Kompernass KH 4164 User Manual

6

DESK LAMP

KH 4164

KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM

www.kompernass.com

ID-Nr.: KH4164-10/07-V2

DESK LAMP

Operating instructions

KH 4164

r

y

w

q

e

t

u

INDEX PAGE

Intended Use 4
Important safety instructions 4
Technical data 5
Items supplied 5
Appliance description 5
Assembly 5
Utilisation 5
Changing bulbs 6
Cleaning 6
Maintenance 6
Disposal 6
Importer 6
Service 7

Read these operating instructions carefully before using the appliance for the first time and preserve this
manual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.

- 3 -

DESK LAMP KH 4164

Intended Use

This appliance is intended for use as supplementary
illumination for desk-top areas in domestic house­holds and only in dry rooms.
This appliance is not intended for use as sole illumi­nation, for industrial or commercial applications or
for use in occupational areas.

Important safety instructions

To avoid potentially fatal electric
shocks:

• Protect the appliance against moisture. Use it
only in dry rooms, do not use it outdoors or
close to liquids.

• Ensure that the power plug is at all times easily
accessible, so that it can be quickly and easily
removed in the event of potential danger or risk.

• When in use, ensure that the power cable can­not become jammed/trapped or damaged in
any way. Place it such that no one can trip or
stumble over it.

• Should the power cable or the power plug
become damaged, arrange for the damaged
component to be replaced by Customer Service
before continuing to use the appliance.

• Should the appliance become damaged, im­mediately remove the plug from the wall socket.
Then arrange for the appliance to be checked
by Customer Services.

• After use or during extended absences, ALWAYS
remove the plug from the power socket. For as
long as the plug is inserted in the wall socket
the appliance itself is under electrical power.

To avoid the risk of fire:

• Use ONLY the type of bulb detailed in the
Technical Data. In particular, do NOT use
higher-performance bulbs or any without
a protective disc.

• Do not leave the appliance unattended at any
time when it is in use.

• Do not locate the appliance below inflammable
objects, especially not in the vicinity of curtains
and drapes.

• Maintain a minimum distance of 35 cm in all
directions to surrounding objects. Do not direct
the radiance at heat-sensitive objects.

• Do not place the appliance at locations where,
should it inadvertently tip over, it would land on
easily inflammable materials, e.g. soft furnishings,
beds, waste paper baskets etc.

• Place the appliance where it cannot be knocked
over by falling objects.

To avoid the risks of accidents and
personal injuries:

• When changing the bulb ALWAYS use the sup­plied suction disc. Do not attempt to change the
bulb with your bare fingers. If you do, there is
the risk of being injured on the housing edges,
by splittering glass or being burnt on hot ele­ments.

• This appliance is not intended for use by indivi­duals (including children) with restricted physical,
physiological or intellectual abilities or deficien­ces in experience and/or knowledge unless they
are supervised by a person responsible for their
safety or receive from this person instruction in
how the appliance is to be used. Children should
be supervised to ensure that they do not play
with the appliance.

- 4 -

Technical data

Assembly

Mains voltage: 230-240 V ~50Hz
Power cable length: 1.8 m with switch
Power consumption : 50 W
Protection class: II /
Bulb type: max. 50 W / GU 10
Lamp base: 16 cm in diameter

Items supplied

1 Desk lamp, pre-assembled
1 Counterweight
1 Hexagon spanner
1 Suction disc for bulb exchanges
1 Operating manual

• Check to ensure that the appliance is undamaged,
all component parts are present and that pack­aging remnants are removed from it.

Appliance description

Counterweight

q

Power cable

w

Hexagon spanner

e

Suction disc

r

Switch

t

Lever for lamp adjustment

y

Lever for swivel-arm locking

u

For reasons of transportation the lamp is supplied
pre/assembled.First put the components together
completely before operating the lamp:

• Turn the counterweight
swivel-arm.

• Carefully pull the power cable
the lamp base until the swivel arm is flush in the
lamp base.

• Lock the swivel arm into the lamp base with the
hexagon spanner

• Place the suction disc
bulb and press it firmly. Guide the bulb into the
bulb holder and secure it by turning it through
a quarter-turn in a clockwise direction.

onto the rear of the

q

.

e

onto the front of the

r

so far out of

w

Attention!

Do not forget to remove the suction disc! Do
NOT operate the lamp with the suction disc
fitted – it would be melted immediately by the
heat.

Utilisation

• Place the lamp at a suitable location, as detailed
in the Safety Instructions.

• Insert the power cable into the wall socket. You
can now switch the lamp on and off at the
switch

• Always adjust the position of the lamp with the
lever
get very hot when in use.

• You can adjust the swivel-arm in that you first
loosen the locking device
arm to the desired position and then retighten
the locking device.

.

t

, not with the lamp housing. This can

y

. Move the swivel-

u

- 5 -

Changing bulbs

Maintenance

CAUTION!

Check to ensure that the power plug is remo­ved from the wall socket. If the lamp has been
in use, first allow it to cool down completely.
This avoids the potential risk of being burnt.

• Place the suction disc
defective bulb and press it firmly.
Turn the bulb through an anti-clockwise quarter­turn and remove it from the bulb holder.

• Now place the suction disc
of the replacement bulb and press it firmly.
Guide the bulb into the bulb holder and secure
it by turning it through a quarter-turn in a clock­wise direction.

onto the front of the

r

onto the front

r

Attention!

Do not forget to remove the suction disc! Do
NOT operate the lamp with the suction disc
fitted – it would be melted immediately by the
heat.

Cleaning

Attention!

NEVER open any components of the lamp!
Arrange for the appliance to be repaired by
specialists only.

The appliance is maintenance-free. No form of main­tenance, either on or in the appliance, is intended
for execution by the user. In the event of malfunction
or apparent damage, make contact with Customer
Services.

Disposal

Do not dispose of the appliance in your normal
domestic waste. This also applies for used
bulbs.

Dispose of the appliance through an approved dis­posal centre or at your community waste facility.
Observe the currently applicable regulations. In
case of doubt, please contact your waste disposal
centre.

Dispose of all packaging materials in an
environmentally friendly manner.

CAUTION!

Check to ensure that the power plug is removed
from the wall socket. If the lamp has been in
use, first allow it to cool down completely.
This avoids the potential risk of being burnt.

• Clean the appliance only with a dry or lightly
moistened cloth. Do not use abrasive cleaners
or detergents, these could damage the surfaces.

Importer

KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM

www.kompernass.com

- 6 -

Service

DES Ltd

Units 14-15
Bilston Industrial Estate
Oxford Street
Bilston
WV14 7EG
Tel.: [phone]
Fax: [phone]
e-mail: [e-mail]

Kompernass Service Ireland

c/o Irish Connection
41 Harbour view
Howth Co. Dublin
Tel: [phone]
Fax: [phone]
e-mail: [e-mail]

- 7 -

- 8 -