Kompernass KH 4106 User Manual [pl]
4A
KOMPERNASS GMBH · BURGSTRASSE 21
D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH 4106 - 04/09-V1
MINI COMPRESSOR
KH 4106
MINI COMPRESSOR
ating instructions
Oper
MINI KOMPRESOR
Instrukcja obsługi
MINI KOMPRESSZOR
Használati utasítás
CONTENT PAGE
1. Safety instructions 2
2. Utilisation 5
3. Package contents 5
4. Technical data 6
5. Operating elements 6
6. Preparing the Mini Compressor for use 7
7. Using the Mini Compressor 7
8. Storing the Mini Compressor 10
9. Cleaning the Mini Compressor 11
10. Disposal 11
11. Warranty & Service 12
12. Importer 13
Read these operating instructions carefully before using the appliance
for the first time and preserve this maual for later reference. Pass this
manual on to whoever might acquire the appliance at a future date.
1
MINI COMPRESSOR KH 4106
1. Safety instructions
Danger!
Should water or moisture penetrate into the Mini Compressor, …
• there is the danger of receiving an electric shock!
• it could be irreparably damaged!
Thus:
Do not use or store the Mini Compressor …
• in humid environments!
• in close proximity to water! Additionally, never subject the
Mini Compressor to spraywater or rain.
Also, do not place any water-filled receptacles onto the MiniCompressor!
Extreme heat effects can lead to the overheating of the Mini Compressor and to the meltdown of plastic parts. Through this the MiniCompressor could be irreparably damaged, and there is the additional
risk of fire!
2
Thus:
• Do not place the Mini Compressor in close proximity to heat
sources.
• Do not place unprotected open flame sources – e.g. burning
candles – on the Mini Compressor!
• Do not leave the Mini Compressor in a vehicle if there are high
outdoor temperatures. Especially in summer the temperature inside
a vehicle can become extremely high.
• Do not cover the ventilation openings of the Mini Compressor!
Therefore, do not place the Mini Compressor on blankets or other
textiles etc.
• Take note that the Mini Compressor is not suitable for constant
operation. Thus do permit the Mini Compressor to be switched on
without a break for periods in excess of 10 minutes. Allow it to cool
down for at least 30 minutes before switching it back on.
• The Mini Compressor should not be used or stored in dusty environments. Dust could penetrate into the Mini Compressor. Should large
amounts of dust penetrate into the Mini Compressor it could
overheat and be irreparably damaged. There is also a danger of
fire!
Never attempt to repair the power cable yourself in the case of a
defect! There is the danger of an electric shock! Instead, approach
one of our service partners.
3
Always check the maximum permitted air pressure for the object to be
inflated! For this, consult the operating instructions and safety information supplied with the object to be inflated. Additionally, when inflating
objects with the Mini Compressor always take note of the mamometer
on the Mini Compressor. Should the object be inflated beyond the maximum permitted air pressure it could burst. There is then the danger of
serious physical injury! Also, take precautions that the Mini Compressor
cannot be used by children without supervision!
Caution!
The Mini Compressor could be irreparably damaged if it falls or is
dropped! Therefore always place the Mini Compressor on a stable,
level and non-slip surface.
NOTE:
For damages resulting from …
• Opening the housing of the Mini Compressor
• attempted repairs made by non-qualified personnel
• improper utilisation of the Mini Compressor
no liability or warranty will be accepted!
The Mini Compressor becomes warm when it is switched on. This is not
a cause for concern and is not an indication of a technical problem.
4
2. Utilisation
The Mini Compressor is suitable exclusively for…
• the inflation of objects with a valve (e. g. tyres, balls etc.).
• measuring the air pressure of inflated objects.
• for operation on the 12-V circuit of vehicles via the cigar lighter.
• for domestic, non-commercial use.
3. Package contents
• Mini Compressor
• 3 Adapter sets for various valve types
• Operating manual
NOTE:
The connector valve rof the Mini Compressor is suitable for the inflation of tyres with Schrader valves. For this you do not need to use an
additional valve adapter. For the inflation of bicycle tyres with valve
types …
• Sclaverand (also: French valves, Presta valves, inner-tube valves,
racing valves)
• Dunlop (also: Blitz valves, German valves)
you require the valve adapter for Schrader car valves. These are
available from specialist bicycle shops.
5
4. Technical data
Operating voltage : 12 V DC
Current consumption: 6,5 A
Max. operating pressure: 17 bar /250 Psi
Continuous operating time: 10 Minutes
The CO Time (Continuous Operation Time) details how long an
appliance can be operated without the motor overheat-ing and
becoming damaged. After the appliance has run for this period it
must be switched off until the motor has cooled itself down.
5. Operating elements
Mini Compressor
q
Manometer display …
w
• bar resp. kg/cm2 (inner, yellow scale)
• psi (outer, white scale)
Airline
e
Connection valve with fastening lever
r
Power cable
t
Turn switch (Mini Compressor on/off)
y
Cigar lighter plug
u
Adaptor sets for various valve types.
i
6
6. Preparing the Mini Compressor for use
Remove the Mini Compressor and the Adapter sets ifrom the
packaging. Unwind the power cable
The Mini Compressor is now ready for use.
to its full length.
t
7. Using the Mini Compressor
7.1 Using the Mini Compressor to inflate objects
1. Remove the cigar lighter from its holder in the vehicle.
NOTE:
Should the interior of the cigar lighter holder be soiled (e.g. with tobacco shreds or ash): Clean it with a non-con-ducting object before inserting the cigar lighter plug
the operation of the Mini Compressor. Ideal would be a small brush,
cotton buds or something similar. Under no circumstances use anything
metallic! Also, do not insert your fingers into the cigar lighter holder!
. Otherwise it could cause a malfunction in
u
7
Danger!
Should you do so, you may receive an electrical shock!
2. Insert the cigar lighter plug
the vehicle.
3. Check to see if an adaptor is required for use on the object to be
inflated. Should this be the case: Press resp. screw the required
adaptor into the opening of the connection valve
4. Check to ensure that the fastening lever of the connection valve
is open. When open, the fastening lever is in a vertical position.
5. Press the opened connection valve
to be inflated. Press it down so that it is firmly seated. Should you be
using one of the adaptors
adaptor into the valve of the object to be inflated.
6. Close the connection valve r, in that the fastening lever is pressed
down. Continue to firmly hold the connection valve down. Ensure
that the connection valve cannot disconnect itself from the valve of
the object being inflated.
firmly into the cigar lighter holder in
u
.
r
onto the valve of the object
r
: Press the connection valve with the
i
r
8
7. Switch on the vehicle ignition should this be necessary for the cigar
lighter to function. In case of query, consult the operating handbook
for the vehicle.
8. Firmly hold the object to be inflated. If necessary, obtain assistance
from a second person.
9. Twist the turn switch
it audibly engages. The Mini Compressor now starts to run. Check
the continually rising air pressure on the mamometer
Compressor.
10. As soon as the desired air pressure is displayed on the mamome-
ter
: Switch the Mini Compressor off. Twist the turn switch
w
this time in an anti-clockwise direction until it audibly engages.
11. Remove the cigar lighter plug
the vehicle. If necessary, switch off the vehicle ignition.
12. Open the fastening lever of the connection valve rin that it is
pushed into a vertical position. Pull the connection valve (complete
with the adaptor, if one has been used) from the valve of the
inflated object.
in a clockwise direction until
y
from the cigar lighter holder in
u
9
of the Mini
w
y
Turn the connection valve back and forth to make it easier to remove.
When removing the connection valve air can escape from the valve of
the object that has been inflated. Therefore ensure that the connection
valve is removed as quickly as possible.
7.2 Using the Mini Compressor to measure inflation
pressure
NOTE:
For measuring the pressure of an inflated object the Mini Compressor
does not require electricity.
1. Follow steps 3 to 6 in chapter 7.1 „Using the Mini Compressor to
inflate objects“.
2. Read off the inflation pressure on the mamometer
Mini Compressor.
3. To conclude, follow step 12 in chapter 7.1 „Using the
Mini Compressor to inflate objects“.
w
of the
8. Storing the Mini Compressor
Always store the Mini Compressor at a clean and dry location.
To avoid damage, make sure that the air line
are not folded.
t
10
and the power cable
e
9. Cleaning the Mini Compressor
Caution:
Ensure that moisture cannot penetrate into the Mini Compressor!
Danger of Electrocution!
• Clean the housing of the Mini Compressor with a lightly moist cloth.
10. Disposal
Do not dispose of the appliance in your normal domestic
waste. This product is subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved dis-posal centre or at
your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.
Dispose of all packaging materials in an environmentally
responsible manner.
11
Loading...