Kold-Draft AKD125 User Manual
Ice Cube and
COMPONENT
Water Dispenser
AKD125
SHOWN WITH GT360 SERIES ICE MACHINE
AKD125
Full Cube
1-1/4" x 1-1/4" x 1-1/4"
Half Cube
1-1/4" x 5/8" x 1-1/4"
On Demand
Fill ’em up. Where on-demand ice and water are needed, the KOLD-DFT AKD125
Automatic Ice Cube and Water Dispenser is the solution. Ideal for hospitals, training
facilities, clinics, nursing homes, hotels, resorts, and schools, the AKD125 features one-hand,
pushbuon dispensing for ease of operation when lling containers and ice buckets. For cool,
clear ice water, an optional water valve and tapered ice spout facilitate glass lling.
e auger feed mechanism prevents the waste, spillage, and splashing problems caused by
gravity dump machines. When demand for ice is low, an optional thermostatically controlled
ice agitator keeps the ice in the bin in small dispensable pieces. Like all KOLD-DFT
equipment, the AKD125 features corrosion-resistant stainless steel exterior and frame.
KOLD-DFT ice machines feature a unique “upside-down” horizontal evaporator and
water plate assembly. As water is sprayed upward into the evaporator cells, the pure water
freezes rst while particulates and air are forced out and dumped at the end of each cycle. is
leaves only perfect crystal-clear cubes, nearly as pure as distilled water. Maintenance is easy,
and the AKD125 is armed with our 3-year “bumper-to-bumper” warranty on all parts
and labor.
It’s NIce to be NotIced
™
1525 E. Lake Road • Erie, PA 16511 • 800.840.9577 • fax 800.548.9392 • www.kold-draft.com
AKD125 ICE CUBE AND WATER DISPENSER
Exterior:
All stainless steel standard.
Interior:
Rotationally molded polyethylene.
Plumbing Connections:
Two 3/4" I.D. flex tubing or drains.
Bin drain is isolated for sanitation.
Electrical:
7/8" diameter opening for conduit
fitting. Field connection access on
rear panel.
Motor:
PSC type with automatic thermal
overload.
Storage Capacity:
Approx. 125 lbs. (56.67 kg)
Insulation:
Polyurethane foam.
Ice Agitation:
We recommend agitation to keep the ice
in small, dispensable pieces when the
AKD is not in use for long periods of time.
The optional field-installed agitation kit is
102116901.
Mechanism:
Motor-driven auger.
Loading:
Installation must include KOLD-DRAFT
Classic GT Series Ice Cuber.
General Specifications for AKD125 Dispenser
Model
Number
AKD125 125 lbs. (56.7 kg) 115-60-1 2 1.9 1/12
Note: Electrical specifications are sized for within 80 ft. or less. All AKD125s should be
wired on a separate circuit.
Clearance Requirements:
Allow clearance at back for connections. See Ice Maker specifications for ventilation clearance
requirements.
Rated Storage
Capacity
Voltage
Characteristics
Number of
Wires Plus
Ground
FLA HP
Spout:
Universally sized for glass filling
and bucket filling.
Operation:
Dispensing is continuous when
push-button is held.
Water/Glass Filler Option:
Requires a separate portable
water line 1/2" F.P.T. connection.
The optional field-installed filler
kit is 103100101.
We reserve the right to make product improvements at any time. Specifications and design are
subject to change without notice.
Dimensions/Weight
Description
AKD125 30.125 (76.5) 25.25 (64.1) 44.5 (113) 169 (77)
Dimensions - inches (cm)
W D H
Ship Weight
# (kg)
H
D
W
Quality US-Made Commercial Ice Machines ©2012 KDIndustries, Erie, PA Printed in U.S.A KD-LIT 02/12
1525 E. Lake Road • Erie, PA 16511 • 800.840.9577 • fax 800.548.9392 • www.kold-draft.com
Loading...