Page 1
Features
•
Hybrid heater technology provides instant and unlimited warm
water for consistent comfort.
•
Compact design is just over 5 inches high.
•
Stainless-steel wand auto-cleanses before and after each use.
•
Separate front and rear nozzles for maximum comfort and
personalization.
•
Adjustable nozzle position, water temperature, and water
pressure.
•
Oscillating wash covers a wider area of cleansing.
•
Turbo setting produces a massaging effect as water moves
back and forth.
•
Air bubble wash offers a soft, gentle wash with effective
cleansing.
•
Side-mounted control panel is accessible and easy to use.
•
Heated seat with three temperature levels and warm air dryer.
•
Sittable lid for convenience.
•
Soft-close seat and lid prevent slamming.
•
Powerful, chemical-free, carbon filter air deodorizer
automatically minimizes odors.
Technology
•
Infrared (IR) occupied seat sensor with auto shutoff (includes
override for use with adaptive devices).
•
Two-stage energy-saving feature.
KOHLER® Novita
Elongated bidet toilet seat
BN330
Codes/Standards
ASME A112.4.2/CSA B45.16
UL 1431
CSA C22.2 No. 64
CSA C22.2 No. 68
KOHLER® Intelligent Toilet and C3
Cleansing Seat Three-Year Limited
Warranty
See website for detailed warranty information.
®
Installation
•
Fits most elongated toilets via quick-release brackets.
•
Includes T-valve, hoses, washers, mounting plate, nuts, bolts,
and installation manual.
•
120 VAC electricity required.
Included Components
Additional Components:
Supply Line
Available Colors/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
Novita WhiteN0
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.NovitaSeats.com.
3-25-2020 05:51 - US/CA
Page 2
1-9/16"
(40 mm)
16-3/8"
(416 mm)
20-7/8"
(530 mm)
11-7/8"
(302 mm)
7-7/8"
(200 mm)
15-1/4" (387 mm)
17-11/16" (449 mm)
18-1/4"
(464 mm)
Min
19-3/4"
(502 mm)
Max
1-1/4"
(32 mm)
Min
5-1/2"
(140 mm)
Electrical Service Detail
32" (813 mm) R.
6" (152 mm) Min
2"
(51 mm)
13-1/4"
(337 mm)
Min
5" (127 mm)
KOHLER® Novita
Elongated bidet toilet seat
BN330
Required Electrical Service
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Outside North America,
this device may be known as a Residual Current Device (RCD).
120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.NovitaSeats.com.
3-25-2020 05:51 - US/CA
ElongatedSeat shape type:
Closed-frontSeat front type:
5-1/2" (140 mm)Seat-mounting holes:
51" (1295 mm)Power cord length:
Notes
Install this product according to the installation
instructions.
Connect the seat to a cold water supply of
drinking quality water at a pressure of 20 psi - 80
psi (139 kPa - 551 kPa).
Do not install this seat in a location where: (1)
water might be splashed on the product or (2)
excessive moisture, high humidity levels, or
condensation is present. This will avoid damage
to the electronic components.
NOTICE: Do not use an extension cord with this
product.
NOTICE: Do not plug in the seat until instructed
to do so in the installation guide. This will avoid
possible product malfunction.
Locate the receptacle at least 6" (152 mm) above
the floor, and within a 32" (813 mm) radius
measured 2" (51 mm) from the bowl ledge.
Loading...