Page 1
Features
•
18-inch minimum base cabinet width.
•
Single bowl.
•
7-1/2-inch depth.
•
No faucet holes.
Material
•
KOHLER® enameled cast iron.
Installation
•
Top-mount or under-mount.
Recommended Products/Accessories
K-9000 P-Trap
K-5184 Stainless steel sink rack, 12-7/8" x 14-11/16"
K-8801 Sink Strainer
K-8799 Sink Strainer
Iron/Tones
Top-/Under-Mount Kitchen Sink
K-6584
Codes/Standards
ASME A112.19.1/CSA B45.2
®
Optional Products/Accessories
K-3294 Cutting Board
K-3277 Sink Basket
Included Components
Product consists of:
52047 Clamp Accessory Pack, 4 Ea.
KOHLER® Enameled Cast Iron Kitchen
Sink Lifetime Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Sea Salt™FF
Biscuit96
Almond47
Cane Sugar™FD
DuneNY
SunlightY2
Ice™ Grey95
SandbarG9
CashmereK4
BasaltFT
Thunder™ Grey58
Iron Cobalt30
Black 'n TanKA
CaviarFP
Black Black™7
Grey LavenderGRL
Indigo BlueDGB
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-12-2019 05:29 - US/CA
Page 2
18-3/4"
Iron/Tones
®
Top-/Under-Mount Kitchen Sink
K-6584
Technical Information
All product dimensions are nominal.
SingleBowl configuration:
Top-mount, Under-mountInstallation:
18" (457 mm)Min. base cabinet
width:
Bowl area:
Length: 14" (356 mm)
Width: 16" (406 mm)
Bowl depth: 7-1/2" (191 mm)
3-7/8" (98 mm)Drain hole:
114332-7, required, includedTemplate:
Notes
Install this product according to the installation
instructions.
Refer to install instructions included with fixture
before beginning installation.
Supplied bowl clamp assemblies require 1" (25
mm) minimum countertop thickness. Installer
must supply hardware for thinner countertops.
For multiple bowl under-mount installations, a
minimum distance of 3-3/8" (86 mm) is required
between bowls. Countertop supplier to determine
required support.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-12-2019 05:29 - US/CA
Loading...