Page 1
RiverBath
Features
•
4 Riverjets and 8 hydromassage jets can be individually
adjusted for water flow and direction.
•
Two variable-speed pumps for adjusting massage intensity.
•
Built-in heater.
•
Lighted keypad control.
•
Floating remote control.
•
Integral fill with factory-installed faucet valves.
•
Spacious design accommodates multiple bathers.
•
Drilled for grab bars (required); sold separately.
•
Jet trim kit (required); sold separately.
•
Three pillows provide extra comfort.
Material
•
Acrylic.
Hydrotherapy
•
RiverBath Whirlpool.
Installation
•
Drop-in.
Required Products/Accessories
K-9398 Whirlpool Trim Kit
K-9669 Hand Grab Bars
K-T9540-4 Transfer Valve Trim
Recommended Products/Accessories
K-7167 2" adjustable pop-up drain
K-23726 Drain treatment
K-23732 Tub & shower cleaner
Codes/Standards
ASME A112.19.7/CSA B45.10
CSA B45.5/IAPMO Z124
ASTM E162
ASTM E662
UL 1795
CSA C22.2 No. 218.2
KOHLER® Plastic Baths and
Receptors Lifetime Limited
WarrantyKOHLER® Hydrotherapy
Components Five-Year Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
Color Code Description
0 White
96 Biscuit
®
75" x 45" drop-in whirlpool bath w/ integral fill
K-1360-H3
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-29-2021 15:24 - US/CA
Page 2
RiverBath
3"
(76 mm)
25"
(635 mm)
Pump/Control Access
45" (1143 mm) W x
18" (457 mm) H Min
2-1/2"
(64 mm)
Transfer Valve
(Supplied)
Handshower
1-1/4" (32 mm)D. Hole
(Not Supplied)
Valve Detail
3/4" (19 mm) D.
Supply To Valves
Hot/Valve
(Supplied)
Cold/Valve
(Supplied)
21-5/8"
(549 mm)
No change in measurements with drain
shown. (K-7167)
3" (76 mm)
3-1/2"
(89 mm)
17-1/2" (445 mm)
75" (1905 mm)
11-1/2" (292 mm)
2"
(51 mm)
7" (178 mm)
1-1/4"
(32 mm)
11/16"
(17 mm)
45"(1143 mm)
2-3/4"
(70 mm)
10"
(254 mm)
32-3/4"
(832 mm)
2" Bath Drain
Lumbar
Angle 13°
Required Electrical Service
Two dedicated circuits required, protected with Class A GroundFault Circuit-Interrupter (GFCI). Outside North America, this
device may be known as a Residual Current Device (RCD).
Pump, Pump: 240 V, 20 A, 50/60 Hz
Heater: 240 V, 20 A, 50/60 Hz
Technical Information
All product dimensions are nominal.
Installation: Drop-in
Drain location: Center
Basin area, bottom: 46" x 34" (1168 mm x 864 mm)
Basin area, top: 57" x 37" (1448 mm x 940 mm)
Weight: 215 lbs (97.5 kg)
Minimum floor load: 62 lbs/ft² (302.7 kg/m²)
Water depth: 20" (508 mm)
Water capacity: 149 gal (564 L)
Template: Drop-in, 1000153-7, required, included
Electrical component
rating:
Pump: 240 V, 9 A, 50/60 Hz
Pump: 240 V, 9 A, 50/60 Hz
Heater: 240 V, 17 A, 50/60 Hz, 4000 W
Pump speed: Variable
Notes
Measure your actual product for rough-in
details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Consult local and national codes for minimum
air gap requirements when installing a spout on
the faucet deck other than that supplied.
®
75" x 45" drop-in whirlpool bath w/ integral fill
K-1360-H3
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-29-2021 15:24 - US/CA
Loading...