Kohler KOH20629 Specifications

Page 1
Features
Acrylic
Under-mount installation.
Reversible drain and slotted overflow for maximum bathing depth.
Two raised corner seats, at 6-3/4" (171 mm) and 11-7/8" (302 mm) from bath floor.
122 BubbleMassage™ airjets and eight Flexjet® whirlpool jets.
With Zones of Control™ feature.
Variable speed pump with 1.5 kW heater and back-lit user control.
Molded lumbar support for comfort.
Extra deep 27-1/2" (699 mm) soaking depth.
Less all trim.
48" (1219 mm) x 48" (1219 mm) x 34" (864 mm)
Required Accessories
K-578 Under-mount kit K-9698 Flexjet® Whirlpool Trim Kit
Underscore
®
Cube BubbleMassage™Whirlpool Bath
K-1969-XH2G
For complete listing of available colors, go to
kohler.com.
Codes/Standards
ASME A112.19.7/CSA B45.10 ASTM E162 ASTM E662 UL 1795 CSA 22.2 No. 218.2 CSA B45.5/IAPMO Z124
Kohler One-Year Limited Warranty
See website for detailed warranty information.
Product Specification
Bath shall be 48" (1219 mm) in length, 48" (1219 mm) in width, and 34" (864 mm) in height. Bath shall be made of acrylic. Bath shall have 122 BubbleMassage™ airjets, Zones of Control feature, and molded lumbar support for comfort. Bath shall have blower motor with 300 W heater, electronic user control, and remote control, and variable speed pump with 1.5 kW heater and back-lit user control. Bath shall f eature extr a deep 27-1/2" (699 mm) soaking depth, two raised corner seats at 6-3/4" (171 mm) and 11-7/8" (302 mm), reversib le drain, and slotted overflo w for maximum bathing depth. Bath shall be for under-mount installation. Bath shall be less all trim. Bath shall be Kohler Model K-1969-XH2G.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
12-6-2013 14:16
Page 2
Blower Motor/Control Access
Underscore
®
Cube BubbleMassage™Whirlpool Bath
K-1969-XH2G
All measurements are approximate only.
UndermountInstallation: 39-3/8" x 39-3/8" (1000 mm x 1000 mm)Basin area, bottom: 44-5/8" x 44-5/8" (1133 mm x 1133 mm)Basin area, top: 218 lbs (98.9 kg)Weight: 27-1/2" (699 mm)Water depth: 171 gal (647.3 L)Water capacity:
Electrical rating:
Blower: 220-240 V, 5 A, 50/60 Hz Pump: 220-240 V, 11 A, 50/60 Hz Heater: 220-240 V, 50/60 Hz, 1500 W
102.3 lbs/ft² (499.5 kg/m²)Minimum floor load:
Required Electrical Service
Dedicated circuit required, protected with Class A Ground-Fault Circuit-Interruptor (GFCI) or Residual Current Device (RCD).
220-240 V, 20 A, 50/60 Hz, dedicatedBlower, Pump,
Heater:
Installation NotesTechnical Information
Measure your actual product for roughing-in details. IMPORTANT! This product is intended for under-mount installation only. IMPORTANT! Install this product according to the installation guide.There are 1" (25 mm) or 4" (102 mm) protrusions beyond the rim of the bath on three sides of this unit. Modify the framing as needed. IMPORTANT! Dry fit the drain assembly prior to installing the bath.The bath cannot be installed with all drain components attached.
Hot water supply should be 70% of capacity or greater. Installations will vary.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
12-6-2013 14:16
Loading...