Kohler LBPR3340 Specifications

Page 1
Features
Hybrid heater provides continuously heated water for consistent comfort.
Heated seat with five adjustable temperature settings.
Stainless steel wand with automatic UV-light self-sanitization.
LED lighting illuminates the bowl to serve as a nightlight.
Ergonomically designed side panel offers larger control buttons for comfortable control.
Front and rear wash modes provide warm water for cleansing.
Adjustable water temperature and water pressure.
Choose oscillating or pulsating spray.
Warm-air drying system with adjustable air speed and temperature.
Automatic deodorization with carbon filter for odor control.
Quiet-Close™ functionality to prevent seat from slamming.
Quick-Release™ functionality allows the seat to be removed quickly for easy cleaning.
Grip-Tight bumpers hold seat firmly in place.
Ergonomically designed for comfortable seating.
Material
Plastic.
Installation
Requires connection to toilet water supply line. All hoses and connections are included.
Included Components
Additional Components:
Inlet water supply hose Seat mounting bracket T-fitting
C³®-155
elongated cleansing toilet seat
K-8298
Codes/Standards
ASME A112.4.2/CSA B45.16 UL 1431 CSA C22.2 No. 64 CSA C22.2 No. 68
KOHLER® Intelligent Toilet and C3 Cleansing Seat Three-Year Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Biscuit96
®
1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com. 4-9-2020 06:32 - US/CA
Page 2
18-9/16" (471 mm) - 19-3/8" (492 mm)
8-3/8" (213 mm)
15-1/2" (394 mm)
Electrical Service Detail
32" (813 mm) R.
6" (152 mm) Min
2" (51 mm)
1-1/4" (32 mm) Min
5-1/2" (140 mm)
11-3/4" (298 mm)
20-5/8" (524 mm)
16-3/16" (411 mm)
13-1/4" (337 mm) Min
17-5/8" (448 mm)
2-3/16" (56 mm)
5-1/8" (130 mm)
C³®-155
elongated cleansing toilet seat
K-8298
Required Electrical Service
One dedicated circuit required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI). Outside North America, this device may be known as a Residual Current Device (RCD).
Technical Information
All product dimensions are nominal.
120 V, 15 A, 60 Hz
ElongatedSeat shape type: Closed-frontSeat front type: 5-1/2" (140 mm)Seat-mounting holes: 43" (1092 mm)Power cord length:
Notes
Install this product according to the installation guide.
Connect the seat to a cold water supply of drinking quality water at a pressure of 20 psi - 80 psi (139 kPa - 551 kPa).
Do not install this seat in a location where: (1) water might be splashed on the product or (2) excessive moisture, high humidity levels, or condensation is present. This will avoid damage to the electronic components.
Do not use an extension cord with this product. To avoid possible product malfunction, do not
plug in the seat until instructed to do so. Locate the recepticle at least 6" (152 mm) above
the floor, and within a 32" (813 mm) radius measured 2" (51 mm) from the bowl ledge.
1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com. 4-9-2020 06:32 - US/CA
Loading...