1.75 gpm Rite-Temp® bath and shower trim
Features
•
Includes lever handle, single-function showerhead, shower arm
and flange, valve trim, and non-diverter tub spout with NPT or
slip-fit connection.
•
Single lever handle allows for both on/off activation and
temperature setting.
•
Rite-Temp® pressure-balancing technology maintains water
temperature within +/-3 degrees Fahrenheit.
•
High-temperature limit stop allows you to preset a comfortable
maximum temperature to eliminate scalding.
•
Integrated push-button diverter.
•
1.75 gpm (gallons per minute) showerhead with Katalyst® spray
technology.
Material
•
Premium material construction for durability and reliability.
•
KOHLER finishes resist corrosion and tarnishing.
Installation
•
Trim only; requires K-11748-K or K-11748-KS Rite-Temp
pressure-balancing valve (sold separately).
Required Products/Accessories
K-11748 Series Rite-Temp® Valves
Adapters, Rough-in and Extension Kits
Range: 3-1/2" (89 mm) - 4-1/4" (108 mm)1226074-*
Honesty
K-T99763-4G
Codes/Standards
ASME A112.18.1/CSA B125.1
DOE - Energy Policy Act 1992
EPA WaterSense
California Energy Commission (CEC)
KOHLER® Faucet Lifetime Limited
Warranty
See website for detailed warranty information.
®
®
Available Colors/Finishes
Color tiles intended for reference only.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
11-5-2019 05:47 - US/CA
DescriptionCodeColor
Polished ChromeCP
Finished Wall
*If 3-1/2" (89 mm) to
4-1/4" (108 mm) use
deep roughing-in kit.
1-13/16"
(46 mm)
6-1/2"
(165 mm)
1/2"
NPT
6-1/2"
(165 mm)
4-1/2"
(114 mm)
6-9/16" (167 mm)
Typical
1-5/8"
(41 mm)
4-1/16"
(103 mm)
3-3/16"
(81 mm)
6-5/8"
(168 mm)
Ø 2"
(51 mm)
Max
Slip-fit Spout:
Extend 5/8" OD tube 5-9/16"
(141 mm) from finished wall.
Threaded Spout:
Extend 1/2" NPT pipe 5-9/16"
(141 mm) from finished wall.
K-11748 Valves
Honesty
®
1.75 gpm Rite-Temp® bath and shower trim
K-T99763-4G
Technical Information
All product dimensions are nominal.
NoDrain included:
Showerhead/Body Spray:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
11-5-2019 05:47 - US/CA
1.75 gal/min (6.6 l/min)Rated maximum flow:
80 psi (5.5 bar)Pressure:
Notes
For use with automatic compensating valves rated
at 1.6 gal/min (6.1 l/min) or less.
Install this product according to the installation
instructions.
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between the
valve and the wall-mount spout.
Loading...