komatsu D85EX_15R, D85PX-15R SPECIFICATIONS
Photo may include optional equipment.
www.Komatsu.com Printed in Japan 200706 IP.AD (10)
CEN00192-00
Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
HORSEPOWER
Gross: 199 kW
266 HP @ 1900 rpm
Net: 197 kW 264 HP @ 1900 rpm
OPERATING WEIGHT
D85EX-15R: 28000 kg
61,730 lb
D85PX-15R: 27550 kg 60,740 lb
CRAWLER DOZER
STANDARD EQUIPMENT
● Alternator 50 ampere/24V
● Back up alarm
● Batteries 140 Ah/2 x 12V
● Decelerator pedal
● Dry-type air cleaner with dust evacuator
and dust indicator
● Electric priming pump
● Engine hood
● Final drive case wear guard
● Front pull hook
● Hinged front mask, perforated
● Hydraulic drive radiator cooling fan
● Hydraulic track adjusters
● Hydrostatic steering system (HSS)
● Lighting system (including two front
and rear lights)
● Muffler with rain cap
● Palm lever steering control
● Perforated side covers
● Radiator reserve tank
● Rear cover
● Segmented sprockets
● Shoes:
560 mm 22" single-grouser (EX)
910mm 36” single-grouser (PX)
● Starting motor 7.5 kW/24 V
● Suspension seat and reclining
● TORQFLOW transmission
● Tr ack frames
● Track roller guards, full length (EX),
center and end section (PX)
● Warning horn
● Water separator
ROPS canopy (without cab):*
Weight. . . . . . . . . . . . . . . . . . 437 kg 970 lb
Roof dimensions
Length . . . . . . . . . . . . . . . 1368 mm 4’6”
Width . . . . . . . . . . . . . . . . 1850 mm 6’1”
Height from
compartment floor . . . . . . 1768 mm 5’10”
*Meets ISO 3471 and SAE J/ISO 3471 ROPS
standards, as well as ISO 3449 FOPS standard.
ROPS for cab:*
Weight. . . . . . . . . . . . . . . . . . 371 kg 820 lb
Roof dimensions
Length . . . . . . . . . . . . . . . . 650 mm 2’2”
Width . . . . . . . . . . . . . . . 1774 mm 5’10”
Height from
compartment floor . . . . . . . 1754 mm 5’9”
*Meets ISO 3471 and SAE J/ISO 3471 ROPS
standards.
Multi-shank ripper (EX):
Hydraulically controlled parallelogram ripper
with three shanks.
Weight (including hydraulic
control unit) . . . . . . . . . 2500 kg 5,520 lb
Beam length . . . . . . . . . . . . . 2246 mm 7’4”
Maximum lift above ground . . 564 mm 1’10”
Maximum digging depth . . . . . 653 mm 2’2”
Steel cab:*
Weight. . . . . . . . . . . . . . . . . . 410 kg 910 lb
Dimensions:
Length . . . . . . . . . . . . . . . 1758 mm 5’9”
Width . . . . . . . . . . . . . . . . 1323 mm 4’4”
Height from compartment
floor to ceiling . . . . . . . . . . 1592 mm 5’3”
*Meets ISO 3449 FOPS standard.
OPTIONAL EQUIPMENT
● Air conditioner
● Alternator 75 ampere/24 V
● AM-FM radio with cassette
● Batteries 200 Ah/2 x 12V
● Fire extinguisher
● First-aid kit
● Heater and defroster
● Light for ripper point
● Lunch box
● Mirror, rearview
● Panel cover
● Seat belt
● Shoes:
610 mm 24” Single grouser shoe (EX)
660 mm 26” Single grouser shoes (EX)
910 mm 36” Swamp shoes (PX)
● Starting motor 11 kW/24V
● Sun visor
● Suspension seat, turn, fabric material
● Thermos
● Tool kit
● Vandalism protection kit
D85EX-15R
D85PX-15R
2 3
W
ALK
-A
ROUND
Simple hull frame
and monocoque track frame
with pivot shaft for greater
reliability. See page 8.
D85-15
Extra-low machine profile provides excellent
machine balance and low center of gravity.
SAA6D125E-5 turbocharged after-cooled
diesel engine provides an output of 197 kW 264 HP
with excellent productivity. See page 6.
Large blade capacities:
D85EX:
5.2 m36.8 yd3(Straight tilt dozer)
7.0 m39.2 yd3(Semi-U tilt dozer)
D85PX:
5.9 m37.7 yd3(Straight tilt dozer)
See page 6.
Preventative maintenance
● Centralized service station
● Enclosed hydraulic piping
● Modular power train design
● Electric priming pump
See page 8.
Photo may include optional equipment.
Low-drive, long-track, undercarriage
ensures outstanding grading ability and stability.
See page 6.
Filtration
Further enhanced reliability of the machine against fuel
contamination thanks to the improvement in fuel filtration.
See page 9.
CRAWLER DOZER
D85EX/PX-15R C RAWLER D OZER
Genuine Answers for Land and Environment Optimization
New hexagonal designed cab includes:
● Spacious interior
● Comfortable ride with new cab damper
● Excellent visibility
● High capacity air conditioning system (optional)
● Palm Command Control System (PCCS) lever
● Pressurized cab (optional)
● Adjustable armrests
Hydrostatic Steering System (HSS)
provides smooth, quick and powerful control in
various ground conditions.
See page 5.
The track link life is greatly improved through
increased bushing diameter and link height in addition to
lubricated track. See page 8.
HORSEPOWER
Gross: 199 kW 266 HP @ 1900 rpm
Net: 197 kW 264 HP @ 1900 rpm
OPERATING WEIGHT
D85EX-15R 28000 kg 61,730 lb
D85PX-15R 27550 kg 60,740 lb
BLADE CAPACITY
Semi-U Tilt Dozer:
D85EX-15R: 7.0 m39.2 yd
3
Straight Tilt Dozer:
D85EX-15R: 5.2 m36.8 yd
3
D85PX-15R: 5.9 m37.7 yd
3
Komatsu-integrated design for the best value,
reliability, and versatility. Hydraulics, power train, frame,
and all other major components are engineered by
Komatsu. You get a machine whose components are
designed to work together for higher production, greater
reliability, and more versatility.
Hydraulic drive radiator cooling fan
controlled automatically, reduces fuel
consumption and operating noise levels.
See page 6.
Building on the technology and expertise Komatsu has
accumulated since establishment in 1921, GALEO presents
customers worldwide with strong, distinctive image of
technological innovation and exceptional value.
The GALEO brand will be employed for Komatsu’s full lineup
of advanced construction and mining equipment. Designed
with high productivity, safety and environmental
considerations in mind, the machines in this line reflect
Komatsu’s commitment to contributing to the creation of a
better world.
Loading...