Page 1
Kompernaß GmbH · Burgstrasse 21 · D-44867 Bochum
www.kompernass.com
ID no.: KH5520-08/06-V1
UK
KH5520_UK 02.11.2006 16:39 Uhr Seite 1
Page 2
Hot Air Curler Set KH 5520
Operating Instructions
KH5520_UK 02.11.2006 16:39 Uhr Seite 2
Page 3
KH5520_UK 02.11.2006 16:39 Uhr Seite 3
Page 4
1
2
3
KH5520_UK 02.11.2006 16:39 Uhr Seite 4
Page 5
- 3 -
Balance KH5520
Hot Air Curler Set KH 5520 Page
Intended use 4
Technical data 4
Package contents 4
Description of the appliance 4
Safety instructions 5
Startup 6
Attaching/detaching accessories 6
Switching on/off / Selecting a heat level 6
Cleaning and care 6
Storage 7
Disposal 7
Warranty & Service 7
A few tips for the perfect hairstyle 8
Read the operating instructions carefully before using the appliance for the first time
and preserve this booklet for later reference. Hand over the manual to anyone you
pass on the appliance to.
KH5520_UK 02.11.2006 16:39 Uhr Seite 3
Page 6
- 4 -
Balance KH5520
Hot Air Curler Set KH 5520
Intended use
This appliance is intended for hair
styling and for use in household
applications only. It is not intended
for use on animals or in commercial
or industrial environments.
Technical data
Voltage: 230-240 V~, 50 Hz
Power consumption: 1000 W
Protection class: II
Package contents
Hot Air Curler Set KH5520
Operating Instructions
Warranty card
Description of the appliance
The set consists of the appliance,
6 attachable accessories and a
nylon bag (see fig. 1):
Ondulating jet – for blow-drying.
Finger diffuser – for more volume,
dry the hairline first, then the ends.
Diffuser - volume attachment– for
simultaneous brushing and drying
of your hair.
Nylon bag – for storing the hot air
curler set
32 mm hot air round metal brush –
for large curls
25 mm hot air round plastic brush –
for small curls: Roll individual strands
round the brush and dry them. After
switching off leave your hair curled
round the brush for a few seconds.
Curl clamp – for small spiral curls
(angel curls). Roll individual strands
round the clamp and fix them with
the curl clip.
To safely set aside the hot air curler
during operation, use the clip on
the side of the curl clamp (see fig. 3)
Hot air curler (motor unit)
see fig. 2
Attachment connector
Eject button
Cool-Shot button
Heat level switch
Air suction grid
KH5520_UK 02.11.2006 16:39 Uhr Seite 4
Page 7
- 5 -
Balance KH5520
Safety instructions
Important information for your
safety!
To avoid a life-threatening electric
shock:
• Never touch the appliance or the
power plug with wet or moist hands,
as long as the power plug is in the
wall socket!
• Never use the appliance near water,
particularly not near sinks, baths or
other vessels .
• Make sure that the power cord never
becomes wet or damp during operation. Lay the cord such that it cannot
be pinched or otherwise damaged. If
the power cord or the power plug are
damaged, you must not continue to
use the appliance before having had
it repaired by customer service.
• Alway pull the plug out of the wall
socket after use, particularly if you
use the appliance in the bathroom.
It is not sufficient to simply switch
off the appliance – line voltage is still
present in the appliacne as long as
the power plug is connected to the
wall socket.
• Make sure that no objects can ever
reach the inside of the appliance,
particularly not metal hair clips, grips
or hairpins.
Tip: An RCD on the bathroom circuit
provides additional protection. For
more information, please consult an
electrcian.
To prevent the risk of fire or injury:
• The appliance components can
become quite hot during operation.
Therefore only touch the handle
and the buttons.
• Always only use the appliance with
attachments, never on its own, as
the connector for the accessories
becomes hot during operation.
• Allow the appliance to cool down
before attaching or detaching
accessories.
• Only use the enclosed original accessories, as they have been optimized to
work with this appliance. Other parts
are possibly not adequately safe.
• Keep the openings for air inlet and
outlet vacant for unimpaired air flow.
Otherwise the appliance may overheat.
• Be careful with hair spray, water
atomizers etc. On the one hand the
air flow may blow these substances
directly into your eyes. On the other
hand these substances must not
enter the appliance – as they may
be inflammable, aggressive or conductive.
• Do not allow infirm persons or
children handle heatgenerating
household appliances without
supervision – they may possibly
not be able to correctly assess the
potential danger.
KH5520_UK 02.11.2006 16:39 Uhr Seite 5
Page 8
- 6 -
Balance KH5520
Startup
Before starting up the appliance,
make certain that ...
– the appliance and the accessories
are in perfect working order,
– all packaging material has been
removed.
If necessary, clean the accessories as
described under “Cleaning and care”.
Attaching/detaching accessories
Caution:
After operation, the appliance
components may be hot!
To attach an accessory ...
• push it onto the accessory connector
and turn it in anti-clockwise direction until you hear it click into place.
The arrow symbols on the attachment and on the accessory connector
must correspond.
To detach an accessory ...
• switch off the appliance first and
allow it to cool down
• Press the eject button and turn
the accessory in clockwise direction.
The accessory can now be easily
removed from the connector .
Switching on/off / Selecting a heat
level
After having attached the desired
accessory and plugged the power
plug into the power socket ...
you can switch on the appliance using
the switch and select the level:
"1" for low fan speed
"2" for medium fan speed
"3" for high fan speed
With the Cool-Shot button you
can generate a cold air flow at any
fan speed. Press the Cool-Shot button
, until it engages.
You can switch off the appliance
by pushing the level switch to ...
"0" (= appliance off).
Cleaning and care
Never open the casing of the app-
liance. No operating elements are
located inside the device. An open
housing can create the risk of a
life-threatening electrical shock.
Before cleaning the device, ....
• always disconnect the power
plug from the power socket
• and allow the appliance to cool
down completely.
KH5520_UK 02.11.2006 16:39 Uhr Seite 6
Page 9
- 7 -
You must under no cirumstances
immerse the appliance components
in water or other liquids! Danger
to life by an electric shock will be
caused, if residual liquids contact
live parts the next time the appliance is used.
• Clean the appliance components with
a dry or slightly damp cloth – and
carefully dry all parts afterwards.
Clean the air suction grid with a soft
brush at regular intervals. Otherwise
there is a fire hazard!
• Remove the air suction grid from
the casing and clean it inside and
outside with a soft brush.
• Push the air suction grid back onto
the casing. Hereby press the lateral
fins on the ventilation grid down
lightly.
• Do not use any cleansers or solvents.
These can damage the plastic surfaces.
Storage
Allow the appliance to cool down completely before putting it into the nylon
bag. Only keep it in the bag to protect
it from dust. Store the appliance in a dry
location.
Disposal
Do not throw the appliance in
your normal domestic waste.
Dispose of the appliance via a professional
disposal service. Observe the currently applicable regulations. In case of doubt, contact an approved waste disposal service.
Warranty & Service
The warranty conditions and the service
address can be found on the warranty
slip.
Kompernaß GmbH
Burgstrasse 21
D-44867 Bochum
www.kompernass.com
Balance KH5520
KH5520_UK 02.11.2006 16:39 Uhr Seite 7
Page 10
- 8 -
A few tips for the perfect hairstyle
Only style your hair when it is already
almost dry.
Divide your hair into individual strands
for more volume.
You will achieve additonal volume by
starting to dry your hair at the hairline
and working down towards the ends.
After switching off the appliance, wait
for a few seconds before releasing the
curl.
Let your hair cool down well before
combing.
Balance KH 5520
Diffusor - volume attachment Curl clamp
Curl clamp
KH5520_UK 02.11.2006 16:40 Uhr Seite 8
Loading...