Page 1
TEA-FOR-TWO
®
Features
Cast iron with Safeguard
•
Blower motor with 300 W heater and electronic
•
back-lit user control
44 BubbleMassage
•
40 BubbleMassageTM airjets with chromatherapy
•
18 levels of airflow adjustability
•
With Zones of Control
•
features
71-3/4″ (1822 mm) x 36″ (914 mm) x 20-7/8″
•
(530 mm)
TM airjets less chromatherapy
finish
®
TM, surge, and automatic purge
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.1/CSA B45.2
•
ASME A112.19.7
•
CSA C22.2 No 218.2
•
UL 1795
•
Specified Model
6’ (1.8 m) BUBBLEMASSAGETM BATH
K-865-G
ALSO K-865-GC
Colors/Finishes
0: White
•
CP: Polished Chrome
•
NA: None applicable
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Airjet Trim Color Colors/Finishes
K-865-G 6’ (1.8 m) BubbleMassage bath – less
chromatherapy
K-865-GC 6’ (1.8 m) BubbleMassage bath – with
chromatherapy
Required Accessories
K-7169-AF Pop-up bath drain ❑ CP ❑ Other_____
Optional Accessories
K-582 Undermount installation kit (template and installation guide) ❑ NA
K-1491 Removable pillow ❑ 0 ❑ Other_____
K-1601 Removable footstop ❑ 0 ❑ Other_____
K-1705 Remote control ❑ NA
K-9498 3″ (76 mm) keypad trim ❑ CP ❑ Other_____
❑ CP ❑ Other_____ ❑ 0 ❑ Other_____
❑ CP ❑ Other_____ ❑ 0 ❑ Other_____
Product Specification
The BubbleMassage bath shall be made of cast iron with Safeguard finish. Bath shall be 71-3/4″ (1822 mm) in length, 36″ (914
mm) in width, and 20-7/8″ (530 mm) in height. Bath shall have 44 BubbleMassage airjets less chromatherapy or 40
BubbleMassage airjets with chromatherapy. Bath shall have a blower motor with 300 W heater and electronic back-lit user
control. Bath shall have 18 levels of airflow adjustability. Bath shall be with Zones of Control, surge, and automatic purge
features. Bath shall be Kohler Model K-865-G____-____ or K-865-GC____-____.
Page 1 of 2
1146823-4-
USA/Canada: 1-800-4KOHLER
C
(1-800-456-4537)
www.kohler.com
Page 2
TEA-FOR-TWO
Technical Information
®
Required Electrical Service
Fixture*:
Bathing well:
Basin area,
bottom
Basin area, top 62″ (1575 mm) x 28″ (711 mm)
Weight 455 lbs (206.4 kg)
To overflow:
Water depth 17″ (432 mm)
Capacity 89 gal (336.9 L)
* Approximate measurements for comparison only.
Drop-in cut-out 70-1/4″ (1784 mm) x 34-1/2″ (876 mm)
Cut-out for
undermount
Blower
motor:
Heater V Hz A
300 W 220-240 50/60 3
3-1/2"
(89 mm)
49″ (1245 mm) x 22″ (559 mm)
K-582
71-3/4" (1822 mm)
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor/control 220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
NOTICE: If the blower motor and check valve are
relocated, two access panels are required. Locate one
access panel at the blower motor/control location and the
other at the control box. Locate the blower motor and check
valve together.
Floor support under bath must provide for a minimum of 69
lbs/square foot (333 kg/square meter) loading.
Splitting the deck/surround is recommended if installing into a
deck.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
No change in measurements if connected
with drain illustrated. (K-7169-AF)
18"
(457 mm)
2-1/2"
(64 mm)
2-7/8"
(73 mm)
15-5/8"
(397 mm)
3" (76 mm)
1/4" (6 mm)
Product Diagram
Blower Motor/Control Access
34" (864 mm) W x
15" (381 mm) H
36" (914 mm)
3/4"
(19 mm)
1-1/2" OD
20-7/8"
(530 mm)
TEA-FOR-TWO®6’ (1.8 m) BUBBLEMASSAGETM BATH
Page2of2
1146823-4-
C
Loading...