Page 1
Features
CSA B651
OBC
•
Elongated bowl
•
1-1/2" rear spud.
•
10" x 7" water surface size.
•
Also available with antimicrobial finish K-96058-SS.
•
Glazed 2-1/8" trapway.
Material
•
Vitreous china.
Technology
•
Designed to outperform competitors in bowl cleanliness and
plug resistance.
•
Maximum waste removal.
•
Engineered for toilet seat cover removal.
•
Excellent bowl rinse.
•
Engineered to flush effectively in buildings with low supply
pressure and flow*.
•
Maximum drain line carry at all flush volumes per ASME
Standard.
Installation
•
26-1/8" L x 14-5/8" W x 16-5/8" H
•
11" rough-in.
•
Replaces Highcrest K-4301 and Highcliff K-4367. Height and
footprint may vary.
Water Conservation & Rebates
•
1.28 to 1.6 gpf flush range (1.28 and 1.6 gpf).
•
WaterSense compliant when used with a 1.28 gpf WaterSense
flushometer.
Highcliff™ Ultra
Elongated Floor Mount Flushometer Bowl
K-96058
Codes/Standards
ASME A112.19.2/CSA B45.1
DOE - Energy Policy Act 1992
EPA WaterSense
California Energy Commission (CEC)
ADA
ICC/ANSI A117.1
CSA B651
OBC
KOHLER® One-Year Limited Warranty
See website for detailed warranty information.
®
Included Components
Additional Components:
Bolt Cap Accessory Pack
Spud
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-10-2019 09:55 - US/CA
Available Colors/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Biscuit96
Almond47
Black Black™7
Page 2
26-1/8" (664 mm)
Highcliff™ Ultra
Elongated Floor Mount Flushometer Bowl
K-96058
Technical Information
All product dimensions are nominal.
Flushometer, Floor-mountToilet type:
FloorWaste Outlet:
ElongatedBowl shape:
Flushometer valve siphonFlush type:
1-1/2", Inlet, TopSpud size:
2-1/8" (54 mm)Trap passageway:
Water Consumption
1.28 gpf (4.8 lpf) or 1.6 gpf (6 lpf)Full:
10" x 7" (254 mm x 178 mm)Water surface size:
6" (152 mm)Rim to water surface:
11Rough-in:
5-1/2" (140 mm)Seat-mounting holes:
Fixture Supply Requirements
35 psi (241.3 kPa)Min static pressure:
80 psi (551.6 kPa)Max static pressure:
25 psi (172.4 kPa)Min flowing pressure:
25 gpm (94.6 lpm)Min flow rate:
Notes
Install this product according to the installation
instructions.
For back-to-back toilet installations: Use only a
45° double wye fitting.
Requires flushometer valve to match desired
water consumption 1.28 gpf (4.8 lpf) or 1.6 gpf
(6 lpf).
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
Plumbing codes may require elongated toilets
and elongated, open-front seats in public
bathrooms.
Accessibility standards may require controls to
be located on the open side of the toilet.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-10-2019 09:55 - US/CA
Loading...