Kohler PURIST 7507T-B4 Installation Instructions Manual

INSTALLATION INSTRUCTIONS

PURIST

7507T-B4 Single Hole Kitchen Faucet

BEFORE YOU BEGIN

All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.

Please leave these instructions for the consumer. They contain important information.

NOTES:

1. Flush the water supply pipes thoroughly to remove debris.

2. If possible, install this faucet before installing sink.

HANDLE OPERATION

Lift the handle gently. Turn clockwise for cold water; turn counter-clockwise for hot water.

ROUGH-IN DIMENSIONS

63.5 MAX

77

203.2

309.2

245

94

57.6

Ø33~Ø40

370

G1/2˝

1230971-2A-D 1

INSTALLATION

How to Install the Faucet

Install the mounting stud(1) into the faucet body base(2). Stick the
washer(3) under the body assembly. Insert the flexible supply hoses(4)
into the sink.

From underside of the sink, place the washer(5) (rubber washer is on the
top) and the nut(6) onto mounting stud. Position the faucet so that the
handle is on the right side. Tighten nut to secure faucet to the sink.

Attach the hoses to water supplies. When facing the faucet, the hose in
front connects to hot water, the back hose with ‘COLD’ label connects to
cold water.

INSTALLATION CHECKOUT

Ensure that all connections are tightened and the handle is in the off
position.

SERVICE PARTS

7507T-B4 Single Hole Kitchen Faucet

1237493**

3

2

4

1

5

6

1213241

1101479

1099021

870533

1099015

1101283

1222606

3006146

1099016**

PURIST

1243258**

Open the drain. Turn on main water supply and check for leaks. Repair
as required.

8

7

Remove the aerator(8) with the key(7). Turn the faucet handle on. Run
hot and cold water through the spout for about one minute to remove any
debris. Remove debris from the aerator. Shut off the faucet and reinstall
the aerator.

CLEANING INSTALLATIONS

All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely
affect the finish and are not recommended for cleaning.

Do not use abrasive cleaners or solvents on Kohler faucets and fittings.

89098

836549

833438

834705**

1086390

834754

"LEAD FREE" is marked on the back of the faucet signifying its compliance with the United States AB1953

1230971-2A-D 2

**Color code must be specified when ordering

1230971-2A-D 3