Kompernaß GmbH · Burgstrasse 21 · D-44867 Bochum
www.kompernass.com
ID-Nr.: 526-07-2006-V1
UK
KH525_IB_UK 06.07.2006 10:15 Uhr Seite 1
Blender KH 526
Instruction Booklet
KH525_IB_UK 06.07.2006 10:16 Uhr Seite 2
KH525_IB_UK 06.07.2006 10:16 Uhr Seite 3
KH 526
KH525_IB_UK 06.07.2006 10:16 Uhr Seite 4
KH525_IB_UK 06.07.2006 10:16 Uhr Seite 5
KH525_IB_UK 06.07.2006 10:16 Uhr Seite 6
- 3 -
KH 526
Blender
Introduction 4
Proper use 4
Technical data 4
Description 4
Before start-up 4
Safety 5
Important safety instructions 5
To avoid life-threatening electric shocks: 5
In order to avoid the danger of fire and/or injuries: 5
A safe approach: 6
Operation 6
Installing the mixing unit 6
Food processing 6
Selecting the suitable speed level. 6
Utilizing the whole range of applications 7
Useful tips 8
Cleaning 8
Disposal 9
Information 9
Keep this manual for future reference and pass it on with the equipment to any
future users.
KH525_IB_UK 06.07.2006 10:16 Uhr Seite 3
- 4 -
KH 526
Blender KH 526
Introduction
Estmeemed Customer,
Our products are designed to fulfil the
highest requirements of quality, functionality, and design. We hope that you will
enjoy using your new “BIFINETT“ appliance.
Proper use
The appliance is suitable for mixing, pureeing, kneading/ stirring and emulsifying various types of foodstuffs. This appliance can be used even to cut and
crush ice.
You will find the exact procedures and
corresponding output levels in the section entitled “Food processing”.
Cores, large seeds and stems/ stalks must
be removed before feeding the foodstuffs into the appliance.
Only original attachments and accessories, as described , may be used.
Any other usage or changes count as
contrary to instructions and harbour
great danger of accidents. The manufacturer takes no responsibility for damage(s) arising out of usage that is contrary
to the instructions laid down.
Not for commercial use.
Technical data
Rated voltage: 220-240 V ~
50 Hz
Rated output: 600 Watt
KB time: 2 Minutes
Capacity of the
mixing unit: 1.7 l
Max. capacity: 1.5 l
Description
Measuring cup
Lid
Mixing unit
Cutting blade
Mounted motor unit
Switch
Before start-up
Carefully clean all the component
parts before using the blender for the
first time. (see section: Cleaning).
Connect the appliance to the power
source.
KH525_IB_UK 06.07.2006 10:16 Uhr Seite 4
- 5 -
Safety
Important safety instructions
The following safety instructions must
always be adhered to when using electrical appliances:
These directions will help you avoid
severe injuries and/or heavy damage(s),
and enable you to achieve better results
and/or output.
Please read the following information
regarding safety measures and appropriate usage carefully. Open the page with
the illustrations before you begin
reading and make yourself familiar with
all the functions of the appliance.
Preserve these directions carefully and
pass them on, if and when necessary, to
others too.
To avoid life-threatening electric shocks:
• The voltage of the power source must
match the stipulations given on the
plate with the details of the model
affixed to the appliance. Appliances
requiring 220-240 V.
• Never immerse the mounted motor
unit in water. Wipe it instead with a
damp cloth to clean it.
• Never operate the appliance with a
damaged connecting cable or power
plug. Immediately have the damaged
connecting cables and/or appliances
that do not function optimally, or were damaged, inspected and repaired
by the authorized customer service.
• Do not expose the appliance to the
rain and never use it in a humid or
wet environment. Make sure that the
cable never gets damp or wet while
the appliance is in use.
In order to avoid the danger of fire
and/or injuries:
• Never leave the appliance unattended
whilst in use.
• Caution! Keep children away from the
connecting cable and the appliance.
Children frequently underestimate
the danger from electrical appliances.
Ensure a safe location for the
appliance.
• Ensure that the power plug is quickly
reachable in case of danger, and also
that there is no danger of tripping
over the cable.
• In order to avoid injuries, make sure
that all the component parts are properly connected and installed.
• Ensure that the lid is properly secured
before switching on the appliance.
• Never use the appliance with an empty mixing unit.
• Never remove the lid while the appliance is in use.
• Danger of injury! The cutting blade is
very sharp. Handle it with extreme
caution.
• Do not touch any rotating parts.
• Turn the appliance off after use and
pull out the power plug. Only when
the motor has come to a complete
stop may the appliance be disassembled.
• Never use the appliance:
- if individual components, the con-
necting cable or the power plug are
damaged,
- in case of malfunctioning of the
appliance, or if it has been otherwise
damaged or has fallen down.
• Give the appliance for examination
and/or repair only to an authorized
service outlet.
KH 526
KH525_IB_UK 06.07.2006 10:16 Uhr Seite 5
- 6 -
KH 526
• The use of attachments and accessories that are not recommended or
sold by the manufacturer can cause fire, electric shocks and/or injuries.
A safe approach:
• In case of danger, immediately pull
out the power plug from the power
point.
• Never use the appliance for purposes
other than those for which it was designed.
• Always stay attentive! Always pay attention to what you are doing and act
rationally. Never use the appliance
when you are distracted or don’t feel
well.
• Make sure that the appliance is correctly and completely assembled before you use it.
• The appliance may be used only after
it has been assembled as per the instructions, and when the cover is firmly fitted on and closed.
• Each time you have finished using the
appliance, make sure that the switch
is in the “Off” position.
• Remove the detachable parts only
when the motor has come completely
to rest.
• Detach the power plug and cable
from the appliance when it is not in
use, when you detach parts or before
cleaning the appliance.
• Do not use the appliance in the open.
• Allow hot liquids to cool to a lukewarm temperature (approx. 30-40°C)
before you pour them into the mixing
unit. You thus avoid the risk of burns.
Operation
Installing the mixing unit
Make sure that the appliance is
switched off (Switch in the “Off”
position).
Place the mixing unit on the mounted
motor unit and press it down till it is
securely engaged.
Food processing
Fill the mixing unit with the food-
stuffs, which are to be processed.
Place the cover on the mixing unit
and secure it firmly. In order to lock
the measuring cup, insert it into the
opening in the cover and twist it
clockwise till it locks.
Turn on the motor.
Note: This appliance works only when
the mixing unit is attached to the
motor unit.
Selecting the suitable speed level.
• Level 1-3
for light usage with liquids
• Level 3-5
for a firmer consistency – for the
mixing of liquids and solid foods.
• Moment Level
for use in short, powerful bursts.
(The switch does not stay in the
“Ice Crush” position. Hold the switch
down in the “Ice Crush” position or
turn it repeatedly to the “Ice Crush”
position.)
KH525_IB_UK 06.07.2006 10:16 Uhr Seite 6
After using the appliance turn the
switch to the “Off” position and pull out
the power plug.
In order to remove the mixing unit, pull
it straight up. It does not need to be
turned.
Notice: After every use check the cutters
for their funtionality.
Utilizing the whole range of
applications
Application: Mixing:
All kinds of liquids, (1) beverages, (2) warm
soups
Level: 1-3
max. quantity: (1) 1.5 litres
(2) 1.25 litres
Time: 40-60 seconds
Application: Pureeing:
Vegetables, fruit,
gravies and sauces, baby food
Level: 5
max. quantity: 1.3 kg
Time: 1.5 - 2 Min.
- 7 -
Application: Kneading and
stirring (1)
pancake dough
(2) yoghurt,
beverages and
desserts
Level: (1) 5
(2) 4-5
max. quantity: (1) 1.3kg
(2) 650 g
Time: (1) 1 Min.
(2) 1.5 - 2 Min.
Application: Emulsifying
Level: 5
max. quantity: 2 eggs
30g-400g oil
Time: 1-2 Min.
Application: Cutting and crus-
hing ice
Level Ice Crush/5
max. quantity: 180g ice cubes
(= approx. 7 cubes)
Time: as required
Directions:
Feed the ice cubes into the mixing
unit whilst the motor is off; secure the
cover and then switch the motor on.
KH 526
KH525_IB_UK 06.07.2006 10:16 Uhr Seite 7
- 8 -
Useful tips
In order to get the best results while
pureeing solid ingredients, gradually
feed only small portions into the
mixing unit instead of filling it at
once with a large quantity.
When you want to process solid
foods, cut them into small pieces
(2-3 cm).
While mixing with solid foods, begin
with a small quantity of liquid.
Gradually add more liquid through
the cover opening to the mixed mass.
Always place your hand only on top
of the mixer while using it.
Danger of burns!
Be careful with hot liquids.
For the kneading of solid or semi-
solid foods we recommend that the
appliance be used in the Ice
Crush/Clean mode in order to prevent
the cutting blade from seizing.
Cleaning
Rinsing out the installed mixing unit
Empty the mixing unit and fill it with
water. Place it on the motor unit and
turn the switch repeatedly to the Ice
Crush/Clean position. Empty the
mixing unit and rinse it out till it is
clean. Possible residues on the walls
of the mixing unit can be removed
with a dishwashing brush.
Important: In most cases, the mixing unit
is now already hygienically clean.
With stubborn/dried on soiling the mix
container can be cleaned in the dishwasher. The mix container is suitable for
dishwashers
Thorough cleaning of the cutters
Should the cutters not be clean despite
having been in the dishwasher, you can
dismantle the mixing unit and clean the
cutters individually.
Ensure that the mixing unit is comple-
tely empty before removing the cutters. Take care in the handling of the
cutters.
Make sure that the appliance is switched off and that the power plug is
removed from the power socket. First
remove the mixing unit from the mounting on the motor unit.
KH 526
KH525_IB_UK 06.07.2006 10:16 Uhr Seite 8
- 9 -
Warning: Risk of injury! Due to the
sharp cutting blades and the glass
mixing unit proceed with great care.
Remove the measuring cap from the
lid and place the mixing unit on the
lid, so that the underside is facing
upwards.
Insert the locking snibs of the measu-
ring beaker in the rabbets of the
locking ring on the underside of the
mixing unit.
Turn the measuring beaker counter-
clockwise.
Remove the locking ring.
With great care remove the cutters
and the sealing washer.
Danger of Injuries: Clean the cutters very
carefully. They are very sharp.
After Cleaning
Replace the sealing washer, the cut-
ters and the locking ring to their
positions.
Insert the locking snibs on the measu-
ring beaker in the rabbets of the
locking ring on the underside of the
mixing unit.
Turn the measuring beaker clockwise,
so that the locking ring once again
sits firmly on the mixing unit.
The mixing unit can again be uptur-
ned and the measuring beaker placed
onto the lid.
Disposal
Do not dispose of the device in
normal domestic waste.
Dispose of the device over a registered
waste disposal firm or through your
communal waste disposal facility.
Observe the currently valid regulations.
In case of doubt, consult your waste disposal facility.
Information
Service
Please refer to the guarantee card for
the Authorized Service Outlet in your
country.
Kompernaß GmbH
Burgstrasse 21
44867 Bochum
Deutschland / Germany
www.kompernass.com
Subject to technical changes.
KH 526
KH525_IB_UK 06.07.2006 10:16 Uhr Seite 9
Loading...