Kolpin FRB-48, FRB-60 User Manual

FRB-48/60 – Rear Blade

No. Part Name Description Qty

1 Blade Assembly 48” or 60” 1
2 Cutting Edge 48” or 60” 1
3 Swivel Yoke Assembly 1
4 Swivel Bracket Assembly 1
5 Large. Washer with 3/4" Hole 1
6 Bent Hitch Pin 5/8" x 3" 1
7 Bent Hitch Pin 5/8" x 4" 1
8 Nylock Nut 3/4" 1
9 Carriage Bolt 5/16" x 1-1/4" 7 or 9
10 Washers 5/16" 7 or 9
11 Nylock Nut 5/16" 7 or 9
12 Bolt 5/16" x 1" 8
13 Lock Washer 5/16" 8
14 R-Pins - Keeper Ф3mm 2

Assemb ly Instructions:

1. Secure #2 (Cutting Edge) to #1 (Blade Assembly) with 5/6” Carriage Bolts, Washers
and Nylock Nuts.

2. Secure #4 (Swivel Bracket Assembly) to #1 (Blade Assembly) with (8) 5/16” Hex
Bolts and Lock Washers.

3. Secure #3 (Swivel Yoke) to #4 (Swivel Bracket Assembly) using #5 (Large Washer)
and #8 (3/4” Nylock Nut).

4. Use #7 (4” Bent Hitch Pin) at Pivot Location

5. Use #6 (3” Bent Hitch Pin) to secure Rear Blade to Accessory Tool Bar Location.

For additional assistance, please contact our customer service department at (877)-9KOLPIN or

[e-mail].

Kolpin Powersports, Inc.
205 N Depot Street
Fox Lake, WI 53933

Phone: [phone]
Web: www.kolpinpowersports.com