Kolpin 89735 User Manual

Rev. 1

Item

Description

Quantity

1

Mounting Base Plate

1 2 Mounting Bracket Plate

1 3 Molded Tank Bracket

1 4 ¼” x ¾” Truss Head Bolt

8 5 ¼” – 20 U-Bolts

3

6

¼” Washers

10 7 ¼” - 20 Nylock Nut

14 8 Rubber Caps

6

9

T-Knob

1

10

Fuel Pack

1

89735 – Fuel Pack Jr. With Bracket

Parts List:

Note: For mounting a full size Fuel/Water Pack, you will need

to use 2 Pack Brackets, where if you mount a Fuel/Water
Pack Junior, 1 Pack Bracket is required.

ATV Usage:

Before assembling the mounting bracket to anything, be sure to align the fuel or water cell to
the position desired to make a sure fit. Once confirmation of fit is achieved, locate the position of
the Mounting Bracket and mount to ATV rack using the U-Bolts, Washers and Nuts provided. The
mounting plate is also compatible with the Gear Lock and Load plate (P/N – 26300 SOLD
SEPERATELY) which allows you to quickly and easily add and remove virtually all Kolpin
Accessories. To attach the bracket to you ATV, simply place the (3) U-Bolts provided on the
bottom side of the Rack and up through the Mounting Plate. Then place the (6) Washers on the U­Bolt so it sits flat on the Mounting Plate. Tighten securely using the (6) Nylock Nuts Provided. The
Rubber Caps are then placed over the protruding threads of the U-Bolts.

UTV Usage:

To use the Fuel Pack Bracket on your UTV, the 26400 - Utility Gear Rail System is needed.

Rev. 1

Gear Lock and Load Bracket

Plate, in all positions shown above, is designed to slide

Push down tab slide out plate.

Plate mounts directly to

2 1 3 9 4

7

(SOLD SEPARATELY)

ATV rack.

into Gear Lock and Load for quick and easy
attachments of Kolpin Accessories.

Kolpin Outdoors, Inc.

205 N. Depot Street, Fox Lake, WI

Phone #: (877) 9KOLPIN or [phone]

www.kolpin.com [e-mail]