Page 1
72" x 36" drop-in/undermount whirlpool bath
Features
•
Six Flexjet® hydromassage jets can be individually adjusted for
water flow and direction.
•
Built-in heater.
•
Generous 72" length provides spacious bathing for up to two
people.
•
Integral lumbar support.
•
Multiple pump location options give you more choices for
installation and access. (See specification sheet for pump
locations.)
•
Textured bottom surface.
•
Single-speed whirlpool offers performance and value, with 6
fully adjustable jets.
Material
•
KOHLER® enameled cast iron.
Installation
•
Drop-in or undermount.
•
Reversible drain.
Required Products/Accessories
K-9696 Whirlpool 6-Jet Trim Kit
or
K-23856 1-1/2" cable pop-up bath drain
or
K-23857 Bath drain trim
Recommended Products/Accessories
K-1179 Vinyl Tiling-in Bead
K-1703 Whirlpool Remote Control
K-586 Under-Mount Installation Kit
K-1172 Adjustable feet
K-1491 Bath/Whirlpool Pillow
K-1601 Bath/Whirlpool Footstop
K-702200-G54 Frameless Sliding Bath Door
K-702200-G73 Frameless Sliding Bath Door
K-702200-L Frameless Sliding Bath Door
K-702205-L Frameless Sliding Bath Door
K-23726 Drain treatment
K-23725 Cast iron cleaner
Tea-for-Two
®
K-865-JHB
Codes/Standards
ASME A112.19.1/CSA B45.2
ASME A112.19.7/CSA B45.10
ASTM F462
UL 1795
CSA C22.2 No. 218.2
ADA
ICC/ANSI A117.1
KOHLER® Hydrotherapy Components
Five-Year Limited Warranty
KOHLER® Enameled Cast Iron Bath
and Shower Base Lifetime Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Biscuit96
DuneNY
Black Black™7
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-21-2020 18:09 - US/CA
Page 2
3/4"
(19 mm)
20-7/8"
(530 mm)
3/4"
(19 mm)
1/4"
(6 mm)
3-1/8"
(79 mm)
18-1/8"
(460 mm)
2-1/2"
(64 mm)
15-5/8"
(397 mm)
72" (1829 mm)
18"
(457 mm)
Lumbar Angle 23°
Blower Motor Access
20" (508 mm) W x 15" (381 mm) H Min
1-1/2"
Bath Drain
Drop-in Rim
Detail
36" (914 mm)
No change in measurements if connected
with drain illustrated. (K-7169AF)
Tea-for-Two
®
72" x 36" drop-in/undermount whirlpool bath
K-865-JHB
Required Electrical Service
Two dedicated circuits required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Outside North America,
this device may be known as a Residual Current Device (RCD).
120 V, 15 A, 60 HzPump:
120 V, 15 A, 60 HzHeater:
Technical Information
All product dimensions are nominal.
Drop-in, UndermountInstallation:
ReversibleDrain location:
49" x 22" (1245 mm x 559 mm)Basin area, bottom:
62" x 28" (1575 mm x 711 mm)Basin area, top:
455 lbs (206.4 kg)Weight:
Cutout:
Electrical component
rating:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-21-2020 18:09 - US/CA
69 lbs/ft² (336.9 kg/m²)Minimum floor load:
17" (432 mm)Water depth:
89 gal (336.9 L)Water capacity:
Drop-in, 70-1/4" x 34-1/2" (1784 mm x
876 mm)
Pump: 120 V, 7 A, 60 Hz
Heater: 120 V, 12 A, 60 Hz
SinglePump speed:
Notes
Measure your actual product for rough-in details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
ADA compliant when installed to the specific
requirements of these regulations.
Loading...