floor-mount bath filler trim with handshower
Features
•
Single lever handle allows for both on/off activation and
temperature setting.
•
KOHLER ceramic disc valves exceed industry longevity
standards for a lifetime of durable performance.
•
Includes Artifacts® single-function handshower and a 60-inch
hose.
•
8 gpm maximum flow rate (30 l/min) @ 45 psi.
•
1.75 gpm (gallons per minute) flow rate for handshower.
•
Coordinates with Artifacts® faucets, accessories and showering
components to complete your bathroom.
•
Requires K-97339 mounting-block.
Material
•
Premium metal construction.
•
KOHLER finishes resist corrosion and tarnishing.
Installation
•
Floor-mount.
•
Compatibility with tub varies by application.
Required Products/Accessories
K-97339 Multiproduct Mounting-block
Included Components
Additional Components:
K-72776 Single-function Showerhead
Artifacts
K-T72790-9M
Codes/Standards
ASME A112.18.1/CSA B125.1
DOE - Energy Policy Act 1992
EPA WaterSense
California Energy Commission (CEC)
KOHLER® Faucet Lifetime Limited
Warranty
See website for detailed warranty information.
®
®
Available Colors/Finishes
Color tiles intended for reference only.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-11-2019 05:48 - US/CA
DescriptionCodeColor
Polished ChromeCP
Vibrant® Polished NickelSN
Vibrant® Brushed NickelBN
Vibrant® Brushed BronzeBV
Oil-Rubbed Bronze2BZ
Vintage NickelVNT
2-3/4"
Artifacts
®
floor-mount bath filler trim with handshower
K-T72790-9M
Technical Information
All product dimensions are nominal.
Faucet:
8 gal/min (30.3 l/min)Flow rate:
45 psi (3.1 bar)Pressure:
CompositeValve body:
NoDrain included:
Spout:
8-7/16" (214 mm)Spout reach:
Handshower:
1.75 gal/min (6.6 l/min)Rated maximum flow:
80 psi (5.5 bar)Pressure:
Notes
Install this product according to the installation
instructions.
Adequate floor support is required.The wood
support must be a minimum of 2" (51 mm) thick
by 6" (152 mm) wide. 2x6 lumber is NOT
adequate for this application.
Concrete can be used as the floor support.
Requires 3/16" masonry drill bit and six 1/4" x
1-3/4" concrete screws, not included.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-11-2019 05:48 - US/CA
Loading...