Page 1
Features
CSA B651
•
Includes face plate with handle, shower arm with flange.
•
Single handle controls both on/off activation and temperature
setting.
•
Supplied with ADA compliant metal lever handle.
•
Includes diverter bath spout with combination 1/2" NPT or slip
fit connection.
•
For use with any KOHLER showerhead (not supplied).
•
Complements the Kelston® faucet and accessory collections.
Material
•
Premium material construction with metal handle ensures
reliability and durability.
•
KOHLER finishes resist corrosion and tarnishing, exceeding
industry durability standards.
Kelston
®
Rite-Temp® Bath and Shower Valve Trim
K-TLS13492-4
Installation
•
Trim set requires valve to complete installation.
Required Products/Accessories
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
or
K-304/K-P304 Series Rite-Temp® Valves
Codes/Standards
ASME A112.18.1/CSA B125.1
California Energy Commission (CEC)
ADA
ICC/ANSI A117.1
CSA B651
KOHLER® Faucet Lifetime Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
Polished ChromeCP
Vibrant® Brushed NickelBN
Oil-Rubbed Bronze2BZ
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
1-31-2019 19:56 - US/CA
Page 2
2-1/4"
Kelston
®
Rite-Temp® Bath and Shower Valve Trim
K-TLS13492-4
Technical Information
All product dimensions are nominal.
Notes
Install the product according to the installation
guide.
NOTICE: Risk of product damage. Long screws
for installing trim can damage the K-2971-KS
valve. Consult the trim installation guide to verify
if the thin wall installation kit (88526) is needed.
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between the
valve and the wall-mount spout. Elbow must be
a 90 degree drop ell that is secured to rigid
framing.
ADA, CSA B651 compliant when installed to the
specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
1-31-2019 19:56 - US/CA
Loading...