Safety Notices2
Intended Use2
Technical data3
Items supplied3
Appliance description3
Taking into use3
Operating positions4
Working with kneading hooks, beaters and whisks 4
Working with the food processor5
Working with the mixer6
Cleaning and care7
Troubleshooting7
Disposal7
Warranty & Service8
Importer8
Recommended filling quantities9
Read these operating instructions carefully before using the appliance for the first time and preserve this
maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.
- 1 -
FOOD PROCESSOR
KH 701
Warning: Never submerse the appliance in
water or other liquids. Danger of electrical
shock!
Safety Notices
Danger of electrical shock!
• Ensure that the power supply to be used tallies
with the details on the model details plate.
• Ensure that the power cable never becomes wet
or moist whilst in use.
• Always place the power cable so that it cannot
be trapped or otherwise sustain damage. Do not
allow the power cable to hang from the work
area.
• Should the power cable or plug be damaged, to
avoid possibly life-threatening risks immediately
arrange for it to be replaced by qualified specialists
or the customer services department.
• Remove the plug from the wall socket when the
appliance is not in use, before cleaning it and if
it malfunctions. Switching off the appliance is not
sufficient because the appliance receives power
as long as the power plug is connected to the
socket. You can thus avoid unintentional switch-on
of the appliance. After power-outages the appliance
continues to run!
• Do not operate the appliance without ingredients.
Risk of overheating!
• This appliance is not intended for use by individuals
(including children) with restricted physical,
physiological or intellectual abilities or deficiences in experience and/or knowledge unless
they are supervised by a person responsible for
their safety or receive from this person instruction
in how the appliance is to be used.
• Children should be supervised to ensure that they
do not play with the appliance.
Risk of personal injuries!
• Caution: the cutting and rasping discs and the
mixing knives are very sharp!
• Take care with their installation and removal, as
well as when cleaning them!
• Attention: When the machine is running, only
insert into the mixing bowl, food processor or
the mixer the ingredients to be processed.
• To avoid personal injury and damage to the
appliance, NEVER insert or place your hands or
foreign objects into the loading shaft or in the
mixer.
• Only exchange accessories when the drive has
come to a complete standstill.
• After being switched off, the drive continues to
run for a short time!
• NEVER leave the appliance unsupervised.
Intended Use
The appliance is intended for the processing of foodstuffs
in private-domestic quantities and intended only for
use in private houselholds, in enclosed spaces
protected from the elements.
The appliance is not intended for use in commercial
or industrial applications or for use outdoors. The
appliance may only be used with original accessories.
- 2 -
Technical data
Appliance description
Mains voltage:220–240V/50Hz
Power consumption: 550 W
max. capacity
Mixing bowl:ca. 3,8 l
Mixer:ca. 1,5 l
Items supplied
Food Processor KH 701
Stainless steel mixing bowl with lid
Mixer with lid and funnel
Food processor with stodger
Cutter turning disc (thick and thin)
Rasper turning disc (coarse and medium-fine)
Rubbing disc (fine)
Kneading hooks with
Beater
Whisk
Accessory holder
Assembly material
Operating Instructions
dough deflecter
Kneading hooks with dough deflecter
q
Mixing beater
w
Whisk
e
Mixer with lid and funnel
r
Accessory holder
t
Mixing bowl with lid
y
Food processor
u
Rubbing disc
i
Rasper turning disc
o
Drive shaft for food processor
a
Cutter turning disc
s
Lid with stodger for the food processor
d
Unlocking button
f
Turn-switch
g
Swivel arm
h
Drive motor
j
Recesses for the mixing bowl
k
Cable storage compartment
l
Taking into use
• Before taking the appliance into use, check that
all listed items are present and that there are no
visible damages on/to them.
• Remove all packaging materials from the appliance.
• Before the first usage thoroughly clean all component parts as described in the section „Cleaning
and care“.
• Place the appliance on a flat and clean surface.
• Secure the appliance to the surface with the four
suction discs.
• Remove the power cable from the cable storage
compartment l (Fig. 6).
• Insert the plug into the power socket.
- 3 -
Operating positions
Important: Only operate the appliance when
accessories are attached and in the operating
positions shown in this table. NEVER operate the
appliance without ingredients.
PositionAccessories
1
2
3
Positioning of the mixing bowl
4
Utilisation of kneading hooks,
beaters and whisks
To prepare the appliance for work with kneading
hooks q, beaters eand whisk w, proceed as
follows:
• Press the unlocking button fand bring the swivel
arm hinto operating position 4 (see chapter
„Operating positions“) (Fig. 1).
• Insert the mixing bowl y. The base of the mixing
bowl ymust engage in the recesses kon the
appliance.
• Press the unlocking button fand bring the swivel
arm hinto operating position 1 (see chapter
„Operating positions“) (Fig. 1).
• Place and hold turn-switch gin position P, until
the drive motor jremains stationary in the park
position (Fig. 2). Should the drive motor not
move it is already at the park position.
• Press the unlocking button fand bring the swivel
arm hinto operating position 4 (see chapter
„Operating positions“) (Fig. 1).
• Depending on the task to be performed, insert
the kneading hooks q, beaters eor whisks wso
that they firmly engage in the drive jmotor.
Note: The kneading hooks qare fitted with a
pastry deflector. Turn the pastry deflector until the
kneading hooks qcan engage (Fig. 3).
• Place the ingredients to be processed into the
mixing bowl y.
5
Insertion of large amounts to be
processed
Working with kneading hooks,
beaters and whisks
Note: The appliance may only be used when
the drive openings not being utilised are
covered with drive protection lids.
Note: Pay heed that during the kneading
and/or mixing process the pastry in the mixing
bowl increases in volume, or is pressed upwards
through the rotary movement. Take note of the
table in the chapter „Recommended filling
quantities“.
• Press the unlocking button fand bring the swivel
arm hinto operating position 1 (see chapter
„Operating positions“) (Fig. 1).
• Place the lid onto the mixing bowl y.
• Set the rotary switch gto the desired level.
- 4 -
Risk of injury from rotating parts!
NEVER reach into the mixing bowl when it is in use.
Working with the food
processor
Only change accessories when the drive motor
is at standstill! After being switched off, the drive motor
continues to run for a short time. The appliance
j
may only be used when the drive openings not
being utilised are covered with drive protection lids.
In cases of malfunction switch the appliance off and
remove the plug from the wall socket, this will avoid
an unintentional switching-on of the appliance.
Refilling with ingredients
• Turn the appliance off with the rotary switch g.
• Turn the rotary switch gto P and hold it firmly
until the drive motor jcomes to a standstill (Fig. 2).
• Remove the lid.
• Press the unlocking button fand bring the swivel
arm hinto operating position 5 (see chapter
„Operating positions“).
• Refill with ingredients or insert the ingredients
through the refill opening in the lid.
On task completion
• Turn the appliance off with the rotary switch g.
• Turn the rotary switch gto P and hold it firmly
until the drive motor jcomes to a standstill (Fig. 2).
• Remove the lid.
• Press the unlocking button fand bring the swivel
arm hinto operating position 4 (see chapter
„Operating positions“).
• Remove the accessories from the drive motor j.
• Remove the mixing bowl y.
• Clean all parts (see chapter „Cleaning and
care“).
j
Note: Ensure that on the swivel arm hneither the
kneading hooks q, the whisk enor the mixing
beater ware attached.
Proceed as follows to prepare the appliance for
operation with the food processor u:
• Press the unlocking button fand bring the swivel
arm hinto operating position 4 (see chapter
„Operating positions“) (Fig. 1).
• Insert the mixing bowl y. The base of the mixing
bowl ymust engage in the recesses kon the
appliance.
• Press the unlocking button fand bring the swivel
arm hinto operating position 1 (see chapter
„Operating positions“).
• Remove the drive protection lid for the food
processor u(Fig. 4).
• Insert the food processor uwith the drive shaft
into the drive opening (The marking on the
a
food processor uto the marking on the swivel
arm h) and turn it clockwise as far as it will go
(Fig. 5).
• Remove the lid with stodger d.
• Depending on the task to be performed, place
the cutting s, rasping oor rubbing idisc onto
the drive shaft aof the food processor. (Fig. 5).
• Place the lid with stodger don the food processor
and latch it down (Fig. 5).
u
• Set the rotary switch gto the desired level.
Note: Do not press too many ingredients in the
food processor u. Take note of the table in the
chapter „Recommended filling quantities“.
• Insert ingredients through the loading shaft with
the stodger d.
- 5 -
Risk of injury from rotating parts!
To avoid personal injury and damage to the appliance, NEVER insert or place your hands or foreign
objects into the loading shaft. Only insert
ingredients by use of the stodger.
Only change accessories when the drive motor
is at standstill! After being switched off, the drive motor
continues to run for a short time. The appliance
j
may only be used when the drive openings not
being utilised are covered with drive protection lids.
In cases of malfunction switch the appliance off and
remove the plug from the wall socket, this will avoid
an unintentional switching-on of the appliance.
On task completion
• Switch the appliance off with the rotary switch g.
• Turn the food processor uanti-clockwise and
remove it.
• Disassemble the food processor uand clean all
parts (see chapter „Cleaning and care“).
j
Working with the mixer
Risk of scalds!
Allow hot fluids to cool to a hand-warm temperature
(ca. 30–40°C) before they are poured into the
mixer r.
Proceed as follows to prepare the appliance for operation with the mixer r:
• Press the unlocking button fand bring the
swivel arm hinto operating position 3 (see
chapter „Operating positions“).
• Remove the drive protection lid for the mixer
(Fig. 7).
• Fit the mixer r(Marking on the base onto the
marking on the base machine) and turn it
anti-clockwise as far as it will go (Fig. 8).
• Fill with ingredients.
Maximum amounts: 1 litre;
foaming liquids, maximum 0,5 litre; optimal
processing amount for solids: 50–100 g
Note: Take note of the table in the chapter
„Recommended filling quantities“.
• Place on the lid with funnel and press it down
firmly (Fig. 9).
• Set the rotary switch gto the desired level.
Risk of injury from sharp knife/rotating
drive!
NEVER reach into the mixer rwhen it is in use!
Remove/place the mixer ronly when the drive
motor jis at stillstand! Only use the mixer
with the lid firmly in position.
In cases of malfunction switch the appliance off and
remove the plug from the wall socket, this will avoid
an unintentional switching-on of the appliance.
Refilling with ingredients
• Turn the appliance off with the rotary switch g.
• Press the button on the handle of the mixer r,
remove the lid and fill with ingredients
or
• remove the funnel and slowly refill with solids
through the refill opening (Fig. 10)
or
• refill with fluid ingredients by means of the
trichter (Fig. 11).
On task completion
• Switch the appliance off with the rotary switch g.
• Turn the mixer rclockwise and remove it.
Note: The mixer ris best cleaned immediately
after use (see chapter „Cleaning and care“).
r
- 6 -
Cleaning and care
Troubleshooting
Danger of electrical shocks!
Warning: Never submerse the appliance in
water or other liquids.
Attention!
DO NOT use any abrasive cleaning agents.
Remove the power plug.
Wipe the appliance with a damp cloth. If
necessary, use a mild detergent.
Afterwards, dry the appliance completely.
Clean the stainless steel mixing bowl y, food
processor uand accessories.
Clean all accessories, the stainless steel mixing
bowl yand the food processor uin water with
some mild detergent. Rinse them with clear water
and dry them well. The accessories, the stainless
steel mixing bowl yand the food processor uare
NOT suitable for a dishwasher.
Cleaning the mixer
Risk of injury from the sharp knife!
Do not handle the mixer knife with bare hands.
If the appliance suddenly ceases operation:
The appliance has overheated and triggered the
automatic safety switch-off.
• Place the rotary switch gat 0.
• Remove the plug from the wall socket.
• Allow the appliance to cool for 15 minutes.
• If, after 15 minutes, the appliance has not yet
cooled off completely, it will not start.
• Wait a further 15 minutes and try switching on
again.
If the appliance does not switch itself on:
• Check to see if the plug is in the power socket.
• Check to see if the drive protection lids for the
mixer rand food processor u, the mixing bowl
and the lid are correctly placed and properly
y
engaged.
• Check to see if the swivel arm his in the required
position (see chapter „Operating positions“).
Should the measures described above not provide
a solution, then the appliance is defective. Arrange
for the appliance to be repaired in a qualified
specialist workshop or by customer services.
Attention!
DO NOT use any abrasive cleaning agents.
For cleaning, put some water with detergent into the
assembled for use mixer r.
Switch the mixer ron for a few seconds. Pour out
the cleaning solution and then rinse the mixer
with clear water. Possible residues can be removed
with a dishwashing brush.
r
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved disposal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of packaging materials in an
environmentally responsible manner.
- 7 -
Warranty & Service
Importer
The warranty for this appliance is for 3 years from
the date of purchase. This appliance has been
manufactured with care and meticulously examined
before delivery. Please retain your receipt as proof
of purchase date. Should a claim need to be made
under the warranty, please make contact by telephone with our service department. Only in this
way can a post-free despatch for your goods be
assured.
The warranty covers ONLY claims for material and
maufacturing defects, not for wearing or consumable or for damage to fragile components. This product is for private use only and is not intended for
commercial applications.
The warranty will become void in the event of abusive and improper handling, use of force and internal
tampering not carried or approved by our authorized service branch. Your statutory rights are not
restricted in any way by this warranty.
DES Ltd
Units 14-15
Bilston Industrial Estate
Oxford Street
Bilston
WV14 7EG
Tel.: 0870/787-6177
Fax: 0870/787-6168
e-mail: support.uk@kompernass.com
*1: Use the rough side of the raspel or cutter turning disc.
*2: Use the fine side of the raspel or cutter turning disc.
*3: The maximum volume for yeast dough amounts to 1.5 times the given recipe.
*4: The maximum volume for biscuit pastry amounts to 1.5 to 2 times the given recipe.
- 9 -
30 sec.
6 min.
1
2
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.