Kohler LBPR6845 Specifications

Features
Automatic opening/closing lid for cleaner control.
Stainless-steel wand auto-cleanses before and after each use.
Hybrid heater technology provides instant and unlimited warm water for consistent comfort.
Separate front and rear nozzles for maximum comfort and personalization.
Oscillating wash covers a wider area of cleansing.
Turbo setting produces a massaging effect as water moves back and forth.
Air bubble wash offers a soft, gentle wash with effective cleansing.
Auto/child cleansing setting is convenient for the elderly or children.
Heated seat with adjustable temperature levels and warm air dryer.
Soft-close seat and lid prevent slamming.
Powerful, chemical-free, carbon filter air deodorizer automatically minimizes odors.
Technology
Blue LED lighting illuminates the bowl to serve as a night-light.
Backlit easy-touch remote control with LCD screen; can be wall-mounted.
Infrared (IR) occupied seat sensor with auto shutoff (includes override for use with adaptive devices).
Two-stage energy-saving feature.
Novita Round Cleansing Toilet Seat
BH93
Codes/Standards
None Applicable
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
N0
Installation
Fits most round-front toilets via quick-release brackets.
120 VAC electricity required.
Includes T-valve, hoses, washers, mounting plate, nuts, bolts, manual, remote control, and 2 AA batteries.
Components
Additional included component/s: Remote Control, and Supply Line.
USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com. 1-15-2018 13:17
32"
Novita Round Cleansing Toilet Seat
BH93
Required Electrical Service
One circuit required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
5-1/2" (140 mm)Seat-mounting holes: 51" (1295 mm)Power cord length:
Notes
Install this product according to the installation instructions.
Connect the seat to a cold water supply of drinking quality water at a pressure of 20 psi - 80 psi (139 kPa - 551 kPa).
Do not install this seat in a location where: (1) water might be splashed on the product or (2) excessive moisture, high humidity levels, or condensation is present. This will avoid damage to the electronic components.
NOTICE: Do not use an extension cord with this product.
NOTICE: Do not plug in the seat until instructed to do so in the installation guide. This will avoid possible product malfunction.
Locate the receptacle at least 6" (152 mm) above the floor, and within a 32" (813 mm) radius measured 2" (51 mm) from the bowl ledge.
USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com. 1-15-2018 13:17
Loading...