ARCHERTM
Features
Acrylic
•
Blower motor with 300 W heater, and electronic user
•
control
Blower motor is supplied with a grounding-type
•
plug-in cord
120 BubbleMassage
•
Drop-in
•
Slotted overflow for maximum bathing depth
•
Low threshold height
•
Integral lumbar support
•
Armrests
•
60″ (1524 mm) x 32″ (813 mm) x 19″ (483 mm)
•
TM airjets
Codes/Standards Applicable
Specified model meets or exceeds the following:
ADA
•
CSA B45.5/IAPMO Z124
•
IAPMO IGC 171
•
ASTM E162
•
ASTM E662
•
UL 1795
•
Specified Model
5’ BUBBLEMASSAGETM BATH WITH
AIRJETS
K-1122-G
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
NA: None applicable
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1122-G Drop-in rim style ❑ 0 ❑ Other_____
Required Accessories
K-7271 Clearflo slotted overflow brass bath drain OR ❑ CP ❑ Other_____
K-7272 Clearflo slotted overflow bath drain – PVC pipe ❑ CP ❑ Other_____
Recommended Accessories
K-1446 Remote blower/motor installation kit NA
Product Specification
The drop-in acrylic bath with airjets shall be 60″ (1524 mm) in length, 32″ (813 mm) in width, and 19″ (483 mm) in height. Bath
shall have a blower motor with 300 W heater, and an electronic user control. The blower motor shall have a grounding-type
plug-in cord. Bath shall have 120 BubbleMassage airjets. Bath shall have slotted overflow for maximum bathing depth and low
threshold height. Bath shall have an integral lumbar support and armrests. The bath with airjets shall be Kohler Model
K-1122-G-_______.
Page 1 of 2
1071360-4-
F
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
ARCHERTM
Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
Basin area, top 52-3/4″ (1340 mm) x 25-5/16″
Weight 84 lbs (38.1 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Drop-in cutout 58-1/2″ (1486 mm) x 30-1/2″ (775 mm)
Blower
motor:
45-1/8″ (1146 mm) x 19-11/16″
(500 mm)
(643 mm)
Heater V Hz A
300 W 120 60 5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor: 120 V, 15 A, 60 Hz
Blower motor is supplied with a 24″ (610 mm)
grounding-type plug-in cord.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 45 lbs/square foot (218 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
This product is designed for a drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
16"
(406 mm)
1-1/4"
(32 mm)
2-1/2"
(64 mm)
1-1/2"
Bath Drain
11-1/4"
(286 mm)
60" (1524 mm)
4-1/8"
(105 mm)
No change in measurements if connected
with drain illustrated. (K-7271 or K-7272)
1-1/2"
(38 mm)
Drop-In Rim
Detail
Blower Motor Access
20" (508 mm) W x
15" (381 mm) H
32" (813 mm)
19"
(483 mm)
3/4" (19 mm)
Product Diagram
ARCHERTM 5’ BUBBLEMASSAGETM BATH WITH AIRJETS
Page2of2
1071360-4-
F
Loading...