Kohler SAN RAPHAEL K-3722T-C, SAN RAPHAEL K-3722T, SAN RAPHAEL K-3722T-PG, SAN RAPHAEL K-3722T-BG, SAN RAPHAEL K-4027T Installation Instructions Manual
...
SAN RAPHAEL CLASS FIVE
TM
INSTALLATION INSTRUCTIONS
VITREOUS CHINA SKIRTED TRAPWAY ONE-PIECE TOILET
S-TRAP 305mm K-3722T/K-3722T-C/K-3722T-PG/K-3722T-BG
S-TRAP 400mm K-4027T/K-4027T-C
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the
·
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and
·
warranty information -.please leave instructions for the
consumer
ORDERING INFORMATION
SAN RAPHAEL Class 5 Skirted Trapway
1-PC Toilet 305mm .......................................................K-3722T
Includes SAN RAPHAEL Quiet-close Toilet Seat ...K-4195T
SAN RAPHAEL Class 5 Skirted Trapway
1-PC Toilet 305mm ....................................................K-3722T-C
Includes ........K-4713T
SAN RAPHAEL Class 5 Skirted Trapway
1-PC Toilet 305mm..................................................K-3722T-PG
Includes SAN RAPHAEL Quiet-close Toilet Seat ...K-4195T
SAN RAPHAEL Class 5 Skirted Trapway
1-PC Toilet 305mm..................................................K-3722T-BG
Includes SAN RAPHAEL Quiet-close Toilet Seat ...K-4195T
SAN RAPHAEL Class 5 Skirted Trapway
1-PC Toilet 400mm .......................................................K-4027T
Includes SAN RAPHAEL Quiet-close Toilet Seat ...K-4195T
SAN RAPHAEL Class 5 Skirted Trapway
1-PC Toilet 400mm ....................................................K-4027T-C
Includes ........K-4713T
TM
TM
TM
French Curve Quiet-close Toilet Seat
TM
TM
TM
TM
TM
TM
TM
French Curve Quiet-close Toilet Seat
·
·
·
-
305mm......................................................K-3722T
..................................K-4195T
305mm ..................................................K-3722T-C
.....................................K-4713T
305mm ...............................................K-3722T-PG
..................................K-4195T
305mm ...............................................K-3722T-BG
..................................K-4195T
400mm......................................................K-4027T
..................................K-4195T
400mm ..................................................K-4027T-C
.....................................K-4713T
NOTES
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 140mm (5-1/2") centers.
·
51mm (2") passageway.
·
Water depth from the rim is 160mm .
·
Ensure that the new drain has the correct roughing-in
·
(5-1/2")
dimension. This toilet has a 305mm/400mm roughing-in
dimension. .
Closet flange must be 305mm/400mm on-center from wall.
·
Carefully inspect the new fixture for any sign of damage.
·
For new construction, refer to the dimensions in
·
and Fig. #4
Fixture dimensions are nominal and conform to tolerances
·
See Fig. #1
for locating the shut-off valve.
established by ASME Standards (A112.19.2-2008).
1128502-T01-E
Fig. #1
·
·
·
·
51mm
·
·
305mm/400mm( 1)
·
·
·
·
2008.
-1-
140mm
160mm
305mm/400mm
14
ASME A112.19.2-
, 2012
Copyright Kohler China Ltd., 2012
WARNING: Risk of personal injury or product
damage
: Handle vitreous china products very carefully.
Vitreous china can break and chip if you overtighten
bolts and nuts.
WARNING: Risk of external leakage
. The fill valve
nut has been factory-tightened to design specifications.
If re-tightening is required, wrench tighten one turn
past finger tight .
TOOLS AND MATERIALS REQUIRED (Not
supplied)
·
254mm (10") adjustable wrench
·
305mm (12") pipe wrench
·
Metal file (file cut)
·
Tape measure
·
Tubing cutter
·
Level
·
Hacksaw
·
Putty knife
·
Screwdriver
·
Toilet gasket (wax seal)
·
Toilet T-bolts (2), 8mm (5/16") diameter
·
Toilet supply shut-off valve, 10mm(3/8 ) recommended
NOTICE:
If the existing toilet does not have a supply shut-off
valve below the tank, install one before installing the new
toilet.
"
·
·
·
·
·
·
·
·
·
·
·
·
254mm
305mm
8mm T 2
10mm
Reference Value
Finished Wall
305
743
C
OF OUTLET
L
Unit: mm
:
K-3722T/K-3722T-C
K-3722T-PG/K-3722T-BG
FRONT OF BOWL
519
411
610
380
284
67
194
1128502-T01-E
-2-
Finished Wall
K-4027T/K-4027T-C
FRONT OF BOWL
743
380
400
C
OF OUTLET
L
Kohler reserves the right to change marked dimensions without prior notice.
INSTALLATION
TO REMOVE EXISTING TOILET
Turn off the water supply. Flush the toilet, and use a sponge
to remove the remaining water from the tank and bowl.
Disconnect the supply shut-off valve (if present), and remove
the old tank and bowl.
519
316
610
379
67
194
Fig.#1
1
()
Remove the old gasket from the floor
and the closet flange with a putty knife.
Remove the old T-bolts and discard
them.
NOTICE:
installed immediately, temporarily stuff
if the new toilet is not
Closet Flange
a rag into the closet flange.
NOTICE: Do not use white cement or high lime content
cements to install this toilet. The expansion of cement due to
a rise in temperature may make the toilet crack or cause
damage. Kohler is not responsible for any damage caused by
installation with the use of cement.
TO INSTALL SUPPLY
SHUT-OFF VALVE
Install the supply shut-off valve so it is
67mm (2-5/8") above the finished floor
line, and 194mm (7-5/8") to the left of
the closet flange centerline.
The centerline of the supply shut-off
valve outlet should extend 67mm
(2-5/8") from the finished wall. Install
the supply shut-off valve with the outlet
vertical.
67
305/400
Supply Shut-Off Valve
Fig.#3
3
194
Fig.#2
2
Closet Flange
Centerline
mm 194
T
67
mm
67mm;
1128502-T01-E
-3-
Loading...