Kohler LBPR3777 Specifications

Page 1
Features
CSA B651
OBC
Dual control wall-mounted.
Lever handles.
Stationary spout.
Less drain.
6-1/4" (159 mm) 35° spout from wall to center of drain.
1.2 gpm (4.5 lpm) maximum flow rate at 60 psi (4.14 bar).
Brass construction.
KOHLER finishes resist corrosion and tarnishing.
Required Products/Accessories
K-410-K Wall-mount Valve
Recommended Products/Accessories
K-23726 Drain treatment K-23723 Faucet cleaner
Purist
®
Wall-mount Bathroom Sink Faucet Trim
K-T14413-4
Optional Products/Accessories
K-7107 Decorative Drain K-7108 Decorative Drain K-7114 Pop-Up Drain K-7124 Pop-Up Clicker Drain K-7127 Drain K-7129 Drain
Codes/Standards
ASME A112.18.1/CSA B125.1 NSF/ANSI 61 NSF/ANSI 372 All applicable US Federal and State material regulations DOE - Energy Policy Act 1992 EPA WaterSense California Energy Commission (CEC) ADA ICC/ANSI A117.1 CSA B651 OBC
®
KOHLER® Faucet Lifetime Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
Polished ChromeCP
Vibrant® Polished NickelSN
Vibrant® Moderne Brushed GoldBGD
Vibrant® Brushed NickelBN
Vibrant® Brushed BronzeBV
Matte BlackBL
1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com. 7-24-2020 09:41 - US/CA
Page 2
4-3/8" (111 mm) Max 3-1/8" (79 mm) Min
6-3/4" (171 mm) Max 5-1/2" (140 mm) Min
2-5/8" (67 mm) Max 1-3/8" (35 mm) Min
3-1/2" (89 mm) Max 2-1/4" (57 mm) Min
Ø 2" (51 mm)
4" (102 mm)
9" (229 mm)
Finished Wall
5/8" OD Hot Supply
5/8" OD Cold Supply
5-1/2" (140 mm)
1-1/2" (38 mm)
1-1/2" (38 mm)
4-1/4" (108 mm)
5/8" (16 mm)
8-1/2" (216 mm)
15/16" (24 mm)
4" (102 mm)
3-1/2" (89 mm)
2-3/16" (56 mm)
Ø 2" (51 mm)
3-1/2" (89 mm)
15/16" (24 mm)
Purist
®
Wall-mount Bathroom Sink Faucet Trim
K-T14413-4
Technical Information
All product dimensions are nominal.
Faucet:
1.2 gal/min (4.5 l/min)Flow rate: 60 psi (4.1 bar)Pressure:
Spout:
6-3/4" (171 mm)Spout reach:
Notes
Install this product according to the installation guide.
The distance between the bottom of spout and top of the fixture rim must not be less than 1-1/2" (38 mm) and not greater than 6" (152 mm).
Three 1-1/2" (38 mm) diameter cutout holes are required for spout and handles.
ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com. 7-24-2020 09:41 - US/CA
Loading...