Rite-Temp® 1.75 gpm bath and shower trim
Features
•
Pressure-balancing diaphragm technology maintains outlet
temperature within +/-3 degrees Fahrenheit during water
pressure fluctuations.
•
Provides temperature regulation and automatic anti-scald
protection.
•
Single handle controls both on/off activation and temperature
setting.
•
Includes faceplate with ADA-compliant metal sculpted lever
handle.
•
Includes diverter bath spout with 1/2" NPT connection.
•
Includes single-function 1.75 gpm (gallons per minute)
showerhead with Katalyst® air-induction technology.
•
Showerhead features MasterClean™ sprayface for easy
cleaning.
•
Coordinates with Forté® faucets and accessories.
Material
•
Premium material construction with metal handle ensures
reliability and durability.
•
KOHLER finishes resist corrosion and tarnishing.
Installation
•
Trim set requires valve to complete installation (sold separately).
Forté
K-TS10274-4G
Codes/Standards
ASME A112.18.1/CSA B125.1
DOE - Energy Policy Act 1992
EPA WaterSense
California Energy Commission (CEC)
®
®
Required Products/Accessories
K-304/K-P304 Series Rite-Temp® Valves
or
K-8304/K-P8304 Series Rite-Temp® Valve & Cartridge Kits
or
K-8300/K-P8300 Series Rite-Temp® Valve Body Rough-ins
K-8305/K-P8305 Series Rite-Temp® Cartridges
or
K-2971-KS 3/4" Pressure-balancing Valve
Adapters, Rough-in and Extension Kits
Range: 3-1/2" (89 mm) - 4-1/4" (108 mm)GP1025388
Optional Products/Accessories
K-10351 Test Cap For K-8300 Series Valve Bodies
Included Components
Additional Components:
Shower arm and flange
KOHLER® Faucet Lifetime Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
Polished ChromeCP
Vibrant® Brushed NickelBN
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
11-14-2019 05:32 - US/CA
Ø 2"
(51 mm) Max
5-1/4"
(133 mm)
Ø 3"
(76 mm)
5" (127 mm)
2-7/8"
(73 mm)
Ø 6-1/2"
(165 mm)
7-15/16"
(202 mm)
Typical
4-9/16"
(116 mm)
1/2"
NPT
Ø 2-1/2"
(64 mm)
Threaded Spout:
Extend 1/2" NPT pipe 4-5/16"
(110 mm) from finished wall.
K-2971-KS,
K-304 Valves
K-8300 Valve
Series
Finished Wall
*If 3-1/2" (89 mm) to
4-1/4" (108 mm) use
deep roughing-in kit.
Forté
®
Rite-Temp® 1.75 gpm bath and shower trim
K-TS10274-4G
Technical Information
All product dimensions are nominal.
NoDrain included:
Showerhead/Body Spray:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
11-14-2019 05:32 - US/CA
1.75 gal/min (6.6 l/min)Rated maximum flow:
80 psi (5.5 bar)Pressure:
Notes
For use with automatic compensating valves rated
at 1.5 gal/min (5.7 l/min) or less.
Install this product according to the installation
instructions.
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between the
valve and the wall-mount spout.
NOTICE: Risk of product damage. Long screws,
for installing trim, can damage the K-2971-KS
valve. Consult the trim installation guide to verify
if the thin wall installation kit is needed.
Loading...