- 6 -
NOTE:
Liability and warranty will not be accepted for damage caused by improper use
of the scales!
3. Technical Data
• Power supply: 2x 3V CR 2032
• Max. load / Max. measurable weight:
160 kg / 352 lb
• Min. measurable weight: 3 kg / 6,6 lb
• Measuring procedure: Bioelectric impedance analysis over four feet sensors
• Intervals in weight measurement:
0,1 kg / 0,2 lb
• Measurement of bodyfat share: 5–55 %
• Interval of bodyfat measurements: 0,1%
• Measurement of body-water share:
25–77 %
• Interval of body-water measurements:
0,1%
• Measurement of muscle mass share:
20–70 %
• Interval of muscle mass share: 0,1%
• Calorie requirement display: in kcal
• Interval of calorie requirement display:
1 kcal
• Input possibilities for body size:
100–220 cm / 3´03´´–7´03´´ inch
• Input possibilities for age: 10–99 years
• 12 storage positions for personal data
• Functions: Pure weight measurement /
Weight, bodyfat, muscle mass and bodywater measurements / Measurement of
approximate daily calorie requirement
• Programmable measurement units:
kg/lb, cm/inch
• Battery status display
• Overburdening display
• Error display
• Automatic scales switch/off:
after ca. 7 seconds
• Operating temperature: 10°C–40°C
4. Package contents
• Bodyfat, Muscle Mass and Body-Water
Analysis Scales
• 2 Button batteries Type CR 2032
• Operating Instructions
• Guarantee Card
5. Components and operating
elements
Display
Forward button
Sensors
Battery compartment
Measurement unit button (kg/lb)
Backwards button
On/Info button
6. Taking the scales into use
6.1. Unpacking the scales
1 Carefully remove the scales from the
packaging. Do not drop the scales!
This could damage them irreparably.
6.2. Power Supply
2 Carefully lay the scales upside-down.
Use a towel or similar underneath to
avoid scratching the scales. The base
of the scales with the battery compartment is now uppermost.
3 Open the battery compartment and
remove the protective strip protruding from under the batteries.
4 Turn the scales over, so that the top
is again uppermost.
KH 5516