6
PAPER SHREDDER
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH4405-07/08-V1
KH 4405
PAPER SHREDDER
Operating instructions
KH 4405
KH 4405
qwer
t
u
y
CONTENT PAGE
Intended Use 2
Important safety instructions 2
Technical data 3
Items supplied 3
Appliance description 3
Commissioning 3
Operation 3
Emptying the waste container 4
Cleaning 5
Disposal 5
Warranty & Service 5
Importer 6
Troubleshooting 6
Read these operating instructions carefully before using the appliance for the first time and preserve this
maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.
- 1 -
PAPER SHREDDER
KH 4405
Intended Use
This Shredder is intended exclusively for the
shredding of paper, credit cards and CD’s.
All other usages or modifications are regarded
as contrary to the operating instructions and
contain a considerable risk of accidents.
Important safety instructions
The following safety instructions must always be
complied with when using electrical appliances:
• Do not place the appliance in close vicinity to
sources of heat and water source .
• Do not use the appliance close to inflammable
or explosive materials and/or ignitable gases
or in dusty environments.
• Do not use the appliance outdoors.
To avoid potentially fatal electric
shocks:
• Should the power cable or the plug become
damaged, arrange for it/them to be repaired
by authorised specialists or Customer Services
as soon as possible.
• Arrange for damaged or malfunctioning appliances to be inspected and/or repaired by a qualified specialist or the Customer Service Department as soon as possible.
• Do not expose the appliance to rain and never
use it in a humid or wet environment.
• Ensure that the power cable never becomes
moist or wet during operation.
To avoid the risk of personal injury:
• The Shredder should be used by only one person at a time.
• Never leave the appliance unsupervised during
use.
• Keep loose clothing , long hair and jewellery etc well away from the cutter opening.
• NEVER place your fingers into the cutter opening
.
• NEVER place a finger into the central hole of a
CD when you are feeding it into the appliance.
• Keep pets away from the appliance. They could
injure themselves.
• This appliance is not intended for use by individuals
(including children) with restricted physical,
physiological or intellectual abilities or deficiences
in experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
• The packaging material can be a source of danger for children. Dispose of the material immediately after unpacking or keep it in a safe place
not accessible to children.
• Lay the power cable in such a way that no one
can tread on or trip over it.
- 2 -
Tips for safety:
• Place the appliance in the immediate vicinity of
an electrical power socket. Do not use an extension cable. Ensure that the appliance and the power socket are easily and quickly accessible in
the event of an emergency.
• Never overburden the appliance. The paper
shredder is designed for brief operating
periods.
• In cases of danger, immediately remove the electrical plug from the socket.
• NEVER use the shredder for tasks for which it
was not designed.
• Always be attentive! Always pay attention to
what you are doing and act with common
sense. Never use the appliance when you are
distracted or don’t feel well.
Technical data
Voltage: 220-240 V~50Hz
Rated current: 1,5 A
Protection class: II
Cutting process for
Paper: Crosscut, 4 x 23mm particles
Working width: 223 mm
CO time: 3 Minutes
CO Time
The C.O. Time (Continuous Operation) details how
long an appliance may be used without the motor
overheating and being damaged. After the appliance
has run for for this period it must be switched off until
the motor has cooled itself down.
Items supplied
Appliance description
Cutter attachment
q
Switch
w
Cutter opening for CD/Credit cards
e
Cutter opening for paper
r
Large waste receptacle (Paper)
t
Power cable
y
Small waste receptacle (transparent) /
u
Viewing window
Commissioning
• First of all, place the cutter attachment qonto
the large waste receptacle
cable
side.
• Slide the small waste receptacle
in the opening on the front side of the large waste receptacle
• Connect the paper shredder to a power socket.
is located at the rear, i.e. on the closed
y
.
t
so that the power
t
for plastics
u
Operation
Switching the appliance on:
• Place the switch
shredding.
Inserting paper:
• Insert paper from above and in portrait format
into the cutter opening for paper
The motor starts automatically and switches itself off
automatically if no further paper is inserted. You
can shred up to 5 sheets (80g/m
same time.
to the position for
w
r
2
paper) at the
.
Shredder KH 4405
Operating Instructions
- 3 -
Inserting credit cards:
• Open the safety flap over the cutter opening for
CD/Credit cards
• Insert the credit card from above into the middle
of the CD/Credit card cutter opening
can only shred one credit card at a time. ALWAYS
insert them into the CD/Credit card cutter opening
with the broad side leading. If you do not,
e
the magnetic strip will not be destroyed.
e
.
. You
e
Note: Always insert the credit card into the
middle of the cutter opening
the shredding process will not start!
Inserting a CD:
• Insert the CD from above into the middle of the
CD/Credit card cutter opening
shred one CD at a time.
. If you do not,
e
. You can only
e
Warning!: NEVER place a finger into the cen-
tral hole of a CD when you are feeding it into
the appliance.
Emptying the waste container
• Empty the waste container t/uregularly.
• Dispose of the waste material in an environmentally responsible manner.
Emptying the large waste container
(Paper)
Important: Remove the power plug from the
wall socket to avoid an unintended starting of the
appliance.
• Remove the cutter attachment
waste container
• Remove the small waste container
of the large waste container
not fall out.
• Empty the large waste container
everything back together again.
Emptying the small waste container (Plastic)
t
.
from the large
q
at the front
u
, so that it does
t
and then put
t
Clearing a material blockage:
• Press and hold the switch
the item to be shredded become jammed.
The appliance now goes into reverse and the
material to be shredded is returned.
• Place the switch
soon as the jammed item is returned.
Switching the appliance off:
• To switch the appliance off, move the switch
into the middle position (OFF).
w
in position should
w
into position (OFF) as
• Remove the small waste container
front of the large waste container
• Replace it after emptying it.
Notice regarding overheating of the
appliance:
If it overheats, the appliance switches itself off
automatically.
Important: Remove the power plug from the
w
wall socket to avoid an unintended starting of
the appliance.
• Empty the waste containers
• Allow the appliance to cool down.
• Reinsert the power plug into the socket.
• Switch the appliance on, in that the switch
is placed in the position .
- 4 -
t/u
from the
u
to empty it.
t
.
w
Cleaning
Warranty & Service
Danger! Always remove the power plug
before cleaning the appliance. There is a
risk of electric shock!
Warning!! The cutters in the appliance are
very sharp! Risk of personal injury!
• Empty the waste containers t/uregularly.
• Clean the waste containers
attachment
and, if required, with a mild detergent.
• Remove possible residues in the cutter openings
e/r
ance is unplugged before commencing this!
with a lightly moistened cloth
q
with a suitable object. Ensure that the appli-
t/u
and the cutter
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved disposal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally responsible manner.
The warranty for this appliance is for 3 years from
the date of purchase. This appliance has been
manufactured with care and meticulously examined
before delivery. Please retain your receipt as proof
of purchase date. Should a claim need to be made
under the warranty, please make contact by telephone with our service department. Only in this
way can a post-free despatch for your goods be assured.
The warranty covers ONLY claims for material and
maufacturing defects, not for wearing or consumable or for damage to fragile components. This product is for private use only and is not intended for
commercial applications.
The warranty will become void in the event of abusive and improper handling, use of force and internal
tampering not carried or approved by our authorized service branch. Your statutory rights are not restricted in any way by this warranty.
DES Ltd
Units 14-15
Bilston Industrial Estate
Oxford Street
Bilston
WV14 7EG
Tel.: 0870/787-6177
Fax: 0870/787-6168
e-mail: support.uk@kompernass.com
Irish Connection
Harbour view
Howth
Co. Dublin
Tel: 00353 (0) 87 99 62 077
Fax: 00353 18398056
e-mail: support.ie@kompernass.com
- 5 -
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
Troubleshooting
If the material to be shredded jams:
This means that you have attempted to feed too
much material into the appliance
(max. 5 sheets 80g/m
max. 1 CD/DVD).
• Place the switch
to be shredded become jammed. The appliance
now goes into reverse and the material to be
shredded is returned.
• Place the switch
soon as the jammed item is returned.
If the appliance suddenly ceases operation:
This means that the appliance has overheated and
the automatic safety cut-out has activated itself.
2
paper, max. 1 credit card,
in position should the item
w
in position (OFF), as
w
If the appliance doesn`t allow itself to be switched on:
• Check that the plug is correctly connected to a
wall socket.
• Try out a different wall socket.
• The appliance is probably defective. Have the
appliance checked by qualified specialists.
When the appliance is switched on,
however, the shredding process will not start:
• The appliance has overheated and triggered the
automatic safety switch-off.
Important: Remove the power plug from the
wall socket to avoid an unintended starting of
the appliance.
• Allow the appliance to cool down.
• Replace the power plug into the socket.
• Switch the appliance on, in that the switch
is placed in the position .
The cutter attachment
• Place the cutting attachment
position.
is not correctly placed.
q
in the correct
q
w
Important: Remove the power plug from the
wall socket to avoid an unintended starting of
the appliance
• Allow the appliance to cool down.
• Reinsert the power plug into the socket.
• Switch the appliance on, in that the switch
is placed in the position .
w
- 6 -
Loading...