- 6 -
KH 2113
Blower levels
0 The Professional Hair Dryer is
switched off
1 reduced air flow
2 full power air flow
Heat levels
1 Cold air flow
2 Low heating level
3 High heating level
With the cool level switch “Cool-Shot”
햸 you can produce a cooler air flow
with every combination of blower and
heat levels.
➪ Switch the appliance off after use, in
that you place the blower switch 햶
into position “0”. Then remove the
plug from the wall socket.
Drying and styling hair
➪ To quickly dry hair, we recommend
first of all using a high blower and
heater setting for a short period.
Afterwards, place the settings at a
lower level to shape and form the
hair.
With the enclosed styling jet 햲, which
can be turned into all positions, you can
use the air flow directly for styling.
If you wish wish to dry your hair particulary gently, or for the so-called “airdryed permanent wave”, use the finger
diffusor 햹.
➪ For this, first of all remove the styling
jet 햲, then replace it with the finger
diffusor.
➪ Before you comb your hair out allow
it to cool, so that the styling retains
its form.
➪ For cooling the hair you can use the
switch “Cool-Shot” 햸 or level 1 of
the blower switch 햷 settings.
Attention!
First pack and transport the
Professional Hair Dryer when it has
completely cooled down. Otherwise,
it could damage other items.
Cleaning
Danger of electrical shock
Before cleaning the Professional Hair
Dryer, always remove the plug from
the mains wall socket.
Cleaning the housing
➪ To clean the housing, use a soft cloth
moistened with a mild soapy solution.
Cleaning the air suction grill and the
filter element
Fire hazard!
Clean the air suction grill 햴 and the
filter element 햳 at regular intervals
with a soft brush.
➪ Fold out the air suction grill 햴 to the
rear.