1. MCM2082201-01
Super-High Sensitivity HD Video Camera
with Separated Camera Head
KC-1000
User’s Guide
Tentative
Komaura Corporation
2. MCM2082201-01
Table of Contents
Preface .................................................................................................................. 4
Features ................................................................................................................ 4
Camera .................................................................................................................. 5
1. Safety Notice ..................................................................................................... 5
2. Precautions ....................................................................................................... 5
Maintenance and operating environment ......................................................... 5
Disclaimer ................................................................................................... 6
Transportation ............................................................................................. 6
Care of the unit ........................................................................................... 6
Phenomena specific to CMOS image sensors .................................................... 6
3. Name and Function of Parts ................................................................................ 7
3.1 CCU Front Panel ..................................................................................... 7
● Front Panel ........................................................................................... 7
● Feature Locations................................................................................... 7
● LED’s ................................................................................................... 9
3.2 CCU Rear Panel ..................................................................................... 10
3.3 Camera Head ........................................................................................ 12
4. Installation....................................................................................................... 13
Installing the unit ........................................................................................ 13
Attach a lens .............................................................................................. 13
Connection between camera head ................................................................. 13
Connection Cable for camera head................................................................. 13
Power supply connection .............................................................................. 13
Connection with PC（LAN） .......................................................................... 14
Connection with PC（RS-232C）.................................................................... 14
Connection with monitor .............................................................................. 14
3. MCM2082201-01
On-Screen Menu ................................................................................................... 15
1. Menu structure ................................................................................................. 15
Menu tree and initial parameter .................................................................... 16
2. On-screen Menu Operation ................................................................................. 18
3. On-Screen Menu Description............................................................................... 19
3.1 Scene Files ........................................................................................... 19
3.2 ALC ..................................................................................................... 22
ALC Mask area settings .............................................................................. 26
ALC Mode settings……………………………………………………………………………… 28
3.3 Picture ................................................................................................. 31
3.4 Color ................................................................................................... 32
3.5 Settings ............................................................................................... 35
3.6 Information .......................................................................................... 39
4041
On-Screen Display ................................................................................................ 42
1. On-Screen Display ............................................................................................ 42
1.1 Message ............................................................................................. 42
2. On-Screen Display (JPEG images) ...................................................................... 45
Specifications ....................................................................................................... 46
4. MCM2082201-01
Preface
Please read this manual before using and save this manual for future reference.
The model and serial numbers are located on the bottom and record these numbers.
Features
SSC-9000 is a HD video camera, consisting of a compact HD camera head (C-mount) and a CCU
that enables various real-time video processing.
The newly developed super-high sensitivity CMOS image sensor is equipped.
Moreover, by three-dimensional noise reduction processing of simultaneous development, color
picture is possible also under the low illumination of 0.005lx.
The camera head and CCU can be connected with a twisted-pair cable, up to a length of
approximately 80 m. This enables flexible and inexpensive use even in locations in which
installation was difficult in the past, or that required large-scale construction.
※ Maximum connection distance when using 3 repeaters (option): 80 m. Maximum single cable length: 20 m.
●Separated camera head supports twisted-pair cable connection and is extendable with a repeater
●High-performance, compact HD camera head.
●CCU with useful unique functions and easy operability
Direct camera operations are conducted via operation buttons on the front panel.
JPEG still images can be saved if a USB memory is put into the front panel.
Full lineup of video output such as HDMI, HD-SDI, Composite.
External sync input
Fine adjustment of image quality
Support for a wide range of external control
5. MCM2082201-01
Camera
1. Safety Notice
△
! WARNING
!
Mount the unit on the firm place.
!
Tighten the unit and camera with screws firmly.
If the screws are loosened, the unit may fall resulting in injury.
!
Use at correct power supply and voltage.
The rated input voltage of this unit is DC12 V. Supplying a power beyond the rated
value may cause damage on the unit, and it emits smoke or causes fire in the worst
case. Use only specified ADVAS AC adaptor supplied with this unit.
!
This unit is able to divert lightning conduction to itself and the connecting cables at a
certain level, but this is not 100 % guaranteed. For installation locations subject to
lightning strikes, make sure to apply lightning induction to the connecting cables.
△
! CAUTION
Avoid touching the unit's sharp metal edge to prevent injury.
2. Precautions
Maintenance and operating environment
● The unit is intended for indoor use only. Do not use the unit outdoor.
● Avoid operating or storing the product in the following locations, as these can be a cause of
a malfunctions or failure.
● Extremely hot or cold places (Operating temperature: 0 °C to +45 °C [32 °F to 113 °F])
● Extremely humid places (Operating humidity: 35%RH to 90%RH, without condensation)
● Close to sources of strong magnetic fields, such as transmitters or motors
● Close to sources of powerful radio waves, such as transceivers or cellular phones.
● Locations near the high-voltage wires or railroad.
● Extremely dusty or sandy locations
● Locations subject to strong vibration or shock, such as inside vehicles or ships
● Locations exposed to rain or condensation, such as window side.
● Locations subject to steam or oil, such as kitchens.
● Special environment, such as in combustible atmosphere
● Locations emit radiation, X-rays, salt attack or corrosive gases
● Locations where medicine water is used, such as swimming pools and hot springs.
● To prevent heat buildup, do not block air circulation around the unit. The unit discharges heat from the surface
(side) of the main unit. Do not install it close to walls.
6. MCM2082201-01
Disclaimer
● We will not be responsible for any inconveniences or disturbances caused in the event of
privacy invasion as a result of camera footages of this product.
● Before starting an important recording, make sure to take a test recording in order to
confirm a normal recording possible.
● We do not accept liability for the damage of recording or storing image and/or the missing
opportunity of recording in the case caused by a problem of the unit.
Transportation
● Always turn off the power when transporting.
● Handle the unit with care and avoid heavy shock or vibration.
Care of the unit
Remove dust or dirt on the surface of the lens with a blower (commercially available). Do
not use a spray type blower to clean the lens. Liquid will seep into a lens and eventually
cause internal fog.
Phenomena specific to CMOS image sensors
● The following phenomena that may appear in images are specific to CMOS (complementary
metal-oxide semiconductor) image sensors. They do not indicate malfunctions.
White flecks
Although the CMOS image sensors are produced with high-precision technologies, fine white flecks may
be generated on the screen in rare cases, caused by cosmic rays, etc. This is related to the principle of
CMOS image sensors and is not a malfunction. The white flecks especially tend to be seen in the
following cases:
- When operating at a high environmental temperature
- When you have raised the master gain (sensitivity)
Aliasing
When fine patterns, stripes, or lines are shot, they may appear jagged or flicker.
7. MCM2082201-01
PLAY
MENUPHOTO FREEZE
3. Name and Function of Parts
3.1 CCU Front Panel
Basic operations are conducted via operation buttons on the front panel of the CCU.
It equips with a USB device and can save JPEG still images.
Front Panel
● Feature Locations
①Power switch
Turns on/off the power supply.
②Infrared sensor
Receiving infrared rays from the remote controller.
Please make sure not to cover the IR sensor. IR remote
control is optionally available.
③Photo
Save current photos to JPEG images.
Confirm the LED of USB connector is turned on before you
save the images to the USB device.
※You can change the preview time when you execute
freeze of JPEG photo. See [Show Capture Time].
④Freeze
Push the switch to freeze the video. Push again to return
to monitoring the video.
⑤MENU
Push the switch to bring up the menu on screen.
※You can change the showing time of the on-screen menu
when you push the switch. See [Show Menu Time] .
⑥Rotary switch
The rotary switch moves up and down the cursor through
the menus. Push the switch to select the menu. Variables
①
③
④
⑤
⑥
⑦
⑧
⑨
⑩
②
8. MCM2082201-01
can be changed rotating the switch.
You can define some functions to the rotary switch.
※See [On-screen Menu Operation] and [Define Direct
Function].
⑦USB port
Plug the USB device.
⑧Playback JPEG files
Push the switch to playback the JPEG images from the USB
device. The system can playback the JPEG files which
were created by this system. Push again to return to
monitoring the video.
※Please don’t unplug the USB device while the system is
accessing the USB device.
※IPEG files cannot be displayed if the the camera head is
not connected.
⑨ZOOM
Push the switch to change the display mode between
normal and zoom
⑩White Balance
Push the switch to calculate and adjust the white balance
according to the current conditions. Push again to
re-adjust. After adjustment, “AWC Done” message
appears on screen.
It is effective only while setting [WB Mode] to AWC.
※While the Menu is displayed, only [MENU] and [Rotary switch] can be operated.
The other switches don’t respond.
9. MCM2082201-01
● LED’s
Status
①Lock
Front panel switches are locked and cannot be
operated.
②Sensor
Camera head is connected.
③HDMI
HDMI is connected.
④USB slot
USB device is accessed.
※Don’t unplug the USB device under these
conditions.
Till the LED turns on after you plug the USB
device.
During the LED is blinking.
Till the JPEG file loading complete after you
select the file on the JPEG list.
①
②
③
④
10. MCM2082201-01
3.2 CCU Rear Panel
● Rear Panel
①HDMI
HDMI output terminal
②HD-SDI OUT
HD-SDI（HD）output terminal
③VIDEO OUT
Composite video（SD）output terminal
④GENLOCK
Gen Lock input terminal.
Input Black Burst, Bi-Level Sync signal.
⑤TERM. ON
75Ω terminator switch.
Left: Turn the terminator on when the Genlock signal
connect to the other device on the loop.
Right: When this device is the last on the loop.
⑥CAMERA
Camera connection port.
• The camera connection port of the CCU is the same shape
as LAN port. Make sure not to connect the PC to the camera
connection port.
⑦Ext. (IR-receiver)
Receiving infrared rays from the remote controller (optional).
⑧RS-232C
RS-232C connection terminal.
⑨LAN
LAN connection terminal (RJ-45, 100BASE-TX/10BASE-T)
supporting 100Base-TX/10Base-T Auto-Negotiation. Use
the Cat5 (or above) Ethernet cable.
①
②
③
④
⑤
⑥
⑦
⑩
⑧
⑨
⑪
＜ RS-232C pin assignment ＞
11. MCM2082201-01
⑩MODE
Mode switch for toggling camera settings.
When the switch is changed, restart the CCU (turn off/on the
power) to enable the settings.（Initial: All OFF)
4 3 2
1
No.
ON/OFF
Instruction
1
ON
Use OFF only
OFF
2
ON
Use OFF only
OFF
3
ON
Foot-SW Mode
It sets up when connecting the contact
switch an option.(It becomes impossible
to use RS-232C communication.)
OFF
Normal operation
4
ON
Rear Panel ⑦Ext. (IR-receiver) ：valid
Front panel ②Infrared sensor ：invalid
OFF
Front panel ②Infrared sensor ：valid
Rear Panel ⑦Ext. (IR-receiver) ：invalid
⑪DC IN
DC 12V in for connecting the AC adapter bundled with this
unit.
• Be sure to use only specified AC adaptor supplied with this
unit.
• After installing, keep plugs from falling out of the sockets.
ON
OFF
12. MCM2082201-01
3.3 Camera Head
●Front ●Rear ●Bottom
①Lens mount
C-mount lens can be attached . Please use the lens that its
projection from the lens mount surface is less than 6.5 mm
(0.262 inch).
②CCU connecting port
Connect to CCU.
The camera cable can be attached firmly with fixing screws.
③1/4inch hole
Connect to tripod adapter.
①
③
②
13. MCM2082201-01
4. Installation
Installing the unit
Mount the unit on the firm place.
Make sure the unit is off the power before installation.
Attach a lens
C-mount lens can be attached . Please use the lens that its projection from the lens mount
surface is less than 6.5 mm (0.262 inch).
Connection between camera head
Connect the camera head to the camera port on the back panel of CCU.
【Notice】
• The camera connection port of the CCU is the same shape as LAN port. Make sure not to
connect the PC to the camera connection port.
• Before you install the camera cable, please turn off the power of CCU and other connecting
devices.
• Be careful not to bend pins when installing the connector.
• The cable must connect firmly. Incomplete connection could cause noises. Be sure to hold
the connector to unplug.
•Please use in a pair CCU and the camera head which were always enclosed.
Sufficient performance cannot be demonstrated if you use it in a different pair.
Connection Cable for camera head
Twisted pair cable of CAT5e/CAT6/CAT7 (STP-specification LAN cable) can be used for the
connection between camera head and CCU. But not all commercial cables are guaranteed. To
use guaranteed genuine cables or verified cables from the third parties are recommended.
Please note that the unshielded twisted-pair cable (UTP LAN cable) is not acceptable.
Power supply connection
Connect the AC adapter to the DC-IN on the back panel of CCU. Be sure to use only specified
AC adaptor supplied with this unit. After installing, keep plugs from falling out of the sockets.
14. MCM2082201-01
RxD TxD D.GND
＜RS-232Cピ ン 配列＞
1
2 3
4
5
6
7
8
9
Connection with PC（LAN）
●Camera control and still image acquisition can be conducted by a remote PC with LAN, serial
or relay. Please ask us when you need external control.
●For LAN connection, connect between the CCU and PC with Cat5 (or above) Ethernet cable.
If you connect the CCU and the PC directly, use cross cable. If you use network hub between
them, use straight cable. If your PC supports Auto-MDIX, you can use straight cable
between CCU and PC.
The CCU’s default IP address setting is 192.168.1.100. Set
the IP address with the same network address for the PC.（for
Example; 192.168.1.101）
Set the IP address of the PC at the property of TCP/IP. Open
TCP/IP properties by following procedures in manuals of your
PC or OS. The screen shot shows example.
IP address = 192.168.1.80
Subnet address = 255:255:255:0 .
【Note】The IP address of the CCU can be changed by RS-232c
external control. Changing the IP address requires a reboot of the CCU.
Connection with PC（RS-232C）
●Connect between the CCU and PC with RS-232C cross cable.
Connection with monitor
●Connect the monitor to the video output terminal on the back panel of CCU.
●The system output video signals simultaneously from all the terminals. (HDMI, HD-SDI,
composite)
※HDMI and HD-SDI video format can be changed at [HD Format] of an On-Screen Menu. Initial
setting is 720/59.94ｐ.
※Composite video format follows a setup of [HD Format]
HD Format
Composite video format
1080/59.94i, 1080/59.94p, 720/59.94p
NTSC
1080/50i, 1080/50p, 720/50p
PAL
＜ RS-232C pin assignment ＞
15. MCM2082201-01
On-Screen Menu
The on-screen menu allows user to tune the various settings of the system.
1. Menu structure
Push [MENU] to activate the on-screen menu. The top menu below is shown at the
right down corner of the monitor.
Push [MENU] again and the on-screen menu will close.
Top menu
ALC
Picture
Color
Settings
Scene Files
Information
Back
※ After 10 sec idle time, the menu will automatically close. You can change on-screen menu
timeout. See [Show Menu Time].
16. MCM2082201-01
Menu tree and initial parameter
MENU
＜
initial
＞
ALC
ALC <ON>
Mode <Full Auto＞
Level <0%>
Limits
Mask Area <No Mask>
Gain <0.0dB>
Shutter Speed <1/30>
Shutter Limit(H) <1/10000>
Shutter Limit(L) <1/30>
Gain Limit(H) <66.0dB>
Gain Limit(L) <0.0dB>
Picture
WDR <OFF>
Black Level <0%>
Auto Knee <OFF>
Gamma <0.45>
White Clip <109%>
DNR <HIGH>
Enhancer Gain <128>
Color
WB Mode <ATW>
WB Shift Red <0>
WB Shift Blue <0>
ATW Speed <128>
Red Gain <512>
Blue Gain <512>
Chrominance Gain <182>
Matrix
Red Hue <0>
Red Saturation <0>
Green Hue <0>
Green Saturation <0>
Blue Hue <0>
Blue Saturation <0>
Yellow Hue <0>
Yellow Saturation <0>
Cyan Hue <0>
Cyan Saturation <0>
Magenta Hue <0>
Magenta Saturation <0>
Settings
HD Format <720/59.94p>
3G-SDI Level A_B <Level A>
Flip/Mirror <Normal >
Ext Sync H-Phase Adjust<0>
Video Output Pattern <Live>
Network
Setting to Factory
IP Address<192.168.1.100>
Subnet Mask<255.255.255.0>
Default Gateway<192.168.1.254>
Define Direct Function
Menu Setup
Show Capture Time <1 sec>
Time & Date <YMD>
Image on Screen
JPEG
IR Remote Control<ON>
Full HD Display Mode<Dot by Dot>
Rotation <ALC Level>
Push <Menu>
Language <English>
Show Menu Time <10sec>
Menu Display<HD & Video>
Password Lock <OFF>
Time & Date <OFF>
Message <ON>
Scene File No. <ON>
Quality <Mid>
File List Sorting <Sort ▲>
17. MCM2082201-01
Scene Files
Select Scene File
Save Scene File
Show Detail Settings
Information
Model Name
Serial Number
FIRM Version
FPGA Version
Current Scene File
HD Format
Date & Time
IP Address
MAC Address
Connected Camera Head
Paired Camera Head
18. MCM2082201-01
2. On-screen Menu Operation
When the on-screen menu is activated, the rotary switch moves up or down through the menus.
Push the rotary switch and select the menu you want to change.
If you want to quit the current menu,
move the cursor to [Back] at the bottom and push the rotary switch. Or you can push the
[MENU] button and the menu will close.
To change the menu parameters, move the cursor to the target menu and push the rotary
switch. And then rotate the switch to change the parameter. Push the switch and set the
parameter.
※While on-screen menu is activated, you can operate the rotary switch and [MENU] switch only.
The other switches cannot be operated.
※While on-screen menu is not activated, frequently used functions can be assigned to the
rotary switch for direct operation. See Define Direct Function.
ALC
Picture
Color
Settings
Scene Files
Information
Back
Select Scene File
Scene file 2
Save Scene File
Scene file 1
Show Detail Settings
Scene
Back
Parameter
＋(Right)
Parameter
－(Left)
Cursor
down
Cursor
up
19. MCM2082201-01
3. On-Screen Menu Description
3.1 Scene Files
By using scene files, any particular shooting conditions can be restored instantly.
Select Scene File
Scene file 1
Save Scene File
Scene file 1
Show Detail Settings
Scene file 1
Back
Select Scene File
Read scene file from the memory (1 to 5).
Initial settings of those 5 scene files are the same.
Save Scene File
Save scene file to the memory (1 to 5).
When you change the parameters of the current scene file,
they are memorized as scene file x+ temporally. If you
need the parameters later, save the parameters of scene
file x+ before you read any other scene files.
Show Detail Settings
Show detailed parameters of the scene file.
【example】
ALC :ON Level:0%
Mode: Full Auto
MaskArea:No Mask
Shutter Limit(H):1/10000
Shutter Limit(L):1/30
Gain Limit(H): 66.0dB
Gain Limit(L): 0.0dB
NEXT
20. MCM2082201-01
Items saved in the scene files
Below items can be saved in the scene files.
Main Menu
Sub Menu
Initial
ALC
ALC
ON
Mode
Full Auto
Level
0％
Limits
Shutter Limit(H)
1/10000
Shutter Limit(L)
1/30
Gain Limit(H)
66.0dB
Gain Limit(L)
0.0dB
Mask Area
No Mask
Gain
0.0dB
Shutter Speed
1/30
Picture
WDR
OFF
Black Level
0%
Auto Knee
OFF
Gamma
0.45
White Clip
109.0%
DNR
HIGH
Enhancer Gain
128
Color
WB Mode
ATW
WB Shift Red
0
WB Shift Blue
0
ATW Speed
128
Red Gain
512
Blue Gain
512
Chrominance Gain
182
Matrix
Red Hue
0
Red Saturation
0
Green Hue
0
Green Saturation
0
Blue Hue
0
Blue Saturation
0
Yellow Hue
0
Yellow Saturation
0
Cyan Hue
0
Cyan Saturation
0
Magenta Hue
0
Magenta Saturation
0
21. MCM2082201-01
Settings [1/2]
Flip/Mirror
Normal
Settings [2/2]
Define Direct Function
Rotation
ALC Level
Push
Menu
Menu Setup
Language
English
Show Menu Time
10sec
Menu Display
HD & Video
Show Capture Time
1sec
Time & Date
YMD
Image on screen
Time & Date
OFF
Message
ON
Scene File No.
ON
JPEG
Quality
MID
File List Sorting
Sort ▲
22. MCM2082201-01
3.2 ALC
ALC ON
Mode Full Auto
Level
0%
Limits Press OK
Mask Area
No Mask
Gain
0.0dB
Shutter Speed
1/30
Back
ALC
Automatic Level Control with Shutter speed and Gain.
ALC mode ON or OFF.
[ALC]=ON: ALC function works and Exposure is adjusted automatically.
Under bright conditions, brightness is adjusted by high speed shutter.
Under dark conditions, it combines both Gain and Slow shutter, and adjusts
brightness.
Mode
Select ALC mode. There are Full auto, Shutter priority and Gain priority.
When [ALC] is off, you cannot change [Mode].
See “ALC Mode Settings” for more details.
Level
Set the level of ALC function. (-100～0～100%)
The larger value makes images brighter. The smaller value means darker.
（It changes the convergence values of auto adjustment. ）
If ALC [Mode] is OFF, [Level] is not available.
※ The menu items indicated in the
gray characters cannot be changed
its settings.
23. MCM2082201-01
Limits
It can be adjusted in the sub-menus below.
Shutter Limit (H)
Set the higher limit of shutter iris under ALC
mode.
(59.94i/p)
(50i/p)
1/30
1/25
1/60
1/50
1/100
1/100
1/250
1/250
1/500
1/500
1/1000
1/1000
1/10000
1/10000
[Shutter Limit (H)] is not available under the
condition below.
・[ALC Mode]=OFF
・[ALC Mode]=Shutter Priority
Shutter Limit (L)
Set the lower limit of shutter iris under ALC
mode.
(59.94i/p)
(50i/p)
1/2
1/2
1/4
1/3
1/8
1/6
1/15
1/12
1/30
1/25
1/60
1/50
1/100
1/250
1/500
1/1000
[Shutter Limit (L)] is not available under the
condition below.
・[ALC Mode]=OFF
・[ALC Mode]=Shutter Priority
Gain Limit(H)
Set the higher limit of Gain under ALC mode
within the range of 0.3 dB～76.5dB（0.3 Step）.
[Gain Limit (H)] is not available under the
condition below.
24. MCM2082201-01
・[ALC Mode]=OFF
・[ALC Mode]=Gain Priority
Gain Limit(L)
Set the lower limit of Gain under ALC mode within
the range of 0dB～65.7dB（0.3 Step）.
[Gain Limit (L)] is not available under the
condition below.
・[ALC Mode]=OFF
・[ALC Mode]=Gain Priority
25. MCM2082201-01
Mask Area
Set the ALC mask area.
(No Mask, S Circle, M Circle, L Circle, Manual)
No Mask: All of the area is used for calculation of ALC.
For the other settings, see “ALC Mask area settings”.
If ALC [Mode] is OFF, [Mask Area] is not available.
Gain
Set the value of Gain. （0.0～78.0dB, 0.3 step）
The larger Gain value makes images brighter.
If ALC [Mode] is ON, [Gain] is not available.
Shutter Speed
Set the shutter speed.
If ALC [Mode] is ON, [Shutter Speed] is not available.
59.94i/p ↔50i/p
When you change the video format between NTSC and PAL, the
parameter will be automatically changed to the nearest value if the
current parameter does not apply to the video format.
(59.94i/p)
(50i/p)
(59.94i/p, 50i/p)
1/2
1/2
1/125
1/4
1/3
1/250
1/8
1/6
1/500
1/15
1/12
1/1000
1/30
1/25
1/2000
1/50
1/4000
1/60
1/10000
1/100
26. MCM2082201-01
ALC Mask area settings
The screen is divided into 45 (5×9) areas. Select the masking/no masking area for the
photometric measurements of Auto Level Control.
These modes are effective to achieve the proper exposure values when the main object is under
the difficult conditions such as backlighting and oblique light.
S Circle, M Circle and L Circle are preset settings.
Select [Manual] mode and the 44 blocks of masking area can be changed individually. The 1
block in the center is fixed as no mask area and cannot be changed.
Mask Area (100%)
(No photometry)
Mask Area (50%)
No Mask Area
（100% source of
photometry）
S Circle: The size of photometric measurement area is small.
M Circle: The size of photometric measurement area is medium.
L Circle: The size of photometric measurement area is large.
27. MCM2082201-01
Select [Manual] mode and the menu appears as follows. Select [Yes] and the masking setting
screen is displayed.
Functions of Rotary knob
[ ]
Right rotate/move
[ ]
Left rotate/move
[Push]
Decide position
Push MENU and decide the area (max 44)
Do you open the area settings window?
Yes
Cancel
Mask Area (100%)
(No photometry)
No Mask Area
（100% source of photometry）
※No stripes
The 1 block in the center is set as no mask area (and can be changed to mask area if it is
necessary), and the others are mask area.
The current cursor position is dashed line block in the top left corner of the screen.
Rotate the rotary switch and move the cursor. Push the switch and select the current position.
Repeat operations and set the ALC mask area. The maximum number which can be set as
mask area is 44.
After masking is completed, press [MENU] and saving menu appears. Select [Yes] to save,
[Cancel] to back to the mask area setting menu.
28. MCM2082201-01
ALC Mode settings
Automatic exposure control is performed by ALC with electric shutter and gain.
At the ALC Mode, you can give priority to electric shutter or gain for automatic exposure control.
So you can set the suitable exposure mode for the targeting scene.
Full Auto
The Full Auto mode is controlled with electric shutter and gain. It is recommended to use this
mode normally.
The range of each item is adjustable with Shutter Limit and Gain Limit separately , and can
provide flexible exposure settings.
Below is example:
- Put restrictions on [Shutter Limit] value in order to suppress a flicker of a high-intensity
images.
- Change [Gain Limit] value for images that the S/N ratio performs important effect.
When you want to use slow shutter, change the value of [Shutter Limit (L)] into 1/30s (1/25s)
or lower.
※ Factory setting of [Shutter Limit (L)] is OFF (1/30s).
Shutter Priority
You can set any shutter speed, and exposure is automatically controlled with gain.
When the image contains the fast moving subjects, you can select high shutter speed so that
the target subject can be captured clearly.
For the solution of the flicker problems under fluorescent lighting, you can change the shutter
speed into 1/50s or 1/100s (50Hz locations).
Light
Dark
Shutter Limit（H）
Shutter Limit
Gain Limit（H）
High Speed Shutter
Gain
Slow Shutter
29. MCM2082201-01
[Note]
To change the value of [Shutter Speed], open the menu of [ALC] and select [Shutter Speed].
Light
Dark
Gain Limit（H）
Gain
Shutter Speed (1/2ｓ～1/10000ｓ)
30. MCM2082201-01
Gain Priority
You can set any gain value, and exposure is automatically controlled with shutter speed.
You can fix the gain to give priority on the S/N ratio if the target subject is in the dark
environment.
[Note]
To change the value of [Gain], open the menu of [ALC] and select [Gain].
Light
Dark
Gain （0dB～78.0dB）
High Speed Shutter
Slow Shutter
Shutter Limit（H）
Shutter Limit（L）
31. MCM2082201-01
3.3 Picture
WDR OFF
Black Level
0%
Auto Knee OFF
Gamma 0.45
White Clip
109%
DNR HIGH
Enhancer Gain
128
Back
WDR
Set the Wide dynamic range. (OFF, ON)
[WDR]= ON: A scene containing great differences in brightness will
be processed properly.
[WDR]=OFF: WDR is not available.
Default value is OFF.
Black Level
Set the value of Black Level. (-100 to 0 to 100%)
If [WDR] is ON, [Black Level] is not available.
Auto Knee
Set the mode of auto Knee adjustment. Default setting is OFF.
If [WDR] is ON, [Knee] is not available.
Gamma
Set the Gamma value. (0.35 to 0.55, OFF, 0.01 step)
Adjust the level of gamma correction by using waveform monitor or
color video monitor. Default value is 0.45.
The larger value means smaller gamma correction and the smaller
value means larger gamma correction.
When [Gamma] is OFF, it outputs linear video signal.
If [WDR] is ON or [Auto Knee] is ON, [Gamma] is not available.
White Clip
Set the White Clip point value. (100 to 109%, 0.5 step)
Adjust the White Clip point value by using waveform monitor or
color video monitor. Default value is 109%.
※ 設定によっては調整操作が行えない
項目もあります。
※ The menu items indicated in the
gray characters cannot be changed
its settings.
32. MCM2082201-01
※Normally you don’t have to change the White Clip point value.
DNR
Set the Digital Noise Reduction. (OFF, LOW, MID,HIGH)
DNR function is applied and noise will be reduced.
OFF
DNR is not available.
LOW
2D Noise Reduction
MID
2D＋3D Noise Reduction
HIGH
2D＋Hard 3D Noise Reduction
※ LOW ᐸ MID ᐸ HIGH The more DNR level will reduce the noise.
Default value is HIGH.
Enhancer Gain
Set the Enhancer Gain value. (0 to 255)
Adjust the level to emphasize outline of the video image.
[Enhancer Gain]=0: Enhancer Gain is not available.
The more Enhancer Gain value will apply more emphasis.
Default value is 128.
3.4 Color
WB Mode ATW
WB Shift Red
0
WB Shift Blue
0
ATW Speed
128
Red Gain
512
Blue Gain
512
Chrominance Gain
182
Matrix Press OK
Back
※ 設定によっては調整操作が行えない
項目もあります。
※ The menu items indicated in the
gray characters cannot be changed
its settings.
33. MCM2082201-01
WB Mode
Set White balance mode.
ATW
White balance is always adjusted automatically.
AWC
White balance is automatically adjusted by pushing
a [White balance button].
Manual
Manual control of R and B gain.
WB Shift Red
Adjust red value for white balance at ATW or AWC. (-30 to 0 to 30)
The more value means shift toward red.
If [WB Mode] is Manual, [WB Shift Red] is not available.
WB Shift Blue
Adjust blue value for white balance at ATW or AWC. (-30 to 0 to 30)
The more value means shift toward blue.
If [WB Mode] is Manual, [WB Shift Blue] is not available.
ATW Speed
Set the speed of white balance adjustment. (1 to 255)
Only [WB Mode]=ATW, [ATW Speed] is available.
Red Gain
Set the value of Red Gain. (0 to 1023)
Only [WB Mode]=Manual, [Red Gain] is available.
Blue Gain
Set the value of Blue Gain. (0 to 1023)
Only [WB Mode]=Manual, [Red Gain] is available.
Chrominance Gain
Set the value of Chrominance Gain. (0 to 255)
Chrominance Gain=0: Monochrome
The more value means more color intensity.
34. MCM2082201-01
Matrix
The Hue and Saturation of six axes is adjusted.
Red,Green,Blue,Yellow,Cyan,Magenta
Red Hue
Red hue is adjusted. （-10～0～10）
Red Saturation
Red saturation is adjusted. （-30～0～30）
Green Hue
Green hue is adjusted. （-10～0～10）
Green Saturation
Green saturation is adjusted. (-30～0～30）
Blue Hue
Blue hue is adjusted. （-10～0～10）
Blue Saturation
Blue saturation is adjusted. （-30～0～30）
Yellow Hue
Yellow hue is adjusted. （-10～0～10）
Yellow Saturation
Yellow saturation is adjusted.（-30～0～30）
Cyan Hue
Cyan hue is adjusted. （-10～0～10）
Cyan Saturation
Cyan saturation is adjusted. （-30～0～30）
Magenta Hue
Magenta hue is adjusted. （-10～0～10）
Magenta Saturation
Magenta saturation is adjusted.（-30～0～
30）
35. MCM2082201-01
3.5 Settings
[1/2]
HD Format
720/59.94p
3G-SDI Level_A/B
Level_A
Flip/Mirror
Normal
Ext Sync H-phase Adjust
0
Video Output Pattern
Live
Network PRESS OK
Setting to Factory
PRESS OK
[Next Page]
PRESS OK
Back
[2/2]
Define Direct Function
PRESS OK
Menu Setup
PRESS OK
Show Capture Time
1 Sec
Time & Date
PRESS OK
Image on Screen
PRESS OK
JPEG PRESS OK
IR Remote Control
ON
Full HD Display Mode
Dot by Dot
Back
HD Format
Set the HD-Video Format.
(1080/59.94i, 1080/59.94p, 720/59.94p, 1080/50i,
1080/50p, 720/50p)
Changing the Video Format requires a reboot of the CCU.
36. MCM2082201-01
3G-SDI Level A_B
Select the monitor signal with the 3G-SDI (1080 50p/60p)
interface. (Level A, Level B)
1080 50P/60P transmission standard:
The SMPTE 425 standard specifies Level A direct mapping and
Level B Dual-Stream mapping.
This product accepts both settings. You can choose one
according to the environment to be used.
Flip/Mirror
Flip or mirror videos.
Normal
No flip or mirror
Flip
Reverse up to down
Mirror
Reverse left to right
Flip & Mirror
Reverse up to down and
left to right
Ext Sync H-phase Adjust
Adjustment of H phase of the external synchronizing signal.
Video Output Pattern
Set the video test pattern.
(Live, Color bar, Gray Scale, Cross Line)
Network
Set the network
Item
Default value
IP Address
192.168.1.100
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.254
Setting to Factory
It allows you to reset all setup menu items to the factory
settings.
This function requires a reboot of the CCU.
The message “Proceed” momentarily appears on the monitor.
It goes to no video signal and then will go back to normal.
37. MCM2082201-01
Define Direct Function
While on-screen menu is not activated, frequently used
functions can be assigned to the rotary switch for direct
operation.
A function can be assigned to a rotation of knob, and another
function to a push of knob.
Select each function in submenu.
Rotation
ALC Level, Gain, Shutter
Speed, Gamma, None
Push
Menu, None
Menu Setup
Setup menu options.
Language
English, Japanese
Show Menu Time
5Sec, 10Sec, 15Sec, 20Sec,
25Sec, 30Sec, INFINITE（※1）
Menu Display
HD & Video, Video
Password Lock
ON, OFF （※2）
※1 If [Show Menu Time] is set to INFINITE, the on-screen
menu keeps showing up. In that case, please note that items
which are set to display ON with the menu of [Image On
Screen] are no longer displayed.
※2 If [Password Lock] is set to ON,password will be able to
set up .
It stops operation of the front panel during a lock.
It can be operated, if the MENU button is pushed and a
password is entered.
Show Capture Time
Set the showing interval of JPEG image. When jpeg capturing
is executed, the idle time period of showing the image can be
changed. (1Sec, 3Sec, 6Sec, OFF)
If [Show Capture Time] is OFF, it doesn’t freeze.
38. MCM2082201-01
Time & Date
Set the time and date options.
YMD
2011 05 31 16：40
DMY
31 05 2011 16：40
MDY
05 31 2011 16：40
Image on Screen
While the on-screen menu is not displayed, some selected
information can be displayed in the lower right corner.
These items can be set individually.
Time & Date
Time and Date (ON, OFF)
Message
Status and error message (ON, OFF)
Scene File No.
The number of the current scene file
(ON, OFF)
→ See the chapter of On Screen Display for details.
JPEG
Adjust below items.
Quality
Select JPEG picture quality.
(High, Mid, Low)
File List Sorting
Select sorting condition of
JPEG file list.
(Sort ▲, Sort ▼)
IR Remote Control
Activate IR remote controller.
(ON, OFF)
Full HD Display Mode
Set the display mode
[HD Format]
1080/59.94i , 1080/59.94p , 1080/50i , 1080/50p
Dot by Dot
It displays into the frame of a
screen without expanding.
Up Convert
It expands and displays on the
screen.
39. MCM2082201-01
1280x720(pixels) ⇒
1920x1080(pixels)
40. MCM2082201-01
3.６ Information
[1/2]
Model Name:
SSC-9000
Serial Number:
xxxxxxxxx
Firm Version:
x.xxx (xxx)
FPGA Version:
x.xxx
Current Scene File:
Scene file X
HD Format:
720/59.94p
Date & Time:
YYYY/MM/DD HH:MM
IP Address:
xxx.xxx.xxx.xxx
MAC Address:
xx:xx:xx:xx:xx:xx
[Next Page]
[2/2]
Connected Camera Head
Name
:
xx-xxxx
Serial
:
xxxxxxxxx
Version
:
xx
Product Code
:
x.x.x
Paired Camera Head
Name
:
xx-xxxx
Serial
:
xxxxxxxxx
Back
Model Name
The model name is displayed. SSC-9000
Serial Number
The serial number is displayed.
Firm Version:
The version of firmware is displayed.
FPGA Version:
The version of FPGA is displayed.
Current Scene File:
The number of the current scene file is displayed.
HD Format:
The current video format is displayed.
41. MCM2082201-01
Date & Time:
The current time and date is displayed.
IP Address:
The current IP address is displayed.
MAC Address:
The MAC address is displayed.
Connected Camera Head
The information on the connected camera head is
displayed.
Name
The model name is displayed.
Serial
The serial number is displayed.
Version
The version of FPGA is displayed
Product Code
The product code is displayed.
Paired Camera Head
The information on the adjusted camera head with
pair CCU is displayed.
Name
The model name is displayed.
Serial
The serial number is displayed.
Use in a pair CCU and the camera head which were
always enclosed.
Model name and Serial number are the same at
[Connected Camera Head] and [Paired Camera
Head]
If they are different, adjustment is required again.
Please contact your dealer or sales representative.
42. MCM2082201-01
On-Screen Display
Some information can be displayed over the video monitoring or JPEG playback screen.
1. On-Screen Display
While on-screen menu is not activated, some selected information can be displayed in the lower
right corner. In the menu of [Image on Screen] you can set on/off of display for each item
individually.
①
Status and error message. (ON, OFF)
②
The number of the current scene file. (ON, OFF)
If you add any changing to the settings, the value is memorized as a
temporary scene file and ‘+’ is added to the current scene file name.
It will be kept until the other scene file is loaded. If the newly
changed setting is necessary later, store the value as a scene file.
③
Time and Date. (ON, OFF) The factory setting is OFF.
ALC(1/30)
Scene 1
2011/12/01 12:00
①
②
③
43. MCM2082201-01
1.1 Message
Message
Status
Note
Freeze
Normal
Freeze
Capturing
Capturing a JPEG image
File name and date
[SSC_0001.JPG 2011/11/30
23:59]
Playing JPEG file
File name and saved
time/date
ALC（1/30)
ALC is working
(Shutter speed)
AWC Done
AWC has been done
JPEG Stored
JPEG file has been stored to USB
device
AWC Failed
Abnormal
AWC has been failed.
Because of overexposure or
underexposure, AWC has been
failed.
Adjust the exposure
correctly with iris and
other items, and try
AWC again.
Reading USB-device
Normal
JPEG save
Reading USB
device
No USB-device found
Abnormal
USB device has
not been found
Can't write USB-device
Cannot write to
USB device
Can't create a JPEG file
Failed to create a
JPEG file.
The file of size 0 is
generated. Remove
the USB device from
the CCU, and confirm
the contents of it.
Please make sure
that there is enough
free space left on the
device
Reading USB-device
Normal
JPEG load
Reading USB
device
No USB-device found
Abnormal
USB device has
not been found
Can't read USB-device
Cannot read USB
device
The folder cannot be
load in the system.
A JPEG file structure may have
broken
The JPEG file may
have broken.
The message is
displayed when the
format of JPEG file is
not supported in the
system.
Lock
Normal
Operation
of the front
panel
switch
Locked
Shown when the
switch is pushed.
Please readjust for White Defects
Abnormal
Error at
the
camera
head
Compensation of
white defects are
required.
Adjustment is
required
again.
Please contact
your dealer or
sales
44. MCM2082201-01
representative.
Data error occurred at CAMHED
Sec7
Failed to load the
initial data.
Camera operation is
available under this
error.
Please wait a while. Initializing…
Normal
It is during initial setting.
A screen becomes a
color bar during
initial setting.
45. MCM2082201-01
2. On-Screen Display (JPEG images)
The system can playback the JPEG files from the USB device. The list is maximum 10 lines.
Sorting can be changed in the menu of [JPEG File List sorting].
SSC_0001.jpg [2012/07/01 15:20]
SSC_0002.jpg [2012/07/01 16:20]
SSC_0003.jpg [2012/07/01 17:20]
SSC_0004.jpg [2012/07/01 18:20]
SSC_0005.jpg [2012/07/01 19:20]
SSC_0006.jpg [2012/07/01 20:20]
SSC_0007.jpg [2012/07/01 21:20]
SSC_0008.jpg [2012/07/01 22:20]
SSC_0009.jpg [2012/07/01 23:20]
SSC_0010.jpg [2012/07/02 00:20]
The folder is created automatically in a USB device.
\DCIM\100SSC90
46. MCM2082201-01
Specifications
■Camera Head Section
Imaging Device
Single CMOS / RGB Bayer
Total pixels
1408(H)×1042(V) (Approx. 1.47 megapixels)
Valid pixels
1288(H)×1032(V) (Approx. 1.33 megapixels)
Pixel size
7.1μm(H)x7.1μm(V)
Scanning area
2/3 type
Scanning system
Progressive
Sensitivity
F16 2000lx
Minimum Illumination
0.005lx（1/30、50IRE、+66dB）
S/N
> 50dB (γ=1, Detail OFF)
CCU connecting port
RJ45×1 ( with screw locking )
■Interface
Video output Jacks
HDMI×1
HD-SDI (BNC)×1
Composite (VBS) (BNC)×1
Synchronization
External synchronization (VBS/2) BNC×1
USB
USB2.0×1 (For still image saving and previewing only.)
Serial port
RS-232C（D-Sub 9pin male)×1
Relay interface
2 terminals (Unused pin among a serial port will be used.)
LAN
RJ45×1 (10Base-T、100Base-TX)
IR receiver
×1 (Front panel), ×1(Extension terminal at rear panel)
※IR remote control is optionally available.
Camera connecting port
RJ45×1
Video output Format
HDMI
1920 × 1080/59.94p, 1920 × 1080/59.94i,
1920×1080/50p, 1920× 1080/50i, 1280 ×
720/59.94p, 1280×720/50p
HD-SDI
1920 × 1080/59.94p, 1920 × 1080/59.94i,
1920×1080/50p, 1920× 1080/50i, 1280 ×
720/59.94p, 1280×720/50p
Composite
NTSC, PAL Down convert (Letterbox)
Still image saving
format (USB)
JPEG (1280×1024)
47. MCM2082201-01
■General
DC Input Voltage
DC12V ±10% (Ripple 50mVp-p ) ※AC Adaptor included.
Power Consumption
< 13W
Operating
Temperature/Humidity
0 to 45 °C ( 32 to 113°F ) / 35 to 90%
Storage
Temperature/Humidity
－20 to 60 °C ( -4 to 140°F ) / 20 to 90%
External Dimensions
Camera Head
※ w/o tripod
adaptor.
46.0(W)×55.2(H)×51.9(D)mm
CCU
170.0(W)×47.0(H)×183.5(D)mm
Weight
Camera Head
※ w/o tripod
adaptor.
120g ( 0.35 lbs)
CCU
Approx. 1.10kg ( 2.43 lbs)
■Image processing functions
Image adjustment
ALC
Full-Auto / Shutter priority / Gain priority
Gain
AUTO/MANUAL (0～78dB)
Shutter speed
1/2,1/4,1/8,1/15,1/30,1/50,1/60,1/100
1/125,1/250,1/500,1/1000,1/2000
1/4000,1/10000
Gamma correction
Variable 0.35～0.55 ,OFF
Knee
Fixed / Auto
White clip
Variable 100～109%
WDR
OFF / ON
DNR
OFF,LOW,MIDDLE,HIGH
White balance
ATW / AWC / MANUAL
R/B gain
Variable 0～1023
Black level
Variable -100～0～100
Chroma correction
Variable 0～255
Electric zoom
x2
Image invert
Top/Bottom, Left/Right, Top/Bottom and Left/Right Invert
Picture freeze
Freeze live image
Scene files
max. 5
OSD
Operating menu, Message, Time and Scene file# etc.
Internal test pattern
Color bar, Grayscale, Cross-line
48. MCM2082201-01
■Outline
Unit:mm
CCU
170
1
5
8
.
8
1
8
3
.
5
4
4
3
49. MCM2082201-01
Camera head
50. MCM2082201-01
●Features and specifications are subject to change without notice.●Our product names are
trademarks or registered trademarks of Carina System. ● Other company names and product
names are trademarks or registered trademarks of the respective companies.
KC-1000User’s Guide
May2014
Komamura Corporation
3-2-4 Nihonbashi Ningyo-cho, Chuo-ku,
Tokyo Japan zip:103-0013
http://www.komamura.co.jp
Loading...