Kold-Draft T-261 User Manual

Ice Crusher
T270
T270
SHOWN WITH GB560 SERIES ICE MACHINE AND B650D BIN
KOLD-DRAFT makes the only square cube.
Choose cube style—full cube (1-1/4" x 1-1/4" x 1-1/4") or half cube (1-1/4" x 5/8" x 1-1/4")—for one side of the bin and fill the other side with crushed ice.
The Big Crush
Need cubes and crushed ice? Our Ice Crushers are designed to work with the GB Series Classic Cubers, resulting in a half-and-half machine that makes and stores cubes and crushed ice, or two dierent sizes of cubes in side-by-side bins. An external knob allows the operator to “order” cubes or crushed ice, which can be separated in the bin with an optional bin divider.
KOLD-DFT ice machines feature a unique “upside-down” horizontal evaporator and water plate assembly. As water is sprayed upward into the evaporator cells, the pure water freezes rst while particulates and air are forced out and dumped at the end of each cycle. is leaves only perfect crystal-clear cubes, nearly as pure as distilled water.
KOLD-DFT’s T270 crushers are recognized for longer life and lower maintenance than ake ice machines. Plus, they are energy ecient, using environmentally friendly R-404A refrigerant. To facilitate maintenance, the T270 is serviceable from the front and is armed
with our 3-year “bumper-to-bumper” warranty on all parts and labor.
It’s NIce to be NotIced
1525 E. Lake Road • Erie, PA 16511 • 800.840.9577 • fax 800.548.9392 • www.kold-draft.com
T270 ICE CRUSHER
Stainless steel cabinet, crusher mechanism, and hopper for cleanliness, corrosion resistance, and long life.
Crusher mechanism has ball bearings for durability.
Dual voltage, 50/60 Hz. motor. 1/3 HP capacitor start energy saver motor.
Provides for crushed and cubed ice when used with a divided bin.
Safety interlock provided to prevent operation of crusher when panels are removed.
Note: Always disconnect power before cleaning or servicing equipment. Automatic motor operation when used with KOLD-DRAFT GB Series Ice Machines. Pre-wired to operate with either one or two KOLD-DRAFT GB Series Ice Machines.
General Specifications for T261/T264 and T271/T274
Model
Number
T261 115/50-60/1 2 7.2 15 104-126V GB351/GB451
T264 208-230/50-60/1 2 4.1 15 198-253V
*T271 115/50-60/1 2 7.2 15 104-126V GB561
*T274 208-230/50-60/1 2 4.1 15 198-253V GB564/GB1064
1
Use this value to determine minimum wire size as per National Electrical Code Standards.
*T271/T274 models are for new GB560 and GB1060 Series Energy Efficient Models.
Voltage
(V/HZ/PH)
Number of
Wires
Min. Circuit
Ampacity
1
Max. Fuse
Size
Operating
Range
Use with Models
GB354/GB454/GB654/GB1254
GB357/GB457/GB657/GB1257
Clearance Requirements:
Allow 6" minimum clearance at the back and top, 4" left side and 8" right side for ventilation and utility connections.
We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice.
Dimensions/Weight
Description
T260 42.3 (107.4) 24 (61) 15.5 (39.4) 144 (65k)
T270 42.3 (107.4) 24 (61) 15.5 (39.4) 144 (65k)
Dimensions - inches (cm)
W D H
Ship Weight
# (kg)
D
H
W
Quality US-Made Commercial Ice Machines ©2012 KDIndustries, Erie, PA Printed in U.S.A KD-LIT 02/12
1525 E. Lake Road • Erie, PA 16511 • 800.840.9577 • fax 800.548.9392 • www.kold-draft.com
Loading...