirrup (b) dust extraction bag
 Holding down bolt holes (c) 2 G clamps
 Actuating handle (d) 2 carbon brushes (see "Maintenance")
 Saw table (cast aluminium) (e) Allen key
 Control lever with setting (f) Fastening and locking spanner

indicator arrow

TECHNICAL INFORMATION

Nominal power: 1450 W Protection class: II
Nominal voltage: 230 V ~ 50 Hz Sound pressure level: Lp = 095.5 dB(A)
Nominal speed: n
Weight: 14,5 kg Vibration: 2.5 m/s

0 - 4,200 /min Sound power level: Lw = 108.5 dB(A)

o

4

2