Page 1
Features
•
Includes face plate with Oyl handle.
•
Single handle controls both on/off activation and temperature
settings.
•
Provides temperature regulation and automatic anti-scald
protection.
•
Supplied with metal Industrial handle.
•
Coordinates with Components faucets and accessories to
complete your bathroom.
Material
•
Premium material construction with metal handle ensures
reliability and durability.
•
KOHLER finishes resist corrosion and tarnishing.
Technology
•
Pressure-balancing diaphragm technology maintains outlet
temperature within +/-3 degrees Fahrenheit during water
pressure fluctuations.
Installation
•
Trim only; requires valve to complete installation (sold
separately).
Required Products/Accessories
K-8304/K-P8304 Series Rite-Temp® Valve & Cartridge Kits
K-8300/K-P8300 Series Rite-Temp® Valve Body Rough-ins
or
K-2971-KS 3/4" Pressure-balancing Valve
Adapters, Rough-in and Extension Kits
Range: 3-5/8" (92 mm) - 4-3/8" (111 mm)1204798
Components
Rite-Temp® shower valve trim
K-TS78015-8
Codes/Standards
ASME A112.18.1/CSA B125.1
KOHLER® Faucet Lifetime Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
Polished ChromeCP
Vibrant® Brushed NickelBN
Matte BlackBL
™
Recommended Products/Accessories
K-23723 Faucet cleaner
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
8-10-2020 15:42 - US/CA/LM/MX
Page 2
*If 3-5/8" (92 mm) to
4-3/8" (111 mm) use
deep roughing-in kit.
Finished Wall
K-8300 Valve
Series
K-2971-KS,
K-304 Valves
Ø 6-3/8" (162 mm)
4-9/16" (116 mm)
Ø 2-1/8"
(54 mm)
Components
™
Rite-Temp® shower valve trim
K-TS78015-8
Technical Information
All product dimensions are nominal.
Notes
Install this product according to the installation
NoDrain included:
instructions.
NOTICE: Risk of product damage. Long screws
for installing trim can damage the K-2971-KS
valve. Consult the trim installation guide to verify
if the thin wall installation kit is needed.
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between the
valve and the wall-mount spout.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
8-10-2020 15:42 - US/CA/LM/MX
Loading...