Kohl's 61SRR51 Assembly Instructions Manual

PART LIST QUANTITY

SONOMA 30" FIRE PIT ASSEMBLY INSTRUCTIONS

ASSEMBLE ON A FLAT, PROTECTED SURFACE.

STYLE #:

PHILLIPS HEAD SCREWDRIVER AND WRENCH NEEDED FOR ASSEMBLY; NOT INCLUDED.

61SRR51

FLAT WASHER

SAVE THESE INSTRUCTIONS

BOLT

FIGURE DESCRIPTION

A 1 PC

B 1 PC

C 1 PC

D 1 PC

E 1 PC

F 4 PCS

HANDLE

MESH COVER

WOOD GRATE

FIRE BOWL

RING

LEGS

G 1 PC

H 1 PC + 1 PC

I 12 PCS + 1 PC

J 12 PCS + 1 PC

POKER

NUT

Page 1/3

INJURY.

61SRR51

STEP 1

A. INSERT HANDLE (A) INTO HOLE IN MESH COVER (B)

AND SECURE IT WITH NUT (H) USING WRENCH, NOT

STYLE #:

ASSEMBLY INSTRUCTIONS (CONTINUED)

INCLUDED. TIGHTEN COMPLETELY.

STEP 2

A. PLACE FIRE BOWL (D) UPSIDE DOWN ON FLAT,
PROTECTED SURFACE.

B. ATTACH LEGS (F) TO FIRE BOWL (D) WITH BOLTS (I)
AND FLAT WASHERS (J) USING PHILLIPS HEAD
SCREWDRIVER, NOT INCLUDED. TIGHTEN
COMPLETELY.

STEP 3

A. ATTACH RING (E) TO LEGS (F) WITH BOLTS (I) AND
FLAT WASHERS (J) USING PHILLIPS HEAD
SCREWDRIVER, NOT INCLUDED. TIGHTEN
COMPLETELY.

STEP 4

A. ROTATE ASSEMBLED UNIT TO THE STANDING
POSITION.

B. PLACE WOOD GRATE (C) INTO POSITION IN FIRE
BOWL (D).

C. PLACE MESH COVER (B) ON TOP OF FIRE BOWL (D).

D. USE POKER (G) TO REMOVE AND REPLACE MESH
COVER (B) WHEN IN USE TO PREVENT BURNING

Page 2/3