3 C
TABLE LAMP
KOMPERNASS GMBH • BURGSTRASSE 21 • D-44867 BOCHUM
www.kompernass.com
ID-NR.: KH4183-05/08-V2
GB
KH 4183
TABLE LAMP
Operating manual
BORDLAMPE
Betjeningsvejledning
Index Page
Intended Use 2
Items supplied 2
Technical data 2
Safety instructions 2
The appliance parts 4
Assembling and positioning the lamp 4
Changing the light bulb 4
Maintenance 5
Cleaning and Care 5
Disposal 5
CE Conformity 5
Importer 5
Service 5
Read these operating instructions carefully before using the appliance for the rst
time and preserve this booklet for later reference. Pass this manual on to whoever
might acquire the appliance at a future date.
- 1 -
Intended Use
This appliance is intended for use as
illumination for living areas in domestic
households and only in dry rooms. This
appliance is not intended for use as sole
illumination, for industrial or commercial
applications or for use in occupational
areas.
The warranty does not provide compensation for damage caused by improper
use of the appliance!
Items supplied
1 Pedestal base made of brushed metal
1 Lamp rod
1 Lampshade made of paper
3 Lampshade tensioners
1 Frame with power cable and
On/O switch
1 Bulb
1 Operating manual
Technical data
Mains voltage: 230-240 V
Power cable length: approx. 2 m
Protection class: II /
Bulb type: max. 60 W, E 27
Lamp base: approx. 18 cm Ø
50Hz
~
Safety instructions
Do not permit children to handle elec-•
trical appliances without supervision
- they cannot correctly assess the
potential risks of injury.
Check the device and all parts for
•
visible damages. Should the appliance become damaged immediately
remove the plug from the wall socket.
Then arrange for the appliance to be
checked byCustomer Services.
Risk of electric shock.
Connect the appliance only to electri-•
cal wall sockets with a mains voltage
of 230-240 V ~ /50 Hz.
Do not operate the appliance if the
•
power cable, the On/O switch or
the plug are damaged. Arrange for
defective power cables and plugs to
be repaired or exchanged as soon
as possible by Customer Services.
NEVER open the appliance. There are
•
no user-servicable elements inside.
NEVER submerse the appliance in
•
water. Wipe it only with a slightly
damp cloth.
Protect the appliance against mois-
•
ture. Use it only in dry rooms, do not
use it outdoors or close to liquids.
Ensure that the power cable can never
•
become wet or moist when in use or
that it could be damaged in any way.
Notice regarding power disconnection:
•
To completely disconnect the appliance
from mains power, the plug MUST be
removed from the power socket. For
this reason the appliance should be
placed in a position where unobstructed
access to the power socket is assured
at all times, so that in an emergency
the plug can be quickly removed. To
eliminate the risk of re you should
completely disconnect the plug from
the wall socket if the appliance is not
going to be used for an extended
period, for example, during holidays.
Always take hold of the power cable
•
by the plug. Do not pull on the cable
itself and never touch the power cable
with wet hands, this could result in a
short circuit or an electrical shock. Do
not place the appliance, furniture or anything else on the power cable and ensure that it does not become clamped.
- 2 -
NEVER tie knots in the power cable
and do not bind it with other cables.
Lay the power cable so that no one
can step on or stumble over it.
A damaged power cable can cause
a re or electrical shock. Check the
power cable from time to time. Should
it become damaged contact your
nearest authorized customer service
centre or dealer to have it replaced.
Riskofre!
When a storm and/or thunderstorm •
with the risk of lightning threatens
please disconnect the appliance from
the mains power.
Use only light bulbs of the type detailed
•
in the Technical data. In particular,
do not use higher performance light
bulbs.
Do not leave the appliance unattended
•
at any time when it is in use.
Place the lamp on an even and level
•
surface.
Do not position the appliance below
•
inammable objects, especially not in
the vicinity of curtains and drapes.
Ensure that the lamp maintains an all
•
round minimum distance of 35 cm to
all surrounding objects. With areas on
which the light falls directly, a distance
of 50 cm must be maintained.
Do not place the lamp at locations
•
where, should it inadvertently tip over,
it would land on easily inammable
materials, e.g. soft furnishings, beds,
waste paper baskets etc.
Place the lamp where it cannot be
•
knocked over by falling objects.
Riskofaccidentsandinjuries!
Ensure a safe location for the appli-•
ance.
Do not operate the appliance if it
•
has sustained a fall or is damaged.
Arrange for the appliance to be
checked and/or repaired by qualied
technicians.
Before changing the light bulb, ALWAYS
•
wait for the bulb and the bulb holder
to cool down. Otherwise you run the
risk of being burnt on the hot elements.
This appliance is not intended for use
•
by individuals (including children)
with restricted physical, physiological
or intellectual abilities or deciences
in experience and/or knowledge unless they are supervised by a person
responsible for their safety or receive
from this person instruction in how
the appliance is to be used. Children
should be supervised to ensure that
they do not play with the appliance.
- 3 -